Provided by: opa-fastfabric_10.10.3.0.11-1ubuntu3_amd64 
NAME
opapaquery
(All) Performs various queries of the performance management (PM)/performance administration (PA) agent
and provides details about fabric performance. Refer to the Intel(R) Omni-Path Fabric Suite Fabric
Manager User Guide
for a description of the operation and client services of the PM/PA.
By default, opapaquery queries the most recent data. However, if an image number (imgNum) and/or image
offset (imgOff) is provided, the query returns previous sweep data. Queries that access previous sweep
data return with the absolute image number representing that data, and therefore have an image offset of
zero.
opapaquery's operation is dependent on an Intel(R) Omni-Path Fabric Suite Fabric Manager version 6.0 or
greater running as master SM/PM in the fabric.
By default, opapaquery uses the first active port on the local system. However, if the Fabric Management
Node is connected to more than one fabric (for example, a subnet), the HFI and port may be specified to
select the fabric whose PA is to be queried.
Syntax
opapaquery [-v] [-h hfi|-b addr] [-p port] [-x gid] [-E]
[-T ssl_params] [-o type] [-g groupName] [-l nodeLid] [-P portNumber]
[--timeout] [-G nodeGuid] [-D nodeDesc] [-d delta] [-j date_time]
[-q date_time] [-U] [-s select] [-f focus] [-S start] [-r range]
[-n imgNum] [-O imgOff] [-y imgTime] [-m moveImgNum] [-M moveImgOff] [-V vfName]
Options
-v/--verbose
Specifies the verbose output.
-h/--hfi hfi
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port
number. Default is 0.
-b/--oob address
Specifies Out-of-Band address of node running the FE. Can be either hostname, IPv4, or IPv6
address. Default is "127.0.0.1".
-p/--port port
Specifies the port.
• In-band: Numbered 1...n. Using 0 specifies the first active port. Default is 0.
• Out-of-band: Port FE is listening on. Default is 3245.
-x/--source-gid src_gid
Specifies the source GID of the local GID. (This is required for most Path and Trace Record
Queries when Out-of-Band.)
-E/--feEsm
Specifies the ESM FE.
-T/--ssl-params file
Specifies the SSL/TLS parameters XML file. Default is /etc/opa/opamgt_tls.xml.
-o/--output type
Specifies the output type. Default is groupList. See Output Types
-g/--groupName groupName
Specifies the group name for groupInfo query.
-l/--lid lid
Specifies the LID of the node.
-P/--portNumber portNumber
Specifies the port number within the node.
--timeout
Specifies the timeout (response wait time) in ms. Default is 1000 ms.
-G/--nodeGuid
Specifies the GUID of the node.
-D/--nodeDesc
Specifies the description of the node.
-d/--delta delta
Specifies the delta flag for portCounters query - 0 or 1.
-j/--begin date_time
Obtains portCounters over an interval beginning at date_time. date_time may be a time entered
as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for
example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.
-q/--end date_time
Obtains portCounters over an interval ending at date_time. date_time may be a time entered as
HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example,
"2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.
-U/--userCntrs
Queries by user-controlled counters flag for portCounters.
-s/--select select
Specifies the 32-bit select flag for clearing port counters.
Select bits for clrPortCounters. 0 is the least significant bit (rightmost). The
clrPortCounters bit descriptions are listed in the order "mask - bit - location" below:
• 0x80000000 - 31 - Transmit Data (XmitData)
• 0x40000000 - 30 - Receive Data (RcvData)
• 0x20000000 - 29 - Transmit Packets (XmitPkts)
• 0x10000000 - 28 - Receive Packets (RcvPkts)
• 0x08000000 - 27 - Multicast Transmit Packets (MulticastXmitPkts)
• 0x04000000 - 26 - Multicast Receive Packets (MulticastRcvPkts)
• 0x02000000 - 25 - Transmit Wait (XmitWait)
• 0x01000000 - 24 - Congestion Discards (CongDiscards)
• 0x00800000 - 23 - Receive FECN (RcvFECN)
• 0x00400000 - 22 - Receive BECN (RcvBECN)
• 0x00200000 - 21 - Transmit Time Congestion (XmitTimeCong)
• 0x00100000 - 20 - Transmit Time Wasted BW (XmitWastedBW)
• 0x00080000 - 19 - Transmit Time Wait Data (XmitWaitData)
• 0x00040000 - 18 - Receive Bubble (RcvBubble)
• 0x00020000 - 17 - Mark FECN (MarkFECN)
• 0x00010000 - 16 - Receive Constraint Errors (RcvConstraintErrors)
• 0x00008000 - 15 - Receive Switch Relay (RcvSwitchRelayErrors)
• 0x00004000 - 14 - Transmit Discards (XmitDiscards)
• 0x00002000 - 13 - Transmit Constraint Errors (XmitConstraintErrors)
• 0x00001000 - 12 - Receive Remote Physical Errors (RcvRemotePhysicalErrors)
• 0x00000800 - 11 - Local Link Integrity (LocalLinkIntegrityErrors)
• 0x00000400 - 10 - Receive Errors (RcvErrors)
• 0x00000200 - 9 - Excessive Buffer Overrun (ExcessiveBufferOverruns)
• 0x00000100 - 8 - FM Configuration Errors (FMConfigErrors)
• 0x00000080 - 7 - Link Error Recovery (LinkErrorRecovery)
• 0x00000040 - 6 - Link Error Downed (LinkDowned)
• 0x00000020 - 5 - Uncorrectable Errors (UncorrectableErrors)
Select bits for clrVfPortCounters. 0 is the least significant bit (rightmost). The
clrVfPortCounters bit descriptions are listed in the order "mask - bit - location" below:
• 0x80000000 - 31 - VL Transmit Data (VLXmitData)
• 0x40000000 - 30 - VL Receive Data (VLRcvData)
• 0x20000000 - 29 - VL Transmit Packets (VLXmitPkts)
• 0x10000000 - 28 - VL Receive Packets (VLRcvPkts)
• 0x08000000 - 27 - VL Transmit Discards (VLXmitDiscards)
• 0x04000000 - 26 - VL Congestion Discards (VLCongDiscards)
• 0x02000000 - 25 - VL Transmit Wait (VLXmitWait)
• 0x01000000 - 24 - VL Receive FECN (VLRcvFECN)
• 0x00800000 - 23 - VL Receive BECN (VLRcvBECN)
• 0x00400000 - 22 - VL Transmit Time Congestion (VLXmitTimeCong)
• 0x00200000 - 21 - VL Transmit Wasted BW (VLXmitWastedBW)
• 0x00100000 - 20 - VL Transmit Wait Data (VLXmitWaitData)
• 0x00080000 - 19 - VL Receive Bubble (VLRcvBubble)
• 0x00040000 - 18 - VL Mark FECN (VLMarkFECN)
• Bits 17-0 reserved
-f/--focus focus
Specifies the focus select value for getting focus ports. focus select values are:
unexpclrport
Lists unexpectedly cleared ports - LID ordered.
norespport
Lists no response ports - LID ordered.
skippedport
Lists skipped ports - LID ordered.
utilhigh Sorted by utilization - highest first.
pktrate Sorted by packet rate - highest first.
utillow Sorted by utilization - lowest first.
integrity Sorted by integrity category - highest first.
congestion
Sorted by congestion category - highest first.
smacongestion
Sorted by SMA congestion category - highest first.
bubbles Sorted by bubble category - highest first.
security Sorted by security category - highest first.
routing Sorted by routing category - highest first.
vfutilhigh
Sorted by utilization - highest first.
vfpktrate Sorted by packet rate - highest first.
vfutillow Sorted by utilization - lowest first.
vfcongestion
Sorted by congestion category - highest first.
vfbubbles Sorted by bubble category - highest first.
-S/--start start
Specifies the start of window for focus ports, should always be 0.
-r/--range range
Specifies the size of window for focus ports list.
-Q/--tuple
Specifies a tuple that identifies a focus select value, comparator and argument in the form
select: comparator:argument. Up to 8 tuples may be specified as: -Q s1:c1:a1 -Q s2:c2:a2 ... -Q
s8:c8:a8
Valid focus select values are: utilization, pktrate, integrity, congestion, smacongestion,
bubbles, security and routing.
Valid comparator values are: GT, GE, LT, LE
Valid arguments are: Any 64-bit value in hexadecimal or decimal.
When specifying more than one tuple, a logical operator -Z/--operator must also be specified.
-Z/--operator
Specifies a logical operator used to join the results of the specified tuples.
and - Specifies a port is returned if it meets all of the tuple filter criteria.
or - Specifies a port is returned if it meets one or more of the tuple filter criteria.
-n/--imgNum imgNum
Specifies the 64-bit image number.
-O/--imgOff imgOff
Specifies the image offset.
-y/--imgTime
Specifies the image time. May be used with imageinfo, groupInfo, groupInfo, groupConfig,
freezeImage, focusPorts, vfInfo, vfConfig, and vfFocusPorts. Will return closest image within
image interval if possible. See --begin/--end above for format.
-m/--moveImgNum moveImgNum
Specifies the 64-bit image number. Used with moveFreeze to move a freeze image.
-M/--moveImgOff moveImgOff
Specifies the image offset. Can be used with moveFreeze to move a freeze image.
-V/--vfName vfName
Specifies the VF name for vfInfo query.
-h and -p options permit a variety of selections:
-h 0
First active port in system (Default).
-h 0 -p 0
First active port in system.
-h x
First active port on HFI x.
-h x -p 0
First active port on HFI x.
-h 0 -p y
Port y within system (no matter which ports are active).
-h x -p y
HFI x, port y.
Output Types
classPortInfo
Specifies the class port info.
groupList
Specifies the list of PA groups.
groupInfo
Specifies the summary statistics of a PA group. Requires -g option for groupName.
groupConfig
Specifies the configuration of a PA group. Requires -g option for groupName.
groupNodeInfo
Specifies the node information of a PA group. Requires -g option for groupName. Options -l lid,
-G nodeGuid and -D nodeDesc are optional.
groupLinkInfo
Specifies the link Information of a PA group. Requires -g option for groupName. Options -l lid
and -P port are optional. Note that -P 255 specifies all ports. Option -P port without -l lid
is ignored.
portCounters
Specifies the port counters of fabric port. Requires -l lid and -P port options. -d delta is
optional.
clrPortCounters
Clears port counters of fabric port. Requires -l lid and -P port, and -s select options.
clrAllPortCounters
Clears all port counters in fabric.
pmConfig
Retrieves PM configuration information.
freezeImage
Creates freeze frame for image ID. Requires -n imgNum.
releaseImage
Releases freeze frame for image ID. Requires -n imgNum.
renewImage
Renews lease for freeze frame for image ID. Requires -n imgNum.
moveFreeze
Moves freeze frame from image ID to new image ID. Requires -n imgNum and -m moveImgNum.
focusPorts
Gets sorted list of ports using utilization or error values (from group buckets). Requires -g
groupname, -f focus, -S start, -r range.
imageInfo
Gets configuration of a PA image (timestamps, etc.). Requires -n imgNum.
vfList
Specifies the list of virtual fabrics.
vfInfo
Specifies the summary statistics of a virtual fabric. Requires -V option for vfName.
vfConfig
Specifies the configuration of a virtual fabric. Requires -V option for vfName.
vfPortCounters
Specifies the port counters of fabric port. Requires -V vfName, -l lid and -P port options, -d
delta is optional.
vfFocusPorts
Gets sorted list of virtual fabric ports using utilization or error values (from VF buckets).
Requires -V vfname, -f focus, -S start, -r range.
clrVfPortCounters
Clears VF port counters of fabric port. Requires -l lid, -P port, -s select, and -V vfname
options.
Examples
opapaquery -o classPortInfo
opapaquery -o groupList
opapaquery -o groupInfo -g All
opapaquery -o groupConfig -g All
opapaquery -o groupNodeInfo -g All -G <nodeGuid>
opapaquery -o groupNodeInfo -g All -D <nodeDesc>
opapaquery -o groupNodeInfo -g All -l 1
opapaquery -o groupNodeInfo -g All -l 1 -G <nodeGuid>
opapaquery -o groupLinkInfo -g All
opapaquery -o groupLinkInfo -g All -l 1 -P 1
opapaquery -o groupLinkInfo -g All -l 1 -P 255
opapaquery -o portCounters -l 1 -P 1 -d 1
opapaquery -o portCounters -l 1 -P 1 -d 1 -n 0x20000000d02 -O 1
opapaquery -o portCounters -l 1 -P 1 -d 1 -j 13:30 -q 14:20
opapaquery -o clrPortCounters -l 1 -P 1 -s 0xC0000000
(clears XmitData & RcvData)
opapaquery -o clrAllPortCounters -s 0xC0000000
(clears XmitData & RcvData on all ports)
opapaquery -o pmConfig
opapaquery -o freezeImage -n 0x20000000d02
opapaquery -o releaseImage -n 0xd01
opapaquery -o renewImage -n 0xd01
opapaquery -o moveFreeze -n 0xd01 -m 0x20000000d02 -M -2
opapaquery -o focusPorts -g All -f integrity -S 0 -r 20
opapaquery -o focusPorts -g All -S 0 -r 20 -Z AND -Q integrity:ge:20 -Q bubbles:lt:10
opapaquery -o focusPorts -g All -f skippedport -S 0 -r 20
opapaquery -o imageInfo -n 0x20000000d02
opapaquery -o imageInfo -y "1 hour ago"
opapaquery -o vfList
opapaquery -o vfInfo -V Default
opapaquery -o vfConfig -V Default
opapaquery -o vfPortCounters -l 1 -P 1 -d 1 -V Default
opapaquery -o clrVfPortCounters -l 1 -P 1 -s 0xC0000000 -V Default
(clears VLXmitData & VLRcvData)
opapaquery -o vfFocusPorts -V Default -f integrity -S 0 -r 20
Copyright(C) 2015-2019 Intel Corporation opapaquery(8)