NAME

       pfsoutyuv - Write frames to .yuv file used by many video codecs

SYNOPSIS

       pfsoutyuv  [--verbose]  [--quiet]  [--bitdepth]  [--colorspace]  [--downsample-filter]  [--chroma-format]
       <file> [<file>...]

DESCRIPTION

       Use this command to write the pfsstream to an uncompressed .yuv file.

       If the output color space is LDR (bt709), the input pfs stream should be  in  the  gamma  corrected  sRGB
       color  space.  If  the  output  color space is HDR (pq2020 or hgl2020), the input pfs stream should be in
       linear RGB color space.

OPTIONS

       --bitdepth, -b
              bit-depth of the integer values stored in the yuv file. a single color component is  stored  as  a
              byte if bit-depth is 8, or as two bytes otherwise. default: 10 [bits]

       --colorspace, -c
              Currently it can be either:

              pq2020 for HDR images with BT.2020 colorspace and PQ transfer function, or

              hlg2020 for HDR images with BT.2020 colorspace and HLG transfer function, or

              bt709 for LDR images in BT.709 (rec.709) colorspace without any transfer function.

       If  no  option  is  specified,  colorspace is inferred from the LUMINANCE tag in the pfsstream: pq2020 if
       LUMINANCE is ABSOLUTE or RELATIVE, bt709 if LUMINANCE is DISPLAY.

       --chroma-format, -f
              The sampling format for the chroma channels. Can be one of:

              444 The standard 4:4:4 format with no chroma downsampling.

              420 The 4:2:0 format with both colour channels being downsampled by half.

              default: 420

       --downsample-filter, -f
              The filter weights used when downsampling to 4:2:0. Can be either

              f0 Weighting = [1/8, 3/4, 1/8]

              f1 Weighting = [1/4, 1/2, 1/4]

              default: f0

       --srgb-input -s
              Set if the input is gamma corrected, though this will be inferred otherwise from the LUMINANCE tag
              in the pfs stream

       --linear-input -l
              As above, set if the input contains linear luminance values

       --verbose, -v
              Print extra information to stderr.

       --quiet, -q
              Disable warning message about the change in handling absolute values in RGBE files. See  IMPORTANT
              NOTE below.

EXAMPLES

        pfsin frame%04d.exr | pfsoutyuv video%s.yuv
              Converts a sequence of frames frame0000.exr, frame0001.exr, ... to a yuv file.

SEE ALSO

       pfsin(1)

IMPORTANT NOTE

BUGS

       Please     report     bugs    and    comments    on    implementation    to    the    discussion    group
       http://groups.google.com/group/pfstools

                                                                                                    pfsoutyuv(1)