Provided by: buildah_1.39.3+ds1-1syncable1_amd64 
NAME
buildah-run - Run a command inside of the container.
SYNOPSIS
buildah run [options] [--] container command
DESCRIPTION
Launches a container and runs the specified command in that container using the container's root
filesystem as a root filesystem, using configuration settings inherited from the container's image or as
specified using previous calls to the buildah config command. To execute buildah run within an
interactive shell, specify the --tty option.
OPTIONS
--add-history
Add an entry to the history which will note what command is being invoked. Defaults to false.
Note: You can also override the default value of --add-history by setting the BUILDAH_HISTORY environment
variable. export BUILDAH_HISTORY=true
--cap-add=CAP_xxx
Add the specified capability to the set of capabilities which will be granted to the specified command.
Certain capabilities are granted by default; this option can be used to add more beyond the defaults,
which may have been modified by --cap-add and --cap-drop options used with the buildah from invocation
which created the container.
--cap-drop=CAP_xxx
Drop the specified capability from the set of capabilities which will be granted to the specified
command. The CAP_CHOWN, CAP_DAC_OVERRIDE, CAP_FOWNER, CAP_FSETID, CAP_KILL, CAP_NET_BIND_SERVICE,
CAP_SETFCAP, CAP_SETGID, CAP_SETPCAP, and CAP_SETUID capabilities are granted by default; this option can
be used to remove them from the defaults, which may have been modified by --cap-add and --cap-drop
options used with the buildah from invocation which created the container. The list of default
capabilities is managed in containers.conf(5).
If a capability is specified to both the --cap-add and --cap-drop options, it will be dropped, regardless
of the order in which the options were given.
--cgroupns how
Sets the configuration for the cgroup namespaces for the container. The configured value can be "" (the
empty string) or "private" to indicate that a new cgroup namespace should be created, or it can be "host"
to indicate that the cgroup namespace in which buildah itself is being run should be reused.
--contextdir directory
Allows setting context directory for current RUN invocation. Specifying a context directory causes RUN
context to consider context directory as root directory for specified source in --mount of type 'bind'.
--device=device
Add a host device, or devices under a directory, to the environment in which the command will be run.
The optional permissions parameter can be used to specify device permissions, using any one or more of r
for read, w for write, and m for mknod(2).
Example: --device=/dev/sdc:/dev/xvdc:rwm.
Note: if host-device is a symbolic link then it will be resolved first. The container will only store
the major and minor numbers of the host device.
The device to share can also be specified using a Container Device Interface (CDI) specification
(https://github.com/cncf-tags/container-device-interface).
Note: if the user only has access rights via a group, accessing the device from inside a rootless
container will fail. The crun(1) runtime offers a workaround for this by adding the option --annotation
run.oci.keep_original_groups=1.
--env, -e env=value
Temporarily add a value (e.g. env=value) to the environment for the running process. Unlike buildah
config --env, the environment will not persist to later calls to buildah run or to the built image. Can
be used multiple times.
--hostname
Set the hostname inside of the running container.
--ipc how
Sets the configuration for the IPC namespaces for the container. The configured value can be "" (the
empty string) or "private" to indicate that a new IPC namespace should be created, or it can be "host" to
indicate that the IPC namespace in which buildah itself is being run should be reused, or it can be the
path to an IPC namespace which is already in use by another process.
--isolation type
Controls what type of isolation is used for running the process. Recognized types include oci (OCI-
compatible runtime, the default), rootless (OCI-compatible runtime invoked using a modified
configuration, with --no-new-keyring added to its create invocation, reusing the host's network and UTS
namespaces, and creating private IPC, PID, mount, and user namespaces; the default for unprivileged
users), and chroot (an internal wrapper that leans more toward chroot(1) than container technology,
reusing the host's control group, network, IPC, and PID namespaces, and creating private mount and UTS
namespaces, and creating user namespaces only when they're required for ID mapping).
Note: You can also override the default isolation type by setting the BUILDAH_ISOLATION environment
variable. export BUILDAH_ISOLATION=oci
--mount=type=TYPE,TYPE-SPECIFIC-OPTION[,...]
Attach a filesystem mount to the container
Current supported mount TYPES are bind, cache, secret and tmpfs. Writes to bind and tmpfs mounts are
discarded after the command finishes, while changes to cache mounts persist across uses.
e.g.
type=bind,source=/path/on/host,destination=/path/in/container
type=tmpfs,tmpfs-size=512M,destination=/path/in/container
type=cache,target=/path/in/container
Common Options:
· src, source: mount source spec for bind and cache. Mandatory for bind. If `from` is specified, `src` is the subpath in the `from` field.
· dst, destination, target: location where the command being run should see the content being mounted.
· ro, read-only: (default true for `type=bind`, false for `type=tmpfs`, `type=cache`).
Options specific to bind:
· bind-propagation: shared, slave, private, rshared, rslave, or rprivate(default). See also mount(2). [[1]](#Footnote1)
. bind-nonrecursive: do not setup a recursive bind mount. By default it is recursive.
· from: image name for the root of the source. Defaults to **--contextdir**, mandatory if **--contextdir** was not specified.
· z: Set shared SELinux label on mounted destination. Use if SELinux is enabled on host machine.
· Z: Set private SELinux label on mounted destination. Use if SELinux is enabled on host machine.
Options specific to tmpfs:
· tmpfs-size: Size of the tmpfs mount in bytes. Unlimited by default in Linux.
· tmpfs-mode: File mode of the tmpfs in octal. (e.g. 700 or 0700.) Defaults to 1777 in Linux.
· tmpcopyup: Path that is shadowed by the tmpfs mount is recursively copied up to the tmpfs itself.
Options specific to secret:
· id: the identifier for the secret passed into the `buildah bud --secret` or `podman build --secret` command.
Options specific to cache:
· id: Distinguish this cache from other caches using this ID rather than the target mount path.
· mode: File mode for new cache directory in octal. Default 0755.
· ro, readonly: read only cache if set.
· uid: uid for cache directory.
· gid: gid for cache directory.
· from: stage name for the root of the source. Defaults to host cache directory.
· sharing: Whether other users of this cache need to wait for this command to complete (`sharing=locked`) or not (`sharing=shared`, which is the default).
· z: Set shared SELinux label on mounted destination. Enabled by default if SELinux is enabled on the host machine.
· Z: Set private SELinux label on mounted destination. Use if SELinux is enabled on host machine.
--network, --net=mode
Sets the configuration for the network namespace for the container.
Valid mode values are:
• none: no networking. Invalid if using --dns, --dns-opt, or --dns-search;
• host: use the host network stack. Note: the host mode gives the container full access to local
system services such as D-bus and is therefore considered insecure;
• ns:path: path to a network namespace to join;
• private: create a new namespace for the container (default)
• <network name|ID>: Join the network with the given name or ID, e.g. use --network mynet to join
the network with the name mynet. Only supported for rootful users.
• slirp4netns[:OPTIONS,...]: use slirp4netns(1) to create a user network stack. This is the
default for rootless containers. It is possible to specify these additional options, they can
also be set with network_cmd_options in containers.conf:
• allow_host_loopback=true|false: Allow slirp4netns to reach the host loopback IP (default is
10.0.2.2 or the second IP from slirp4netns cidr subnet when changed, see the cidr option
below). The default is false.
• mtu=MTU: Specify the MTU to use for this network. (Default is 65520).
• cidr=CIDR: Specify ip range to use for this network. (Default is 10.0.2.0/24).
• enable_ipv6=true|false: Enable IPv6. Default is true. (Required for outbound_addr6).
• outbound_addr=INTERFACE: Specify the outbound interface slirp binds to (ipv4 traffic only).
• outbound_addr=IPv4: Specify the outbound ipv4 address slirp binds to.
• outbound_addr6=INTERFACE: Specify the outbound interface slirp binds to (ipv6 traffic only).
• outbound_addr6=IPv6: Specify the outbound ipv6 address slirp binds to.
• pasta[:OPTIONS,...]: use pasta(1) to create a user-mode networking stack.
This is only supported in rootless mode.
By default, IPv4 and IPv6 addresses and routes, as well as the pod interface name, are copied
from the host. If port forwarding isn't configured, ports are forwarded dynamically as services
are bound on either side (init namespace or container namespace). Port forwarding preserves the
original source IP address. Options described in pasta(1) can be specified as comma-separated
arguments.
In terms of pasta(1) options, --config-net is given by default, in order to configure networking
when the container is started, and --no-map-gw is also assumed by default, to avoid direct
access from container to host using the gateway address. The latter can be overridden by passing
--map-gw in the pasta-specific options (despite not being an actual pasta(1) option).
Also, -t none and -u none are passed to disable automatic port forwarding based on bound ports.
Similarly, -T none and -U none are given to disable the same functionality from container to
host.
Some examples:
• pasta:--map-gw: Allow the container to directly reach the host using the gateway address.
• pasta:--mtu,1500: Specify a 1500 bytes MTU for the tap interface in the container.
• pasta:--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,-m,1500,--no-ndp,--no-
dhcpv6,--no-dhcp, equivalent to default slirp4netns(1) options: disable IPv6, assign
10.0.2.0/24 to the tap0 interface in the container, with gateway 10.0.2.3, enable DNS
forwarder reachable at 10.0.2.3, set MTU to 1500 bytes, disable NDP, DHCPv6 and DHCP support.
• pasta:-I,tap0,--ipv4-only,-a,10.0.2.0,-n,24,-g,10.0.2.2,--dns-forward,10.0.2.3,--no-ndp,--no-
dhcpv6,--no-dhcp, equivalent to default slirp4netns(1) options with Podman overrides: same as
above, but leave the MTU to 65520 bytes
• pasta:-t,auto,-u,auto,-T,auto,-U,auto: enable automatic port forwarding based on observed
bound ports from both host and container sides
• pasta:-T,5201: enable forwarding of TCP port 5201 from container to host, using the loopback
interface instead of the tap interface for improved performance
--no-hostname
Do not create the /etc/hostname file in the container for RUN instructions.
By default, Buildah manages the /etc/hostname file, adding the container's own hostname. When the --no-
hostname option is set, the image's /etc/hostname will be preserved unmodified if it exists.
--no-hosts
Do not create the /etc/hosts file in the container for RUN instructions.
By default, Buildah manages /etc/hosts, adding the container's own IP address. --no-hosts disables this,
and the image's /etc/hosts will be preserved unmodified.
--no-pivot
Do not use pivot root to jail process inside rootfs. This should be used whenever the rootfs is on top of
a ramdisk.
Note: You can make this option the default by setting the BUILDAH_NOPIVOT environment variable. export
BUILDAH_NOPIVOT=true
--pid how
Sets the configuration for the PID namespace for the container. The configured value can be "" (the
empty string) or "private" to indicate that a new PID namespace should be created, or it can be "host" to
indicate that the PID namespace in which buildah itself is being run should be reused, or it can be the
path to a PID namespace which is already in use by another process.
--runtime path
The path to an alternate OCI-compatible runtime. Default is runc, or crun when machine is configured to
use cgroups V2.
Note: You can also override the default runtime by setting the BUILDAH_RUNTIME environment variable.
export BUILDAH_RUNTIME=/usr/bin/crun
--runtime-flag flag
Adds global flags for the container runtime. To list the supported flags, please consult the manpages of
the selected container runtime. Note: Do not pass the leading -- to the flag. To pass the runc flag
--log-format json to buildah run, the option given would be --runtime-flag log-format=json.
--tty, --terminal, -t
By default a pseudo-TTY is allocated only when buildah's standard input is attached to a pseudo-TTY.
Setting the --tty option to true will cause a pseudo-TTY to be allocated inside the container connecting
the user's "terminal" with the stdin and stdout stream of the container. Setting the --tty option to
false will prevent the pseudo-TTY from being allocated.
--user user[:group]
Set the user to be used for running the command in the container. The user can be specified as a user
name or UID, optionally followed by a group name or GID, separated by a colon (':'). If names are used,
the container should include entries for those names in its /etc/passwd and /etc/group files.
--uts how
Sets the configuration for the UTS namespace for the container. The configured value can be "" (the
empty string) or "private" to indicate that a new UTS namespace should be created, or it can be "host" to
indicate that the UTS namespace in which buildah itself is being run should be reused, or it can be the
path to a UTS namespace which is already in use by another process.
--volume, -v source:destination:options
Create a bind mount. If you specify, -v /HOST-DIR:/CONTAINER-DIR, Buildah bind mounts /HOST-DIR in the
host to /CONTAINER-DIR in the Buildah container. The OPTIONS are a comma delimited list and can be:
• [rw|ro]
• [U]
• [z|Z]
• [[r]shared|[r]slave|[r]private] [1] ⟨#Footnote1⟩
The CONTAINER-DIR must be an absolute path such as /src/docs. The HOST-DIR must be an absolute path as
well. Buildah bind-mounts the HOST-DIR to the path you specify. For example, if you supply /foo as the
host path, Buildah copies the contents of /foo to the container filesystem on the host and bind mounts
that into the container.
You can specify multiple -v options to mount one or more mounts to a container.
Write Protected Volume Mounts
You can add the :ro or :rw suffix to a volume to mount it read-only or read-write mode, respectively. By
default, the volumes are mounted read-write. See examples.
Chowning Volume Mounts
By default, Buildah does not change the owner and group of source volume directories mounted into
containers. If a container is created in a new user namespace, the UID and GID in the container may
correspond to another UID and GID on the host.
The :U suffix tells Buildah to use the correct host UID and GID based on the UID and GID within the
container, to change the owner and group of the source volume.
Labeling Volume Mounts
Labeling systems like SELinux require that proper labels are placed on volume content mounted into a
container. Without a label, the security system might prevent the processes running inside the container
from using the content. By default, Buildah does not change the labels set by the OS.
To change a label in the container context, you can add either of two suffixes :z or :Z to the volume
mount. These suffixes tell Buildah to relabel file objects on the shared volumes. The z option tells
Buildah that two containers share the volume content. As a result, Buildah labels the content with a
shared content label. Shared volume labels allow all containers to read/write content. The Z option
tells Buildah to label the content with a private unshared label. Only the current container can use a
private volume.
By default bind mounted volumes are private. That means any mounts done inside container will not be
visible on the host and vice versa. This behavior can be changed by specifying a volume mount propagation
property.
When the mount propagation policy is set to shared, any mounts completed inside the container on that
volume will be visible to both the host and container. When the mount propagation policy is set to slave,
one way mount propagation is enabled and any mounts completed on the host for that volume will be visible
only inside of the container. To control the mount propagation property of the volume use the
:[r]shared, :[r]slave or :[r]private propagation flag. The propagation property can be specified only for
bind mounted volumes and not for internal volumes or named volumes. For mount propagation to work on the
source mount point (the mount point where source dir is mounted on) it has to have the right propagation
properties. For shared volumes, the source mount point has to be shared. And for slave volumes, the
source mount has to be either shared or slave. [1] ⟨#Footnote1⟩
Use df <source-dir> to determine the source mount and then use findmnt -o TARGET,PROPAGATION <source-
mount-dir> to determine propagation properties of source mount, if findmnt utility is not available, the
source mount point can be determined by looking at the mount entry in /proc/self/mountinfo. Look at
optional fields and see if any propagation properties are specified. shared:X means the mount is shared,
master:X means the mount is slave and if nothing is there that means the mount is private. [1]
⟨#Footnote1⟩
To change propagation properties of a mount point use the mount command. For example, to bind mount the
source directory /foo do mount --bind /foo /foo and mount --make-private --make-shared /foo. This will
convert /foo into a shared mount point. The propagation properties of the source mount can be changed
directly. For instance if / is the source mount for /foo, then use mount --make-shared / to convert /
into a shared mount.
--workingdir directory
Temporarily set the working directory for the running process. Unlike buildah config --workingdir, the
workingdir will not persist to later calls to buildah run or the built image.
NOTE: End parsing of options with the -- option, so that other options can be passed to the command
inside of the container.
EXAMPLE
buildah run containerID -- ps -auxw
buildah run --hostname myhost containerID -- ps -auxw
buildah run containerID -- sh -c 'echo $PATH'
buildah run --runtime-flag log-format=json containerID /bin/bash
buildah run --runtime-flag debug containerID /bin/bash
buildah run --tty containerID /bin/bash
buildah run --tty=false containerID ls /
buildah run --volume /path/on/host:/path/in/container:ro,z containerID sh
buildah run -v /path/on/host:/path/in/container:z,U containerID sh
buildah run --mount type=bind,src=/tmp/on:host,dst=/in:container,ro containerID sh
SEE ALSO
buildah(1), buildah-from(1), buildah-config(1), namespaces(7), pid_namespaces(7), crun(1), runc(8),
containers.conf(5)
FOOTNOTES
1: The Buildah project is committed to inclusivity, a core value of open source. The master and slave
mount propagation terminology used here is problematic and divisive, and should be changed. However,
these terms are currently used within the Linux kernel and must be used as-is at this time. When the
kernel maintainers rectify this usage, Buildah will follow suit immediately.
buildah March 2017 buildah-run(1)