Ubuntu Manpage: nsd.conf - NSD configuration file

NAME

       nsd.conf - NSD configuration file

SYNOPSIS

       nsd.conf

DESCRIPTION

       This file is used to configure nsd(8). It specifies options for the nsd server, zone files, primaries and
       secondaries.

       The file format has attributes and values. Some attributes have attributes inside them. The notation is:

       attribute: value

       Comments  start  with  #  and  last  to the end of line. Empty lines are ignored, as is whitespace at the
       beginning of a line. Quotes must be used for values with spaces in them, eg. "file name.zone".

EXAMPLE

       An example of a short nsd.conf file is below.

       # Example nsd.conf file for example.com.
       # This is a comment.

       server:
            server-count: 1 # use this number of cpu cores
            username: nsd
            zonelistfile: /var/lib/nsd/zone.list
            logfile: /var/log/nsd.log
            pidfile: /run/nsd/nsd.pid
            xfrdfile: /var/lib/nsd/xfrd.state

       zone:
            name: example.com
            zonefile: /etc/nsd/example.com.zone

       zone:
            # this server is the primary and 192.0.2.1 is the secondary.
            name: primaryzone.com
            zonefile: /etc/nsd/primaryzone.com.zone
            notify: 192.0.2.1 NOKEY
            provide-xfr: 192.0.2.1 NOKEY

       zone:
            # this server is the secondary and 192.0.2.2 is the primary.
            name: secondaryzone.com
            zonefile: /etc/nsd/secondaryzone.com.zone
            allow-notify: 192.0.2.2 NOKEY
            request-xfr: 192.0.2.2 NOKEY

       Then, use kill -HUP to reload changes from primary zone files.  And use kill -TERM to stop the server.

FILE FORMAT

There must be whitespace between keywords. Attribute keywords end with a colon ':'. An attribute is
followed by its containing attributes, or a value.

At the top level, only server:, verify:, key:, pattern:, zone:, tls-auth:, and remote-control: are
allowed. These are followed by their attributes or a new top-level keyword. The zone: attribute is
followed by zone options. The server: attribute is followed by global options for the NSD server. The
verify: attribute is used to control zone verification. A key: attribute is used to define keys for
authentication. The pattern: attribute is followed by the zone options for zones that use the pattern. A
tls-auth: attribute is used to define authentication attributes for TLS connections used for XFR-over-
TLS.

Files can be included using the include: directive. It can appear anywhere, and takes a single filename
as an argument. Processing continues as if the text from the included file were copied into the config
file at that point. If a chroot is used, an absolute filename is needed (with the chroot prepended), so
that the include can be parsed before and after application of the chroot (and the knowledge of what that
chroot is). You can use '*' to include a wildcard match of files, eg. "foo/nsd.d/*.conf". Also '?',
'{}', '[]', and '~' work, see glob(7). If no files match the pattern, this is not an error.

Server Options
The global options (if not overridden from the NSD command-line) are taken from the server: clause. There
may only be one server: clause.

ip-address: <ip4 or ip6>[@port] [servers] [bindtodevice] [setfib]
NSD will bind to the listed ip-address. Can be given multiple times to bind multiple ip-addresses.
Optionally, a port number can be given. If none are given NSD listens to the wildcard interface.
Same as command-line option -a.

To limit which NSD server(s) listen on the given interface, specify one or more servers separated
by whitespace after <ip>[@port]. Ranges can be used as a shorthand to specify multiple consecutive
servers. By default every server will listen.

If an interface name is used instead of ip4 or ip6, the list of IP addresses associated with that
interface is picked up and used at server start.

For servers with multiple IP addresses that can be used to send traffic to the internet, list them
one by one, or the source address of replies could be wrong. This is because if the udp socket
associates a source address of 0.0.0.0 then the kernel picks an ip-address with which to send to
the internet, and it picks the wrong one. Typically needed for anycast instances. Use ip-
transparent to be able to list addresses that turn on later (typical for certain load-balancing).

interface: <ip4 or ip6>[@port] [servers] [bindtodevice] [setfib]
Same as ip-address (for ease of compatibility with unbound.conf).

ip-transparent: <yes or no>
Allows NSD to bind to non local addresses. This is useful to have NSD listen to IP addresses that
are not (yet) added to the network interface, so that it can answer immediately when the address
is added. Default is no.

ip-freebind: <yes or no>
Set the IP_FREEBIND option to bind to nonlocal addresses and interfaces that are down. Similar to
ip-transparent. Default is no.

reuseport: <yes or no>
Use the SO_REUSEPORT socket option, and create file descriptors for every server in the
server-count. This improves performance of the network stack. Only really useful if you also
configure a server-count higher than 1 (such as, equal to the number of cpus). The default is no.
It works on Linux, but does not work on FreeBSD, and likely does not work on other systems.

send-buffer-size: <number>
Set the send buffer size for query-servicing sockets. Set to 0 to use the default settings.

receive-buffer-size: <number>
Set the receive buffer size for query-servicing sockets. Set to 0 to use the default settings.

debug-mode: <yes or no>
Turns on debugging mode for nsd, does not fork a daemon process. Default is no. Same as command-
line option -d. If set to yes it does not fork and stays in the foreground, which can be helpful
for command-line debugging, but is also used by certain server supervisor processes to ascertain
that the server is running.

do-ip4: <yes or no>
If yes, NSD listens to IPv4 connections. Default yes.

do-ip6: <yes or no>
If yes, NSD listens to IPv6 connections. Default yes.

database: <filename>
This option is ignored by NSD versions 4.8.0 and newer, because the database feature has been
removed.

zonelistfile: <filename>
By default /var/lib/nsd/zone.list is used. The specified file is used to store the dynamically
added list of zones. The list is written to by NSD to add and delete zones. It is a text file
with a zone-name and pattern-name on each line. This file is used for the nsd-control addzone and
delzone commands.

identity: <string>
Returns the specified identity when asked for CH TXT ID.SERVER. Default is the name as returned
by gethostname(3). Same as command-line option -i. See hide-identity to set the server to not
respond to such queries.

version: <string>
Returns the specified version string when asked for CH TXT version.server, and version.bind
queries. Default is the compiled package version. See hide-version to set the server to not
respond to such queries.

nsid: <string>
Add the specified nsid to the EDNS section of the answer when queried with an NSID EDNS enabled
packet. As a sequence of hex characters or with ascii_ prefix and then an ascii string. Same as
command-line option -I.

logfile: <filename>
Log messages to the logfile. The default is to log to stderr and syslog (with facility
LOG_DAEMON). Same as command-line option -l.

log-only-syslog: <yes or no>
Log messages only to syslog. Useful with systemd so that print to stderr does not cause duplicate
log strings in journald. Before syslog has been opened, the server uses stderr. Stderr is also
used if syslog is not available. Default is no.

server-count: <number>
Start this many NSD servers. Default is 1. Same as command-line option -N.

cpu-affinity: <number> <number> ...
Overall CPU affinity for NSD server(s). Default is no affinity.

server-N-cpu-affinity: <number>
Bind NSD server specified by N to a specific core. Default is to have affinity set to every core
specified in cpu-affinity. This setting only takes effect if cpu-affinity is enabled.

xfrd-cpu-affinity: <number>
Bind xfrd to a specific core. Default is to have affinity set to every core specified in
cpu-affinity. This setting only takes effect if cpu-affinity is enabled.

tcp-count: <number>
The maximum number of concurrent, active TCP connections by each server. Default is 100. Same as
command-line option -n. That is the number of requests from clients to this server.

tcp-reject-overflow: <yes or no>
If set to yes, TCP connections made beyond the maximum set by tcp-count will be dropped
immediately (accepted and closed). Default is no.

tcp-query-count: <number>
The maximum number of queries served on a single TCP connection. Default is 0, meaning there is
no maximum.

tcp-timeout: <number>
Overrides the default TCP timeout. This also affects zone transfers over TCP. The default is 120
seconds.

tcp-mss: <number>
Maximum segment size (MSS) of TCP socket on which the server responds to queries. Value lower than
common MSS on Ethernet (1220 for example) will address path MTU problem. Note that not all
platform supports socket option to set MSS (TCP_MAXSEG). Default is system default MSS determined
by interface MTU and negotiation between server and client.

outgoing-tcp-mss: <number>
Maximum segment size (MSS) of TCP socket for outgoing XFR request to other nameservers. Value
lower than common MSS on Ethernet (1220 for example) will address path MTU problem. Note that not
all platform supports socket option to set MSS (TCP_MAXSEG). Default is system default MSS
determined by interface MTU and negotiation between NSD and other servers.

xfrd-tcp-max: <number>
Number of sockets for xfrd to use for outgoing zone transfers. Default 128. Increase it to allow
more zone transfer sockets, like to 256. That is for zone transfers requested by this server from
other servers. To save memory, this can be lowered, set it lower together with some other
settings to have reduced memory footprint for NSD. xfrd-tcp-max: 32 and xfrd-tcp-pipeline: 128 and
rrl-size: 1000

This reduces memory footprint, other memory usage is caused mainly by the server-count setting,
the number of server processes, and the tcp-count setting, which keeps buffers per server process,
and by the size of the zone data.

xfrd-tcp-pipeline: <number>
Number of simultaneous outgoing zone transfers that are possible on the tcp sockets of xfrd. Max
is 65536, default is 128. That is for zone transfers requested by this server from other servers.

ipv4-edns-size: <number>
Preferred EDNS buffer size for IPv4. Default 1232.

ipv6-edns-size: <number>
Preferred EDNS buffer size for IPv6. Default 1232.

pidfile: <filename>
Use the pid file instead of the platform specific default, usually "/run/nsd/nsd.pid". Same as
command-line option -P. With "" there is no pidfile, for some startup management setups, where a
pidfile is not useful to have. The default can be set at compile time, sometimes to "". Then the
config option and commandline option can be used to specify that a pidfile is used, different from
its compile time default value. The file is not chowned to the user from the username: option,
for permission safety reasons. It remains owned to the user by which the server was started. The
file may not be removed after the server is finished and quit, since permissions for the username
may not make this possible.

port: <number>
Answer queries on the specified port. Default is 53. Same as command-line option -p.

statistics: <number>
If not present no statistics are dumped. Statistics are produced every number seconds. Same as
command-line option -s.

chroot: <directory>
NSD will chroot on startup to the specified directory. Note that if elsewhere in the configuration
you specify an absolute pathname to a file inside the chroot, you have to prepend the chroot path.
That way, you can switch the chroot option on and off without having to modify anything else in
the configuration. Set the value to "" (the empty string) to disable the chroot. By default "" is
used. Same as command-line option -t.

username: <username>
After binding the socket, drop user privileges and assume the username. Can be username, id or
id.gid. Same as command-line option -u.

zonesdir: <directory>
Change the working directory to the specified directory before accessing zone files. Also, NSD
will access zonelistfile, logfile, pidfile, xfrdfile, xfrdir, server-key-file, server-cert-file,
control-key-file and control-cert-file relative to this directory. Set the value to "" (the empty
string) to disable the change of working directory. By default "/etc/nsd" is used.

difffile: <filename>
Ignored, for compatibility with NSD3 config files.

xfrdfile: <filename>
The soa timeout and zone transfer daemon in NSD will save its state to this file. State is read
back after a restart. The state file can be deleted without too much harm, but timestamps of zones
will be gone. If it is configured as "", the state file is not used, all secondary zones are
checked for updates upon startup. For more details see the section on zone expiry behavior of
NSD. Default is /var/lib/nsd/xfrd.state.

xfrdir: <directory>
The zone transfers are stored here before they are processed. A directory is created here that is
removed when NSD exits. Default is /tmp.

xfrd-reload-timeout: <number>
If this value is -1, xfrd will not trigger a reload after a zone transfer. If positive xfrd will
trigger a reload after a zone transfer, then it will wait for the number of seconds before it will
trigger a new reload. Setting this value throttles the reloads to once per the number of seconds.
The default is 1 second.

verbosity: <level>
This value specifies the verbosity level for (non-debug) logging. Default is 0. 1 gives more
information about incoming notifies and zone transfers. 2 lists soft warnings that are
encountered. 3 prints more information. Same as command-line option -V.

Verbosity 0 will print warnings and errors, and other events that are important to keep NSD
running.

Verbosity 1 prints additionally messages of interest. Successful notifies, successful incoming
zone transfer (the zone is updated), failed incoming zone transfers or the inability to process
zone updates.

Verbosity 2 prints additionally soft errors, like connection resets over TCP. And notify refusal,
and axfr request refusals.

hide-version: <yes or no>
Prevent NSD from replying with the version string on CHAOS class queries. Default is no.

hide-identity: <yes or no>
Prevent NSD from replying with the identity string on CHAOS class queries. Default is no.

drop-updates: <yes or no>
If set to yes, drop received packets with the UPDATE opcode. Default is no.

use-systemd: <yes or no>
This option is deprecated and ignored. If compiled with libsystemd, NSD signals readiness to
systemd and use of the option is not necessary.

log-time-ascii: <yes or no>
Log time in ascii, if "no" then in seconds epoch. Default is yes. This chooses the format when
logging to file. The printout via syslog has a timestamp formatted by syslog.

log-time-iso: <yes or no>
Log time in ISO8601 format, if log-time-ascii: yes is also set. Default is no.

round-robin: <yes or no>
Enable round robin rotation of records in the answer. This changes the order of records in the
answer and this may balance load across them. The default is no.

minimal-responses: <yes or no>
Enable minimal responses for smaller answers. This makes packets smaller. Extra data is only
added for referrals, when it is really necessary. This is different from the --enable-minimal-
responses configure time option, that reduces packets, but exactly to the fragmentation length,
the nsd.conf option reduces packets as small as possible. The default is no.

confine-to-zone: <yes or no>
If set to yes, additional information will not be added to the response if the apex zone of the
additional information does not match the apex zone of the initial query (E.G. CNAME resolution).
Default is no.

refuse-any: <yes or no>
Refuse queries of type ANY. This is useful to stop query floods trying to get large responses.
Note that rrl ratelimiting also has type ANY as a ratelimiting type. It sends truncation in
response to UDP type ANY queries, and it allows TCP type ANY queries like normal. The default is
no. With the option turned off, NSD behaves according to RFC 8482 4.1. It minimizes the response
with one RRset. Popular and not large types, like A, AAAA and MX are preferred, and large types,
like DNSKEY and RRSIG are picked with a lower preference than other types. This makes the response
smaller.

reload-config: <yes or no>
Reload configuration file and update TSIG keys and zones on SIGHUP. Default is no.

zonefiles-check: <yes or no>
Make NSD check the mtime of zone files on start and sighup. If you disable it it starts faster
(less disk activity in case of a lot of zones). The default is yes. The nsd-control reload
command reloads zone files regardless of this option.

zonefiles-write: <seconds>
Write updated secondary zones to their zonefile every N seconds. If the zone or pattern's
"zonefile" option is set to "" (empty string), no zonefile is written. The default is 3600 (1
hour).

rrl-size: <numbuckets>
This option gives the size of the hashtable. Default 1000000. More buckets use more memory, and
reduce the chance of hash collisions.

rrl-ratelimit: <qps>
The max qps allowed (from one query source). Default is on (with a suggested 200 qps). If set to 0
then it is disabled (unlimited rate), also set the whitelist-ratelimit to 0 to disable ratelimit
processing. If you set verbosity to 2 the blocked and unblocked subnets are logged. Blocked
queries are blocked and some receive TCP fallback replies. Once the rate limit is reached, NSD
begins dropping responses. However, one in every "rrl-slip" number of responses is allowed, with
the TC bit set. If slip is set to 2, the returned response rate will be halved. If it's set to 3,
the returned response rate will be one-third, and so on. If you set rrl-slip to 10, traffic is
reduced to 1/10th. Ratelimit options rrl-ratelimit, rrl-size and rrl-whitelist-ratelimit are
updated when nsd-control reconfig is done (also the zone-specific ratelimit options are updated).

rrl-slip: <numpackets>
This option controls the number of packets discarded before we send back a SLIP response (a
response with "truncated" bit set to one). 0 disables the sending of SLIP packets, 1 means every
query will get a SLIP response. Default is 2, cuts traffic in half and legit users have a fair
chance to get a +TC response.

rrl-ipv4-prefix-length: <subnet>
IPv4 prefix length. Addresses are grouped by netblock. Default 24.

rrl-ipv6-prefix-length: <subnet>
IPv6 prefix length. Addresses are grouped by netblock. Default 64.

rrl-whitelist-ratelimit: <qps>
The max qps for query sorts for a source, which have been whitelisted. Default on (with a
suggested 2000 qps). With the rrl-whitelist option you can set specific queries to receive this
qps limit instead of the normal limit. With the value 0 the rate is unlimited.

answer-cookie: <yes or no>
Enable to answer to requests containing DNS Cookies as specified in RFC7873. Default is no.

DNS Cookies increase transaction security and provide limited protection against denial-off-
service amplification attacks. Server cookies will be created and included in responses. Server
cookies are created based on the client cookie in the request, the current time, the client's IP
address and a secret. When a client includes a valid server cookie in successive requests, the
client will not be subjected to Request Rate Limiting (see rrl-ratelimit).

Servers in an anycast deployment need to be able to verify each other's server cookies. For this
they need to share the secret used to construct and verify the cookies. These cookie secrets can
be specified in the configuration files with the cookie-secret and cookie-staging-secret options.

If no cookie secrets are provided via configuration file, server cookie secrets can be added,
dropped and activated with the nsd-control(8) tool. These secrets will be stored persistently in
the cookie secret file for which the location can be specified with the cookie-secret-file option.

If no cookie secrets are provided via configuration file, and there is no or an empty cookie
secret file, a random cookie secret is generated.

cookie-secret: <128 bit hex string>
The cookie secret with which server cookies are created and can be verified. If a cookie-secret
is specified via configuration file, cookie secrets from the cookie secret file will be ignored.

cookie-staging-secret: <128 bit hex string>
A cookie secret with which server cookies can be verified, but will not be created. This is
helpful in rolling cookie secrets in anycast setups.

A cookie-staging-secret can only be configured when there is also a cookie-secret configured.

cookie-secret-file: <filename>
File from which the secrets are read used in DNS Cookie calculations. Secrets will only be read
from this file if no cookie secrets are given in the configuration file via the cookie-secret and
cookie-staging-secret options. Default is "/var/lib/nsd/cookiesecrets.txt"

In NSD version 4.10.1 and earlier, the default location of the cookie secret file was
"/etc/nsd/nsd_cookiesecrets.txt". For migration purposes, cookie secrets will be read from that
location if no value is given for the cookie-secret-file option and when the current default
location ("/var/lib/nsd/cookiesecrets.txt") does not exist.

The content of the cookie secret file must be manipulated with the add_cookie_secret,
drop_cookie_secret and activate_cookie_secret commands to the nsd-control(8) tool. Please see
that manpage how to perform a safe cookie secret rollover.

tls-service-key: <filename>
If enabled, the server provides TLS service on TCP sockets with the TLS service port number. The
port number (853) is configured with tls-port. To turn it on, create an interface: option line in
config with @port appended to the IP-address. This creates the extra socket on which the DNS over
TLS service is provided.

The file is the private key for the TLS session. The public certificate is in the tls-service-pem
file. Default is "", turned off. Requires a restart (a reload is not enough) if changed, because
the private key is read while root permissions are held and before chroot (if any).

tls-service-pem: <filename>
The public key certificate pem file for the tls service. Default is "", turned off.

tls-service-ocsp: <filename>
The ocsp pem file for the tls service, for OCSP stapling. Default is "", turned off. An external
process prepares and updates the OCSP stapling data. Like this,

openssl ocsp -no_nonce \
-respout /path/to/ocsp.pem \
-CAfile /path/to/ca_and_any_intermediate.pem \
-issuer /path/to/direct_issuer.pem \
-cert /path/to/cert.pem \
-url "$( openssl x509 -noout -ocsp_uri -in /path/to/cert.pem )"

tls-port: <number>
The port number on which to provide TCP TLS service, default is 853, only interfaces configured
with that port number as @number get DNS over TLS service.

tls-auth-port: <number>
The port number on which to provide TCP TLS service to authenticated clients only. If you want to
use mutual TLS authentication in Transfer over TLS (XoT) connections, this is where the primary
server enables a dedicated port for this purpose. Certificates in tls-cert-bundle are used for
verifying the authenticity of a client or a secondary server.

Client (secondary) must enable tls-auth, configure client-cert and client-key and enable tls-auth
in zone configuration in order to authenticate to a remote (primary) server.

tls-auth-xfr-only: <yes or no>
Allow zone transfers only on the tls-auth-port port and only to authenticated clients. This works
globally for all zones. A provide-xfr access control list with tls-auth is also required to allow
and verify a connection. Requests for zone transfers on other ports are refused.

tls-cert-bundle: <filename>
If null or "", the default verify locations are used. Set it to the certificate bundle file, for
example "/etc/pki/tls/certs/ca-bundle.crt". These certificates are used for authenticating
Transfer over TLS (XoT) connections.

proxy-protocol-port: <number>
The port number for proxy protocol service. If the statement is given multiple times, additional
port numbers can be used for proxy protocol service. The interface definitions that use this port
number expect PROXYv2 proxy protocol traffic, for UDP, TCP and for TLS service.

metrics-enable: <yes or no>
Enable the prometheus metrics HTTP endpoint. It exposes the same statistics as the nsd-control(8)
stats_noreset command, but with metric names following the prometheus specification. (Requires
libevent2)

Beware, that when using nsd-control(8) stats (instead of stats_noreset), the statistics will be
reset for the HTTP metrics endpoint as well.

metrics-interface: <ip4 or ip6 | interface name>
NSD will bind to the listed addresses or interfaces to serve the prometheus metrics. Can be given
multiple times to bind multiple ip-addresses. Use 0.0.0.0 and ::0 to bind to the wildcard
interface.

If an interface name is used instead of ip4 or ip6, the list of IP addresses associated with that
interface is picked up and used at server start.

Default is 127.0.0.1 and ::1.

metrics-port: <number>
The port number for the HTTP service. Default is 9100.

metrics-path: <string>
The HTTP path to expose the metrics at. Default is "/metrics".

Remote Control
The remote-control: clause is used to set options for using the nsd-control(8) tool to give commands to
the running NSD server. It is disabled by default, and listens for localhost by default. It uses TLS
over TCP where the server and client authenticate to each other with self-signed certificates. The
self-signed certificates can be generated with the nsd-control-setup tool. The key files are read by NSD
before the chroot and before dropping user permissions, so they can be outside the chroot and readable by
the superuser only.

control-enable: <yes or no>
Enable remote control, default is no.

control-interface: <ip4 or ip6 | interface name | absolute path>
NSD will bind to the listed addresses to service control requests (on TCP). Can be given multiple
times to bind multiple ip-addresses. Use 0.0.0.0 and ::0 to service the wildcard interface. If
none are given NSD listens to the localhost 127.0.0.1 and ::1 interfaces for control, if control
is enabled with control-enable.

If an interface name is used instead of ip4 or ip6, the list of IP addresses associated with that
interface is picked up and used at server start.

With an absolute path, a unix local named pipe is used for control. The file is created with user
and group that is configured and access bits are set to allow members of the group access.
Further access can be controlled by setting permissions on the directory containing the control
socket file. The key and cert files are not used when control is via the named pipe, because
access control is via file and directory permission.

control-port: <number>
The port number for remote control service. 8952 by default.

server-key-file: <filename>
Path to the server private key, by default /etc/nsd/nsd_server.key. This file is generated by the
nsd-control-setup utility. This file is used by the nsd server, but not by nsd-control.

server-cert-file: <filename>
Path to the server self signed certificate, by default /etc/nsd/nsd_server.pem. This file is
generated by the nsd-control-setup utility. This file is used by the nsd server, and also by
nsd-control.

control-key-file: <filename>
Path to the control client private key, by default /etc/nsd/nsd_control.key. This file is
generated by the nsd-control-setup utility. This file is used by nsd-control.

control-cert-file: <filename>
Path to the control client certificate, by default /etc/nsd/nsd_control.pem. This certificate has
to be signed with the server certificate. This file is generated by the nsd-control-setup
utility. This file is used by nsd-control.

Verifier options
The verify: clause is used to enable or disable zone verification, configure listen interfaces and
control the global defaults.

enable: <yes or no>
Enable zone verification. Default is no.

port: <number>
The port to answer verifier queries on. Default is 5347.

ip-address:
Interfaces to bind for zone verification (default are the localhost interfaces, usually 127.0.0.1
and ::1). To bind to multiple IP addresses, list them one by one. Optionally, Socket options
cannot be specified for verify ip-address

verify-zones: <yes or no>
Verify zones by default.

verifier: <command>
When an update is received for the zone (by IXFR or AXFR) this program will be run to assess the
zone with the update. If the program exits with a status code of 0, the zone is considered good
and will be served. Any other status code will designate the zone bad and the received update will
be discarded. The zone will continue to be served but without the update.

The following environment variables are available to verifiers:

VERIFY_ZONE
The domain name of the zone to be verified.

VERIFY_ZONE_ON_STDIN
When the zone can be read from standard input (stdin), this variable is set to "yes", otherwise it
is set to "no".

VERIFY_IP_ADDRESSES
The first address on which the zones to be assessed will be served. If IPv6 is available an IPv6
address will be preferred over IPv4.

VERIFY_PORT
The port number for VERIFY_IP_ADDRESS.

VERIFY_IPV6_ADDRESS
The first IPv6 address on which the zones to be assessed will be served.

VERIFY_IPV6_PORT
The port number for VERIFY_IPV6_ADDRESS.

VERIFY_IPV4_ADDRESS
The first IPv4 address of which the zones to be assessed will be served.

VERIFY_IPV4_PORT
The port number for VERIFY_IPV4_ADDRESS.

verifier-count: <number>
Maximum number of verifiers to run concurrently. Default is 1.

verifier-feed-zone: <yes or no>
Feed the updated zone to the verifier over standard input (stdin).

verifier-timeout: <seconds>
The maximum number of seconds a verifier is allowed to run for assessing one zone. If the verifier
takes longer, it will be terminated and the zone update will be discarded. The default is 0
seconds which means the verifier may take as long as it needs.

Pattern Options
The pattern: clause is used to denote a set of options to apply to some zones. The same zone options as
for a zone are allowed.

name: <string>
The name of the pattern. This is a (case sensitive) string. The pattern names that start with
"_implicit_" are used internally for zones that have no pattern (they are defined in nsd.conf
directly).

include-pattern: <pattern-name>
The options from the given pattern are included at this point in this pattern. The referenced
pattern must be defined above this one.

<zone option>: <value>
The zone options such as zonefile, allow-query, allow-notify, request-xfr, allow-axfr-fallback,
notify, notify-retry, provide-xfr, store-ixfr, ixfr-number, ixfr-size, create-ixfr, zonestats,
outgoing-interface, verify-zone, verifier, verifier-feed-zone, verifier-timeout, catalog, and
catalog-member-pattern can be given. They are applied to the patterns and zones that include this
pattern.

Zone Options
For every zone the options need to be specified in one zone: clause. The access control list elements can
be given multiple times to add multiple servers. These elements need to be added explicitly.

For zones that are configured in the nsd.conf config file their settings are hardcoded (in an implicit
pattern for themselves only) and they cannot be deleted via delzone, but remove them from the config file
and repattern.

name: <string>
The name of the zone. This is the domain name of the apex of the zone. May end with a '.' (in FQDN
notation). For example "example.com", "sub.example.net.". This attribute must be present in each
zone.

zonefile: <filename>
The file containing the zone information. If this attribute is present it is used to read and
write the zone contents. If the attribute is absent it prevents writing out of the zone.

The string is processed so that one string can be used (in a pattern) for a lot of different
zones. If the label or character does not exist the percent-character is replaced with a period
for output (i.e. for the third character in a two letter domain name).

%s is replaced with the zone name.

%1 is replaced with the first character of the zone name.

%2 is replaced with the second character of the zone name.

%3 is replaced with the third character of the zone name.

%z is replaced with the toplevel domain name of the zone.

%y is replaced with the next label under the toplevel domain.

%x is replaced with the next-next label under the toplevel domain.

allow-query: <ip-spec> <key-name | NOKEY | BLOCKED>
Access control list. When at least one allow-query option is specified, then the specified
addresses in the allow-query options are allowed to query the server for the zone. Queries from
unlisted or specifically BLOCKED addresses are discarded. If NOKEY is given no TSIG signature is
required. BLOCKED supersedes other entries, other entries are scanned for a match in the order of
the statements. Without allow-query options, queries are allowed from any IP address without TSIG
key (which is the default).

The ip-spec is either a plain IP address (IPv4 or IPv6), or can be a subnet of the form
1.2.3.4/24, or masked like 1.2.3.4&255.255.255.0 or a range of the form 1.2.3.4-1.2.3.25. Note
the ip-spec ranges do not use spaces around the /, &, @ and - symbols.

allow-notify: <ip-spec> <key-name | NOKEY | BLOCKED>
Access control list. The listed (primary) address is allowed to send notifies to this (secondary)
server via UDP or TCP. Notifies from unlisted or specifically BLOCKED addresses are discarded. If
NOKEY is given no TSIG signature is required. BLOCKED supersedes other entries, other entries are
scanned for a match in the order of the statements.

The ip-spec is either a plain IP address (IPv4 or IPv6), or can be a subnet of the form
1.2.3.4/24, or masked like 1.2.3.4&255.255.255.0 or a range of the form 1.2.3.4-1.2.3.25. A port
number can be added using a suffix of @number, for example 1.2.3.4@5300 or 1.2.3.4/24@5300 for
port 5300. Note the ip-spec ranges do not use spaces around the /, &, @ and - symbols.

request-xfr: [AXFR|UDP] <ip-address> <key-name | NOKEY> [tls-auth-name]
Access control list. The listed address (the primary) is queried for AXFR/IXFR on update. A port
number can be added using a suffix of @number, for example 1.2.3.4@5300. The specified key is used
during AXFR/IXFR. If tls-auth-name is included, the specified tls-auth clause will be used to
perform authenticated XFR-over-TLS.

If the AXFR option is given, the server will not be contacted with IXFR queries but only AXFR
requests will be made to the server. This allows an NSD secondary to have a primary server that
runs NSD. If the AXFR option is left out then both IXFR and AXFR requests are made to the primary
server.

If the UDP option is given, the secondary will use UDP to transmit the IXFR requests. You should
deploy TSIG when allowing UDP transport, to authenticate notifies and zone transfers. Otherwise,
NSD is more vulnerable for Kaminsky-style attacks. If the UDP option is left out then IXFR will be
transmitted using TCP.

If a tls-auth-name is given then TLS (by default on port 853) will be used for all zone transfers
for the zone. If authentication of the primary, based on the specified tls-auth authentication
information, fails the XFR request will not be sent. Support for TLS 1.3 is required for XFR-over-
TLS.

allow-axfr-fallback: <yes or no>
This option should be accompanied by request-xfr. It (dis)allows NSD (as secondary) to fallback to
AXFR if the primary name server does not support IXFR. Default is yes.

size-limit-xfr: <number>
This option should be accompanied by request-xfr. It specifies XFR temporary file size limit. It
can be used to stop very large zone retrieval, that could otherwise use up a lot of memory and
disk space. If this option is 0, unlimited. Default value is 0.

notify: <ip-address> <key-name | NOKEY>
Access control list. The listed address (a secondary) is notified of updates to this zone via UDP.
A port number can be added using a suffix of @number, for example 1.2.3.4@5300. The specified key
is used to sign the notify. Only on secondary configurations will NSD be able to detect zone
updates (as it gets notified itself, or refreshes after a time).

notify-retry: <number>
This option should be accompanied by notify. It sets the number of retries when sending notifies.

provide-xfr: <ip-spec> <key-name | NOKEY | BLOCKED> [tls-auth-name]
Access control list. The listed address (a secondary) is allowed to request XFR from this server.
Zone data will be provided to the address. The specified key is used during XFR. For unlisted or
BLOCKED addresses no data is provided and requests are discarded. BLOCKED supersedes other
entries and other entries are scanned for a match in the order of the statements.

If a tls-auth-name is given then TLS authentication of the secondary will be performed for zone
transfer requests for the zone. The remote end must connect to the tls-auth-port and must present
a certificate with a SAN (Subject Alternative Name) DNS entry or CN (Common Name) entry equal to
auth-domain-name of the defined tls-auth. The certificate validify is also verified with tls-
cert-bundle. If authentication of the secondary, based on the specified tls-auth authentication
information, fails the XFR zone transfer will be refused. If the connection is performed on the
tls-port then no authentication will be performed and the transfer will not be refused. To
enforce only authenticated zone transfers, tls-auth-xfr-only should also be enabled. Support for
TLS 1.3 is required for XFR-over-TLS.

outgoing-interface: <ip-address>
Access control list. The listed address is used to request AXFR|IXFR (in case of a secondary) or
used to send notifies (in case of a primary).

The ip-address is a plain IP address (IPv4 or IPv6). A port number can be added using a suffix of
@number, for example 1.2.3.4@5300.

store-ixfr: <yes or no>
If enabled, IXFR contents are stored and provided to the set of clients specified in the
provide-xfr statement. Default is no. IXFR content is a smaller set of changes that differ between
zone versions, whereas an AXFR contains the full contents of the zone.

ixfr-number: <number>
The number of IXFR versions to store for this zone, at most. Default is 5.

ixfr-size: <number>
The max storage to use for IXFR versions for this zone, in bytes. Default is 1048576. A value of
0 means unlimited. If you want to turn off IXFR storage, set the store-ixfr option to no. NSD
does not elide IXFR contents from versions that add and remove the same data. It stores and
transmits IXFRs as they were transmitted by the upstream server.

create-ixfr: <yes or no>
If enabled, IXFR data is created when a zonefile is read by the server. This requires store-ixfr
to be set to yes, so that the IXFR contents are saved to disk. Default is off. If the server is
not running, the nsd-checkzone -i option can be used to create an IXFR file. When an IXFR is
created, the server spools a version of the zone to a temporary file, at the location where the
ixfr files are stored. This creates IXFR data when the zone is read from file, but not when a zone
is read by AXFR transfer from a server, because then the topmost server that originates the data
is the one place where IXFR differences are computed and those differences are then transmitted
verbatim to all the other servers.

max-refresh-time: <seconds>
Limit refresh time for secondary zones. This is the timer which checks to see if the zone has to
be refetched when it expires. Normally the value from the SOA record is used, but this option
restricts that value.

min-refresh-time: <seconds>
Limit refresh time for secondary zones.

max-retry-time: <seconds>
Limit retry time for secondary zones. This is the timer which retries after a failed fetch
attempt for the zone. Normally the value from the SOA record is used, followed by an exponential
backoff, but this option restricts that value.

min-retry-time: <seconds>
Limit retry time for secondary zones.

min-expire-time: <seconds or refresh+retry+1>
Limit expire time for secondary zones. The value can be expressed either by a number of seconds,
or the string "refresh+retry+1". With the latter the expire time will be lower bound to the
refresh plus the retry value from the SOA record, plus 1. The refresh and retry values will be
subject to the bounds configured with max-refresh-time, min-refresh-time, max-retry-time and
min-retry-time if given.

zonestats: <name>
When compiled with --enable-zone-stats NSD can collect statistics per zone. This name gives the
group where statistics are added to. The groups are output from nsd-control stats and
stats_noreset. Default is "". You can use "%s" to use the name of the zone to track its
statistics. If not compiled in, the option can be given but is ignored.

include-pattern: <pattern-name>
The options from the given pattern are included at this point. The referenced pattern must be
defined above this zone.

rrl-whitelist: <rrltype>
This option causes queries of this rrltype to be whitelisted, for this zone. They receive the
whitelist-ratelimit. You can give multiple lines, each enables a new rrltype to be whitelisted for
the zone. Default has none whitelisted. The rrltype is the query classification that the NSD RRL
employs to make different types not interfere with one another. The types are logged in the
loglines when a subnet is blocked (in verbosity 2). The RRL classification types are: nxdomain,
error, referral, any, rrsig, wildcard, nodata, dnskey, positive, all.

multi-primary-check: <yes or no>
Default no. If enabled, checks all primaries for the last version. It uses the higher version of
all the configured primaries. Useful if you have multiple primaries that have different version
numbers served.

verify-zone: <yes or no>
Enable or disable verification for this zone. Default is value-zones configured in verify:.

verifier: <command>
Command to execute to assess this zone. Default is verifier configured in verify:.

verifier-feed-zone: <yes or no>
Feed updated zone to verifier over standard input. Default is verifier-feed-zone configured in
verify:.

verifier-timeout: <seconds>
Number of seconds before verifier is forcefully terminated. Specify 0 (zero) to not use a specific
timeout. Default is verifier-timeout from verify:.

catalog: <consumer or producer>
If set to consumer, catalog zone processing is enabled for the zone. Only a single zone may be
configured as a catalog consumer zone. When more than one catalog consumer zone is configured,
none of them will be processed. Member zones of the catalog will use the pattern specified by the
group property, or if a group property is missing or invalid, the pattern specified by the
catalog-member-pattern option is used. Group properties are valid if there is only a single value
matching the name of a for member zones valid pattern.

A zone with the option set to producer, can be used to produce a catalog zone. Member zones for
catalog producer zones can be added with "nsd-control addzone <zone> <pattern>", where <pattern>
has a catalog-producer-zone option pointing to a catalog producer zone. Members will get a group
property with the pattern name as value. Catalog producer zones must be primary zones and may not
have a request-xfr option. Catalog producer zones will not read content from zone files, but will
reconstruct the zone on startup from the member zone entries in /var/lib/nsd/zone.list, specified
with the zonelistfile option.

The status of both catalog consumer and producer zones can be verified with nsd-control
zonestatus. It will show the number of member zones and, if the catalog zone is invalid, the
reason for it to be invalid is shown. nsd-control zonestatus will also show the entry of a
catalog member zone in the catalog (consumer or producer) zone as catalog-member-id:.

A catalog zone can either be catalog consumer zone or a catalog producer zone but not both.
Likewise, catalog member zones can be either a member of catalog consumer zone or a catalog
producer zone but not both.

Catalog zones contain a list of zones that are served. Use allow-query: 0.0.0.0/0 BLOCKED and
allow-query: ::0/0 BLOCKED in a catalog zone zone or pattern clause to prevent revealing the
catalog. Also consider using transfers over TLS to further protect the catalog against
eavesdroppers.

catalog-member-pattern: <pattern-name>
If this option is provided for a catalog consumer zone, members of that catalog that have a
missing or an invalid group property will be added using pattern <pattern-name>.

catalog-producer-zone: <zone-name>
This option can only be used in a pattern. Adding a zone using "nsd-control addzone <zone>
<pattern>" with a <pattern> containing this option, will cause a catalog member entry to be
created in the catalog producer zone <zone-name>. <zone-name> must exist and must be a valid
catalog producer zone.

Key Declarations
The key: clause establishes a key for use in access control lists. It has the following attributes.

name: <string>
The key name. Used to refer to this key in the access control list. The key name has to be
correct for tsig to work. This is because the key name is output on the wire.

algorithm: <string>
Authentication algorithm for this key. Such as hmac-md5, hmac-sha1, hmac-sha224, hmac-sha256,
hmac-sha384 and hmac-sha512. Can also be abbreviated as 'sha1', 'sha256'. Default is sha256.
Algorithms are only available when they were compiled in (available in the crypto library).

secret: <base64 blob>
The base64 encoded shared secret. It is possible to put the secret: declaration (and base64 blob)
into a different file, and then to include: that file. In this way the key secret and the rest of
the configuration file, which may have different security policies, can be split apart. The
content of the secret is the agreed base64 secret content. To make it up, enter a password (its
length must be a multiple of 4 characters, A-Za-z0-9), or use dev-random output through a base64
encode filter.

TLS Auth Declarations
The tls-auth: clause establishes attributes to use when authenticating the far end of a TLS connection as
well as to define credentials to authenticate to a remote server. It is used in access control lists for
XFR-over-TLS. It has the following attributes.

name: <string>
The tls-auth name. Used to refer to this TLS authentication information in the access control
list.

auth-domain-name: <string>
The authentication domain name as defined in RFC8310. Used to verify the certificate of the remote
connecting server. When used by a primary server in provide-xfr it verifies the secondary. When
used by a secondary server in request-xfr it verifies the primary.

client-cert: <file name of clientcert.pem>
If you want to use mutual TLS authentication, this is where the client certificates can be
configured that NSD uses to connect to the upstream server to download the zone. The client public
key pem cert file can be configured here. Also configure a private key with client-key.

client-key: <file name of clientkey.key>
If you want to use mutual TLS authentication, the private key file can be configured here for the
client authentication.

client-key-pw: <string>
If the client-key file uses a password to decrypt the key before it can be used, then the password
can be specified here as a string. It is possible to include other config files with the include:
option, and this can be used to move that sensitive data to another file, if you wish.

DNSTAP Logging Options
DNSTAP support, when compiled in, is enabled in the dnstap: section. This starts a collector process
that writes the log information to the destination.

dnstap-enable: <yes or no>
If dnstap is enabled. Default no. If yes, it connects to the dnstap server and if any of the
dnstap-log-..-messages options is enabled it sends logs for those messages to the server.

dnstap-socket-path: <file name>
Sets the unix socket file name for connecting to the server that is listening on that socket.
Default is "/var/run/nsd-dnstap.sock".

dnstap-ip: <"" or addr[@port]>
If disabled with "", the socket path is used. With a value, like address or address@port, like
"127.0.0.1@3333" TCP or TLS is used. Default is "".

dnstap-tls: <yes or no>
If enabled, TLS is used to the address specified in dnstap-ip. Otherwise, TCP is used. Default is
yes.

dnstap-tls-server-name: <string>
The name for authenticating the upstream server. With "" disabled.

dnstap-tls-client-key-file: <file name>
The key file for client authentication, or "" disabled.

dnstap-tls-client-cert-file: <file name>
The cert file for client authentication, or "" disabled.

dnstap-send-identity: <yes or no>
If enabled, the server identity is included in the log messages. Default is no.

dnstap-send-version: <yes or no>
If enabled, the server version if included in the log messages. Default is no.

dnstap-identity: <string>
The identity to send with messages, if "" the hostname is used. Default is "".

dnstap-version: <string>
The version to send with messages, if "" the package version is used. Default is "".

dnstap-log-auth-query-messages: <yes or no>
Enable to log auth query messages. Default is no. These are client queries to NSD.

dnstap-log-auth-response-messages: <yes or no>
Enable to log auth response messages. Default is no. These are responses from NSD to clients.

NSD CONFIGURATION FOR BIND9 HACKERS

BIND9 is a name server implementation with its own configuration file format, named.conf(5). BIND9 types
zones as 'Primary' or 'Secondary'.

Secondary zones
For a secondary zone, the primary servers are listed. The primary servers are queried for zone data, and
are listened to for update notifications. In NSD these two properties need to be configured separately,
by listing the primary address in allow-notify and request-xfr statements.

In BIND9 you only need to provide allow-notify elements for any extra sources of notifications (i.e. the
operators), NSD needs to have allow-notify for both primaries and operators. BIND9 allows additional
transfer sources, in NSD you list those as request-xfr.

Here is an example of a secondary zone in BIND9 syntax.

# Config file for example.org
options {
dnssec-enable yes;
};

key tsig.example.org. {
algorithm hmac-md5;
secret "aaaaaabbbbbbccccccdddddd";
};

server 162.0.4.49 {
keys { tsig.example.org. ; };
};

zone "example.org" {
type secondary;
file "secondary/example.org.signed";
primaries { 162.0.4.49; };
};
For NSD, DNSSEC is enabled automatically for zones that are signed. The dnssec-enable statement in the
options clause is not needed. In NSD keys are associated with an IP address in the access control list
statement, therefore the server{} statement is not needed. Below is the same example in an NSD config
file.

# Config file for example.org
key:
name: tsig.example.org.
algorithm: hmac-md5
secret: "aaaaaabbbbbbccccccdddddd"

zone:
name: "example.org"
zonefile: "secondary/example.org.signed"
# the primary is allowed to notify and will provide zone data.
allow-notify: 162.0.4.49 NOKEY
request-xfr: 162.0.4.49 tsig.example.org.

Notice that the primary is listed twice, once to allow it to send notifies to this secondary server and
once to tell the secondary server where to look for updates zone data. More allow-notify and request-xfr
lines can be added to specify more primaries.

It is possible to specify extra allow-notify lines for addresses that are also allowed to send
notifications to this secondary server.

Primary zones
For a primary zone in BIND9, the secondary servers are listed. These secondary servers are sent
notifications of updated and are allowed to request transfer of the zone data. In NSD these two
properties need to be configured separately.

Here is an example of a primary zone in BIND9 syntax.

zone "example.nl" {
type primary;
file "example.nl";
};

In NSD syntax this becomes:

zone:
name: "example.nl"
zonefile: "example.nl"
# allow anybody to request xfr.
provide-xfr: 0.0.0.0/0 NOKEY
provide-xfr: ::0/0 NOKEY

# to list a secondary server you would in general give
# provide-xfr: 1.2.3.4 tsig-key.name.
# notify: 1.2.3.4 NOKEY

Other
NSD is an authoritative only DNS server. This means that it is meant as a primary or secondary server for
zones, providing DNS data to DNS resolvers and caches. BIND9 can function as an authoritative DNS server,
the configuration options for that are compared with those for NSD in this section. However, BIND9 can
also function as a resolver or cache. The configuration options that BIND9 has for the resolver or
caching thus have no equivalents for NSD.

FILES

       /etc/nsd/nsd.conf
              default NSD configuration file

AUTHORS

       NSD was written by a combined team from NLnet Labs and RIPE NCC. Please  see  the  CREDITS  file  in  the
       distribution for further details.

BUGS

       nsd.conf is parsed by a primitive parser. Error messages may not be to the point.

NLnet Labs                                        Apr 24, 2025                                       nsd.conf(5)

NAME

SYNOPSIS

DESCRIPTION

EXAMPLE

FILE FORMAT

NSD CONFIGURATION FOR BIND9 HACKERS

FILES

SEE ALSO

AUTHORS

BUGS