Provided by: batmand_0.3.2-21_amd64 
NAME
batmand - better approach to mobile ad‐hoc networking
SYNOPSIS
batmand [options]interface[interface...]
DESCRIPTION
B.A.T.M.A.N means better approach to mobile ad‐hoc networking, this is a new routing protocol for multi‐
hop ad‐hoc mesh networks. Go to https://www.open-mesh.org/ to get more information.
The following document will explain how to use the batman daemon.
The batmand binary can be run in 2 different ways. First you need to start the daemon with "batmand
[options] interface" (daemon mode) and then you can connect to that daemon to issue further commands with
"batmand -c [options]" (client mode). Some of the options below are always available, some are not. See
the example section to get an idea.
OPTIONS
-a add announced network(s)
Add networks to the daemons list of available connections to another network(s). This option can
be used multiple times and can be used to add networks dynamically while the daemon is running.
The parameter has to be in the form of ip‐address/netmask.
-A delete announced network(s)
Delete networks to the daemons list of available connections to another network(s). This option
can be used multiple times and can only be used while the daemon is running. The parameter has to
be in the form of ip‐address/netmask.
-b run debug connection in batch mode
The debug information are updated after a period of time by default, so if you use "-b" it will
execute once and then stop. This option is useful for script integration of the debug output and
is only available in client mode together with "-d 1" or "-d 2".
-c connect via unix socket
Use this option to switch to client mode. Deploy it without any arguments to get the current
configuration even if changed at runtime.
-d debug level
The debug level can be set to five values.
default: 0 -> debug disabled
allowed values: 1 -> list neighbors
2 -> list gateways
3 -> observe batman
4 -> observe batman (verbose)
5 -> memory debug / cpu usage
Note that debug level 5 can be disabled at compile time.
-g gateway class
The gateway class is used to tell other nodes in the network your available internet bandwidth.
Just enter any number (optionally followed by "kbit" or "mbit") and the daemon will guess your
appropriate gateway class. Use "/" to separate the down‐ and upload rates. You can omit the upload
rate and batmand will assume an upload of download / 5.
default: 0 -> gateway disabled
allowed values: 5000
5000kbit
5mbit
5mbit/1024
5mbit/1024kbit
5mbit/1mbit
-h short help
-H verbose help
-o orginator interval in ms
A node transmits broadcast messages (we call them originator message or OGM) to inform the
neighboring nodes about it's existence. Originator interval is the time to wait after sending one
message and before sending the next message. The default value is 1000 ms (1 second). In a mobile
network, you may want to detect network changes very quickly, so you need to send message very
often, for example, use a value of 500 ms. In a static network, you can save bandwidth by using a
higher value. This option is only available in daemon mode.
-p preferred gateway
Set the internet gateway by yourself. Note: This automatically switches your daemon to "internet
search modus" with "-r 1" unless "-r" is given. If the preferred gateway is not found the gateway
selection will use the current routing class to choose a gateway.
-r routing class
The routing class can be set to four values ‐ it enables "internet search modus". The daemon will
choose an internet gateway based on certain criteria (unless "-p" is specified):
default: 0 -> set no default route
allowed values: 1 -> use fast connection
2 -> use stable connection
3 -> use fast‐switch connection
XX -> use late‐switch connection
In level 1, B.A.T.M.A.N tries to find the best available connection by watching the uplinks
throughput and the link quality. In level 2, B.A.T.M.A.N compares the link quality of the
internet node and chooses the one with the best link quality. In level 3, B.A.T.M.A.N compares
the link quality of the internet node and chooses the one with the best link quality but switches
to another gateway as soon as a better connection is found. In level XX (number between 3 and
256) B.A.T.M.A.N compares the link quality of the internet node and chooses the one with the best
link quality but switches to another gateway as soon as this gateway has a TQ value which is XX
better than the currently selected gateway.
-s visualization server
Since no topology database is computed by the protocol an additional solution to create topology
graphs has been implemented, the vis server. Batman daemons may send their local view about their
single‐hop neighbors to the vis server. It collects the information and provides data in a format
similar to OLSR's topology information output. Therefore existing solutions to draw topology
graphs developed for OLSR can be used to visualize mesh‐clouds using B.A.T.M.A.N.
-v print version
--disable-client-nat
Since version 0.3.2 batmand uses iptables to set the NAT rules on the gateX interface of the
batman client (-r XX). That option disables this feature of batmand and switches the internet
tunnel mode to "half tunnels" (the packets towards the gateway are tunneled but not the packets
that are coming back) unless NAT was enabled manually. Be sure to know what you are doing! Without
NAT the gateway needs to have a route to the client or the packets will be dropped silently.
--policy-routing-script
This option disables the policy routing feature of batmand ‐ all routing changes are send to the
script which can make use of this information or not. Firmware and package maintainers can use
this option to tightly integrate batmand into their own routing policies. This option is only
available in daemon mode.
EXAMPLES
batmand eth1 wlan0:test
Start batman daemon on interface "eth1" and on alias interface "wlan0:test"
batmand -o 2000 -a 192.168.100.1/32 -a 10.0.0.0/24 eth1
Start batman daemon on interface "eth1" with originator interval of 2000 ms while announcing
192.168.100.1 and 10.0.0.0/24.
batmand -s 192.168.1.1 -d 1 eth1
Start batman daemon on interface "eth1", sending topology information to 192.168.1.1 and with
debug level 1 (does not fork into the background).
batmand eth1 && batmand -c -d 1 -b
Start batman daemon on interface "eth1". Connect in client mode to get the debug level 1 output
once (batch mode).
batmand -g 2000kbit/500kbit eth1 && batmand -c -r 1
Start batman daemon on interface "eth1" as internet gateway. Connect in client mode to disable the
internet gateway and enable internet search mode.
AUTHOR
batmand was written by Marek Lindner <mareklindner-at-neomailbox.ch>, Axel Neumann
<axel-at-open-mesh.net>, Stefan Sperling <stsp-at-stsp.in-berlin.de>, Corinna 'Elektra' Aichele
<onelektra-at-gmx.net>, Thomas Lopatic <thomas-at-lopatic.de>, Felix Fietkau <nbd-at-nbd.name>, Ludger
Schmudde <lui-at-schmudde.com>, Simon Wunderlich <sw-at-simonwunderlich.de>, Andreas Langer
<an.langer-at-gmx.de>.
This manual page was written by Wesley Tsai <wesleyboy42@gmail.com>, for the Debian GNU/Linux system.
batmand(8)