Ubuntu Manpage: slurmdbd.conf - Slurm Database Daemon (SlurmDBD) configuration file

Provided by: slurmdbd_23.11.4-1.2ubuntu5_amd64

NAME

       slurmdbd.conf - Slurm Database Daemon (SlurmDBD) configuration file

DESCRIPTION

slurmdbd.conf is an ASCII file which describes Slurm Database Daemon (SlurmDBD) configuration
information. The file will always be located in the same directory as the slurm.conf.

The contents of the file are case insensitive except for the names of nodes and files. Any text following
a "#" in the configuration file is treated as a comment through the end of that line. Changes to the
configuration file take effect upon restart of SlurmDBD or daemon receipt of the SIGHUP signal unless
otherwise noted.

This file should be only on the computer where SlurmDBD executes and should only be readable by the user
which executes SlurmDBD (e.g. "slurm"). If the slurmdbd daemon is started as user root and changes to
another user ID, the configuration file will initially be read as user root, but will be read as the
other user ID in response to a SIGHUP signal. This file should be protected from unauthorized access
since it contains a database password. The overall configuration parameters available include:

AllResourcesAbsolute
When adding a resource (license) treat allocated/allowed counts as absolute numbers instead of
percentage numbers. Boolean, yes to turn on, no (default) to use the numbers as percentages
instead.

AllowNoDefAcct
Remove requirement for users to have a default account. Boolean, yes to turn on, no (default) to
enforce default accounts.

ArchiveDir
If ArchiveScript is not set the slurmdbd will generate a file that can be read in anytime with
sacctmgr load filename. This directory is where the file will be placed after a purge event has
happened and archive for that element is set to true. Default is /tmp. The format for this files
name is $ArchiveDir/$ClusterName_$ArchiveObject_archive_$BeginTimeStamp_$endTimeStamp We limit
archive files to 50000 records per file. If more than 50000 records exist during that time period,
they will be written to a new file. Subsequent archive files during the same time period will
have ".<number>" appended to the file, for example .2, with the number increasing by one for each
file in the same time period.

ArchiveEvents
When purging events also archive them. Boolean, yes to archive event data, no otherwise. Default
is no.

ArchiveJobs
When purging jobs also archive them. Boolean, yes to archive job data, no otherwise. Default is
no.

ArchiveResvs
When purging reservations also archive them. Boolean, yes to archive reservation data, no
otherwise. Default is no.

ArchiveScript
This script can be executed every time a rollup happens (every hour, day and month), depending on
the Purge*After options. This script is used to transfer accounting records out of the database
into an archive. It is used in place of the internal process used to archive objects. The script
is executed with no arguments, and the following environment variables are set.

SLURM_ARCHIVE_EVENTS
1 for archive events 0 otherwise.

SLURM_ARCHIVE_LAST_EVENT
Time of last event start to archive.

SLURM_ARCHIVE_JOBS
1 for archive jobs 0 otherwise.

SLURM_ARCHIVE_LAST_JOB
Time of last job submit to archive.

SLURM_ARCHIVE_STEPS
1 for archive steps 0 otherwise.

SLURM_ARCHIVE_LAST_STEP
Time of last step start to archive.

SLURM_ARCHIVE_SUSPEND
1 for archive suspend data 0 otherwise.

SLURM_ARCHIVE_TXN
1 for archive transaction data 0 otherwise.

SLURM_ARCHIVE_USAGE
1 for archive usage data 0 otherwise.

SLURM_ARCHIVE_LAST_SUSPEND
Time of last suspend start to archive.

ArchiveSteps
When purging steps also archive them. Boolean, yes to archive step data, no otherwise. Default
is no.

ArchiveSuspend
When purging suspend data also archive it. Boolean, yes to archive suspend data, no otherwise.
Default is no.

ArchiveTXN
When purging transaction data also archive it. Boolean, yes to archive transaction data, no
otherwise. Default is no.

ArchiveUsage
When purging usage data (Cluster, Association and WCKey) also archive it. Boolean, yes to archive
transaction data, no otherwise. Default is no.

AuthInfo
Additional information to be used for authentication of communications with the Slurm control
daemon (slurmctld) on each cluster. The interpretation of this option is specific to the
configured AuthType. In the case of auth/munge, this can be configured to use a Munge daemon
specifically configured to provide authentication between clusters while the default Munge daemon
provides authentication within a cluster. In that case, this will specify the pathname of the
socket to use. Per default this value is left unspecified, which results in the default
authentication mechanism being used.

AuthAltTypes
Command separated list of alternative authentication plugins that the slurmdbd will permit for
communication.

AuthAltParameters
Used to define alternative authentication plugins options. Multiple options may be comma
separated.

jwks= Absolute path to JWKS file. Key should be owned by SlurmUser or root, must be readable by
SlurmUser, with suggested permissions of 0400. It must not be writable by 'other'. Only
RS256 keys are supported, although other key types may be listed in the file. If set, no
HS256 key will be loaded by default (and token generation is disabled), although the
jwt_key setting may be used to explicitly re-enable HS256 key use (and token generation).

jwt_key=
Absolute path to JWT key file. Key must be HS256. Key should be owned by SlurmUser or root,
must be readable by SlurmUser, with suggested permissions of 0400. It must not be
accessible by 'other'.

AuthType
Define the authentication method for communications between Slurm components. Acceptable values
at present include "auth/munge", which is the default. "auth/munge" indicates that LLNL's MUNGE
system is to be used (this is the supported authentication mechanism for Slurm; see
"https://dun.github.io/munge/" for more information). SlurmDBD must be terminated prior to
changing the value of AuthType and later restarted.

CommitDelay
How many seconds between commits on a connection from a Slurmctld. This speeds up inserts into
the database dramatically. If you are running a very high throughput of jobs you should consider
setting this. In testing, 1 second improves the slurmdbd performance dramatically and reduces
overhead. There is a small probability of data loss though since this creates a window in which
if the slurmdbd exits abnormally for any reason the data not committed could be lost. While this
situation should be very rare, it does present an extremely small risk, but may be the only way to
run in extremely heavy environments. In all honesty, the risk is quite low, but still present.

CommunicationParameters
Comma separated options identifying communication options.

DisableIPv4 Disable IPv4 only operation for the slurmdbd. This should also be set in your
slurm.conf file.

EnableIPv6 Enable using IPv6 addresses for the slurmdbd. When using both IPv4 and IPv6,
address family preferences will be based on your /etc/gai.conf file. This should
also be set in your slurm.conf file.

keepaliveinterval=#
Specifies the interval between keepalive probes on the socket communications
between the backup and primary slurmdbd. The default value is 30 seconds.

keepaliveprobes=#
Specifies the number of keepalive probes sent on the socket communications between
the backup and primary slurmdbd. The default value is 3.

keepalivetime=#
Specifies how long to wait before sending keepalive probes between the primary and
backup slurmdbd processes. The default value is 30 seconds.

DbdBackupHost
The short, or long, name of the machine where the backup Slurm Database Daemon is executed (i.e.
the name returned by the command "hostname -s"). This host must have access to the same
underlying database specified by the 'Storage' options mentioned below.

DbdAddr
Name that DbdHost should be referred to in establishing a communications path. This name will be
used as an argument to the getaddrinfo() function for identification. For example, "elx0000" might
be used to designate the Ethernet address for node "lx0000". By default the DbdAddr will be
identical in value to DbdHost.

DbdHost
The short, or long, name of the machine where the Slurm Database Daemon is executed (i.e. the name
returned by the command "hostname -s"). This value must be specified.

DbdPort
The port number that the Slurm Database Daemon (slurmdbd) listens to for work. The default value
is SLURMDBD_PORT as established at system build time. If no value is explicitly specified, it will
be set to 6819. This value must be equal to the AccountingStoragePort parameter in the slurm.conf
file.

DebugFlags
Defines specific subsystems which should provide more detailed event logging. Multiple subsystems
can be specified with comma separators. Most DebugFlags will result in additional logging
messages for the identified subsystems if DebugLevel is at 'verbose' or higher. More logging may
impact performance. Valid subsystems available today (with more to come) include:

DB_ARCHIVE
SQL statements/queries when dealing with archiving and purging the database.

DB_ASSOC
SQL statements/queries when dealing with associations in the database.

DB_EVENT
SQL statements/queries when dealing with (node) events in the database.

DB_JOB SQL statements/queries when dealing with jobs in the database.

DB_QOS SQL statements/queries when dealing with QOS in the database.

DB_QUERY
SQL statements/queries when dealing with transactions and such in the database.

DB_RESERVATION
SQL statements/queries when dealing with reservations in the database.

DB_RESOURCE
SQL statements/queries when dealing with resources like licenses in the database.

DB_STEP
SQL statements/queries when dealing with steps in the database.

DB_TRES
SQL statements/queries when dealing with trackable resources in the database.

DB_USAGE
SQL statements/queries when dealing with usage queries and inserts in the database.

DB_WCKEY
SQL statements/queries when dealing with wckeys in the database.

FEDERATION
SQL statements/queries when dealing with federations in the database.

Network
Network details.

NetworkRaw
Dump raw hex values of key Network communications.

DebugLevel
The level of detail to provide the Slurm Database Daemon's logs. The default value is info.

quiet Log nothing

fatal Log only fatal errors

error Log only errors

info Log errors and general informational messages

verbose Log errors and verbose informational messages

debug Log errors and verbose informational messages and debugging messages

debug2 Log errors and verbose informational messages and more debugging messages

debug3 Log errors and verbose informational messages and even more debugging messages

debug4 Log errors and verbose informational messages and even more debugging messages

debug5 Log errors and verbose informational messages and even more debugging messages

DebugLevelSyslog
The slurmdbd daemon will log events to the syslog file at the specified level of detail. If not
set, the slurmdbd daemon will log to syslog at level fatal, unless there is no LogFile and it is
running in the background, in which case it will log to syslog at the level specified by
DebugLevel (at fatal in the case that DebugLevel is set to quiet) or it is run in the foreground,
when it will be set to quiet.

quiet Log nothing

fatal Log only fatal errors

error Log only errors

info Log errors and general informational messages

verbose Log errors and verbose informational messages

debug Log errors and verbose informational messages and debugging messages

debug2 Log errors and verbose informational messages and more debugging messages

debug3 Log errors and verbose informational messages and even more debugging messages

debug4 Log errors and verbose informational messages and even more debugging messages

debug5 Log errors and verbose informational messages and even more debugging messages

NOTE: By default, Slurm's systemd service files start daemons in the foreground with the -D
option. This means that systemd will capture stdout/stderr output and print that to syslog,
independent of Slurm printing to syslog directly. To prevent systemd from doing this, add
"StandardOutput=null" and "StandardError=null" to the respective service files or override files.

DefaultQOS
When adding a new cluster this will be used as the qos for the cluster unless something is
explicitly set by the admin with the create.

LogFile
Fully qualified pathname of a file into which the Slurm Database Daemon's logs are written. The
default value is none (performs logging via syslog).
See the section LOGGING in the slurm.conf man page if a pathname is specified.

LogTimeFormat
Format of the timestamp in slurmdbd log files. Accepted format values include "iso8601",
"iso8601_ms", "rfc5424", "rfc5424_ms", "rfc3339", "clock", "short" and "thread_id". The values
ending in "_ms" differ from the ones without in that fractional seconds with millisecond precision
are printed. The default value is "iso8601_ms". The "rfc5424" formats are the same as the
"iso8601" formats except that the timezone value is also shown. The "clock" format shows a
timestamp in microseconds retrieved with the C standard clock() function. The "short" format is a
short date and time format. The "thread_id" format shows the timestamp in the C standard ctime()
function form without the year but including the microseconds, the daemon's process ID and the
current thread name and ID. A special option "format_stderr" can be added to the format as a
comma separated value (e.g. "LogTimeFormat=iso8601_ms,format_stderr"). It will change the default
format of the logs on stderr stream by prepending the timestamp as specified by LogTimeFormat.

MaxQueryTimeRange
Return an error if a query is against too large of a time span, to prevent ill-formed queries from
causing performance problems within SlurmDBD. Default value is INFINITE which allows any queries
to proceed. Accepted time formats are the same as the MaxTime option in slurm.conf. Operator and
higher privileged users are exempt from this restriction. Note that queries which attempt to
return over 3GB of data will still fail to complete with ESLURM_RESULT_TOO_LARGE.

MessageTimeout
Time permitted for a round-trip communication to complete in seconds. Default value is 10 seconds.

Parameters
Contains arbitrary comma separated parameters used to alter the behavior of the slurmdbd.

PreserveCaseUser
When defining users do not force lower case which is the default behavior.

PidFile
Fully qualified pathname of a file into which the Slurm Database Daemon may write its process ID.
This may be used for automated signal processing. The default value is "/var/run/slurmdbd.pid".

PluginDir
Identifies the places in which to look for Slurm plugins. This is a colon-separated list of
directories, like the PATH environment variable. The default value is the prefix given at
configure time + "/lib/slurm".

PrivateData
This controls what type of information is hidden from regular users. By default, all information
is visible to all users. User SlurmUser, root, and users with AdminLevel=Admin can always view
all information. Multiple values may be specified with a comma separator. Acceptable values
include:

accounts
prevents users from viewing any account definitions unless they are coordinators of them.

events prevents users from viewing event information unless they have operator status or above.

jobs prevents users from viewing job records belonging to other users unless they are
coordinators of the account running the job when using sacct.

reservations
restricts getting reservation information to users with operator status and above.

usage prevents users from viewing usage of any other user. This applies to sreport.

users prevents users from viewing information of any user other than themselves, this also makes
it so users can only see associations they deal with. Coordinators can see associations of
all users in the account they are coordinator of, but can only see themselves when listing
users.

PurgeEventAfter
Events are purged from the database after this amount of time has passed since they ended. This
includes node down times and such. The time is a numeric value and is a number of months. If you
want to purge more often you can include "hours", or "days" behind the numeric value to get those
more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The
purge takes place at the start of the each purge interval. For example, if the purge time is 2
months, the purge would happen at the beginning of each month. If not set (default), then event
records are never purged.

PurgeJobAfter
Individual job records are purged from the database after this amount of time has passed since
they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a numeric
value and is a number of months. If you want to purge more often you can include "hours", or
"days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would
purge everything older than 12 hours). The purge takes place at the start of the each purge
interval. For example, if the purge time is 2 months, the purge would happen at the beginning of
each month. If not set (default), then job records are never purged.

PurgeResvAfter
Individual reservation records are purged from the database after this amount of time has passed
since they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a
numeric value and is a number of months. If you want to purge more often you can include "hours",
or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours"
would purge everything older than 12 hours). The purge takes place at the start of the each purge
interval. For example, if the purge time is 2 months, the purge would happen at the beginning of
each month. If not set (default), then reservation records are never purged.

PurgeStepAfter
Individual job step records are purged from the database after this amount of time has passed
since they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a
numeric value and is a number of months. If you want to purge more often you can include "hours",
or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours"
would purge everything older than 12 hours). The purge takes place at the start of the each purge
interval. For example, if the purge time is 2 months, the purge would happen at the beginning of
each month. If not set (default), then job step records are never purged.

PurgeSuspendAfter
Individual job suspend records are purged from the database after this amount of time has passed
since they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a
numeric value and is a number of months. If you want to purge more often you can include "hours",
or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours"
would purge everything older than 12 hours). The purge takes place at the start of the each purge
interval. For example, if the purge time is 2 months, the purge would happen at the beginning of
each month. If not set (default), then suspend records are never purged.

PurgeTXNAfter
Individual transaction records are purged from the database after this amount of time has passed
since they occurred. The time is a numeric value and is a number of months. If you want to purge
more often you can include "hours", or "days" behind the numeric value to get those more frequent
purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes
place at the start of the each purge interval. For example, if the purge time is 2 months, the
purge would happen at the beginning of each month. If not set (default), then transaction records
are never purged.

PurgeUsageAfter
Usage records (Cluster, Association and WCKey) are purged from the database after this amount of
time has passed since they were created or last modified. The time is a numeric value and is a
number of months. If you want to purge more often you can include "hours", or "days" behind the
numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything
older than 12 hours). The purge takes place at the start of the each purge interval. For
example, if the purge time is 2 months, the purge would happen at the beginning of each month. If
not set (default), then usage records are never purged.

SlurmUser
The name of the user that the slurmdbd daemon executes as. This user should match the SlurmUser
used for all instances of slurmctld that report to slurmdbd. It must exist on the machine
executing the Slurm Database Daemon and have the same UID as the hosts on which slurmctld
executes. For security purposes, a user other than "root" is recommended. The default value is
"root".

NOTE: If the SlurmUser for slurmctld is root you can still use a non-root SlurmUser for slurmdbd
(in any other case, both SlurmUsers should match) by explicitly setting the user's AdminLevel to
Admin. After adding a user in this way, you must restart slurmctld.

StorageHost
Define the name of the host the database is running where we are going to store the data. Ideally
this should be the host on which slurmdbd executes.

StorageBackupHost
Define the name of the backup host the database is running where we are going to store the data.
This can be viewed as a backup solution when the StorageHost is not responding. It is up to the
backup solution to enforce the coherency of the accounting information between the two hosts. With
clustered database solutions (active/passive HA), you would not need to use this feature. Default
is none.

StorageLoc
Specify the name of the database as the location where accounting records are written. Defaults to
"slurm_acct_db".

StorageParameters
Comma separated list of key-value pair parameters. Currently supported values include options to
establish a secure connection to the database:

SSL_CERT
The path name of the client public key certificate file.

SSL_CA
The path name of the Certificate Authority (CA) certificate file.

SSL_CAPATH
The path name of the directory that contains trusted SSL CA certificate files.

SSL_KEY
The path name of the client private key file.

SSL_CIPHER
The list of permissible ciphers for SSL encryption.

StoragePass
Define the password used to gain access to the database to store the job accounting data. The '#'
character is not permitted in a password.

StoragePort
The port number that the Slurm Database Daemon (slurmdbd) communicates with the database. Default
is 3306.

StorageType
Define the accounting storage mechanism type. Acceptable values at present include
"accounting_storage/mysql". The value "accounting_storage/mysql" indicates that accounting
records should be written to a MySQL or MariaDB database specified by the StorageLoc parameter.
This value must be specified.

StorageUser
Define the name of the user we are going to connect to the database with to store the job
accounting data.

TCPTimeout
Time permitted for TCP connection to be established. Default value is 2 seconds.

TrackSlurmctldDown
Boolean yes or no. If set the slurmdbd will mark all idle resources on the cluster as down when a
slurmctld disconnects or is no longer reachable. The default is no.

TrackWCKey
Boolean yes or no. Used to set display and track of the Workload Characterization Key. Must be
set to track wckey usage. This must be set to generate rolled up usage tables from WCKeys. NOTE:
If TrackWCKey is set here and not in your various slurm.conf files all jobs will be attributed to
their default WCKey.

EXAMPLE

       #
       # Sample /etc/slurmdbd.conf
       #
       ArchiveEvents=yes
       ArchiveJobs=yes
       ArchiveResvs=yes
       ArchiveSteps=no
       ArchiveSuspend=no
       ArchiveTXN=no
       ArchiveUsage=no
       #ArchiveScript=/usr/sbin/slurm.dbd.archive
       AuthInfo=/var/run/munge/munge.socket.2
       AuthType=auth/munge
       DbdHost=db_host
       DebugLevel=info
       PurgeEventAfter=1month
       PurgeJobAfter=12month
       PurgeResvAfter=1month
       PurgeStepAfter=1month
       PurgeSuspendAfter=1month
       PurgeTXNAfter=12month
       PurgeUsageAfter=24month
       LogFile=/var/log/slurmdbd.log
       PidFile=/var/run/slurmdbd.pid
       SlurmUser=slurm_mgr
       StoragePass=password_to_database
       StorageType=accounting_storage/mysql
       StorageUser=database_mgr

COPYING

       Copyright (C) 2008-2010 Lawrence Livermore National Security.  Produced at  Lawrence  Livermore  National
       Laboratory (cf, DISCLAIMER).
       Copyright (C) 2010-2022 SchedMD LLC.

       This    file    is    part    of    Slurm,   a   resource   management   program.    For   details,   see
       <https://slurm.schedmd.com/>.

       Slurm is free software; you can redistribute it and/or modify it under  the  terms  of  the  GNU  General
       Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
       option) any later version.

       Slurm  is  distributed  in  the  hope  that it will be useful, but WITHOUT ANY WARRANTY; without even the
       implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.   See  the  GNU  General  Public
       License for more details.

FILES

       /etc/slurmdbd.conf

NAME

DESCRIPTION

EXAMPLE

COPYING

FILES

SEE ALSO