NAME

       opaallanalysis

       (All)  opaallanalysis  command  performs  the  set  of  analysis  specified in FF_ALL_ANALYSIS and can be
       specified for fabric, chassis, esm, or hostsm.

Syntax

       opaallanalysis [-b|-e] [-s] [-d  dir] [-c  file] [-t  portsfile]
       [-p  ports] [-F chassisfile] [-H 'chassis'] [-G  esmchassisfile]
       [-E  esmchassis] [-T  topology_input]

Options

       --help

                 Produces full help text.

       -b

                 Sets the baseline mode. Default is compare/check mode.

       -e

                 Evaluates health only. Default is compare/check mode.

       -s

                 Saves history of failures (errors/differences).

       -d dir

                 Identifies the top-level directory for saving baseline and history of failed checks. Default is
                 /var/usr/lib/opa/analysis

       -c file

                 Specifies the error thresholds configuration file. Default is /etc/opa/opamon.conf

       -t portsfile

                 Specifies the file with list of local HFI ports used to access fabric(s) for analysis.  Default
                 is /etc/opa/ports

       -p ports

                 Specifies  the  list  of  local HFI ports used to access fabric(s) for analysis. Default is the
                 first active port. Specified as HFI:port as follows:

                 0:0       First active port in system.

                 0:y       Port y within system.

                 x:0       First active port on HFI x.

                 x:y       HFI x, port y.

       -F chassisfile

                 Specifies the file with a chassis in a cluster. Default is /etc/opa/chassis

       -H 'chassis'

                 Specifies the list of chassis on which to execute the command.

       -G esmchassisfile

                 Specifies the file with embedded SM chassis in the cluster. Default is /etc/opa/esm_chassis

       -E esmchassis

                 Specifies the list of embedded SM chassis to analyze.

       -T topology_input

                 Specifies the name of topology input file to use. Any %P markers in this filename are  replaced
                 with  the  HFI:port being operated on, such as 0:0 or 1:2. Default is /etc/opa/topology.%P.xml.
                 If -T NONE is specified, no topology input file is used. See opareport for more information.

Example

       opaallanalysis

       opaallanalysis -p '1:1 2:1'

Environment Variables

       The following environment variables are also used by this command:

       PORTS

                 List of ports, used in absence of -t and -p.

       PORTS_FILE

                 File containing list of ports, used in absence of -t and -p.

       FF_TOPOLOGY_FILE

                 File containing topology_input (may have %P marker in filename), used in absence of -T.

       CHASSIS

                 List of chassis, used if -F and -H options are not supplied.

       CHASSIS_FILE

                 File containing list of chassis, used if -F and -H options are not supplied.

       ESM_CHASSIS

                 List of SM chassis, used if -G and -E options are not supplied.

       ESM_CHASSIS_FILE

                 File containing list of SM chassis, used if -G and -E options are not supplied.

       FF_ANALYSIS_DIR

                 Top level directory for baselines and failed health checks.

       FF_CHASSIS_CMDS

                 List of commands to issue during analysis, unused if -e option supplied.

       FF_CHASSIS_HEALTH

                 Single command to issue to check overall health during analysis, unused if -b option supplied

Details

       The opaallanalysis command performs the set of analysis specified in FF_ALL_ANALYSIS,  which  must  be  a
       space-separated  list.  This can be provided by the environment or using /etc/opa/opafastfabric.conf. The
       analysis set includes the options: fabric, chassis, esm, or hostsm. For a  fabric  with  only  externally
       managed switches, FF_ALL_ANALYSIS should be set to -fabric in opafastfabric.conf.

       Note  that  the  opaallanalysis  command  has  options which are a super-set of the options for all other
       analysis commands. The options are passed along to the respective tools as needed. For  example,  the  -c
       file option is passed on to opafabricanalysis if it is specified in FF_ALL_ANALYSIS.

       The  output  files  are  all  the  output files for the FF_ALL_ANALYSIS selected set of analysis. See the
       previous sections for the specific output files.

Copyright(C) 2015-2019                          Intel Corporation                              opaallanalysis(8)