Ubuntu Manpage: nvram-wakeup - a (small) program that can read and write the WakeUp time in the BIOS.

NAME

       nvram-wakeup - a (small) program that can read and write the WakeUp time in the BIOS.

SYNOPSIS

       nvram-wakeup  [-l|--syslog]  [-D|--debug]  [-A|--directisa]  [-N|--nowrite]  [-d|--disable] [-s|--settime
       time] [-C|--configfile filename] [-I|--iwname string] [-v|--version] [-h|--help]

DESCRIPTION

       nvram-wakeup is a (small) program that can read and write the WakeUp time in the BIOS (via /dev/nvram  on
       kernels >= 2.4.6 or using direct I/O).  On this WakeUp time the computer will be powered on automatically
       from the soft-off state.

OPTIONS

If run without options, nvram-wakeup will read the current wakeup settings from the NVRAM and print them
on stdout.

-l, --syslog
This option will let nvram-wakeup log all output via syslogd to the system log instead of
stdout/stderr. This option should always be the first one.

-D, --debug
This option enables printing debug messages.

-A, --directisa
Use direct I/O port access to access the nvram instead of /dev/nvram. This option must be used if
the configuration option upper_method is set. The device /dev/rtc is still used.

WARNING: If you use the option --directisa and some other programm tries to access nvram and/or
rtc at the same time, you might screw up all your nvram (i.e. all CMOS settings).

-N, --nowrite
This option disables writing into the nvram and rtc devices. But all the values for the bytes are
calculated. Write them down and go set the same date/time via BIOS Setup, run nvram-wakeup and see
if the values you written down correspond to the values set by the BIOS.

-s time, --settime=time
Specify the time on which the computer should be up and running. The time is specified as a time_t
value, i.e., number of seconds since epoch (Jan 1 1970, 00:00:00).

See EXAMPLES below on how to set a "human readable" wakeup time.

Set time to 0 to disable the wakeup feature.

You can specify multiple -s|--settime options on the command line, as far as they all have the
same time value. See EXAMPLES below.

-d, --disable
A synonym for --settime=0

-C filename, --configfile=filename
Read mainboard configuration from configuration file filename.

See nvram-wakeup.conf(5) for information on the syntax of the file.

See BOARD CONFIGURATION below for general information on getting board configurations.

-I name, --iwname=name
If the DMI entries of your mainboard are broken, you may specify a DMI infowriter name here. (it's
the name of one of the functions from nvram-wakeup-mb.c)

If you specify --configfile as well as the --iwname option, then --iwname is ignored.

See BOARD CONFIGURATION below for general information on getting board configurations.

-w minutes, --wakeupbefore=minutes
Specify how many minutes before the programmed wakeuptime the computer should wake up.

The default is to start 5 minutes before the programmed wakeup time.

-h, --help
Print a help message and exit.

-v, --version
Display version and author information.

BOARD CONFIGURATION

       By default, the mainboard is autodetected by reading DMI information from the BIOS.  If the  DMI  entries
       are  broken,  you  can  specify the name of the infowriter to be used with the --iwname option. This only
       works if the board configuration is aleready compiled into the program.  The list of existing infowriters
       can be found in the source.

       Example: On my Biostar M6VCG the whole DMI entry is broken (maybe a BIOS update would help, but  I  never
       tried it), but the configuration of the board is known, so only the autodetection doesn't work. Thus look
       up (in boards.yaml) the name of the infowriter to beused, which is 'bio_m6vcg' and call

              nvram-wakeup --iwname bio_m6vcg

       If  nvram-wakeup  doesn't know anything about your board, you can put the board configuration into a file
       and pass the file name via the --configfile option to nvram-wakeup.  Look nvram-wakeup.conf(5)  for  more
       information on the configuration file syntax.

       If you specify --configfile as well as the --iwname option, then --iwname is ignored.

EXAMPLES

       You can specify multiple -d or -s options at the command line,  but they must specify the same time, e.g.

              nvram-wakeup --settime=0 -s0 -s 0 -d -ddds0  # is O.K.
              nvram-wakeup -s1002722247 -s1002722247       # is O.K.
              nvram-wakeup -s1002722247 -s1002722248       # is not O.K.
              nvram-wakeup -s1002722247 --disable          # is not O.K.

       If you want the machine to be up and running in 20 minutes, call

              nvram-wakeup -s $((`date +%s` + 20 * 60))

       If you want the machine to be up and running at 18:30 today, call

              nvram-wakeup -s `date +%s -d "18:30"`

       Note that this is really "today" so if you run this after 18:30, the time will be in the past.

       If  you  want the machine to be up and running on a particular day, at a particular time, say at 18:30 on
       Apr. 23rd, call

              nvram-wakeup -s `date +%s -d "Apr 23 18:30"`

       For "tomorrow" you can use something like that:

              nvram-wakeup -s $((`date +%s -d "18:30"` + 60*60*24))

EXIT STATUS

       0      Successful program execution. The new date and time were set successfully.

       1      Successful program execution. The computer must be rebooted for the changes to take effect.

       2      An error occured. Something went wrong.

FILES

       /dev/nvram
              NVRAM character device. This one is used for reading/writing the nvram values if the command  line
              option --directisa is not used.

       /dev/rtc
              RTC  character  device.  This  one  is  used to determine if the RTC clock is running localtime or
              UTC/GMT. Furthermore, some motherboards use the RTC alarm time for the wakeup feature.

       /dev/mem
              Memory character device. This one is used to get DMI information for board autodetection.

       nvram-wakeup.conf
              Configuration file for a mainboard not  supported  out-of-the-box.  See  nvram-wakeup.conf(5)  for
              information on the syntax of the file.

HOMEPAGE

       http://sf.net/projects/nvram-wakeup/

AUTHOR

       Written by Sergei Haller <Sergei.Haller@math.uni-giessen.de>.

REPORTING BUGS

       Report   bugs  at  the  bug  tracking  system  (see  HOMEPAGE)  or  on  the  mailing  list  nvram-wakeup-
       devel@lists.sourceforge.net

COPYRIGHT

       Copyright © 2001-2004 Sergei Haller.

       This program is free software; you can redistribute it and/or modify  it  under  the  terms  of  the  GNU
       General  Public License as published by the Free Software Foundation; either version 2 of the License, or
       (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY  WARRANTY;  without  even
       the  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
       License for more details.

       You should have received a copy of the GNU General Public License along with this program; if not,  write
       to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

Linux                                              May 08 2004                                   nvram-wakeup(8)