Provided by: libfabric-dev_1.11.0-3_amd64 
NAME
fabric - Fabric Interface Library
SYNOPSIS
#include <rdma/fabric.h>
Libfabric is a high-performance fabric software library designed to provide low-latency interfaces to
fabric hardware.
OVERVIEW
Libfabric provides 'process direct I/O' to application software communicating across fabric software and
hardware. Process direct I/O, historically referred to as RDMA, allows an application to directly access
network resources without operating system interventions. Data transfers can occur directly to and from
application memory.
There are two components to the libfabric software:
Fabric Providers
Conceptually, a fabric provider may be viewed as a local hardware NIC driver, though a provider is
not limited by this definition. The first component of libfabric is a general purpose framework
that is capable of handling different types of fabric hardware. All fabric hardware devices and
their software drivers are required to support this framework. Devices and the drivers that plug
into the libfabric framework are referred to as fabric providers, or simply providers. Provider
details may be found in fi_provider(7).
Fabric Interfaces
The second component is a set of communication operations. Libfabric defines several sets of com‐
munication functions that providers can support. It is not required that providers implement all
the interfaces that are defined; however, providers clearly indicate which interfaces they do sup‐
port.
FABRIC INTERFACES
The fabric interfaces are designed such that they are cohesive and not simply a union of disjoint inter‐
faces. The interfaces are logically divided into two groups: control interfaces and communication opera‐
tions. The control interfaces are a common set of operations that provide access to local communication
resources, such as address vectors and event queues. The communication operations expose particular mod‐
els of communication and fabric functionality, such as message queues, remote memory access, and atomic
operations. Communication operations are associated with fabric endpoints.
Applications will typically use the control interfaces to discover local capabilities and allocate neces‐
sary resources. They will then allocate and configure a communication endpoint to send and receive data,
or perform other types of data transfers, with remote endpoints.
CONTROL INTERFACES
The control interfaces APIs provide applications access to network resources. This involves listing all
the interfaces available, obtaining the capabilities of the interfaces and opening a provider.
fi_getinfo - Fabric Information
The fi_getinfo call is the base call used to discover and request fabric services offered by the
system. Applications can use this call to indicate the type of communication that they desire.
The results from fi_getinfo, fi_info, are used to reserve and configure fabric resources.
fi_getinfo returns a list of fi_info structures. Each structure references a single fabric provider, in‐
dicating the interfaces that the provider supports, along with a named set of resources. A fabric
provider may include multiple fi_info structures in the returned list.
fi_fabric - Fabric Domain
A fabric domain represents a collection of hardware and software resources that access a single
physical or virtual network. All network ports on a system that can communicate with each other
through the fabric belong to the same fabric domain. A fabric domain shares network addresses and
can span multiple providers. libfabric supports systems connected to multiple fabrics.
fi_domain - Access Domains
An access domain represents a single logical connection into a fabric. It may map to a single
physical or virtual NIC or a port. An access domain defines the boundary across which fabric re‐
sources may be associated. Each access domain belongs to a single fabric domain.
fi_endpoint - Fabric Endpoint
A fabric endpoint is a communication portal. An endpoint may be either active or passive. Pas‐
sive endpoints are used to listen for connection requests. Active endpoints can perform data
transfers. Endpoints are configured with specific communication capabilities and data transfer
interfaces.
fi_eq - Event Queue
Event queues, are used to collect and report the completion of asynchronous operations and events.
Event queues report events that are not directly associated with data transfer operations.
fi_cq - Completion Queue
Completion queues are high-performance event queues used to report the completion of data transfer
operations.
fi_cntr - Event Counters
Event counters are used to report the number of completed asynchronous operations. Event counters
are considered light-weight, in that a completion simply increments a counter, rather than placing
an entry into an event queue.
fi_mr - Memory Region
Memory regions describe application local memory buffers. In order for fabric resources to access
application memory, the application must first grant permission to the fabric provider by con‐
structing a memory region. Memory regions are required for specific types of data transfer opera‐
tions, such as RMA transfers (see below).
fi_av - Address Vector
Address vectors are used to map higher level addresses, such as IP addresses, which may be more
natural for an application to use, into fabric specific addresses. The use of address vectors al‐
lows providers to reduce the amount of memory required to maintain large address look-up tables,
and eliminate expensive address resolution and look-up methods during data transfer operations.
DATA TRANSFER INTERFACES
Fabric endpoints are associated with multiple data transfer interfaces. Each interface set is designed
to support a specific style of communication, with an endpoint allowing the different interfaces to be
used in conjunction. The following data transfer interfaces are defined by libfabric.
fi_msg - Message Queue
Message queues expose a simple, message-based FIFO queue interface to the application. Message
data transfers allow applications to send and receive data with message boundaries being main‐
tained.
fi_tagged - Tagged Message Queues
Tagged message lists expose send/receive data transfer operations built on the concept of tagged
messaging. The tagged message queue is conceptually similar to standard message queues, but with
the addition of 64-bit tags for each message. Sent messages are matched with receive buffers that
are tagged with a similar value.
fi_rma - Remote Memory Access
RMA transfers are one-sided operations that read or write data directly to a remote memory region.
Other than defining the appropriate memory region, RMA operations do not require interaction at
the target side for the data transfer to complete.
fi_atomic - Atomic
Atomic operations can perform one of several operations on a remote memory region. Atomic opera‐
tions include well-known functionality, such as atomic-add and compare-and-swap, plus several oth‐
er pre-defined calls. Unlike other data transfer interfaces, atomic operations are aware of the
data formatting at the target memory region.
LOGGING INTERFACE
Logging can be controlled using the FI_LOG_LEVEL, FI_LOG_PROV, and FI_LOG_SUBSYS environment variables.
FI_LOG_LEVEL
FI_LOG_LEVEL controls the amount of logging data that is output. The following log levels are de‐
fined.
- Warn Warn is the least verbose setting and is intended for reporting errors or warnings.
- Trace
Trace is more verbose and is meant to include non-detailed output helpful to tracing program exe‐
cution.
- Info Info is high traffic and meant for detailed output.
- Debug
Debug is high traffic and is likely to impact application performance. Debug output is only
available if the library has been compiled with debugging enabled.
FI_LOG_PROV
The FI_LOG_PROV environment variable enables or disables logging from specific providers.
Providers can be enabled by listing them in a comma separated fashion. If the list begins with
the '^' symbol, then the list will be negated. By default all providers are enabled.
Example: To enable logging from the psm and sockets provider: FI_LOG_PROV="psm,sockets"
Example: To enable logging from providers other than psm: FI_LOG_PROV="^psm"
FI_LOG_SUBSYS
The FI_LOG_SUBSYS environment variable enables or disables logging at the subsystem level. The
syntax for enabling or disabling subsystems is similar to that used for FI_LOG_PROV. The follow‐
ing subsystems are defined.
- core Provides output related to the core framework and its management of providers.
- fabric
Provides output specific to interactions associated with the fabric object.
- domain
Provides output specific to interactions associated with the domain object.
- ep_ctrl
Provides output specific to endpoint non-data transfer operations, such as CM operations.
- ep_data
Provides output specific to endpoint data transfer operations.
- av Provides output specific to address vector operations.
- cq Provides output specific to completion queue operations.
- eq Provides output specific to event queue operations.
- mr Provides output specific to memory registration.
PROVIDER INSTALLATION AND SELECTION
The libfabric build scripts will install all providers that are supported by the installation system.
Providers that are missing build prerequisites will be disabled. Installed providers will dynamically
check for necessary hardware on library initialization and respond appropriately to application queries.
Users can enable or disable available providers through build configuration options. See 'configure
--help' for details. In general, a specific provider can be controlled using the configure option '--en‐
able-'. For example, '--enable-udp' (or '--enable-udp=yes') will add the udp provider to the build. To
disable the provider, '--enable-udp=no' can be used.
Providers can also be enable or disabled at run time using the FI_PROVIDER environment variable. The
FI_PROVIDER variable is set to a comma separated list of providers to include. If the list begins with
the '^' symbol, then the list will be negated.
Example: To enable the udp and tcp providers only, set: FI_PROVIDER="udp,tcp"
The fi_info utility, which is included as part of the libfabric package, can be used to retrieve informa‐
tion about which providers are available in the system. Additionally, it can retrieve a list of all en‐
vironment variables that may be used to configure libfabric and each provider. See fi_info(1) for more
details.
ENVIRONMENT VARIABLE CONTROLS
Core features of libfabric and its providers may be configured by an administrator through the use of en‐
vironment variables. Man pages will usually describe the most commonly accessed variables, such as those
mentioned above. However, libfabric defines interfaces for publishing and obtaining environment vari‐
ables. These are targeted for providers, but allow applications and users to obtain the full list of
variables that may be set, along with a brief description of their use.
A full list of variables available may be obtained by running the fi_info application, with the -e or
--env command line option.
NOTES
Because libfabric is designed to provide applications direct access to fabric hardware, there are limits
on how libfabric resources may be used in conjunction with system calls. These limitations are notable
for developers who may be familiar programming to the sockets interface. Although limits are provider
specific, the following restrictions apply to many providers and should be adhered to by applications de‐
siring portability across providers.
fork Fabric resources are not guaranteed to be available by child processes. This includes objects,
such as endpoints and completion queues, as well as application controlled data buffers which have
been assigned to the network. For example, data buffers that have been registered with a fabric
domain may not be available in a child process because of copy on write restrictions.
ABI CHANGES
libfabric releases maintain compatibility with older releases, so that compiled applications can continue
to work as-is, and previously written applications will compile against newer versions of the library
without needing source code changes. The changes below describe ABI updates that have occurred and which
libfabric release corresponds to the changes.
Note that because most functions called by applications actually call static inline functions, which in
turn reference function pointers in order to call directly into providers, libfabric only exports a hand‐
ful of functions directly. ABI changes are limited to those functions, most notably the fi_getinfo call
and its returned attribute structures.
The ABI version is independent from the libfabric release version.
ABI 1.0
The initial libfabric release (1.0.0) also corresponds to ABI version 1.0. The 1.0 ABI was unchanged for
libfabric major.minor versions 1.0, 1.1, 1.2, 1.3, and 1.4.
ABI 1.1
A number of external data structures were appended starting with libfabric version 1.5. These changes
included adding the fields to the following data structures. The 1.1 ABI was exported by libfabric ver‐
sions 1.5 and 1.6.
fi_fabric_attr
Added api_version
fi_domain_attr
Added cntr_cnt, mr_iov_limit, caps, mode, auth_key, auth_key_size, max_err_data, and mr_cnt
fields. The mr_mode field was also changed from an enum to an integer flag field.
fi_ep_attr
Added auth_key_size and auth_key fields.
ABI 1.2
The 1.2 ABI version was exported by libfabric versions 1.7 and 1.8, and expanded the following structure.
fi_info
The fi_info structure was expanded to reference a new fabric object, fid_nic. When available, the
fid_nic references a new set of attributes related to network hardware details.
ABI 1.3
The 1.3 ABI is also the current ABI version. All libfabric releases starting at 1.9 export this ABI.
fi_domain_attr
Added tclass
fi_tx_attr
Added tclass
SEE ALSO
fi_info(1), fi_provider(7), fi_getinfo(3), fi_endpoint(3), fi_domain(3), fi_av(3), fi_eq(3), fi_cq(3),
fi_cntr(3), fi_mr(3)
AUTHORS
OpenFabrics.
Libfabric Programmer's Manual 2020-07-21 fabric(7)