Provided by: librpmem-dev_1.11.1-3build1_amd64 
NAME
librpmem - remote persistent memory support library (EXPERIMENTAL)
SYNOPSIS
#include <librpmem.h>
cc ... -lrpmem
Library API versioning:
const char *rpmem_check_version(
unsigned major_required,
unsigned minor_required);
Error handling:
const char *rpmem_errormsg(void);
Other library functions:
A description of other librpmem functions can be found on the following manual pages:
• rpmem_create(3), rpmem_persist(3)
DESCRIPTION
librpmem provides low-level support for remote access to persistent memory (pmem) utilizing RDMA-capable
RNICs. The library can be used to remotely replicate a memory region over the RDMA protocol. It uti‐
lizes an appropriate persistency mechanism based on the remote node's platform capabilities. librpmem
utilizes the ssh(1) client to authenticate a user on the remote node, and for encryption of the connec‐
tion's out-of-band configuration data. See SSH, below, for details.
The maximum replicated memory region size can not be bigger than the maximum locked-in-memory address
space limit. See memlock in limits.conf(5) for more details.
This library is for applications that use remote persistent memory directly, without the help of any li‐
brary-supplied transactions or memory allocation. Higher-level libraries that build on libpmem(7) are
available and are recommended for most applications, see:
• libpmemobj(7), a general use persistent memory API, providing memory allocation and transactional oper‐
ations on variable-sized objects.
TARGET NODE ADDRESS FORMAT
[<user>@]<hostname>[:<port>]
The target node address is described by the hostname which the client connects to, with an optional user
name. The user must be authorized to authenticate to the remote machine without querying for pass‐
word/passphrase. The optional port number is used to establish the SSH connection. The default port
number is 22.
REMOTE POOL ATTRIBUTES
The rpmem_pool_attr structure describes a remote pool and is stored in remote pool's metadata. This
structure must be passed to the rpmem_create(3) function by caller when creating a pool on remote node.
When opening the pool using rpmem_open(3) function the appropriate fields are read from pool's metadata
and returned back to the caller.
#define RPMEM_POOL_HDR_SIG_LEN 8
#define RPMEM_POOL_HDR_UUID_LEN 16
#define RPMEM_POOL_USER_FLAGS_LEN 16
struct rpmem_pool_attr {
char signature[RPMEM_POOL_HDR_SIG_LEN];
uint32_t major;
uint32_t compat_features;
uint32_t incompat_features;
uint32_t ro_compat_features;
unsigned char poolset_uuid[RPMEM_POOL_HDR_UUID_LEN];
unsigned char uuid[RPMEM_POOL_HDR_UUID_LEN];
unsigned char next_uuid[RPMEM_POOL_HDR_UUID_LEN];
unsigned char prev_uuid[RPMEM_POOL_HDR_UUID_LEN];
unsigned char user_flags[RPMEM_POOL_USER_FLAGS_LEN];
};
The signature field is an 8-byte field which describes the pool's on-media format.
The major field is a major version number of the pool's on-media format.
The compat_features field is a mask describing compatibility of pool's on-media format optional features.
The incompat_features field is a mask describing compatibility of pool's on-media format required fea‐
tures.
The ro_compat_features field is a mask describing compatibility of pool's on-media format features. If
these features are not available, the pool shall be opened in read-only mode.
The poolset_uuid field is an UUID of the pool which the remote pool is associated with.
The uuid field is an UUID of a first part of the remote pool. This field can be used to connect the re‐
mote pool with other pools in a list.
The next_uuid and prev_uuid fields are UUIDs of next and previous replicas respectively. These fields
can be used to connect the remote pool with other pools in a list.
The user_flags field is a 16-byte user-defined flags.
SSH
librpmem utilizes the ssh(1) client to login and execute the rpmemd(1) process on the remote node. By
default, ssh(1) is executed with the -4 option, which forces using IPv4 addressing.
For debugging purposes, both the ssh client and the commands executed on the remote node may be overrid‐
den by setting the RPMEM_SSH and RPMEM_CMD environment variables, respectively. See ENVIRONMENT for de‐
tails.
FORK
The ssh(1) client is executed by rpmem_open(3) and rpmem_create(3) after forking a child process using
fork(2). The application must take this into account when using wait(2) and waitpid(2), which may return
the PID of the ssh(1) process executed by librpmem.
If fork(2) support is not enabled in libibverbs, rpmem_open(3) and rpmem_create(3) will fail. By de‐
fault, fabric(7) initializes libibverbs with fork(2) support by calling the ibv_fork_init(3) function.
See fi_verbs(7) for more details.
CAVEATS
librpmem relies on the library destructor being called from the main thread. For this reason, all func‐
tions that might trigger destruction (e.g. dlclose(3)) should be called in the main thread. Otherwise
some of the resources associated with that thread might not be cleaned up properly.
librpmem registers a pool as a single memory region. A Chelsio T4 and T5 hardware can not handle a memo‐
ry region greater than or equal to 8GB due to a hardware bug. So pool_size value for rpmem_create(3) and
rpmem_open(3) using this hardware can not be greater than or equal to 8GB.
LIBRARY API VERSIONING
This section describes how the library API is versioned, allowing applications to work with an evolving
API.
The rpmem_check_version() function is used to see if the installed librpmem supports the version of the
library API required by an application. The easiest way to do this is for the application to supply the
compile-time version information, supplied by defines in <librpmem.h>, like this:
reason = rpmem_check_version(RPMEM_MAJOR_VERSION,
RPMEM_MINOR_VERSION);
if (reason != NULL) {
/* version check failed, reason string tells you why */
}
Any mismatch in the major version number is considered a failure, but a library with a newer minor ver‐
sion number will pass this check since increasing minor versions imply backwards compatibility.
An application can also check specifically for the existence of an interface by checking for the version
where that interface was introduced. These versions are documented in this man page as follows: unless
otherwise specified, all interfaces described here are available in version 1.0 of the library. Inter‐
faces added after version 1.0 will contain the text introduced in version x.y in the section of this man‐
ual describing the feature.
When the version check performed by rpmem_check_version() is successful, the return value is NULL. Oth‐
erwise the return value is a static string describing the reason for failing the version check. The
string returned by rpmem_check_version() must not be modified or freed.
ENVIRONMENT
librpmem can change its default behavior based on the following environment variables. These are largely
intended for testing and are not normally required.
• RPMEM_SSH=ssh_client
Setting this environment variable overrides the default ssh(1) client command name.
• RPMEM_CMD=cmd
Setting this environment variable overrides the default command executed on the remote node using either
ssh(1) or the alternative remote shell command specified by RPMEM_SSH.
RPMEM_CMD can contain multiple commands separated by a vertical bar (|). Each consecutive command is ex‐
ecuted on the remote node in order read from a pool set file. This environment variable is read when the
library is initialized, so RPMEM_CMD must be set prior to application launch (or prior to dlopen(3) if
librpmem is being dynamically loaded).
• RPMEM_ENABLE_SOCKETS=0|1
Setting this variable to 1 enables using fi_sockets(7) provider for in-band RDMA connection. The sockets
provider does not support IPv6. It is required to disable IPv6 system wide if RPMEM_ENABLE_SOCKETS == 1
and target == localhost (or any other loopback interface address) and SSH_CONNECTION variable (see ssh(1)
for more details) contains IPv6 address after ssh to loopback interface. By default the sockets provider
is disabled.
• RPMEM_ENABLE_VERBS=0|1
Setting this variable to 0 disables using fi_verbs(7) provider for in-band RDMA connection. The verbs
provider is enabled by default.
• RPMEM_MAX_NLANES=num
Limit the maximum number of lanes to num. See LANES, in rpmem_create(3), for details.
• RPMEM_WORK_QUEUE_SIZE=size
Suggest the work queue size. The effective work queue size can be greater than suggested if librpmem re‐
quires it or it can be smaller if underlying hardware does not support the suggested size. The work
queue size affects the performance of communication to the remote node. rpmem_flush(3) operations can be
added to the work queue up to the size of this queue. When work queue is full any subsequent call has to
wait till the work queue will be drained. rpmem_drain(3) and rpmem_persist(3) among other things also
drain the work queue.
DEBUGGING AND ERROR HANDLING
If an error is detected during the call to a librpmem function, the application may retrieve an error
message describing the reason for the failure from rpmem_errormsg(). This function returns a pointer to
a static buffer containing the last error message logged for the current thread. If errno was set, the
error message may include a description of the corresponding error code as returned by strerror(3). The
error message buffer is thread-local; errors encountered in one thread do not affect its value in other
threads. The buffer is never cleared by any library function; its content is significant only when the
return value of the immediately preceding call to a librpmem function indicated an error, or if errno was
set. The application must not modify or free the error message string, but it may be modified by subse‐
quent calls to other library functions.
Two versions of librpmem are typically available on a development system. The normal version, accessed
when a program is linked using the -lrpmem option, is optimized for performance. That version skips
checks that impact performance and never logs any trace information or performs any run-time assertions.
A second version of librpmem, accessed when a program uses the libraries under /usr/lib/pmdk_debug, con‐
tains run-time assertions and trace points. The typical way to access the debug version is to set the
environment variable LD_LIBRARY_PATH to /usr/lib/pmdk_debug or /usr/lib64/pmdk_debug, as appropriate.
Debugging output is controlled using the following environment variables. These variables have no effect
on the non-debug version of the library.
NOTE: On Debian/Ubuntu systems, this extra debug version of the library is shipped in the respec‐
tive -debug Debian package and placed in the /usr/lib/$ARCH/pmdk_dbg/ directory.
• RPMEM_LOG_LEVEL
The value of RPMEM_LOG_LEVEL enables trace points in the debug version of the library, as follows:
• 0 - This is the default level when RPMEM_LOG_LEVEL is not set. No log messages are emitted at this
level.
• 1 - Additional details on any errors detected are logged (in addition to returning the errno-based er‐
rors as usual). The same information may be retrieved using rpmem_errormsg().
• 2 - A trace of basic operations is logged.
• 3 - Enables a very verbose amount of function call tracing in the library.
• 4 - Enables voluminous and fairly obscure tracing information that is likely only useful to the librp‐
mem developers.
Unless RPMEM_LOG_FILE is set, debugging output is written to stderr.
• RPMEM_LOG_FILE
Specifies the name of a file where all logging information should be written. If the last character in
the name is “-”, the PID of the current process will be appended to the file name when the log file is
created. If RPMEM_LOG_FILE is not set, logging output is written to stderr.
EXAMPLE
The following example uses librpmem to create a remote pool on given target node identified by given pool
set name. The associated local memory pool is zeroed and the data is made persistent on remote node.
Upon success the remote pool is closed.
#include <assert.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <librpmem.h>
#define POOL_SIGNATURE "MANPAGE"
#define POOL_SIZE (32 * 1024 * 1024)
#define NLANES 4
#define DATA_OFF 4096
#define DATA_SIZE (POOL_SIZE - DATA_OFF)
static void
parse_args(int argc, char *argv[], const char **target, const char **poolset)
{
if (argc < 3) {
fprintf(stderr, "usage:\t%s <target> <poolset>\n", argv[0]);
exit(1);
}
*target = argv[1];
*poolset = argv[2];
}
static void *
alloc_memory()
{
long pagesize = sysconf(_SC_PAGESIZE);
if (pagesize < 0) {
perror("sysconf");
exit(1);
}
/* allocate a page size aligned local memory pool */
void *mem;
int ret = posix_memalign(&mem, pagesize, POOL_SIZE);
if (ret) {
fprintf(stderr, "posix_memalign: %s\n", strerror(ret));
exit(1);
}
assert(mem != NULL);
return mem;
}
int
main(int argc, char *argv[])
{
const char *target, *poolset;
parse_args(argc, argv, &target, &poolset);
unsigned nlanes = NLANES;
void *pool = alloc_memory();
int ret;
/* fill pool_attributes */
struct rpmem_pool_attr pool_attr;
memset(&pool_attr, 0, sizeof(pool_attr));
strncpy(pool_attr.signature, POOL_SIGNATURE, RPMEM_POOL_HDR_SIG_LEN);
/* create a remote pool */
RPMEMpool *rpp = rpmem_create(target, poolset, pool, POOL_SIZE,
&nlanes, &pool_attr);
if (!rpp) {
fprintf(stderr, "rpmem_create: %s\n", rpmem_errormsg());
return 1;
}
/* store data on local pool */
memset(pool, 0, POOL_SIZE);
/* make local data persistent on remote node */
ret = rpmem_persist(rpp, DATA_OFF, DATA_SIZE, 0, 0);
if (ret) {
fprintf(stderr, "rpmem_persist: %s\n", rpmem_errormsg());
return 1;
}
/* close the remote pool */
ret = rpmem_close(rpp);
if (ret) {
fprintf(stderr, "rpmem_close: %s\n", rpmem_errormsg());
return 1;
}
free(pool);
return 0;
}
NOTE
The librpmem API is experimental and may be subject to change in the future. However, using the remote
replication in libpmemobj(7) is safe and backward compatibility will be preserved.
ACKNOWLEDGEMENTS
librpmem builds on the persistent memory programming model recommended by the SNIA NVM Programming Tech‐
nical Work Group: <https://snia.org/nvmp>
SEE ALSO
rpmemd(1), ssh(1), fork(2), dlclose(3), dlopen(3), ibv_fork_init(3), rpmem_create(3), rpmem_drain(3), rp‐
mem_flush(3), rpmem_open(3), rpmem_persist(3), strerror(3), limits.conf(5), fabric(7), fi_sockets(7),
fi_verbs(7), libpmem(7), libpmemblk(7), libpmemlog(7), libpmemobj(7) and <https://pmem.io>
PMDK - rpmem API version 1.3 2021-09-24 LIBRPMEM(7)