Provided by: isc-dhcp-client_4.4.3-P1-4ubuntu2_amd64 
NAME
dhclient.conf - DHCP client configuration file
DESCRIPTION
The dhclient.conf file contains configuration information for dhclient, the Internet Systems Consortium
DHCP Client.
The dhclient.conf file is a free-form ASCII text file. It is parsed by the recursive-descent parser
built into dhclient. The file may contain extra tabs and newlines for formatting purposes. Keywords in
the file are case-insensitive. Comments may be placed anywhere within the file (except within quotes).
Comments begin with the # character and end at the end of the line.
The dhclient.conf file can be used to configure the behaviour of the client in a wide variety of ways:
protocol timing, information requested from the server, information required of the server, defaults to
use if the server does not provide certain information, values with which to override information
provided by the server, or values to prepend or append to information provided by the server. The
configuration file can also be preinitialized with addresses to use on networks that don't have DHCP
servers.
PROTOCOL TIMING
The timing behaviour of the client need not be configured by the user. If no timing configuration is
provided by the user, a fairly reasonable timing behaviour will be used by default - one which results in
fairly timely updates without placing an inordinate load on the server.
If required the following statements can be used to adjust the timing behaviour of the DHCPv4 client.
The DHCPv6 protocol provides values to use and they are not currently configurable.
The timeout statement
timeout time;
The timeout statement determines the amount of time that must pass between the time that the client
begins to try to determine its address and the time that it decides that it's not going to be able to
contact a server. By default, this timeout is 300 seconds. After the timeout has passed, if there are
any static leases defined in the configuration file, or any leases remaining in the lease database that
have not yet expired, the client will loop through these leases attempting to validate them, and if it
finds one that appears to be valid, it will use that lease's address. If there are no valid static
leases or unexpired leases in the lease database, the client will restart the protocol after the defined
retry interval.
The retry statement
retry time;
The retry statement determines the time that must pass after the client has determined that there is no
DHCP server present before it tries again to contact a DHCP server. By default, this is five minutes.
The select-timeout statement
select-timeout time;
It is possible (some might say desirable) for there to be more than one DHCP server serving any given
network. In this case, it is possible that a client may be sent more than one offer in response to its
initial lease discovery message. It may be that one of these offers is preferable to the other (e.g.,
one offer may have the address the client previously used, and the other may not).
The select-timeout is the time after the client sends its first lease discovery request at which it stops
waiting for offers from servers, assuming that it has received at least one such offer. If no offers
have been received by the time the select-timeout has expired, the client will accept the first offer
that arrives.
By default, the select-timeout is zero seconds - that is, the client will take the first offer it sees.
The reboot statement
reboot time;
When the client is restarted, it first tries to reacquire the last address it had. This is called the
INIT-REBOOT state. If it is still attached to the same network it was attached to when it last ran, this
is the quickest way to get started. The reboot statement sets the time that must elapse after the client
first tries to reacquire its old address before it gives up and tries to discover a new address. By
default, the reboot timeout is ten seconds.
The backoff-cutoff statement
backoff-cutoff time;
The client uses an exponential backoff algorithm with some randomness, so that if many clients try to
configure themselves at the same time, they will not make their requests in lockstep. The backoff-cutoff
statement determines the maximum amount of time that the client is allowed to back off, the actual value
will be evaluated randomly between 1/2 to 1 1/2 times the time specified. It defaults to fifteen
seconds.
The initial-interval statement
initial-interval time;
The initial-interval statement sets the amount of time between the first attempt to reach a server and
the second attempt to reach a server. Each time a message is sent, the interval between messages is
incremented by twice the current interval multiplied by a random number between zero and one. If it is
greater than the backoff-cutoff amount, it is set to that amount. It defaults to ten seconds.
The initial-delay statement
initial-delay time;
initial-delay parameter sets the maximum time client can wait after start before commencing first
transmission. According to RFC2131 Section 4.4.1, client should wait a random time between startup and
the actual first transmission. Previous versions of ISC DHCP client used to wait random time up to 5
seconds, but that was unwanted due to impact on startup time. As such, new versions have the default
initial delay set to 0. To restore old behavior, please set initial-delay to 5.
DHCPv6 LEASE SELECTION
In the DHCPv6 protocol the client will wait a small amount of time to allow ADVERTISE messages from
multiple servers to arrive. It will then need to choose from all of the messages that may have arrived
before proceeding to making a request of the selected server.
The first selection criteria is the set of options and addresses in the message. Messages that don't
include an option specified as required will be given a score of 0 and not used. If the -R option is
given on the command line then messages that don't include the correct number of bindings (IA-NA, IA-TA
or IA-PD) will be discarded.
The next criteria is the preference value from the message. With the highest preference value being used
even if leases with better addresses or options are available.
Finally the lease is scored and the lease with the highest score is selected. A lease's score is based
on the number of bindings, number of addresses and number of options it contains:
bindings * X + addresses * Y + options
By default X = 10000 and Y = 100, this will cause the client to select a lease with more bindings over a
lease with less bindings but more addresses. The weightings were changed as part of implementing RFC
7550. Previously they were X = 50 and Y = 100 meaning more addresses were preferred over more bindings.
If you wish to continue using the old style you may do so by editing the file includes/site.h and
uncommenting the define for USE_ORIGINAL_CLIENT_LEASE_WEIGHTS.
LEASE REQUIREMENTS AND REQUESTS
The DHCP protocol allows the client to request that the server send it specific information, and not send
it other information that it is not prepared to accept. The protocol also allows the client to reject
offers from servers if they don't contain information the client needs, or if the information provided is
not satisfactory.
There is a variety of data contained in offers that DHCP servers send to DHCP clients. The data that can
be specifically requested is what are called DHCP Options. DHCP Options are defined in
dhcp-options(5).
The request statement
[ also ] request [ [ option-space . ] option ] [, ... ];
The request statement causes the client to request that any server responding to the client send the
client its values for the specified options. Only the option names should be specified in the request
statement - not option parameters. By default, the DHCPv4 client requests the subnet-mask, broadcast-
address, time-offset, routers, domain-name, domain-name-servers and host-name options while the DHCPv6
client requests the dhcp6 name-servers and domain-search options. Note that if you enter a ´request´
statement, you over-ride these defaults and these options will not be requested.
In some cases, it may be desirable to send no parameter request list at all. To do this, simply write
the request statement but specify no parameters:
request;
In most cases, it is desirable to simply add one option to the request list which is of interest to the
client in question. In this case, it is best to ´also request´ the additional options:
also request domain-search, dhcp6.sip-servers-addresses;
The require statement
[ also ] require [ [ option-space . ] option ] [, ... ];
The require statement lists options that must be sent in order for an offer to be accepted. Offers that
do not contain all the listed options will be ignored. There is no default require list.
require name-servers;
interface eth0 {
also require domain-search;
}
The send statement
send [ option declaration ] ;
The send statement causes the client to send the specified option to the server with the specified value.
This is a full option declaration as described in dhcp-options(5). Options that are always sent in the
DHCP protocol should not be specified here, except that the client can specify a requested dhcp-lease-
time option other than the default requested lease time, which is two hours. The other obvious use for
this statement is to send information to the server that will allow it to differentiate between this
client and other clients or kinds of clients.
DYNAMIC DNS
The client now has some very limited support for doing DNS updates when a lease is acquired. This is
prototypical, and probably doesn't do what you want. It also only works if you happen to have control
over your DNS server, which isn't very likely.
Note that everything in this section is true whether you are using DHCPv4 or DHCPv6. The exact same
syntax is used for both.
To make it work, you have to declare a key and zone as in the DHCP server (see dhcpd.conf(5) for
details). You also need to configure the fqdn option on the client, as follows:
send fqdn.fqdn "grosse.example.com.";
send fqdn.encoded on;
send fqdn.server-update off;
also request fqdn, dhcp6.fqdn;
The fqdn.fqdn option MUST be a fully-qualified domain name. You MUST define a zone statement for the
zone to be updated. The fqdn.encoded option may need to be set to on or off, depending on the DHCP
server you are using.
The do-forward-updates statement
do-forward-updates [ flag ] ;
If you want to do DNS updates in the DHCP client script (see dhclient-script(8)) rather than having the
DHCP client do the update directly (for example, if you want to use SIG(0) authentication, which is not
supported directly by the DHCP client, you can instruct the client not to do the update using the do-
forward-updates statement. Flag should be true if you want the DHCP client to do the update, and false
if you don't want the DHCP client to do the update. By default, the DHCP client will do the DNS update.
OPTION MODIFIERS
In some cases, a client may receive option data from the server which is not really appropriate for that
client, or may not receive information that it needs, and for which a useful default value exists. It
may also receive information which is useful, but which needs to be supplemented with local information.
To handle these needs, several option modifiers are available.
The default statement
default [ option declaration ] ;
If for some option the client should use the value supplied by the server, but needs to use some default
value if no value was supplied by the server, these values can be defined in the default statement.
The supersede statement
supersede [ option declaration ] ;
If for some option the client should always use a locally-configured value or values rather than whatever
is supplied by the server, these values can be defined in the supersede statement.
The prepend statement
prepend [ option declaration ] ;
If for some set of options the client should use a value you supply, and then use the values supplied by
the server, if any, these values can be defined in the prepend statement. The prepend statement can only
be used for options which allow more than one value to be given. This restriction is not enforced - if
you ignore it, the behaviour will be unpredictable.
The append statement
append [ option declaration ] ;
If for some set of options the client should first use the values supplied by the server, if any, and
then use values you supply, these values can be defined in the append statement. The append statement
can only be used for options which allow more than one value to be given. This restriction is not
enforced - if you ignore it, the behaviour will be unpredictable.
LEASE DECLARATIONS
The lease declaration
lease { lease-declaration [ ... lease-declaration ] }
The DHCP client may decide after some period of time (see PROTOCOL TIMING) that it is not going to
succeed in contacting a server. At that time, it consults its own database of old leases and tests each
one that has not yet timed out by pinging the listed router for that lease to see if that lease could
work. It is possible to define one or more fixed leases in the client configuration file for networks
where there is no DHCP or BOOTP service, so that the client can still automatically configure its
address. This is done with the lease statement.
NOTE: the lease statement is also used in the dhclient.leases file in order to record leases that have
been received from DHCP servers. Some of the syntax for leases as described below is only needed in the
dhclient.leases file. Such syntax is documented here for completeness.
A lease statement consists of the lease keyword, followed by a left curly brace, followed by one or more
lease declaration statements, followed by a right curly brace. The following lease declarations are
possible:
bootp;
The bootp statement is used to indicate that the lease was acquired using the BOOTP protocol rather than
the DHCP protocol. It is never necessary to specify this in the client configuration file. The client
uses this syntax in its lease database file.
interface "string";
The interface lease statement is used to indicate the interface on which the lease is valid. If set,
this lease will only be tried on a particular interface. When the client receives a lease from a server,
it always records the interface number on which it received that lease. If predefined leases are
specified in the dhclient.conf file, the interface should also be specified, although this is not
required.
fixed-address ip-address;
The fixed-address statement is used to set the ip address of a particular lease. This is required for
all lease statements. The IP address must be specified as a dotted quad (e.g., 12.34.56.78).
filename "string";
The filename statement specifies the name of the boot filename to use. This is not used by the standard
client configuration script, but is included for completeness.
server-name "string";
The server-name statement specifies the name of the boot server name to use. This is also not used by
the standard client configuration script.
option option-declaration;
The option statement is used to specify the value of an option supplied by the server, or, in the case of
predefined leases declared in dhclient.conf, the value that the user wishes the client configuration
script to use if the predefined lease is used.
script "script-name";
The script statement is used to specify the pathname of the dhcp client configuration script. This
script is used by the dhcp client to set each interface's initial configuration prior to requesting an
address, to test the address once it has been offered, and to set the interface's final configuration
once a lease has been acquired. If no lease is acquired, the script is used to test predefined leases,
if any, and also called once if no valid lease can be identified. For more information, see dhclient-
script(8).
vendor option space "name";
The vendor option space statement is used to specify which option space should be used for decoding the
vendor-encapsulate-options option if one is received. The dhcp-vendor-identifier can be used to request
a specific class of vendor options from the server. See dhcp-options(5) for details.
medium "media setup";
The medium statement can be used on systems where network interfaces cannot automatically determine the
type of network to which they are connected. The media setup string is a system-dependent parameter
which is passed to the dhcp client configuration script when initializing the interface. On Unix and
Unix-like systems, the argument is passed on the ifconfig command line when configuring the interface.
The dhcp client automatically declares this parameter if it uses a media type (see the media statement)
when configuring the interface in order to obtain a lease. This statement should be used in predefined
leases only if the network interface requires media type configuration.
renew date;
rebind date;
expire date;
The renew statement defines the time at which the dhcp client should begin trying to contact its server
to renew a lease that it is using. The rebind statement defines the time at which the dhcp client should
begin to try to contact any dhcp server in order to renew its lease. The expire statement defines the
time at which the dhcp client must stop using a lease if it has not been able to contact a server in
order to renew it.
These declarations are automatically set in leases acquired by the DHCP client, but must also be
configured in predefined leases - a predefined lease whose expiry time has passed will not be used by the
DHCP client.
Dates are specified in one of two ways. The software will output times in these two formats depending on
if the db-time-format configuration parameter has been set to default or local.
If it is set to default, then date values appear as follows:
<weekday> <year>/<month>/<day> <hour>:<minute>:<second>
The weekday is present to make it easy for a human to tell when a lease expires - it's specified as a
number from zero to six, with zero being Sunday. When declaring a predefined lease, it can always be
specified as zero. The year is specified with the century, so it should generally be four digits except
for really long leases. The month is specified as a number starting with 1 for January. The day of the
month is likewise specified starting with 1. The hour is a number between 0 and 23, the minute a number
between 0 and 59, and the second also a number between 0 and 59.
If the db-time-format configuration was set to local, then the date values appear as follows:
epoch <seconds-since-epoch>; # <day-name> <month-name> <day-number> <hours>:<minutes>:<seconds> <year>
The seconds-since-epoch is as according to the system's local clock (often referred to as "unix time").
The # symbol supplies a comment that describes what actual time this is as according to the system's
configured timezone, at the time the value was written. It is provided only for human inspection, the
epoch time is the only recommended value for machine inspection.
Note that when defining a static lease, one may use either time format one wishes, and need not include
the comment or values after it.
If the time is infinite in duration, then the date is never instead of an actual date.
ALIAS DECLARATIONS
alias { declarations ... }
Some DHCP clients running TCP/IP roaming protocols may require that in addition to the lease they may
acquire via DHCP, their interface also be configured with a predefined IP alias so that they can have a
permanent IP address even while roaming. The Internet Systems Consortium DHCP client doesn't support
roaming with fixed addresses directly, but in order to facilitate such experimentation, the dhcp client
can be set up to configure an IP alias using the alias declaration.
The alias declaration resembles a lease declaration, except that options other than the subnet-mask
option are ignored by the standard client configuration script, and expiry times are ignored. A typical
alias declaration includes an interface declaration, a fixed-address declaration for the IP alias
address, and a subnet-mask option declaration. A medium statement should never be included in an alias
declaration.
OTHER DECLARATIONS
db-time-format [ default | local ] ;
The db-time-format option determines which of two output methods are used for printing times in leases
files. The default format provides day-and-time in UTC, whereas local uses a seconds-since-epoch to
store the time value, and helpfully places a local timezone time in a comment on the same line. The
formats are described in detail in this manpage, within the LEASE DECLARATIONS section.
The lease-id-format parameter
lease-id-format format;
The format parameter must be either octal or hex. This parameter governs the format used to write
certain values to lease files. With the default format, octal, values are written as quoted strings in
which non-printable characters are represented as octal escapes - a backslash character followed by
three octal digits. When the hex format is specified, values are written as an unquoted series of
hexadecimal digit pairs, separated by colons.
Currently, the values written out based on lease-id-format are the default-duid and the IAID value
(DHCPv6 only). The client automatically reads the values in either format. Note that when the format
is octal, rather than as an octal string, IAID is output as hex if it contains no printable characters
or as a string if contains only printable characters. This is done to maintain backward compatibility.
reject cidr-ip-address [, ... cidr-ip-address ] ;
The reject statement causes the DHCP client to reject offers from servers whose server identifier
matches any of the specified hosts or subnets. This can be used to avoid being configured by rogue or
misconfigured dhcp servers, although it should be a last resort - better to track down the bad DHCP
server and fix it.
The cidr-ip-address configuration type is of the form ip-address[/prefixlen], where ip-address is a
dotted quad IP address, and prefixlen is the CIDR prefix length of the subnet, counting the number of
significant bits in the netmask starting from the leftmost end. Example configuration syntax:
reject 192.168.0.0/16, 10.0.0.5;
The above example would cause offers from any server identifier in the entire RFC 1918 "Class C"
network 192.168.0.0/16, or the specific single address 10.0.0.5, to be rejected.
interface "name" { declarations ... }
A client with more than one network interface may require different behaviour depending on which
interface is being configured. All timing parameters and declarations other than lease and alias
declarations can be enclosed in an interface declaration, and those parameters will then be used only
for the interface that matches the specified name. Interfaces for which there is no interface
declaration will use the parameters declared outside of any interface declaration, or the default
settings.
Note well: ISC dhclient only maintains one list of interfaces, which is either determined at startup
from command line arguments, or otherwise is autodetected. If you supplied the list of interfaces on
the command line, this configuration clause will add the named interface to the list in such a way that
will cause it to be configured by DHCP. Which may not be the result you had intended. This is an
undesirable side effect that will be addressed in a future release.
pseudo "name" "real-name" { declarations ... }
Under some circumstances it can be useful to declare a pseudo-interface and have the DHCP client
acquire a configuration for that interface. Each interface that the DHCP client is supporting normally
has a DHCP client state machine running on it to acquire and maintain its lease. A pseudo-interface is
just another state machine running on the interface named real-name, with its own lease and its own
state. If you use this feature, you must provide a client identifier for both the pseudo-interface and
the actual interface, and the two identifiers must be different. You must also provide a separate
client script for the pseudo-interface to do what you want with the IP address. For example:
interface "ep0" {
send dhcp-client-identifier "my-client-ep0";
}
pseudo "secondary" "ep0" {
send dhcp-client-identifier "my-client-ep0-secondary";
script "/etc/dhclient-secondary";
}
The client script for the pseudo-interface should not configure the interface up or down - essentially,
all it needs to handle are the states where a lease has been acquired or renewed, and the states where
a lease has expired. See dhclient-script(8) for more information.
media "media setup" [ , "media setup", ... ];
The media statement defines one or more media configuration parameters which may be tried while
attempting to acquire an IP address. The dhcp client will cycle through each media setup string on the
list, configuring the interface using that setup and attempting to boot, and then trying the next one.
This can be used for network interfaces which aren't capable of sensing the media type unaided -
whichever media type succeeds in getting a request to the server and hearing the reply is probably
right (no guarantees).
The media setup is only used for the initial phase of address acquisition (the DHCPDISCOVER and
DHCPOFFER packets). Once an address has been acquired, the dhcp client will record it in its lease
database and will record the media type used to acquire the address. Whenever the client tries to
renew the lease, it will use that same media type. The lease must expire before the client will go
back to cycling through media types.
hardware link-type mac-address;
The hardware statement defines the hardware MAC address to use for this interface, for DHCP servers or
relays to direct their replies. dhclient will determine the interface's MAC address automatically, so
use of this parameter is not recommended. The link-type corresponds to the interface's link layer type
(example: ´ethernet´), while the mac-address is a string of colon-separated hexadecimal values for
octets.
anycast-mac link-type mac-address;
The anycast-mac statement over-rides the all-ones broadcast MAC address dhclient will use when it is
transmitting packets to the all-ones limited broadcast IPv4 address. This configuration parameter is
useful to reduce the number of broadcast packets transmitted by DHCP clients, but is only useful if you
know the DHCP service(s) anycast MAC address prior to configuring your client. The link-type and mac-
address parameters are configured in a similar manner to the hardware statement.
SAMPLE
The following configuration file was used on a laptop running NetBSD 1.3, though the domains have been
modified. The laptop has an IP alias of 192.5.5.213, and has one interface, ep0 (a 3com 3C589C).
Booting intervals have been shortened somewhat from the default, because the client is known to spend
most of its time on networks with little DHCP activity. The laptop does roam to multiple networks.
timeout 300;
retry 60;
reboot 10;
select-timeout 5;
initial-interval 2;
reject 192.33.137.209;
interface "ep0" {
send host-name "andare.example.com";
hardware ethernet 00:a0:24:ab:fb:9c;
send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
send dhcp-lease-time 3600;
supersede domain-search "example.com", "rc.isc.org", "home.isc.org";
prepend domain-name-servers 127.0.0.1;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, host-name;
require subnet-mask, domain-name-servers;
script "/sbin/dhclient-script";
media "media 10baseT/UTP", "media 10base2/BNC";
}
alias {
interface "ep0";
fixed-address 192.5.5.213;
option subnet-mask 255.255.255.255;
}
This is a very complicated dhclient.conf file - in general, yours should be much simpler. In many cases,
it's sufficient to just create an empty dhclient.conf file - the defaults are usually fine.
SEE ALSO
dhcp-options(5), dhcp-eval(5), dhclient.leases(5), dhcpd(8), dhcpd.conf(5), RFC2132, RFC2131.
AUTHOR
dhclient(8) Information about Internet Systems Consortium can be found at https://www.isc.org.
dhclient.conf(5)