Provided by: mutt_2.1.4-1ubuntu1.2_amd64 
NAME
muttrc - Configuration file for the Mutt Mail User Agent
DESCRIPTION
A mutt configuration file consists of a series of “commands”. Each line of the file may contain one or
more commands. When multiple commands are used, they must be separated by a semicolon (“;”).
The hash mark, or pound sign (“#”), is used as a “comment” character. You can use it to annotate your
initialization file. All text after the comment character to the end of the line is ignored.
Single quotes (“'”) and double quotes (“"”) can be used to quote strings which contain spaces or other
special characters. The difference between the two types of quotes is similar to that of many popular
shell programs, namely that a single quote is used to specify a literal string (one that is not
interpreted for shell variables or quoting with a backslash [see next paragraph]), while double quotes
indicate a string which should be evaluated. For example, backticks are evaluated inside of double
quotes, but not single quotes.
\ quotes the next character, just as in shells such as bash and zsh. For example, if want to put quotes
(“"”) inside of a string, you can use “\” to force the next character to be a literal instead of
interpreted character.
“\\” means to insert a literal “\” into the line. “\n” and “\r” have their usual C meanings of linefeed
and carriage-return, respectively.
A “\” at the end of a line can be used to split commands over multiple lines, provided that the split
points don't appear in the middle of command names.
It is also possible to substitute the output of a Unix command in an initialization file. This is
accomplished by enclosing the command in backticks (`command`).
UNIX environment variables can be accessed like the way it is done in shells like sh and bash: Prepend
the name of the variable by a dollar (“$”) sign.
COMMANDS
alias [-group name [...]] key address [, address [ ... ]]
unalias [ * | key ]
alias defines an alias key for the given addresses. Each address will be resolved into either an
email address (user@example.com) or a named email address (User Name <user@example.com>). The
address may be specified in either format, or in the format “user@example.com (User Name)”.
unalias removes the alias corresponding to the given key or all aliases when “*” is used as an
argument. The optional -group argument to alias causes the aliased address(es) to be added to the
named group.
group [-group name] [-rx EXPR [ ... ]] [-addr address [ ... ]]
ungroup [-group name ] [ * | [[-rx EXPR [ ... ]] [-addr address [ ... ]]]
group is used to directly add either addresses or regular expressions to the specified group or
groups. The different categories of arguments to the group command can be in any order. The flags
-rx and -addr specify what the following strings (that cannot begin with a hyphen) should be
interpreted as: either a regular expression or an email address, respectively. ungroup is used to
remove addresses or regular expressions from the specified group or groups. The syntax is similar
to the group command, however the special character * can be used to empty a group of all of its
contents.
These address groups can also be created implicitly by the alias, lists, subscribe and alternates
commands by specifying the optional -group option.
Once defined, these address groups can be used in patterns to search for and limit the display to
messages matching a group.
alternates [-group name] regexp [ regexp [ ... ]]
unalternates [ * | regexp [ regexp [ ... ]] ]
alternates is used to inform mutt about alternate addresses where you receive mail; you can use
regular expressions to specify alternate addresses. This affects mutt's idea about messages from
you, and messages addressed to you. unalternates removes a regular expression from the list of
known alternates. The -group flag causes all of the subsequent regular expressions to be added to
the named group.
alternative_order type[/subtype] [ ... ]
unalternative_order [ * | type/subtype] [...]
alternative_order command permits you to define an order of preference which is used by mutt to
determine which part of a multipart/alternative body to display. A subtype of “*” matches any
subtype, as does an empty subtype. unalternative_order removes entries from the ordered list or
deletes the entire list when “*” is used as an argument.
attachments [ + | - ]disposition mime-type
unattachments [ + | - ]disposition mime-type
attachments ?
unattachments *
attachments specifies what kinds of attachments are used for Mutt's attachment counting and
searching support.
disposition is the attachment's Content-Disposition type - either inline or attachment. You can
abbreviate this to I or A.
The first part of a message or multipart group, if inline, is counted separately than other inline
parts. Specify root or R for disposition to count these as attachments. If this first part is of
type multipart/alternative, note that its top-level inline parts are also counted via root
disposition (if $count_alternatives is set).
disposition is prefixed by either a + symbol or a - symbol. If it's a +, you're saying that you
want to allow this disposition and MIME type to qualify. If it's a -, you're saying that this
disposition and MIME type is an exception to previous + rules.
mime-type is the MIME type of the attachment you want the command to affect. A MIME type is always
of the format major/minor, where major describes the broad category of document you're looking at,
and minor describes the specific type within that category. The major part of mime-type must be
literal text (or the special token *), but the minor part may be a regular expression. (Therefore,
*/.* matches any MIME type.)
The MIME types you give to the attachments directive are a kind of pattern. When you use the
attachments directive, the patterns you specify are added to a list. When you use unattachments,
the pattern is removed from the list. The patterns are not expanded and matched to specific MIME
types at this time - they're just text in a list. They're only matched when actually evaluating a
message.
auto_view type[/subtype] [ ... ]
unauto_view type[/subtype] [ ... ]
This commands permits you to specify that mutt should automatically convert the given MIME types
to text/plain when displaying messages. For this to work, there must be a mailcap(5) entry for
the given MIME type with the copiousoutput flag set. A subtype of “*” matches any subtype, as
does an empty subtype.
mime_lookup type[/subtype] [ ... ]
unmime_lookup type[/subtype] [ ... ]
This command permits you to define a list of "data" MIME content types for which mutt will try to
determine the actual file type from the file name, and not use a mailcap(5) entry given for the
original MIME type. For instance, you may add the application/octet-stream MIME type to this
list.
bind map1,map2,... key function
This command binds the given key for the given map or maps to the given function. Multiple maps
may be specified by separating them with commas (no whitespace is allowed).
Valid maps are: generic, alias, attach, browser, editor, index, compose, pager, pgp, postpone,
mix.
For more information on keys and functions, please consult the Mutt Manual. Note that the function
name is to be specified without angle brackets.
account-hook [!]regexp command
This hook is executed whenever you access a remote mailbox. Useful to adjust configuration
settings to different IMAP or POP servers.
charset-hook alias charset
This command defines an alias for a character set. This is useful to properly display messages
which are tagged with a character set name not known to mutt.
iconv-hook charset local-charset
This command defines a system-specific name for a character set. This is useful when your
system's iconv(3) implementation does not understand MIME character set names (such as
iso-8859-1), but instead insists on being fed with implementation-specific character set names
(such as 8859-1). In this specific case, you'd put this into your configuration file:
iconv-hook iso-8859-1 8859-1
message-hook [!]pattern command
Before mutt displays (or formats for replying or forwarding) a message which matches the given
pattern (or, when it is preceded by an exclamation mark, does not match the pattern), the given
command is executed. When multiple message-hooks match, they are executed in the order in
which they occur in the configuration file.
folder-hook [!]regexp command
When mutt enters a folder which matches regexp (or, when regexp is preceded by an exclamation
mark, does not match regexp), the given command is executed.
When several folder-hooks match a given mail folder, they are executed in the order given in the
configuration file.
macro map key sequence [ description ]
This command binds the given sequence of keys to the given key in the given map or maps. For
valid maps, see bind. To specify multiple maps, put only a comma between the maps.
color object [ attribute ... ] foreground background [ regexp ]
color index [ attribute ... ] foreground background [ pattern ]
color compose composeobject [ attribute ... ] foreground background
uncolor index pattern [ pattern ... ]
If your terminal supports color, these commands can be used to assign foreground/background
combinations to certain objects. Valid objects are: attachment, body, bold, error, header,
hdrdefault, index, indicator, markers, message, normal, prompt, quoted, quotedN, search,
signature, status, tilde, tree, underline. If the sidebar is enabled the following objects are
also valid: sidebar_divider, sidebar_flagged, sidebar_highlight, sidebar_indicator, sidebar_new,
sidebar_spoolfile. The body and header objects allow you to restrict the colorization to a
regular expression. The index object permits you to select colored messages by pattern.
Valid composeobjects include header, security_encrypt, security_sign, security_both,
security_none.
Valid colors include: white, black, green, magenta, blue, cyan, yellow, red, default, colorN.
Valid attributes include: none, bold, underline, reverse, and standout.
mono object attribute [ regexp ]
mono index attribute [ pattern ]
For terminals which don't support color, you can still assign attributes to objects.
[un]ignore pattern [ pattern ... ]
The ignore command permits you to specify header fields which you usually don't wish to see. Any
header field whose tag begins with an “ignored” pattern will be ignored.
The unignore command permits you to define exceptions from the above mentioned list of ignored
headers.
lists [-group name] regexp [ regexp ... ]
unlists regexp [ regexp ... ]
subscribe [-group name] regexp [ regexp ... ]
unsubscribe regexp [ regexp ... ]
Mutt maintains two lists of mailing list address patterns, a list of subscribed mailing lists, and
a list of known mailing lists. All subscribed mailing lists are known. Patterns use regular
expressions.
The lists command adds a mailing list address to the list of known mailing lists. The unlists
command removes a mailing list from the lists of known and subscribed mailing lists. The
subscribe command adds a mailing list to the lists of known and subscribed mailing lists. The
unsubscribe command removes it from the list of subscribed mailing lists. The -group flag adds all
of the subsequent regular expressions to the named group.
mbox-hook [!]regexp mailbox
When mutt changes to a mail folder which matches regexp, mailbox will be used as the “mbox”
folder, i.e., read messages will be moved to that folder when the mail folder is left.
The first matching mbox-hook applies.
mailboxes [[-notify | -nonotify]
[-poll | -nopoll]
[[-label label] | -nolabel]
filename] [ ... ]
unmailboxes [ * | filename ... ]
The mailboxes specifies folders which can receive mail and which will be checked for new messages.
When changing folders, pressing space will cycle through folders with new mail. The unmailboxes
command is used to remove a file name from the list of folders which can receive mail. If "*" is
specified as the file name, the list is emptied.
my_hdr string
unmy_hdr field
Using my_hdr, you can define headers which will be added to the messages you compose. unmy_hdr
will remove the given user-defined headers.
hdr_order header1 header2 [ ... ]
With this command, you can specify an order in which mutt will attempt to present headers to you
when viewing messages.
save-hook [!]pattern filename
When a message matches pattern, the default file name when saving it will be the given filename.
fcc-hook [!]pattern filename
When an outgoing message matches pattern, the default file name for storing a copy (fcc) will be
the given filename.
fcc-save-hook [!]pattern filename
This command is an abbreviation for identical fcc-hook and save-hook commands.
send-hook [!]pattern command
When composing a message matching pattern, command is executed. When multiple send-hooks match,
they are executed in the order in which they occur in the configuration file.
send2-hook [!]pattern command
Whenever a message matching pattern is changed (either by editing it or by using the compose
menu), command is executed. When multiple send2-hooks match, they are executed in the order in
which they occur in the configuration file. Possible applications include setting the $sendmail
variable when a message's from header is changed.
send2-hook execution is not triggered by use of enter-command from the compose menu.
reply-hook [!]pattern command
When replying to a message matching pattern, command is executed. When multiple reply-hooks
match, they are executed in the order in which they occur in the configuration file, but all
reply-hooks are matched and executed before send-hooks, regardless of their order in the
configuration file.
crypt-hook regexp key-id
The crypt-hook command provides a method by which you can specify the ID of the public key to be
used when encrypting messages to a certain recipient. The meaning of "key ID" is to be taken
broadly: This can be a different e-mail address, a numerical key ID, or even just an arbitrary
search string. You may use multiple crypt-hooks with the same regexp; multiple matching crypt-
hooks result in the use of multiple key-ids for a recipient.
index-format-hook name [!]pattern format-string
This command is used to inject format strings dynamically into $index_format based on pattern
matching against the current message.
The $index_format expando %@name@ specifies a placeholder for the injection. Index-format-hooks
with the same name are matched using pattern against the current message. Matching is done in the
order specified in the .muttrc, with the first match being used. The hook's format-string is then
substituted and evaluated.
open-hook regexp "command"
close-hook regexp "command"
append-hook regexp "command"
These commands provide a way to handle compressed folders. The given regexp specifies which
folders are taken as compressed (e.g. "\\.gz$"). The commands tell Mutt how to uncompress a
folder (open-hook), compress a folder (close-hook) or append a compressed mail to a compressed
folder (append-hook). The command string is the printf(3) like format string, and it should accept
two parameters: %f, which is replaced with the (compressed) folder name, and %t which is replaced
with the name of the temporary folder to which to write.
push string
exec function [ ... ]
push adds the named string to the keyboard buffer. “exec function” is equivalent to “push
<function>”.
run MuttLisp
The run command evaluates the MuttLisp argument. The output of the MuttLisp is then executed as a
Mutt command, as if it were typed in the muttrc instead.
score pattern value
unscore [ * | pattern ... ]
The score commands adds value to a message's score if pattern matches it. The unscore command
removes score entries from the list.
set [no|inv|&|?]variable[=value] [ ... ]
toggle variable [ ... ]
unset variable [ ... ]
reset variable [ ... ]
These commands are used to set and manipulate configuration variables.
Mutt knows four basic types of variables: boolean, number, string and quadoption. Boolean
variables can be set (true), unset (false), or toggled. Number variables can be assigned a
positive integer value.
String variables consist of any number of printable characters. Strings must be enclosed in
quotes if they contain spaces or tabs. You may also use the “C” escape sequences \n and \t for
newline and tab, respectively.
Quadoption variables are used to control whether or not to be prompted for certain actions, or to
specify a default action. A value of yes will cause the action to be carried out automatically as
if you had answered yes to the question. Similarly, a value of no will cause the action to be
carried out as if you had answered “no.” A value of ask-yes will cause a prompt with a default
answer of “yes” and ask-no will provide a default answer of “no.”
The reset command resets all given variables to the compile time defaults. If you reset the
special variable all, all variables will reset to their compile time defaults.
setenv [?]variable [ value ]
unsetenv variable
These alter the environment that Mutt passes on to its child processes. You can also query
current environment values by prefixing a “?” character.
sidebar_whitelist mailbox [ mailbox ...]
unsidebar_whitelist [ * | mailbox ... ]
sidebar_whitelist specifies mailboxes that will always be displayed in the sidebar, even if
$sidebar_new_mail_only is set and the mailbox does not contain new mail.
unsidebar_whitelist is used to remove a mailbox from the list of whitelisted mailboxes. Use
unsidebar_whitelist * to remove all mailboxes.
source filename
The given file will be evaluated as a configuration file.
spam pattern format
nospam pattern
These commands define spam-detection patterns from external spam filters, so that mutt can sort,
limit, and search on ``spam tags'' or ``spam attributes'', or display them in the index. See the
Mutt manual for details.
subjectrx pattern replacement
unsubjectrx [ * | pattern ]
subjectrx specifies a regular expression pattern which, if detected in a message subject, causes
the subject to be replaced with the replacement value. The replacement is subject to substitutions
in the same way as for the spam command: %L for the text to the left of the match, %R for text to
the right of the match, and %1 for the first subgroup in the match (etc). If you simply want to
erase the match, set it to “%L%R”. Any number of subjectrx commands may coexist.
Note this well: the replacement value replaces the entire subject, not just the match!
unsubjectrx removes a given subjectrx from the substitution list. If * is used as the pattern, all
substitutions will be removed.
unhook [ * | hook-type ]
This command will remove all hooks of a given type, or all hooks when “*” is used as an argument.
hook-type can be any of the -hook commands documented above.
mailto_allow header-field [ ... ]
unmailto_allow [ * | header-field ... ]
These commands allow the user to modify the list of allowed header fields in a mailto: URL that
Mutt will include in the the generated message. By default the list contains only subject and
body, as specified by RFC2368.
echo message
Prints message to the message window. After printing the message, echo will pause for the number
of seconds specified by $sleep_time.
cd directory
Changes the current working directory.
PATTERNS
In various places with mutt, including some of the above mentioned hook commands, you can specify
patterns to match messages.
Constructing Patterns
A simple pattern consists of a modifier of the form “~character”, possibly followed by a parameter
against which mutt is supposed to match the object specified by this modifier. For some characters, the
~ may be replaced by another character to alter the behavior of the match. These are described in the
list of modifiers, below.
With some of these modifiers, the object to be matched consists of several e-mail addresses. In these
cases, the object is matched if at least one of these e-mail addresses matches. You can prepend a hat
(“^”) character to such a pattern to indicate that all addresses must match in order to match the object.
You can construct complex patterns by combining simple patterns with logical operators. Logical AND is
specified by simply concatenating two simple patterns, for instance “~C mutt-dev ~s bug”. Logical OR is
specified by inserting a vertical bar (“|”) between two patterns, for instance “~C mutt-dev | ~s bug”.
Additionally, you can negate a pattern by prepending a bang (“!”) character. For logical grouping, use
braces (“()”). Example: “!(~t mutt|~c mutt) ~f elkins”.
Simple Patterns
Mutt understands the following simple patterns:
~A all messages
~b EXPR messages which contain EXPR in the message body.
=b STRING If IMAP is enabled, like ~b but searches for STRING on the server, rather than downloading
each message and searching it locally.
~B EXPR messages which contain EXPR in the whole message.
=B STRING If IMAP is enabled, like ~B but searches for STRING on the server, rather than downloading
each message and searching it locally.
~c EXPR messages carbon-copied to EXPR
%c GROUP messages carbon-copied to any member of GROUP
~C EXPR messages either to: or cc: EXPR
%C GROUP messages either to: or cc: to any member of GROUP
~d MIN-MAX messages with “date-sent” in a Date range
~D deleted messages
~e EXPR messages which contain EXPR in the “Sender” field
%e GROUP messages which contain a member of GROUP in the “Sender” field
~E expired messages
~f EXPR messages originating from EXPR
%f GROUP messages originating from any member of GROUP
~F flagged messages
~g PGP signed messages
~G PGP encrypted messages
~h EXPR messages which contain EXPR in the message header
=h STRING If IMAP is enabled, like ~h but searches for STRING on the server, rather than downloading
each message and searching it locally. STRING must be of the form “header: substring”
~H EXPR messages with spam tags matching EXPR
~i EXPR messages which match EXPR in the “Message-ID” field
~k messages containing PGP key material
~l messages addressed to a known mailing list (defined by either subscribe or list)
~L EXPR messages either originated or received by EXPR
%L GROUP messages either originated or received by any member of GROUP
~m MIN-MAX message in the range MIN to MAX
~M EXPR messages which contain a mime Content-Type matching EXPR
~n MIN-MAX messages with a score in the range MIN to MAX
~N new messages
~O old messages
~p messages addressed to you (consults $from, alternates, and local account/hostname
information)
~P messages from you (consults $from, alternates, and local account/hostname information)
~Q messages which have been replied to
~r MIN-MAX messages with “date-received” in a Date range
~R read messages
~s EXPR messages having EXPR in the “Subject” field.
~S superseded messages
~t EXPR messages addressed to EXPR
~T tagged messages
~u messages addressed to a subscribed mailing list (defined by subscribe commands)
~U unread messages
~v message is part of a collapsed thread.
~V cryptographically verified messages
~x EXPR messages which contain EXPR in the “References” or “In-Reply-To” field
~X MIN-MAX messages with MIN - MAX attachments
~y EXPR messages which contain EXPR in the “X-Label” field
~z MIN-MAX messages with a size in the range MIN to MAX
~= duplicated messages (see $duplicate_threads)
~$ unreferenced message (requires threaded view)
~(PATTERN) messages in threads containing messages matching a certain pattern, e.g. all threads
containing messages from you: ~(~P)
~<(PATTERN) messages whose immediate parent matches PATTERN, e.g. replies to your messages: ~<(~P)
~>(PATTERN) messages having an immediate child matching PATTERN, e.g. messages you replied to: ~>(~P)
In the above, EXPR is a regular expression.
With the ~d, ~m, ~n, ~r, ~X, and ~z modifiers, you can also specify ranges in the forms <MAX, >MIN, MIN-,
and -MAX.
With the ~z modifier, the suffixes “K” and “M” are allowed to specify kilobyte and megabyte respectively.
The ~b, ~B, ~h, ~M, and ~X modifiers require reading each message in, which can be much slower.
You can force Mutt to treat EXPR as a simple string instead of a regular expression by using = instead of
~ in the pattern name.
Matching dates
The ~d and ~r modifiers are used to match date ranges, which are interpreted to be given in your local
time zone.
A date is of the form DD[/MM[/[cc]YY]], that is, a two-digit date, optionally followed by a two-digit
month, optionally followed by a year specifications. Omitted fields default to the current month and
year.
Mutt understands either two or four digit year specifications. When given a two-digit year, mutt will
interpret values less than 70 as lying in the 21st century (i.e., “38” means 2038 and not 1938, and “00”
is interpreted as 2000), and values greater than or equal to 70 as lying in the 20th century.
Note that this behavior is Y2K compliant, but that mutt does have a Y2.07K problem.
Alternatively, you may use YYYYMMDD to specify a date.
If a date range consists of a single date, the modifier in question will match that precise date. If the
date range consists of a dash (“-”), followed by a date, this range will match any date before and up to
the date given. Similarly, a date followed by a dash matches the date given and any later point of time.
Two dates, separated by a dash, match any date which lies in the given range of time.
You can also modify any absolute date by giving an error range. An error range consists of one of the
characters +, -, *, followed by a positive number, followed by one of the unit characters y, m, w, or d,
specifying a unit of years, months, weeks, or days. + increases the maximum date matched by the given
interval of time, - decreases the minimum date matched by the given interval of time, and * increases the
maximum date and decreases the minimum date matched by the given interval of time. It is possible to
give multiple error margins, which cumulate. Example: 1/1/2001-1w+2w*3d
You can also specify offsets relative to the current date. An offset is specified as one of the
characters <, >, =, followed by a positive number, followed by one of the unit characters y, m, w, d, H,
M, or S. > matches dates which are older than the specified amount of time, an offset which begins with
the character < matches dates which are more recent than the specified amount of time, and an offset
which begins with the character = matches points of time which are precisely the given amount of time
ago.
CONFIGURATION VARIABLES
abort_noattach
Type: quadoption
Default: no
When the body of the message matches $abort_noattach_regexp and there are no attachments, this
quadoption controls whether to abort sending the message.
abort_noattach_regexp
Type: regular expression
Default: “attach”
Specifies a regular expression to match against the body of the message, to determine if an
attachment was mentioned but mistakenly forgotten. If it matches, $abort_noattach will be
consulted to determine if message sending will be aborted.
Like other regular expressions in Mutt, the search is case sensitive if the pattern contains at
least one upper case letter, and case insensitive otherwise.
abort_nosubject
Type: quadoption
Default: ask-yes
If set to yes, when composing messages and no subject is given at the subject prompt, composition
will be aborted. If set to no, composing messages with no subject given at the subject prompt
will never be aborted.
abort_unmodified
Type: quadoption
Default: yes
If set to yes, composition will automatically abort after editing the message body if no changes
are made to the file (this check only happens after the first edit of the file). When set to no,
composition will never be aborted.
alias_file
Type: path
Default: “~/.muttrc”
The default file in which to save aliases created by the <create-alias> function. Entries added to
this file are encoded in the character set specified by $config_charset if it is set or the
current character set otherwise.
Note: Mutt will not automatically source this file; you must explicitly use the “source” command
for it to be executed in case this option points to a dedicated alias file.
The default for this option is the currently used muttrc file, or “~/.muttrc” if no user muttrc
was found.
alias_format
Type: string
Default: “%4n %2f %t %-10a %r”
Specifies the format of the data displayed for the “alias” menu. The following printf(3)-style
sequences are available:
%a alias name
%f flags - currently, a “d” for an alias marked for deletion
%n index number
%r address which alias expands to
%t character which indicates if the alias is tagged for inclusion
allow_8bit
Type: boolean
Default: yes
Controls whether 8-bit data is converted to 7-bit using either Quoted- Printable or Base64
encoding when sending mail.
allow_ansi
Type: boolean
Default: no
Controls whether ANSI color codes in messages (and color tags in rich text messages) are to be
interpreted. Messages containing these codes are rare, but if this option is set, their text will
be colored accordingly. Note that this may override your color choices, and even present a
security problem, since a message could include a line like
[-- PGP output follows ...
and give it the same color as your attachment color (see also $crypt_timestamp).
arrow_cursor
Type: boolean
Default: no
When set, an arrow (“->”) will be used to indicate the current entry in menus instead of
highlighting the whole line. On slow network or modem links this will make response faster
because there is less that has to be redrawn on the screen when moving to the next or previous
entries in the menu.
ascii_chars
Type: boolean
Default: no
If set, Mutt will use plain ASCII characters when displaying thread and attachment trees, instead
of the default ACS characters.
askbcc
Type: boolean
Default: no
If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients before editing an outgoing
message.
askcc
Type: boolean
Default: no
If set, Mutt will prompt you for carbon-copy (Cc) recipients before editing the body of an
outgoing message.
assumed_charset
Type: string
Default: “”
This variable is a colon-separated list of character encoding schemes for messages without
character encoding indication. Header field values and message body content without character
encoding indication would be assumed that they are written in one of this list. By default, all
the header fields and message body without any charset indication are assumed to be in “us-ascii”.
For example, Japanese users might prefer this:
set assumed_charset=”iso-2022-jp:euc-jp:shift_jis:utf-8”
However, only the first content is valid for the message body.
attach_charset
Type: string
Default: “”
This variable is a colon-separated list of character encoding schemes for text file attachments.
Mutt uses this setting to guess which encoding files being attached are encoded in to convert them
to a proper character set given in $send_charset.
If unset, the value of $charset will be used instead. For example, the following configuration
would work for Japanese text handling:
set attach_charset=”iso-2022-jp:euc-jp:shift_jis:utf-8”
Note: for Japanese users, “iso-2022-*” must be put at the head of the value as shown above if
included.
attach_format
Type: string
Default: “%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] ”
This variable describes the format of the “attachment” menu. The following printf(3)-style
sequences are understood:
%C charset
%c requires charset conversion (“n” or “c”)
%D deleted flag
%d description (if none, falls back to %F)
%e MIME content-transfer-encoding
%F filename in content-disposition header (if none, falls back to %f)
%f filename
%I disposition (“I” for inline, “A” for attachment)
%m major MIME type
%M MIME subtype
%n attachment number
%Q “Q”, if MIME part qualifies for attachment counting
%s size (see formatstrings-size)
%t tagged flag
%T graphic tree characters
%u unlink (=to delete) flag
%X number of qualifying MIME parts in this part and its children (please see the “attachments”
section for possible speed effects)
%>X right justify the rest of the string and pad with character “X”
%|X pad to the end of the line with character “X”
%*X soft-fill with character “X” as pad
For an explanation of “soft-fill”, see the $index_format documentation.
attach_save_dir
Type: path
Default: “”
The default directory to save attachments from the “attachment” menu. If it doesn't exist, Mutt
will prompt to create the directory before saving.
If the path is invalid (e.g. not a directory, or cannot be chdir'ed to), Mutt will fall back to
using the current directory.
attach_sep
Type: string
Default: “\n”
The separator to add between attachments when operating (saving, printing, piping, etc) on a list
of tagged attachments.
attach_split
Type: boolean
Default: yes
If this variable is unset, when operating (saving, printing, piping, etc) on a list of tagged
attachments, Mutt will concatenate the attachments and will operate on them as a single
attachment. The $attach_sep separator is added after each attachment. When set, Mutt will operate
on the attachments one by one.
attribution
Type: string (localized)
Default: “On %d, %n wrote:”
This is the string that will precede a message which has been included in a reply. For a full
listing of defined printf(3)-like sequences see the section on $index_format.
attribution_locale
Type: string
Default: “”
The locale used by strftime(3) to format dates in the attribution string. Legal values are the
strings your system accepts for the locale environment variable $LC_TIME.
This variable is to allow the attribution date format to be customized by recipient or folder
using hooks. By default, Mutt will use your locale environment, so there is no need to set this
except to override that default.
auto_subscribe
Type: boolean
Default: no
When set, Mutt assumes the presence of a List-Post header means the recipient is subscribed to the
list. Unless the mailing list is in the “unsubscribe” or “unlist” lists, it will be added to the
“subscribe” list. Parsing and checking these things slows header reading down, so this option is
disabled by default.
auto_tag
Type: boolean
Default: no
When set, functions in the index menu which affect a message will be applied to all tagged
messages (if there are any). When unset, you must first use the <tag-prefix> function (bound to
“;” by default) to make the next function apply to all tagged messages.
autocrypt
Type: boolean
Default: no
When set, enables autocrypt, which provides passive encryption protection with keys exchanged via
headers. See “autocryptdoc” for more details. (Autocrypt only)
autocrypt_acct_format
Type: string
Default: “%4n %-30a %20p %10s”
This variable describes the format of the “autocrypt account” menu. The following printf(3)-style
sequences are understood
%a email address
%k gpg keyid
%n current entry number
%p prefer-encrypt flag
%s status flag (active/inactive)
(Autocrypt only)
autocrypt_dir
Type: path
Default: “~/.mutt/autocrypt”
This variable sets where autocrypt files are stored, including the GPG keyring and sqlite
database. See “autocryptdoc” for more details. (Autocrypt only)
autocrypt_reply
Type: boolean
Default: yes
When set, replying to an autocrypt email automatically enables autocrypt in the reply. You may
want to unset this if you're using the same key for autocrypt as normal web-of-trust, so that
autocrypt isn't forced on for all encrypted replies. (Autocrypt only)
autoedit
Type: boolean
Default: no
When set along with $edit_headers, Mutt will skip the initial send-menu (prompting for subject and
recipients) and allow you to immediately begin editing the body of your message. The send-menu
may still be accessed once you have finished editing the body of your message.
Note: when this option is set, you cannot use send-hooks that depend on the recipients when
composing a new (non-reply) message, as the initial list of recipients is empty.
Also see $fast_reply.
background_edit
Type: boolean
Default: no
When set, Mutt will run $editor in the background during message composition. A landing page will
display, waiting for the $editor to exit. The landing page may be exited, allowing perusal of the
mailbox, or even for other messages to be composed. Backgrounded sessions may be returned to via
the <background-compose-menu> function.
For background editing to work properly, $editor must be set to an editor that does not try to use
the Mutt terminal: for example a graphical editor, or a script launching (and waiting for) the
editor in another Gnu Screen window.
For more details, see “bgedit” (”Background Editing” in the manual).
background_confirm_quit
Type: boolean
Default: yes
When set, if there are any background edit sessions, you will be prompted to confirm exiting Mutt,
in addition to the $quit prompt.
background_format
Type: string
Default: “%10S %7p %s”
This variable describes the format of the “background compose” menu. The following
printf(3)-style sequences are understood:
%i parent message id (for replies and forwarded messages)
%n the running number on the menu
%p pid of the $editor process
%r comma separated list of “To:” recipients
%R comma separated list of “Cc:” recipients
%s subject of the message
%S status of the $editor process: running/finished
beep
Type: boolean
Default: yes
When this variable is set, mutt will beep when an error occurs.
beep_new
Type: boolean
Default: no
When this variable is set, mutt will beep whenever it prints a message notifying you of new mail.
This is independent of the setting of the $beep variable.
bounce
Type: quadoption
Default: ask-yes
Controls whether you will be asked to confirm bouncing messages. If set to yes you don't get
asked if you want to bounce a message. Setting this variable to no is not generally useful, and
thus not recommended, because you are unable to bounce messages.
bounce_delivered
Type: boolean
Default: yes
When this variable is set, mutt will include Delivered-To headers when bouncing messages. Postfix
users may wish to unset this variable.
braille_friendly
Type: boolean
Default: no
When this variable is set, mutt will place the cursor at the beginning of the current line in
menus, even when the $arrow_cursor variable is unset, making it easier for blind persons using
Braille displays to follow these menus. The option is unset by default because many visual
terminals don't permit making the cursor invisible.
browser_abbreviate_mailboxes
Type: boolean
Default: yes
When this variable is set, mutt will abbreviate mailbox names in the browser mailbox list, using
'~' and '=' shortcuts.
The default ”alpha” setting of $sort_browser uses locale-based sorting (using strcoll(3)), which
ignores some punctuation. This can lead to some situations where the order doesn't make intuitive
sense. In those cases, it may be desirable to unset this variable.
browser_sticky_cursor
Type: boolean
Default: yes
When this variable is set, the browser will attempt to keep the cursor on the same mailbox when
performing various functions. These include moving up a directory, toggling between mailboxes and
directory listing, creating/renaming a mailbox, toggling subscribed mailboxes, and entering a new
mask.
certificate_file
Type: path
Default: “~/.mutt_certificates”
This variable specifies the file where the certificates you trust are saved. When an unknown
certificate is encountered, you are asked if you accept it or not. If you accept it, the
certificate can also be saved in this file and further connections are automatically accepted.
You can also manually add CA certificates in this file. Any server certificate that is signed with
one of these CA certificates is also automatically accepted.
Example:
set certificate_file=~/.mutt/certificates
change_folder_next
Type: boolean
Default: no
When this variable is set, the <change-folder> function mailbox suggestion will start at the next
folder in your “mailboxes” list, instead of starting at the first folder in the list.
charset
Type: string
Default: “”
Character set your terminal uses to display and enter textual data. It is also the fallback for
$send_charset.
Upon startup Mutt tries to derive this value from environment variables such as $LC_CTYPE or
$LANG.
Note: It should only be set in case Mutt isn't able to determine the character set used correctly.
check_mbox_size
Type: boolean
Default: no
When this variable is set, mutt will use file size attribute instead of access time when checking
for new mail in mbox and mmdf folders.
This variable is unset by default and should only be enabled when new mail detection for these
folder types is unreliable or doesn't work.
Note that enabling this variable should happen before any “mailboxes” directives occur in
configuration files regarding mbox or mmdf folders because mutt needs to determine the initial new
mail status of such a mailbox by performing a fast mailbox scan when it is defined. Afterwards
the new mail status is tracked by file size changes.
check_new
Type: boolean
Default: yes
Note: this option only affects maildir and MH style mailboxes.
When set, Mutt will check for new mail delivered while the mailbox is open. Especially with MH
mailboxes, this operation can take quite some time since it involves scanning the directory and
checking each file to see if it has already been looked at. If this variable is unset, no check
for new mail is performed while the mailbox is open.
collapse_unread
Type: boolean
Default: yes
When unset, Mutt will not collapse a thread if it contains any unread messages.
compose_format
Type: string (localized)
Default: “-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-”
Controls the format of the status line displayed in the “compose” menu. This string is similar to
$status_format, but has its own set of printf(3)-like sequences:
%a total number of attachments
%h local hostname
%l approximate size (in bytes) of the current message (see formatstrings-size)
%v Mutt version string
See the text describing the $status_format option for more information on how to set
$compose_format.
config_charset
Type: string
Default: “”
When defined, Mutt will recode commands in rc files from this encoding to the current character
set as specified by $charset and aliases written to $alias_file from the current character set.
Please note that if setting $charset it must be done before setting $config_charset.
Recoding should be avoided as it may render unconvertable characters as question marks which can
lead to undesired side effects (for example in regular expressions).
confirmappend
Type: boolean
Default: yes
When set, Mutt will prompt for confirmation when appending messages to an existing mailbox.
confirmcreate
Type: boolean
Default: yes
When set, Mutt will prompt for confirmation when saving messages to a mailbox which does not yet
exist before creating it.
connect_timeout
Type: number
Default: 30
Causes Mutt to timeout a network connection (for IMAP, POP or SMTP) after this many seconds if the
connection is not able to be established. A negative value causes Mutt to wait indefinitely for
the connection attempt to succeed.
content_type
Type: string
Default: “text/plain”
Sets the default Content-Type for the body of newly composed messages.
copy
Type: quadoption
Default: yes
This variable controls whether or not copies of your outgoing messages will be saved for later
references. Also see $record, $save_name, $force_name and “fcc-hook”.
copy_decode_weed
Type: boolean
Default: no
Controls whether Mutt will weed headers when invoking the <decode-copy> or <decode-save>
functions.
count_alternatives
Type: boolean
Default: no
When set, Mutt will recurse inside multipart/alternatives while performing attachment searching
and counting (see attachments).
Traditionally, multipart/alternative parts have simply represented different encodings of the main
content of the email. Unfortunately, some mail clients have started to place email attachments
inside one of alternatives. Setting this will allow Mutt to find and count matching attachments
hidden there, and include them in the index via %X or through ~X pattern matching.
cursor_overlay
Type: boolean
Default: no
When set, Mutt will overlay the indicator, tree, sidebar_highlight, and sidebar_indicator colors
onto the currently selected line. This will allow default colors in those to be overridden, and
for attributes to be merged between the layers.
crypt_autoencrypt
Type: boolean
Default: no
Setting this variable will cause Mutt to always attempt to PGP encrypt outgoing messages. This is
probably only useful in connection to the “send-hook” command. It can be overridden by use of the
pgp menu, when encryption is not required or signing is requested as well. If $smime_is_default
is set, then OpenSSL is used instead to create S/MIME messages and settings can be overridden by
use of the smime menu instead. (Crypto only)
crypt_autopgp
Type: boolean
Default: yes
This variable controls whether or not mutt may automatically enable PGP encryption/signing for
messages. See also $crypt_autoencrypt, $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and
$smime_is_default.
crypt_autosign
Type: boolean
Default: no
Setting this variable will cause Mutt to always attempt to cryptographically sign outgoing
messages. This can be overridden by use of the pgp menu, when signing is not required or
encryption is requested as well. If $smime_is_default is set, then OpenSSL is used instead to
create S/MIME messages and settings can be overridden by use of the smime menu instead of the pgp
menu. (Crypto only)
crypt_autosmime
Type: boolean
Default: yes
This variable controls whether or not mutt may automatically enable S/MIME encryption/signing for
messages. See also $crypt_autoencrypt, $crypt_replyencrypt, $crypt_autosign, $crypt_replysign and
$smime_is_default.
crypt_confirmhook
Type: boolean
Default: yes
If set, then you will be prompted for confirmation of keys when using the crypt-hook command. If
unset, no such confirmation prompt will be presented. This is generally considered unsafe,
especially where typos are concerned.
crypt_opportunistic_encrypt
Type: boolean
Default: no
Setting this variable will cause Mutt to automatically enable and disable encryption, based on
whether all message recipient keys can be located by Mutt.
When this option is enabled, Mutt will enable/disable encryption each time the TO, CC, and BCC
lists are edited. If $edit_headers is set, Mutt will also do so each time the message is edited.
While this is set, encryption can't be manually enabled/disabled. The pgp or smime menus provide
a selection to temporarily disable this option for the current message.
If $crypt_autoencrypt or $crypt_replyencrypt enable encryption for a message, this option will be
disabled for that message. It can be manually re-enabled in the pgp or smime menus. (Crypto
only)
crypt_opportunistic_encrypt_strong_keys
Type: boolean
Default: no
When set, this modifies the behavior of $crypt_opportunistic_encrypt to only search for ”strong
keys”, that is, keys with full validity according to the web-of-trust algorithm. A key with
marginal or no validity will not enable opportunistic encryption.
For S/MIME, the behavior depends on the backend. Classic S/MIME will filter for certificates with
the 't' (trusted) flag in the .index file. The GPGME backend will use the same filters as with
OpenPGP, and depends on GPGME's logic for assigning the GPGME_VALIDITY_FULL and
GPGME_VALIDITY_ULTIMATE validity flag.
crypt_protected_headers_read
Type: boolean
Default: yes
When set, Mutt will display protected headers in the pager, and will update the index and header
cache with revised headers. Protected headers are stored inside the encrypted or signed part of
an an email, to prevent disclosure or tampering. For more information see
https://github.com/autocrypt/protected-headers. Currently Mutt only supports the Subject header.
Encrypted messages using protected headers often substitute the exposed Subject header with a
dummy value (see $crypt_protected_headers_subject). Mutt will update its concept of the correct
subject after the message is opened, i.e. via the <display-message> function. If you reply to a
message before opening it, Mutt will end up using the dummy Subject header, so be sure to open
such a message first. (Crypto only)
crypt_protected_headers_save
Type: boolean
Default: no
When $crypt_protected_headers_read is set, and a message with a protected Subject is opened, Mutt
will save the updated Subject into the header cache by default. This allows searching/limiting
based on the protected Subject header if the mailbox is re-opened, without having to re-open the
message each time. However, for mbox/mh mailbox types, or if header caching is not set up, you
would need to re-open the message each time the mailbox was reopened before you could see or
search/limit on the protected subject again.
When this variable is set, Mutt additionally saves the protected Subject back in the clear-text
message headers. This provides better usability, but with the tradeoff of reduced security. The
protected Subject header, which may have previously been encrypted, is now stored in clear-text in
the message headers. Copying the message elsewhere, via Mutt or external tools, could expose this
previously encrypted data. Please make sure you understand the consequences of this before you
enable this variable. (Crypto only)
crypt_protected_headers_subject
Type: string
Default: “...”
When $crypt_protected_headers_write is set, and the message is marked for encryption, this will be
substituted into the Subject field in the message headers. To prevent a subject from being
substituted, unset this variable, or set it to the empty string. (Crypto only)
crypt_protected_headers_write
Type: boolean
Default: no
When set, Mutt will generate protected headers for signed and encrypted emails. Protected headers
are stored inside the encrypted or signed part of an an email, to prevent disclosure or tampering.
For more information see https://github.com/autocrypt/protected-headers. Currently Mutt only
supports the Subject header. (Crypto only)
crypt_replyencrypt
Type: boolean
Default: yes
If set, automatically PGP or OpenSSL encrypt replies to messages which are encrypted. (Crypto
only)
crypt_replysign
Type: boolean
Default: no
If set, automatically PGP or OpenSSL sign replies to messages which are signed.
Note: this does not work on messages that are encrypted and signed! (Crypto only)
crypt_replysignencrypted
Type: boolean
Default: no
If set, automatically PGP or OpenSSL sign replies to messages which are encrypted. This makes
sense in combination with $crypt_replyencrypt, because it allows you to sign all messages which
are automatically encrypted. This works around the problem noted in $crypt_replysign, that mutt
is not able to find out whether an encrypted message is also signed. (Crypto only)
crypt_timestamp
Type: boolean
Default: yes
If set, mutt will include a time stamp in the lines surrounding PGP or S/MIME output, so spoofing
such lines is more difficult. If you are using colors to mark these lines, and rely on these, you
may unset this setting. (Crypto only)
crypt_use_gpgme
Type: boolean
Default: no
This variable controls the use of the GPGME-enabled crypto backends. If it is set and Mutt was
built with gpgme support, the gpgme code for S/MIME and PGP will be used instead of the classic
code. Note that you need to set this option in .muttrc; it won't have any effect when used
interactively.
Note that the GPGME backend does not support creating old-style inline (traditional) PGP encrypted
or signed messages (see $pgp_autoinline).
crypt_use_pka
Type: boolean
Default: no
Controls whether mutt uses PKA (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
verification (only supported by the GPGME backend).
crypt_verify_sig
Type: quadoption
Default: yes
If “yes”, always attempt to verify PGP or S/MIME signatures. If “ask-*”, ask whether or not to
verify the signature. If “no”, never attempt to verify cryptographic signatures. (Crypto only)
date_format
Type: string
Default: “!%a, %b %d, %Y at %I:%M:%S%p %Z”
This variable controls the format of the date printed by the “%d” sequence in $index_format. This
is passed to the strftime(3) function to process the date, see the man page for the proper syntax.
Unless the first character in the string is a bang (“!”), the month and week day names are
expanded according to the locale. If the first character in the string is a bang, the bang is
discarded, and the month and week day names in the rest of the string are expanded in the C locale
(that is in US English).
default_hook
Type: string
Default: “~f %s !~P | (~P ~C %s)”
This variable controls how “message-hook”, “reply-hook”, “send-hook”, “send2-hook”, “save-hook”,
and “fcc-hook” will be interpreted if they are specified with only a simple regexp, instead of a
matching pattern. The hooks are expanded when they are declared, so a hook will be interpreted
according to the value of this variable at the time the hook is declared.
The default value matches if the message is either from a user matching the regular expression
given, or if it is from you (if the from address matches “alternates”) and is to or cc'ed to a
user matching the given regular expression.
delete
Type: quadoption
Default: ask-yes
Controls whether or not messages are really deleted when closing or synchronizing a mailbox. If
set to yes, messages marked for deleting will automatically be purged without prompting. If set
to no, messages marked for deletion will be kept in the mailbox.
delete_untag
Type: boolean
Default: yes
If this option is set, mutt will untag messages when marking them for deletion. This applies when
you either explicitly delete a message, or when you save it to another folder.
digest_collapse
Type: boolean
Default: yes
If this option is set, mutt's received-attachments menu will not show the subparts of individual
messages in a multipart/digest. To see these subparts, press “v” on that menu.
display_filter
Type: path
Default: “”
When set, specifies a command used to filter messages. When a message is viewed it is passed as
standard input to $display_filter, and the filtered message is read from the standard output.
dotlock_program
Type: path
Default: “/usr/bin/mutt_dotlock”
Contains the path of the mutt_dotlock(1) binary to be used by mutt.
dsn_notify
Type: string
Default: “”
This variable sets the request for when notification is returned. The string consists of a comma
separated list (no spaces!) of one or more of the following: never, to never request notification,
failure, to request notification on transmission failure, delay, to be notified of message delays,
success, to be notified of successful transmission.
Example:
set dsn_notify=”failure,delay”
Note: when using $sendmail for delivery, you should not enable this unless you are either using
Sendmail 8.8.x or greater or a MTA providing a sendmail(1)-compatible interface supporting the -N
option for DSN. For SMTP delivery, DSN support is auto-detected so that it depends on the server
whether DSN will be used or not.
dsn_return
Type: string
Default: “”
This variable controls how much of your message is returned in DSN messages. It may be set to
either hdrs to return just the message header, or full to return the full message.
Example:
set dsn_return=hdrs
Note: when using $sendmail for delivery, you should not enable this unless you are either using
Sendmail 8.8.x or greater or a MTA providing a sendmail(1)-compatible interface supporting the -R
option for DSN. For SMTP delivery, DSN support is auto-detected so that it depends on the server
whether DSN will be used or not.
duplicate_threads
Type: boolean
Default: yes
This variable controls whether mutt, when $sort is set to threads, threads messages with the same
Message-Id together. If it is set, it will indicate that it thinks they are duplicates of each
other with an equals sign in the thread tree.
edit_headers
Type: boolean
Default: no
This option allows you to edit the header of your outgoing messages along with the body of your
message.
Although the compose menu may have localized header labels, the labels passed to your editor will
be standard RFC 2822 headers, (e.g. To:, Cc:, Subject:). Headers added in your editor must also
be RFC 2822 headers, or one of the pseudo headers listed in “edit-header”. Mutt will not
understand localized header labels, just as it would not when parsing an actual email.
Note that changes made to the References: and Date: headers are ignored for interoperability
reasons.
editor
Type: path
Default: “”
This variable specifies which editor is used by mutt. It defaults to the value of the $VISUAL, or
$EDITOR, environment variable, or to the string “vi” if neither of those are set.
The $editor string may contain a %s escape, which will be replaced by the name of the file to be
edited. If the %s escape does not appear in $editor, a space and the name to be edited are
appended.
The resulting string is then executed by running
sh -c 'string'
where string is the expansion of $editor described above.
encode_from
Type: boolean
Default: no
When set, mutt will quoted-printable encode messages when they contain the string “From ” (note
the trailing space) in the beginning of a line. This is useful to avoid the tampering certain
mail delivery and transport agents tend to do with messages (in order to prevent tools from
misinterpreting the line as a mbox message separator).
entropy_file
Type: path
Default: “”
The file which includes random data that is used to initialize SSL library functions.
envelope_from_address
Type: e-mail address
Default: “”
Manually sets the envelope sender for outgoing messages. This value is ignored if
$use_envelope_from is unset.
error_history
Type: number
Default: 30
This variable controls the size (in number of strings remembered) of the error messages displayed
by mutt. These can be shown with the <error-history> function. The history is cleared each time
this variable is set.
escape
Type: string
Default: “~”
Escape character to use for functions in the built-in editor.
fast_reply
Type: boolean
Default: no
When set, the initial prompt for recipients and subject are skipped when replying to messages, and
the initial prompt for subject is skipped when forwarding messages.
Note: this variable has no effect when the $autoedit variable is set.
fcc_attach
Type: quadoption
Default: yes
This variable controls whether or not attachments on outgoing messages are saved along with the
main body of your message.
Note: $fcc_before_send forces the default (set) behavior of this option.
fcc_before_send
Type: boolean
Default: no
When this variable is set, FCCs will occur before sending the message. Before sending, the
message cannot be manipulated, so it will be stored the exact same as sent: $fcc_attach and
$fcc_clear will be ignored (using their default values).
When unset, the default, FCCs will occur after sending. Variables $fcc_attach and $fcc_clear will
be respected, allowing it to be stored without attachments or encryption/signing if desired.
fcc_clear
Type: boolean
Default: no
When this variable is set, FCCs will be stored unencrypted and unsigned, even when the actual
message is encrypted and/or signed.
Note: $fcc_before_send forces the default (unset) behavior of this option. (PGP only)
See also $pgp_self_encrypt, $smime_self_encrypt.
fcc_delimiter
Type: string
Default: “”
When specified, this allows the ability to Fcc to more than one mailbox. The fcc value will be
split by this delimiter and Mutt will evaluate each part as a mailbox separately.
See $record, “fcc-hook”, and “fcc-save-hook”.
flag_safe
Type: boolean
Default: no
If set, flagged messages cannot be deleted.
folder
Type: path
Default: “~/Mail”
Specifies the default location of your mailboxes. A “+” or “=” at the beginning of a pathname
will be expanded to the value of this variable. Note that if you change this variable (from the
default) value you need to make sure that the assignment occurs before you use “+” or “=” for any
other variables since expansion takes place when handling the “mailboxes” command.
folder_format
Type: string
Default: “%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f”
This variable allows you to customize the file browser display to your personal taste. This
string is similar to $index_format, but has its own set of printf(3)-like sequences:
%C current file number
%d date/time folder was last modified
%D date/time folder was last modified using $date_format.
%f filename (“/” is appended to directory names, “@” to symbolic links and “*” to executable
files)
%F file permissions
%g group name (or numeric gid, if missing)
%l number of hard links
%m number of messages in the mailbox *
%n number of unread messages in the mailbox *
%N N if mailbox has new mail, blank otherwise
%s size in bytes (see formatstrings-size)
%t “*” if the file is tagged, blank otherwise
%u owner name (or numeric uid, if missing)
%>X right justify the rest of the string and pad with character “X”
%|X pad to the end of the line with character “X”
%*X soft-fill with character “X” as pad
For an explanation of “soft-fill”, see the $index_format documentation.
* = can be optionally printed if nonzero
%m, %n, and %N only work for monitored mailboxes. %m requires $mail_check_stats to be set. %n
requires $mail_check_stats to be set (except for IMAP mailboxes).
followup_to
Type: boolean
Default: yes
Controls whether or not the “Mail-Followup-To:” header field is generated when sending mail. When
set, Mutt will generate this field when you are replying to a known mailing list, specified with
the “subscribe” or “lists” commands.
This field has two purposes. First, preventing you from receiving duplicate copies of replies to
messages which you send to mailing lists, and second, ensuring that you do get a reply separately
for any messages sent to known lists to which you are not subscribed.
The header will contain only the list's address for subscribed lists, and both the list address
and your own email address for unsubscribed lists. Without this header, a group reply to your
message sent to a subscribed list will be sent to both the list and your address, resulting in two
copies of the same email for you.
force_name
Type: boolean
Default: no
This variable is similar to $save_name, except that Mutt will store a copy of your outgoing
message by the username of the address you are sending to even if that mailbox does not exist.
Also see the $record variable.
forward_attachments
Type: quadoption
Default: ask-yes
When forwarding inline (i.e. $mime_forward unset or answered with “no” and $forward_decode set),
attachments which cannot be decoded in a reasonable manner will be attached to the newly composed
message if this quadoption is set or answered with “yes”.
forward_attribution_intro
Type: string (localized)
Default: “----- Forwarded message from %f -----”
This is the string that will precede a message which has been forwarded in the main body of a
message (when $mime_forward is unset). For a full listing of defined printf(3)-like sequences see
the section on $index_format. See also $attribution_locale.
forward_attribution_trailer
Type: string (localized)
Default: “----- End forwarded message -----”
This is the string that will follow a message which has been forwarded in the main body of a
message (when $mime_forward is unset). For a full listing of defined printf(3)-like sequences see
the section on $index_format. See also $attribution_locale.
forward_decode
Type: boolean
Default: yes
Controls the decoding of complex MIME messages into text/plain when forwarding a message. The
message header is also RFC2047 decoded. This variable is only used, if $mime_forward is unset,
otherwise $mime_forward_decode is used instead.
forward_decrypt
Type: quadoption
Default: yes
This quadoption controls the handling of encrypted messages when forwarding or attaching a
message. When set to or answered “yes”, the outer layer of encryption is stripped off.
This variable is used if $mime_forward is set and $mime_forward_decode is unset. It is also used
when attaching a message via <attach-message> in the compose menu. (PGP only)
forward_edit
Type: quadoption
Default: yes
This quadoption controls whether or not the user is automatically placed in the editor when
forwarding messages. For those who always want to forward with no modification, use a setting of
“no”.
forward_format
Type: string
Default: “[%a: %s]”
This variable controls the default subject when forwarding a message. It uses the same format
sequences as the $index_format variable.
forward_quote
Type: boolean
Default: no
When set, forwarded messages included in the main body of the message (when $mime_forward is
unset) will be quoted using $indent_string.
from
Type: e-mail address
Default: “”
When set, this variable contains a default from address. It can be overridden using “my_hdr”
(including from a “send-hook”) and $reverse_name. This variable is ignored if $use_from is unset.
This setting defaults to the contents of the environment variable $EMAIL.
gecos_mask
Type: regular expression
Default: “^[^,]*”
A regular expression used by mutt to parse the GECOS field of a password entry when expanding the
alias. The default value will return the string up to the first “,” encountered. If the GECOS
field contains a string like “lastname, firstname” then you should set it to “.*”.
This can be useful if you see the following behavior: you address an e-mail to user ID “stevef”
whose full name is “Steve Franklin”. If mutt expands “stevef” to “”Franklin” stevef@foo.bar” then
you should set the $gecos_mask to a regular expression that will match the whole name so mutt will
expand “Franklin” to “Franklin, Steve”.
hdrs
Type: boolean
Default: yes
When unset, the header fields normally added by the “my_hdr” command are not created. This
variable must be unset before composing a new message or replying in order to take effect. If
set, the user defined header fields are added to every new message.
header
Type: boolean
Default: no
When set, this variable causes Mutt to include the header of the message you are replying to into
the edit buffer. The $weed setting applies.
header_cache
Type: path
Default: “”
This variable points to the header cache database. If pointing to a directory Mutt will contain a
header cache database file per folder, if pointing to a file that file will be a single global
header cache. By default it is unset so no header caching will be used.
Header caching can greatly improve speed when opening POP, IMAP MH or Maildir folders, see
“caching” for details.
header_cache_compress
Type: boolean
Default: yes
When mutt is compiled with qdbm, tokyocabinet, or kyotocabinet as header cache backend, this
option determines whether the database will be compressed. Compression results in database files
roughly being one fifth of the usual diskspace, but the decompression can result in a slower
opening of cached folder(s) which in general is still much faster than opening non header cached
folders.
header_cache_pagesize
Type: number (long)
Default: 16384
When mutt is compiled with either gdbm or bdb4 as the header cache backend, this option changes
the database page size. Too large or too small values can waste space, memory, or CPU time. The
default should be more or less optimal for most use cases.
header_color_partial
Type: boolean
Default: no
When set, color header regexps behave like color body regexps: color is applied to the exact text
matched by the regexp. When unset, color is applied to the entire header.
One use of this option might be to apply color to just the header labels.
See “color” for more details.
help
Type: boolean
Default: yes
When set, help lines describing the bindings for the major functions provided by each menu are
displayed on the first line of the screen.
Note: The binding will not be displayed correctly if the function is bound to a sequence rather
than a single keystroke. Also, the help line may not be updated if a binding is changed while
Mutt is running. Since this variable is primarily aimed at new users, neither of these should
present a major problem.
hidden_host
Type: boolean
Default: no
When set, mutt will skip the host name part of $hostname variable when adding the domain part to
addresses. This variable does not affect the generation of Message-IDs, and it will not lead to
the cut-off of first-level domains.
hide_limited
Type: boolean
Default: no
When set, mutt will not show the presence of messages that are hidden by limiting, in the thread
tree.
hide_missing
Type: boolean
Default: yes
When set, mutt will not show the presence of missing messages in the thread tree.
hide_thread_subject
Type: boolean
Default: yes
When set, mutt will not show the subject of messages in the thread tree that have the same subject
as their parent or closest previously displayed sibling.
hide_top_limited
Type: boolean
Default: no
When set, mutt will not show the presence of messages that are hidden by limiting, at the top of
threads in the thread tree. Note that when $hide_limited is set, this option will have no effect.
hide_top_missing
Type: boolean
Default: yes
When set, mutt will not show the presence of missing messages at the top of threads in the thread
tree. Note that when $hide_missing is set, this option will have no effect.
history
Type: number
Default: 10
This variable controls the size (in number of strings remembered) of the string history buffer per
category. The buffer is cleared each time the variable is set.
history_file
Type: path
Default: “~/.mutthistory”
The file in which Mutt will save its history.
Also see $save_history.
history_remove_dups
Type: boolean
Default: no
When set, all of the string history will be scanned for duplicates when a new entry is added.
Duplicate entries in the $history_file will also be removed when it is periodically compacted.
honor_disposition
Type: boolean
Default: no
When set, Mutt will not display attachments with a disposition of “attachment” inline even if it
could render the part to plain text. These MIME parts can only be viewed from the attachment menu.
If unset, Mutt will render all MIME parts it can properly transform to plain text.
honor_followup_to
Type: quadoption
Default: yes
This variable controls whether or not a Mail-Followup-To header is honored when group-replying to
a message.
hostname
Type: string
Default: “”
Specifies the fully-qualified hostname of the system mutt is running on containing the host's name
and the DNS domain it belongs to. It is used as the domain part (after “@”) for local email
addresses as well as Message-Id headers.
Its value is determined at startup as follows: the node's hostname is first determined by the
uname(3) function. The domain is then looked up using the gethostname(2) and getaddrinfo(3)
functions. If those calls are unable to determine the domain, the full value returned by uname is
used. Optionally, Mutt can be compiled with a fixed domain name in which case a detected one is
not used.
Starting in Mutt 2.0, the operations described in the previous paragraph are performed after the
muttrc is processed, instead of beforehand. This way, if the DNS operations are creating delays
at startup, you can avoid those by manually setting the value in your muttrc.
Also see $use_domain and $hidden_host.
idn_decode
Type: boolean
Default: yes
When set, Mutt will show you international domain names decoded. Note: You can use IDNs for
addresses even if this is unset. This variable only affects decoding. (IDN only)
idn_encode
Type: boolean
Default: yes
When set, Mutt will encode international domain names using IDN. Unset this if your SMTP server
can handle newer (RFC 6531) UTF-8 encoded domains. (IDN only)
ignore_linear_white_space
Type: boolean
Default: no
This option replaces linear-white-space between encoded-word and text to a single space to prevent
the display of MIME-encoded “Subject:” field from being divided into multiple lines.
ignore_list_reply_to
Type: boolean
Default: no
Affects the behavior of the <reply> function when replying to messages from mailing lists (as
defined by the “subscribe” or “lists” commands). When set, if the “Reply-To:” field is set to the
same value as the “To:” field, Mutt assumes that the “Reply-To:” field was set by the mailing list
to automate responses to the list, and will ignore this field. To direct a response to the
mailing list when this option is set, use the <list-reply> function; <group-reply> will reply to
both the sender and the list.
imap_authenticators
Type: string
Default: “”
This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an
IMAP server, in the order mutt should try them. Authentication methods are either “login” or the
right side of an IMAP “AUTH=xxx” capability string, e.g. “digest-md5”, “gssapi” or “cram-md5”.
This option is case-insensitive. If it's unset (the default) mutt will try all available methods,
in order from most-secure to least-secure.
Example:
set imap_authenticators=”gssapi:cram-md5:login”
Note: Mutt will only fall back to other authentication methods if the previous methods are
unavailable. If a method is available but authentication fails, mutt will not connect to the IMAP
server.
imap_check_subscribed
Type: boolean
Default: no
When set, mutt will fetch the set of subscribed folders from your server on connection, and add
them to the set of mailboxes it polls for new mail just as if you had issued individual
“mailboxes” commands.
imap_condstore
Type: boolean
Default: no
When set, mutt will use the CONDSTORE extension (RFC 7162) if advertised by the server. Mutt's
current implementation is basic, used only for initial message fetching and flag updates.
For some IMAP servers, enabling this will slightly speed up downloading initial messages.
Unfortunately, Gmail is not one those, and displays worse performance when enabled. Your mileage
may vary.
imap_deflate
Type: boolean
Default: no
When set, mutt will use the COMPRESS=DEFLATE extension (RFC 4978) if advertised by the server.
In general a good compression efficiency can be achieved, which speeds up reading large mailboxes
also on fairly good connections.
imap_delim_chars
Type: string
Default: “/.”
This contains the list of characters which you would like to treat as folder separators for
displaying IMAP paths. In particular it helps in using the “=” shortcut for your folder variable.
imap_fetch_chunk_size
Type: number (long)
Default: 0
When set to a value greater than 0, new headers will be downloaded in groups of this many headers
per request. If you have a very large mailbox, this might prevent a timeout and disconnect when
opening the mailbox, by sending a FETCH per set of this many headers, instead of a single FETCH
for all new headers.
imap_headers
Type: string
Default: “”
Mutt requests these header fields in addition to the default headers (“Date:”, “From:”, “Sender:”,
“Subject:”, “To:”, “Cc:”, “Message-Id:”, “References:”, “Content-Type:”, “Content-Description:”,
“In-Reply-To:”, “Reply-To:”, “Lines:”, “List-Post:”, “X-Label:”) from IMAP servers before
displaying the index menu. You may want to add more headers for spam detection.
Note: This is a space separated list, items should be uppercase and not contain the colon, e.g.
“X-BOGOSITY X-SPAM-STATUS” for the “X-Bogosity:” and “X-Spam-Status:” header fields.
imap_idle
Type: boolean
Default: no
When set, mutt will attempt to use the IMAP IDLE extension to check for new mail in the current
mailbox. Some servers (dovecot was the inspiration for this option) react badly to mutt's
implementation. If your connection seems to freeze up periodically, try unsetting this.
imap_keepalive
Type: number
Default: 300
This variable specifies the maximum amount of time in seconds that mutt will wait before polling
open IMAP connections, to prevent the server from closing them before mutt has finished with them.
The default is well within the RFC-specified minimum amount of time (30 minutes) before a server
is allowed to do this, but in practice the RFC does get violated every now and then. Reduce this
number if you find yourself getting disconnected from your IMAP server due to inactivity.
imap_list_subscribed
Type: boolean
Default: no
This variable configures whether IMAP folder browsing will look for only subscribed folders or all
folders. This can be toggled in the IMAP browser with the <toggle-subscribed> function.
imap_login
Type: string
Default: “”
Your login name on the IMAP server.
This variable defaults to the value of $imap_user.
imap_oauth_refresh_command
Type: string
Default: “”
The command to run to generate an OAUTH refresh token for authorizing your connection to your IMAP
server. This command will be run on every connection attempt that uses the OAUTHBEARER
authentication mechanism. See “oauth” for details.
imap_pass
Type: string
Default: “”
Specifies the password for your IMAP account. If unset, Mutt will prompt you for your password
when you invoke the <imap-fetch-mail> function or try to open an IMAP folder.
Warning: you should only use this option when you are on a fairly secure machine, because the
superuser can read your muttrc even if you are the only one who can read the file.
imap_passive
Type: boolean
Default: yes
When set, mutt will not open new IMAP connections to check for new mail. Mutt will only check for
new mail over existing IMAP connections. This is useful if you don't want to be prompted for
user/password pairs on mutt invocation, or if opening the connection is slow.
imap_peek
Type: boolean
Default: yes
When set, mutt will avoid implicitly marking your mail as read whenever you fetch a message from
the server. This is generally a good thing, but can make closing an IMAP folder somewhat slower.
This option exists to appease speed freaks.
imap_pipeline_depth
Type: number
Default: 15
Controls the number of IMAP commands that may be queued up before they are sent to the server. A
deeper pipeline reduces the amount of time mutt must wait for the server, and can make IMAP
servers feel much more responsive. But not all servers correctly handle pipelined commands, so if
you have problems you might want to try setting this variable to 0.
Note: Changes to this variable have no effect on open connections.
imap_poll_timeout
Type: number
Default: 15
This variable specifies the maximum amount of time in seconds that mutt will wait for a response
when polling IMAP connections for new mail, before timing out and closing the connection. Set to
0 to disable timing out.
imap_qresync
Type: boolean
Default: no
When set, mutt will use the QRESYNC extension (RFC 7162) if advertised by the server. Mutt's
current implementation is basic, used only for initial message fetching and flag updates.
Note: this feature is currently experimental. If you experience strange behavior, such as
duplicate or missing messages please file a bug report to let us know.
imap_servernoise
Type: boolean
Default: yes
When set, mutt will display warning messages from the IMAP server as error messages. Since these
messages are often harmless, or generated due to configuration problems on the server which are
out of the users' hands, you may wish to suppress them at some point.
imap_user
Type: string
Default: “”
The name of the user whose mail you intend to access on the IMAP server.
This variable defaults to your user name on the local machine.
implicit_autoview
Type: boolean
Default: no
If set to “yes”, mutt will look for a mailcap entry with the “copiousoutput” flag set for every
MIME attachment it doesn't have an internal viewer defined for. If such an entry is found, mutt
will use the viewer defined in that entry to convert the body part to text form.
include
Type: quadoption
Default: ask-yes
Controls whether or not a copy of the message(s) you are replying to is included in your reply.
include_encrypted
Type: boolean
Default: no
Controls whether or not Mutt includes separately encrypted attachment contents when replying.
This variable was added to prevent accidental exposure of encrypted contents when replying to an
attacker. If a previously encrypted message were attached by the attacker, they could trick an
unwary recipient into decrypting and including the message in their reply.
include_onlyfirst
Type: boolean
Default: no
Controls whether or not Mutt includes only the first attachment of the message you are replying.
indent_string
Type: string
Default: “> ”
Specifies the string to prepend to each line of text quoted in a message to which you are
replying. You are strongly encouraged not to change this value, as it tends to agitate the more
fanatical netizens.
The value of this option is ignored if $text_flowed is set, because the quoting mechanism is
strictly defined for format=flowed.
This option is a format string, please see the description of $index_format for supported
printf(3)-style sequences.
index_format
Type: string
Default: “%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s”
This variable allows you to customize the message index display to your personal taste.
“Format strings” are similar to the strings used in the C function printf(3) to format output (see
the man page for more details). For an explanation of the %? construct, see the $status_format
description. The following sequences are defined in Mutt:
%a address of the author
%A reply-to address (if present; otherwise: address of author)
%b filename of the original message folder (think mailbox)
%B the list to which the letter was sent, or else the folder name (%b).
%c number of characters (bytes) in the message (see formatstrings-size)
%C current message number
%d date and time of the message in the format specified by $date_format converted to sender's
time zone
%D date and time of the message in the format specified by $date_format converted to the local
time zone
%e current message number in thread
%E number of messages in current thread
%f sender (address + real name), either From: or Return-Path:
%F author name, or recipient name if the message is from you
%H spam attribute(s) of this message
%i message-id of the current message
%l number of lines in the unprocessed message (may not work with maildir, mh, and IMAP
folders)
%L If an address in the “To:” or “Cc:” header field matches an address defined by the users
“subscribe” command, this displays ”To <list-name>”, otherwise the same as %F.
%m total number of message in the mailbox
%M number of hidden messages if the thread is collapsed.
%N message score
%n author's real name (or address if missing)
%O original save folder where mutt would formerly have stashed the message: list name or
recipient name if not sent to a list
%P progress indicator for the built-in pager (how much of the file has been displayed)
%r comma separated list of “To:” recipients
%R comma separated list of “Cc:” recipients
%s subject of the message
%S single character status of the message (“N”/“O”/“D”/“d”/“!”/“r”/“*”)
%t “To:” field (recipients)
%T the appropriate character from the $to_chars string
%u user (login) name of the author
%v first name of the author, or the recipient if the message is from you
%X number of attachments (please see the “attachments” section for possible speed effects)
%y “X-Label:” field, if present
%Y “X-Label:” field, if present, and (1) not at part of a thread tree, (2) at the top of a
thread, or (3) “X-Label:” is different from preceding message's “X-Label:”.
%Z a three character set of message status flags. the first character is new/read/replied
flags (“n”/“o”/“r”/“O”/“N”). the second is deleted or encryption flags
(“D”/“d”/“S”/“P”/“s”/“K”). the third is either tagged/flagged (“*”/“!”), or one of the
characters listed in $to_chars.
%@name@
insert and evaluate format-string from the matching “index-format-hook” command
%{fmt} the date and time of the message is converted to sender's time zone, and “fmt” is expanded
by the library function strftime(3); a leading bang disables locales
%[fmt] the date and time of the message is converted to the local time zone, and “fmt” is expanded
by the library function strftime(3); a leading bang disables locales
%(fmt) the local date and time when the message was received. “fmt” is expanded by the library
function strftime(3); a leading bang disables locales
%<fmt> the current local time. “fmt” is expanded by the library function strftime(3); a leading
bang disables locales.
%>X right justify the rest of the string and pad with character “X”
%|X pad to the end of the line with character “X”
%*X soft-fill with character “X” as pad
Note that for mbox/mmdf, “%l” applies to the unprocessed message, and for maildir/mh, the value
comes from the “Lines:” header field when present (the meaning is normally the same). Thus the
value depends on the encodings used in the different parts of the message and has little meaning
in practice.
“Soft-fill” deserves some explanation: Normal right-justification will print everything to the
left of the “%>”, displaying padding and whatever lies to the right only if there's room. By
contrast, soft-fill gives priority to the right-hand side, guaranteeing space to display it and
showing padding only if there's still room. If necessary, soft-fill will eat text leftwards to
make room for rightward text.
Note that these expandos are supported in “save-hook”, “fcc-hook”, “fcc-save-hook”, and “index-
format-hook”.
They are also supported in the configuration variables $attribution, $forward_attribution_intro,
$forward_attribution_trailer, $forward_format, $indent_string, $message_format, $pager_format, and
$post_indent_string.
ispell
Type: path
Default: “/usr/bin/ispell”
How to invoke ispell (GNU's spell-checking software).
keep_flagged
Type: boolean
Default: no
If set, read messages marked as flagged will not be moved from your spool mailbox to your $mbox
mailbox, or as a result of a “mbox-hook” command.
local_date_header
Type: boolean
Default: yes
If set, convert the date in the Date header of sent emails into local (sender's) timezone.
mail_check
Type: number
Default: 5
This variable configures how often (in seconds) mutt should look for new mail. Also see the
$timeout variable.
mail_check_recent
Type: boolean
Default: yes
When set, Mutt will only notify you about new mail that has been received since the last time you
opened the mailbox. When unset, Mutt will notify you if any new mail exists in the mailbox,
regardless of whether you have visited it recently.
When $mark_old is set, Mutt does not consider the mailbox to contain new mail if only old messages
exist.
mail_check_stats
Type: boolean
Default: no
When set, mutt will periodically calculate message statistics of a mailbox while polling for new
mail. It will check for unread, flagged, and total message counts. Because this operation is
more performance intensive, it defaults to unset, and has a separate option,
$mail_check_stats_interval, to control how often to update these counts.
Message statistics can also be explicitly calculated by invoking the <check-stats> function.
mail_check_stats_interval
Type: number
Default: 60
When $mail_check_stats is set, this variable configures how often (in seconds) mutt will update
message counts.
mailcap_path
Type: string
Default: “”
This variable specifies which files to consult when attempting to display MIME bodies not directly
supported by Mutt. The default value is generated during startup: see the “mailcap” section of
the manual.
mailcap_sanitize
Type: boolean
Default: yes
If set, mutt will restrict possible characters in mailcap % expandos to a well-defined set of safe
characters. This is the safe setting, but we are not sure it doesn't break some more advanced
MIME stuff.
DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE DOING!
maildir_header_cache_verify
Type: boolean
Default: yes
Check for Maildir unaware programs other than mutt having modified maildir files when the header
cache is in use. This incurs one stat(2) per message every time the folder is opened (which can
be very slow for NFS folders).
maildir_trash
Type: boolean
Default: no
If set, messages marked as deleted will be saved with the maildir trashed flag instead of
unlinked. Note: this only applies to maildir-style mailboxes. Setting it will have no effect on
other mailbox types.
maildir_check_cur
Type: boolean
Default: no
If set, mutt will poll both the new and cur directories of a maildir folder for new messages.
This might be useful if other programs interacting with the folder (e.g. dovecot) are moving new
messages to the cur directory. Note that setting this option may slow down polling for new
messages in large folders, since mutt has to scan all cur messages.
mark_macro_prefix
Type: string
Default: “'”
Prefix for macros created using mark-message. A new macro automatically generated with
<mark-message>a will be composed from this prefix and the letter a.
mark_old
Type: boolean
Default: yes
Controls whether or not mutt marks new unread messages as old if you exit a mailbox without
reading them. With this option set, the next time you start mutt, the messages will show up with
an “O” next to them in the index menu, indicating that they are old.
markers
Type: boolean
Default: yes
Controls the display of wrapped lines in the internal pager. If set, a “+” marker is displayed at
the beginning of wrapped lines.
Also see the $smart_wrap variable.
mask
Type: regular expression
Default: “!^\.[^.]”
A regular expression used in the file browser, optionally preceded by the not operator “!”. Only
files whose names match this mask will be shown. The match is always case-sensitive.
mbox
Type: path
Default: “~/mbox”
This specifies the folder into which read mail in your $spoolfile folder will be appended.
Also see the $move variable.
mbox_type
Type: folder magic
Default: mbox
The default mailbox type used when creating new folders. May be any of “mbox”, “MMDF”, “MH” and
“Maildir”. This is overridden by the -m command-line option.
menu_context
Type: number
Default: 0
This variable controls the number of lines of context that are given when scrolling through menus.
(Similar to $pager_context.)
menu_move_off
Type: boolean
Default: yes
When unset, the bottom entry of menus will never scroll up past the bottom of the screen, unless
there are less entries than lines. When set, the bottom entry may move off the bottom.
menu_scroll
Type: boolean
Default: no
When set, menus will be scrolled up or down one line when you attempt to move across a screen
boundary. If unset, the screen is cleared and the next or previous page of the menu is displayed
(useful for slow links to avoid many redraws).
message_cache_clean
Type: boolean
Default: no
If set, mutt will clean out obsolete entries from the message cache when the mailbox is
synchronized. You probably only want to set it every once in a while, since it can be a little
slow (especially for large folders).
message_cachedir
Type: path
Default: “”
Set this to a directory and mutt will cache copies of messages from your IMAP and POP servers
here. You are free to remove entries at any time.
When setting this variable to a directory, mutt needs to fetch every remote message only once and
can perform regular expression searches as fast as for local folders.
Also see the $message_cache_clean variable.
message_format
Type: string
Default: “%s”
This is the string displayed in the “attachment” menu for attachments of type message/rfc822. For
a full listing of defined printf(3)-like sequences see the section on $index_format.
message_id_format
Type: string
Default: “<%z@%f>”
This variable describes the format of the Message-ID generated when sending messages. Mutt 2.0
introduced a more compact format, but this variable allows the ability to choose your own format.
The value may end in “|” to invoke an external filter. See formatstrings-filters.
Please note that the Message-ID value follows a strict syntax, and you are responsible for
ensuring correctness if you change this from the default. In particular, the value must follow
the syntax in RFC 5322: “”<” id-left ”@” id-right ”>””. No spaces are allowed, and id-left should
follow the dot-atom-text syntax in the RFC. The id-right should generally be left at %f.
The old Message-ID format can be used by setting this to: “<%Y%02m%02d%02H%02M%02S.G%c%p@%f>”
The following printf(3)-style sequences are understood:
%c step counter looping from “A” to “Z”
%d current day of the month (GMT)
%f $hostname
%H current hour using a 24-hour clock (GMT)
%m current month number (GMT)
%M current minute of the hour (GMT)
%p pid of the running mutt process
%r 3 bytes of pseudorandom data encoded in Base64
%S current second of the minute (GMT)
%x 1 byte of pseudorandom data hex encoded (example: '1b')
%Y current year using 4 digits (GMT)
%z 4 byte timestamp + 8 bytes of pseudorandom data encoded in Base64
meta_key
Type: boolean
Default: no
If set, forces Mutt to interpret keystrokes with the high bit (bit 8) set as if the user had
pressed the Esc key and whatever key remains after having the high bit removed. For example, if
the key pressed has an ASCII value of 0xf8, then this is treated as if the user had pressed Esc
then “x”. This is because the result of removing the high bit from 0xf8 is 0x78, which is the
ASCII character “x”.
metoo
Type: boolean
Default: no
If unset, Mutt will remove your address (see the “alternates” command) from the list of recipients
when replying to a message.
mh_purge
Type: boolean
Default: no
When unset, mutt will mimic mh's behavior and rename deleted messages to ,<old file name> in mh
folders instead of really deleting them. This leaves the message on disk but makes programs
reading the folder ignore it. If the variable is set, the message files will simply be deleted.
This option is similar to $maildir_trash for Maildir folders.
mh_seq_flagged
Type: string
Default: “flagged”
The name of the MH sequence used for flagged messages.
mh_seq_replied
Type: string
Default: “replied”
The name of the MH sequence used to tag replied messages.
mh_seq_unseen
Type: string
Default: “unseen”
The name of the MH sequence used for unseen messages.
mime_forward
Type: quadoption
Default: no
When set, the message you are forwarding will be attached as a separate message/rfc822 MIME part
instead of included in the main body of the message. This is useful for forwarding MIME messages
so the receiver can properly view the message as it was delivered to you. If you like to switch
between MIME and not MIME from mail to mail, set this variable to “ask-no” or “ask-yes”.
Also see $forward_decode and $mime_forward_decode.
mime_forward_decode
Type: boolean
Default: no
Controls the decoding of complex MIME messages into text/plain when forwarding a message while
$mime_forward is set. Otherwise $forward_decode is used instead.
mime_forward_rest
Type: quadoption
Default: yes
When forwarding multiple attachments of a MIME message from the attachment menu, attachments which
cannot be decoded in a reasonable manner will be attached to the newly composed message if this
option is set.
mime_type_query_command
Type: string
Default: “”
This specifies a command to run, to determine the mime type of a new attachment when composing a
message. Unless $mime_type_query_first is set, this will only be run if the attachment's
extension is not found in the mime.types file.
The string may contain a “%s”, which will be substituted with the attachment filename. Mutt will
add quotes around the string substituted for “%s” automatically according to shell quoting rules,
so you should avoid adding your own. If no “%s” is found in the string, Mutt will append the
attachment filename to the end of the string.
The command should output a single line containing the attachment's mime type.
Suggested values are “xdg-mime query filetype” or “file -bi”.
mime_type_query_first
Type: boolean
Default: no
When set, the $mime_type_query_command will be run before the mime.types lookup.
mix_entry_format
Type: string
Default: “%4n %c %-16s %a”
This variable describes the format of a remailer line on the mixmaster chain selection screen.
The following printf(3)-like sequences are supported:
%n The running number on the menu.
%c Remailer capabilities.
%s The remailer's short name.
%a The remailer's e-mail address.
mixmaster
Type: path
Default: “mixmaster”
This variable contains the path to the Mixmaster binary on your system. It is used with various
sets of parameters to gather the list of known remailers, and to finally send a message through
the mixmaster chain.
move
Type: quadoption
Default: no
Controls whether or not Mutt will move read messages from your spool mailbox to your $mbox
mailbox, or as a result of a “mbox-hook” command.
muttlisp_inline_eval
Type: boolean
Default: no
If set, Mutt will evaluate bare parenthesis arguments to commands as MuttLisp expressions.
narrow_tree
Type: boolean
Default: no
This variable, when set, makes the thread tree narrower, allowing deeper threads to fit on the
screen.
net_inc
Type: number
Default: 10
Operations that expect to transfer a large amount of data over the network will update their
progress every $net_inc kilobytes. If set to 0, no progress messages will be displayed.
See also $read_inc, $write_inc and $net_inc.
new_mail_command
Type: path
Default: “”
If set, Mutt will call this command after a new message is received. See the $status_format
documentation for the values that can be formatted into this command.
pager
Type: path
Default: “builtin”
This variable specifies which pager you would like to use to view messages. The value “builtin”
means to use the built-in pager, otherwise this variable should specify the pathname of the
external pager you would like to use.
Using an external pager may have some disadvantages: Additional keystrokes are necessary because
you can't call mutt functions directly from the pager, and screen resizes cause lines longer than
the screen width to be badly formatted in the help menu.
When using an external pager, also see $prompt_after which defaults set.
pager_context
Type: number
Default: 0
This variable controls the number of lines of context that are given when displaying the next or
previous page in the internal pager. By default, Mutt will display the line after the last one on
the screen at the top of the next page (0 lines of context).
This variable also specifies the amount of context given for search results. If positive, this
many lines will be given before a match, if 0, the match will be top-aligned.
pager_format
Type: string
Default: “-%Z- %C/%m: %-20.20n %s%* -- (%P)”
This variable controls the format of the one-line message “status” displayed before each message
in either the internal or an external pager. The valid sequences are listed in the $index_format
section.
pager_index_lines
Type: number
Default: 0
Determines the number of lines of a mini-index which is shown when in the pager. The current
message, unless near the top or bottom of the folder, will be roughly one third of the way down
this mini-index, giving the reader the context of a few messages before and after the message.
This is useful, for example, to determine how many messages remain to be read in the current
thread. One of the lines is reserved for the status bar from the index, so a setting of 6 will
only show 5 lines of the actual index. A value of 0 results in no index being shown. If the
number of messages in the current folder is less than $pager_index_lines, then the index will only
use as many lines as it needs.
pager_stop
Type: boolean
Default: no
When set, the internal-pager will not move to the next message when you are at the end of a
message and invoke the <next-page> function.
pattern_format
Type: string
Default: “%2n %-15e %d”
This variable describes the format of the “pattern completion” menu. The following printf(3)-style
sequences are understood:
%d pattern description
%e pattern expression
%n index number
pgp_auto_decode
Type: boolean
Default: no
If set, mutt will automatically attempt to decrypt traditional PGP messages whenever the user
performs an operation which ordinarily would result in the contents of the message being operated
on. For example, if the user displays a pgp-traditional message which has not been manually
checked with the <check-traditional-pgp> function, mutt will automatically check the message for
traditional pgp.
pgp_autoinline
Type: boolean
Default: no
This option controls whether Mutt generates old-style inline (traditional) PGP encrypted or signed
messages under certain circumstances. This can be overridden by use of the pgp menu, when inline
is not required. The GPGME backend does not support this option.
Note that Mutt might automatically use PGP/MIME for messages which consist of more than a single
MIME part. Mutt can be configured to ask before sending PGP/MIME messages when inline
(traditional) would not work.
Also see the $pgp_mime_auto variable.
Also note that using the old-style PGP message format is strongly deprecated. (PGP only)
pgp_check_exit
Type: boolean
Default: yes
If set, mutt will check the exit code of the PGP subprocess when signing or encrypting. A
non-zero exit code means that the subprocess failed. (PGP only)
pgp_check_gpg_decrypt_status_fd
Type: boolean
Default: yes
If set, mutt will check the status file descriptor output of $pgp_decrypt_command and
$pgp_decode_command for GnuPG status codes indicating successful decryption. This will check for
the presence of DECRYPTION_OKAY, absence of DECRYPTION_FAILED, and that all PLAINTEXT occurs
between the BEGIN_DECRYPTION and END_DECRYPTION status codes.
If unset, mutt will instead match the status fd output against $pgp_decryption_okay. (PGP only)
pgp_clearsign_command
Type: string
Default: “”
This format is used to create an old-style “clearsigned” PGP message. Note that the use of this
format is strongly deprecated.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_decode_command
Type: string
Default: “”
This format strings specifies a command which is used to decode application/pgp attachments.
The PGP command formats have their own set of printf(3)-like sequences:
%p Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty string otherwise. Note:
This may be used with a %? construct.
%f Expands to the name of a file containing a message.
%s Expands to the name of a file containing the signature part
of a multipart/signed attachment when verifying it.
%a The value of $pgp_sign_as if set, otherwise the value of $pgp_default_key.
%r One or more key IDs (or fingerprints if available).
For examples on how to configure these formats for the various versions of PGP which are floating
around, see the pgp and gpg sample configuration files in the samples/ subdirectory which has been
installed on your system alongside the documentation. (PGP only)
pgp_decrypt_command
Type: string
Default: “”
This command is used to decrypt a PGP encrypted message.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_decryption_okay
Type: regular expression
Default: “”
If you assign text to this variable, then an encrypted PGP message is only considered successfully
decrypted if the output from $pgp_decrypt_command contains the text. This is used to protect
against a spoofed encrypted message, with multipart/encrypted headers but containing a block that
is not actually encrypted. (e.g. simply signed and ascii armored text).
Note that if $pgp_check_gpg_decrypt_status_fd is set, this variable is ignored. (PGP only)
pgp_default_key
Type: string
Default: “”
This is the default key-pair to use for PGP operations. It will be used for encryption (see
$postpone_encrypt and $pgp_self_encrypt).
It will also be used for signing unless $pgp_sign_as is set.
The (now deprecated) pgp_self_encrypt_as is an alias for this variable, and should no longer be
used. (PGP only)
pgp_encrypt_only_command
Type: string
Default: “”
This command is used to encrypt a body part without signing it.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_encrypt_sign_command
Type: string
Default: “”
This command is used to both sign and encrypt a body part.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_entry_format
Type: string
Default: “%4n %t%f %4l/0x%k %-4a %2c %u”
This variable allows you to customize the PGP key selection menu to your personal taste. This
string is similar to $index_format, but has its own set of printf(3)-like sequences:
%n number
%k key id
%u user id
%a algorithm
%l key length
%f flags
%c capabilities
%t trust/validity of the key-uid association
%[<s>] date of the key where <s> is an strftime(3) expression
(PGP only)
pgp_export_command
Type: string
Default: “”
This command is used to export a public key from the user's key ring.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_getkeys_command
Type: string
Default: “”
This command is invoked whenever Mutt needs to fetch the public key associated with an email
address. Of the sequences supported by $pgp_decode_command, %r is the only printf(3)-like
sequence used with this format. Note that in this case, %r expands to the email address, not the
public key ID (the key ID is unknown, which is why Mutt is invoking this command). (PGP only)
pgp_good_sign
Type: regular expression
Default: “”
If you assign a text to this variable, then a PGP signature is only considered verified if the
output from $pgp_verify_command contains the text. Use this variable if the exit code from the
command is 0 even for bad signatures. (PGP only)
pgp_ignore_subkeys
Type: boolean
Default: yes
Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, the principal key will
inherit the subkeys' capabilities. Unset this if you want to play interesting key selection
games. (PGP only)
pgp_import_command
Type: string
Default: “”
This command is used to import a key from a message into the user's public key ring.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_list_pubring_command
Type: string
Default: “”
This command is used to list the public key ring's contents. The output format must be analogous
to the one used by
gpg --list-keys --with-colons --with-fingerprint
This format is also generated by the mutt_pgpring utility which comes with mutt.
Note: gpg's fixed-list-mode option should not be used. It produces a different date format which
may result in mutt showing incorrect key generation dates.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. Note that in this case, %r expands to the search string, which is a list of one or
more quoted values such as email address, name, or keyid. (PGP only)
pgp_list_secring_command
Type: string
Default: “”
This command is used to list the secret key ring's contents. The output format must be analogous
to the one used by:
gpg --list-keys --with-colons --with-fingerprint
This format is also generated by the mutt_pgpring utility which comes with mutt.
Note: gpg's fixed-list-mode option should not be used. It produces a different date format which
may result in mutt showing incorrect key generation dates.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. Note that in this case, %r expands to the search string, which is a list of one or
more quoted values such as email address, name, or keyid. (PGP only)
pgp_long_ids
Type: boolean
Default: yes
If set, use 64 bit PGP key IDs, if unset use the normal 32 bit key IDs. NOTE: Internally, Mutt
has transitioned to using fingerprints (or long key IDs as a fallback). This option now only
controls the display of key IDs in the key selection menu and a few other places. (PGP only)
pgp_mime_auto
Type: quadoption
Default: ask-yes
This option controls whether Mutt will prompt you for automatically sending a (signed/encrypted)
message using PGP/MIME when inline (traditional) fails (for any reason).
Also note that using the old-style PGP message format is strongly deprecated. (PGP only)
pgp_replyinline
Type: boolean
Default: no
Setting this variable will cause Mutt to always attempt to create an inline (traditional) message
when replying to a message which is PGP encrypted/signed inline. This can be overridden by use of
the pgp menu, when inline is not required. This option does not automatically detect if the
(replied-to) message is inline; instead it relies on Mutt internals for previously checked/flagged
messages.
Note that Mutt might automatically use PGP/MIME for messages which consist of more than a single
MIME part. Mutt can be configured to ask before sending PGP/MIME messages when inline
(traditional) would not work.
Also see the $pgp_mime_auto variable.
Also note that using the old-style PGP message format is strongly deprecated. (PGP only)
pgp_retainable_sigs
Type: boolean
Default: no
If set, signed and encrypted messages will consist of nested multipart/signed and
multipart/encrypted body parts.
This is useful for applications like encrypted and signed mailing lists, where the outer layer
(multipart/encrypted) can be easily removed, while the inner multipart/signed part is retained.
(PGP only)
pgp_self_encrypt
Type: boolean
Default: yes
When set, PGP encrypted messages will also be encrypted using the key in $pgp_default_key. (PGP
only)
pgp_show_unusable
Type: boolean
Default: yes
If set, mutt will display non-usable keys on the PGP key selection menu. This includes keys which
have been revoked, have expired, or have been marked as “disabled” by the user. (PGP only)
pgp_sign_as
Type: string
Default: “”
If you have a different key pair to use for signing, you should set this to the signing key. Most
people will only need to set $pgp_default_key. It is recommended that you use the keyid form to
specify your key (e.g. 0x00112233). (PGP only)
pgp_sign_command
Type: string
Default: “”
This command is used to create the detached PGP signature for a multipart/signed PGP/MIME body
part.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_sort_keys
Type: sort order
Default: address
Specifies how the entries in the pgp menu are sorted. The following are legal values:
address
sort alphabetically by user id
keyid sort alphabetically by key id
date sort by key creation date
trust sort by the trust of the key
If you prefer reverse order of the above values, prefix it with “reverse-”. (PGP only)
pgp_strict_enc
Type: boolean
Default: yes
If set, Mutt will automatically encode PGP/MIME signed messages as quoted-printable. Please note
that unsetting this variable may lead to problems with non-verifyable PGP signatures, so only
change this if you know what you are doing. (PGP only)
pgp_timeout
Type: number (long)
Default: 300
The number of seconds after which a cached passphrase will expire if not used. (PGP only)
pgp_use_gpg_agent
Type: boolean
Default: yes
If set, mutt expects a gpg-agent(1) process will handle private key passphrase prompts. If unset,
mutt will prompt for the passphrase and pass it via stdin to the pgp command.
Note that as of version 2.1, GnuPG automatically spawns an agent and requires the agent be used
for passphrase management. Since that version is increasingly prevalent, this variable now
defaults set.
Mutt works with a GUI or curses pinentry program. A TTY pinentry should not be used.
If you are using an older version of GnuPG without an agent running, or another encryption program
without an agent, you will need to unset this variable. (PGP only)
pgp_verify_command
Type: string
Default: “”
This command is used to verify PGP signatures.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pgp_verify_key_command
Type: string
Default: “”
This command is used to verify key information from the key selection menu.
This is a format string, see the $pgp_decode_command command for possible printf(3)-like
sequences. (PGP only)
pipe_decode
Type: boolean
Default: no
Used in connection with the <pipe-message> function. When unset, Mutt will pipe the messages
without any preprocessing. When set, Mutt will attempt to decode the messages first.
Also see $pipe_decode_weed, which controls whether headers will be weeded when this is set.
pipe_decode_weed
Type: boolean
Default: yes
For <pipe-message>, when $pipe_decode is set, this further controls whether Mutt will weed
headers.
pipe_sep
Type: string
Default: “\n”
The separator to add between messages when piping a list of tagged messages to an external Unix
command.
pipe_split
Type: boolean
Default: no
Used in connection with the <pipe-message> function following <tag-prefix>. If this variable is
unset, when piping a list of tagged messages Mutt will concatenate the messages and will pipe them
all concatenated. When set, Mutt will pipe the messages one by one. In both cases the messages
are piped in the current sorted order, and the $pipe_sep separator is added after each message.
pop_auth_try_all
Type: boolean
Default: yes
If set, Mutt will try all available authentication methods. When unset, Mutt will only fall back
to other authentication methods if the previous methods are unavailable. If a method is available
but authentication fails, Mutt will not connect to the POP server.
pop_authenticators
Type: string
Default: “”
This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an
POP server, in the order mutt should try them. Authentication methods are either “user”, “apop”
or any SASL mechanism, e.g. “digest-md5”, “gssapi” or “cram-md5”. This option is
case-insensitive. If this option is unset (the default) mutt will try all available methods, in
order from most-secure to least-secure.
Example:
set pop_authenticators=”digest-md5:apop:user”
pop_checkinterval
Type: number
Default: 60
This variable configures how often (in seconds) mutt should look for new mail in the currently
selected mailbox if it is a POP mailbox.
pop_delete
Type: quadoption
Default: ask-no
If set, Mutt will delete successfully downloaded messages from the POP server when using the
<fetch-mail> function. When unset, Mutt will download messages but also leave them on the POP
server.
pop_host
Type: string
Default: “”
The name of your POP server for the <fetch-mail> function. You can also specify an alternative
port, username and password, i.e.:
[pop[s]://][username[:password]@]popserver[:port]
where “[...]” denotes an optional part.
pop_last
Type: boolean
Default: no
If this variable is set, mutt will try to use the “LAST” POP command for retrieving only unread
messages from the POP server when using the <fetch-mail> function.
pop_oauth_refresh_command
Type: string
Default: “”
The command to run to generate an OAUTH refresh token for authorizing your connection to your POP
server. This command will be run on every connection attempt that uses the OAUTHBEARER
authentication mechanism. See “oauth” for details.
pop_pass
Type: string
Default: “”
Specifies the password for your POP account. If unset, Mutt will prompt you for your password
when you open a POP mailbox.
Warning: you should only use this option when you are on a fairly secure machine, because the
superuser can read your muttrc even if you are the only one who can read the file.
pop_reconnect
Type: quadoption
Default: ask-yes
Controls whether or not Mutt will try to reconnect to the POP server if the connection is lost.
pop_user
Type: string
Default: “”
Your login name on the POP server.
This variable defaults to your user name on the local machine.
post_indent_string
Type: string
Default: “”
Similar to the $attribution variable, Mutt will append this string after the inclusion of a
message which is being replied to. For a full listing of defined printf(3)-like sequences see the
section on $index_format.
postpone
Type: quadoption
Default: ask-yes
Controls whether or not messages are saved in the $postponed mailbox when you elect not to send
immediately.
Also see the $recall variable.
postponed
Type: path
Default: “~/postponed”
Mutt allows you to indefinitely “postpone sending a message” which you are editing. When you
choose to postpone a message, Mutt saves it in the mailbox specified by this variable.
Also see the $postpone variable.
postpone_encrypt
Type: boolean
Default: no
When set, postponed messages that are marked for encryption will be self-encrypted. Mutt will
first try to encrypt using the value specified in $pgp_default_key or $smime_default_key. If
those are not set, it will try the deprecated $postpone_encrypt_as. (Crypto only)
postpone_encrypt_as
Type: string
Default: “”
This is a deprecated fall-back variable for $postpone_encrypt. Please use $pgp_default_key or
$smime_default_key. (Crypto only)
preconnect
Type: string
Default: “”
If set, a shell command to be executed if mutt fails to establish a connection to the server. This
is useful for setting up secure connections, e.g. with ssh(1). If the command returns a nonzero
status, mutt gives up opening the server. Example:
set preconnect=”ssh -f -q -L 1234:mailhost.net:143 mailhost.net \
sleep 20 < /dev/null > /dev/null”
Mailbox “foo” on “mailhost.net” can now be reached as “{localhost:1234}foo”.
Note: For this example to work, you must be able to log in to the remote machine without having to
enter a password.
print
Type: quadoption
Default: ask-no
Controls whether or not Mutt really prints messages. This is set to “ask-no” by default, because
some people accidentally hit “p” often.
print_command
Type: path
Default: “lpr”
This specifies the command pipe that should be used to print messages.
print_decode
Type: boolean
Default: yes
Used in connection with the <print-message> function. If this option is set, the message is
decoded before it is passed to the external command specified by $print_command. If this option
is unset, no processing will be applied to the message when printing it. The latter setting may
be useful if you are using some advanced printer filter which is able to properly format e-mail
messages for printing.
Also see $print_decode_weed, which controls whether headers will be weeded when this is set.
print_decode_weed
Type: boolean
Default: yes
For <print-message>, when $print_decode is set, this further controls whether Mutt will weed
headers.
print_split
Type: boolean
Default: no
Used in connection with the <print-message> function. If this option is set, the command
specified by $print_command is executed once for each message which is to be printed. If this
option is unset, the command specified by $print_command is executed only once, and all the
messages are concatenated, with a form feed as the message separator.
Those who use the enscript(1) program's mail-printing mode will most likely want to set this
option.
prompt_after
Type: boolean
Default: yes
If you use an external $pager, setting this variable will cause Mutt to prompt you for a command
when the pager exits rather than returning to the index menu. If unset, Mutt will return to the
index menu when the external pager exits.
query_command
Type: path
Default: “”
This specifies the command Mutt will use to make external address queries. The string may contain
a “%s”, which will be substituted with the query string the user types. Mutt will add quotes
around the string substituted for “%s” automatically according to shell quoting rules, so you
should avoid adding your own. If no “%s” is found in the string, Mutt will append the user's
query to the end of the string. See “query” for more information.
query_format
Type: string
Default: “%4c %t %-25.25a %-25.25n %?e?(%e)?”
This variable describes the format of the “query” menu. The following printf(3)-style sequences
are understood:
%a destination address
%c current entry number
%e extra information *
%n destination name
%t “*” if current entry is tagged, a space otherwise
%>X right justify the rest of the string and pad with “X”
%|X pad to the end of the line with “X”
%*X soft-fill with character “X” as pad
For an explanation of “soft-fill”, see the $index_format documentation.
* = can be optionally printed if nonzero, see the $status_format documentation.
quit
Type: quadoption
Default: yes
This variable controls whether “quit” and “exit” actually quit from mutt. If this option is set,
they do quit, if it is unset, they have no effect, and if it is set to ask-yes or ask-no, you are
prompted for confirmation when you try to quit.
quote_regexp
Type: regular expression
Default: “^([ \t]*[|>:}#])+”
A regular expression used in the internal pager to determine quoted sections of text in the body
of a message. Quoted text may be filtered out using the <toggle-quoted> command, or colored
according to the “color quoted” family of directives.
Higher levels of quoting may be colored differently (“color quoted1”, “color quoted2”, etc.). The
quoting level is determined by removing the last character from the matched text and recursively
reapplying the regular expression until it fails to produce a match.
Match detection may be overridden by the $smileys regular expression.
read_inc
Type: number
Default: 10
If set to a value greater than 0, Mutt will display which message it is currently on when reading
a mailbox or when performing search actions such as search and limit. The message is printed after
this many messages have been read or searched (e.g., if set to 25, Mutt will print a message when
it is at message 25, and then again when it gets to message 50). This variable is meant to
indicate progress when reading or searching large mailboxes which may take some time. When set to
0, only a single message will appear before the reading the mailbox.
Also see the $write_inc, $net_inc and $time_inc variables and the “tuning” section of the manual
for performance considerations.
read_only
Type: boolean
Default: no
If set, all folders are opened in read-only mode.
realname
Type: string
Default: “”
This variable specifies what “real” or “personal” name should be used when sending messages.
By default, this is the GECOS field from /etc/passwd. Note that this variable will not be used
when the user has set a real name in the $from variable.
recall
Type: quadoption
Default: ask-yes
Controls whether or not Mutt recalls postponed messages when composing a new message.
Setting this variable to yes is not generally useful, and thus not recommended. Note that the
<recall-message> function can be used to manually recall postponed messages.
Also see $postponed variable.
record
Type: path
Default: “~/sent”
This specifies the file into which your outgoing messages should be appended. (This is meant as
the primary method for saving a copy of your messages, but another way to do this is using the
“my_hdr” command to create a “Bcc:” field with your email address in it.)
The value of $record is overridden by the $force_name and $save_name variables, and the “fcc-hook”
command. Also see $copy and $write_bcc.
Multiple mailboxes may be specified if $fcc_delimiter is set to a string delimiter.
reflow_space_quotes
Type: boolean
Default: yes
This option controls how quotes from format=flowed messages are displayed in the pager and when
replying (with $text_flowed unset). When set, this option adds spaces after each level of quote
marks, turning ”>>>foo” into ”> > > foo”.
Note: If $reflow_text is unset, this option has no effect. Also, this option does not affect
replies when $text_flowed is set.
reflow_text
Type: boolean
Default: yes
When set, Mutt will reformat paragraphs in text/plain parts marked format=flowed. If unset, Mutt
will display paragraphs unaltered from how they appear in the message body. See RFC3676 for
details on the format=flowed format.
Also see $reflow_wrap, and $wrap.
reflow_wrap
Type: number
Default: 78
This variable controls the maximum paragraph width when reformatting text/plain parts when
$reflow_text is set. When the value is 0, paragraphs will be wrapped at the terminal's right
margin. A positive value sets the paragraph width relative to the left margin. A negative value
set the paragraph width relative to the right margin.
Also see $wrap.
reply_regexp
Type: regular expression
Default: “^(re([\[0-9\]+])*|aw):[ \t]*”
A regular expression used to recognize reply messages when threading and replying. The default
value corresponds to the English ”Re:” and the German ”Aw:”.
reply_self
Type: boolean
Default: no
If unset and you are replying to a message sent by you, Mutt will assume that you want to reply to
the recipients of that message rather than to yourself.
Also see the “alternates” command.
reply_to
Type: quadoption
Default: ask-yes
If set, when replying to a message, Mutt will use the address listed in the Reply-to: header as
the recipient of the reply. If unset, it will use the address in the From: header field instead.
This option is useful for reading a mailing list that sets the Reply-To: header field to the list
address and you want to send a private message to the author of a message.
resolve
Type: boolean
Default: yes
When set, the cursor will be automatically advanced to the next (possibly undeleted) message
whenever a command that modifies the current message is executed.
resume_draft_files
Type: boolean
Default: no
If set, draft files (specified by -H on the command line) are processed similarly to when resuming
a postponed message. Recipients are not prompted for; send-hooks are not evaluated; no alias
expansion takes place; user-defined headers and signatures are not added to the message.
resume_edited_draft_files
Type: boolean
Default: yes
If set, draft files previously edited (via -E -H on the command line) will have
$resume_draft_files automatically set when they are used as a draft file again.
The first time a draft file is saved, mutt will add a header, X-Mutt-Resume-Draft to the saved
file. The next time the draft file is read in, if mutt sees the header, it will set
$resume_draft_files.
This option is designed to prevent multiple signatures, user-defined headers, and other processing
effects from being made multiple times to the draft file.
reverse_alias
Type: boolean
Default: no
This variable controls whether or not Mutt will display the “personal” name from your aliases in
the index menu if it finds an alias that matches the message's sender. For example, if you have
the following alias:
alias juser abd30425@somewhere.net (Joe User)
and then you receive mail which contains the following header:
From: abd30425@somewhere.net
It would be displayed in the index menu as “Joe User” instead of “abd30425@somewhere.net.” This
is useful when the person's e-mail address is not human friendly.
reverse_name
Type: boolean
Default: no
It may sometimes arrive that you receive mail to a certain machine, move the messages to another
machine, and reply to some the messages from there. If this variable is set, the default From:
line of the reply messages is built using the address where you received the messages you are
replying to if that address matches your “alternates”. If the variable is unset, or the address
that would be used doesn't match your “alternates”, the From: line will use your address on the
current machine.
Also see the “alternates” command and $reverse_realname.
reverse_realname
Type: boolean
Default: yes
This variable fine-tunes the behavior of the $reverse_name feature.
When it is unset, Mutt will remove the real name part of a matching address. This allows the use
of the email address without having to also use what the sender put in the real name field.
When it is set, Mutt will use the matching address as-is.
In either case, a missing real name will be filled in afterwards using the value of $realname.
rfc2047_parameters
Type: boolean
Default: no
When this variable is set, Mutt will decode RFC2047-encoded MIME parameters. You want to set this
variable when mutt suggests you to save attachments to files named like:
=?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?=
When this variable is set interactively, the change won't be active until you change folders.
Note that this use of RFC2047's encoding is explicitly prohibited by the standard, but
nevertheless encountered in the wild.
Also note that setting this parameter will not have the effect that mutt generates this kind of
encoding. Instead, mutt will unconditionally use the encoding specified in RFC2231.
save_address
Type: boolean
Default: no
If set, mutt will take the sender's full address when choosing a default folder for saving a mail.
If $save_name or $force_name is set too, the selection of the Fcc folder will be changed as well.
save_empty
Type: boolean
Default: yes
When unset, mailboxes which contain no saved messages will be removed when closed (the exception
is $spoolfile which is never removed). If set, mailboxes are never removed.
Note: This only applies to mbox and MMDF folders, Mutt does not delete MH and Maildir directories.
save_history
Type: number
Default: 0
This variable controls the size of the history (per category) saved in the $history_file file.
save_name
Type: boolean
Default: no
This variable controls how copies of outgoing messages are saved. When set, a check is made to
see if a mailbox specified by the recipient address exists (this is done by searching for a
mailbox in the $folder directory with the username part of the recipient address). If the mailbox
exists, the outgoing message will be saved to that mailbox, otherwise the message is saved to the
$record mailbox.
Also see the $force_name variable.
score
Type: boolean
Default: yes
When this variable is unset, scoring is turned off. This can be useful to selectively disable
scoring for certain folders when the $score_threshold_delete variable and related are used.
score_threshold_delete
Type: number
Default: -1
Messages which have been assigned a score equal to or lower than the value of this variable are
automatically marked for deletion by mutt. Since mutt scores are always greater than or equal to
zero, the default setting of this variable will never mark a message for deletion.
score_threshold_flag
Type: number
Default: 9999
Messages which have been assigned a score greater than or equal to this variable's value are
automatically marked ”flagged”.
score_threshold_read
Type: number
Default: -1
Messages which have been assigned a score equal to or lower than the value of this variable are
automatically marked as read by mutt. Since mutt scores are always greater than or equal to zero,
the default setting of this variable will never mark a message read.
search_context
Type: number
Default: 0
For the pager, this variable specifies the number of lines shown before search results. By
default, search results will be top-aligned.
send_charset
Type: string
Default: “us-ascii:iso-8859-1:utf-8”
A colon-delimited list of character sets for outgoing messages. Mutt will use the first character
set into which the text can be converted exactly. If your $charset is not “iso-8859-1” and
recipients may not understand “UTF-8”, it is advisable to include in the list an appropriate
widely used standard character set (such as “iso-8859-2”, “koi8-r” or “iso-2022-jp”) either
instead of or after “iso-8859-1”.
In case the text cannot be converted into one of these exactly, mutt uses $charset as a fallback.
send_multipart_alternative
Type: quadoption
Default: no
If set, Mutt will generate a multipart/alternative container and an alternative part using the
filter script specified in $send_multipart_alternative_filter. See the section “MIME
Multipart/Alternative” (alternative-order).
Note that enabling multipart/alternative is not compatible with inline PGP encryption. Mutt will
prompt to use PGP/MIME in that case.
send_multipart_alternative_filter
Type: path
Default: “”
This specifies a filter script, which will convert the main (composed) message of the email to an
alternative format. The message will be piped to the filter's stdin. The expected output of the
filter is the generated mime type, e.g. text/html, followed by a blank line, and then the
converted content. See the section “MIME Multipart/Alternative” (alternative-order).
sendmail
Type: path
Default: “/usr/sbin/sendmail -oem -oi”
Specifies the program and arguments used to deliver mail sent by Mutt. Mutt expects that the
specified program interprets additional arguments as recipient addresses. Mutt appends all
recipients after adding a -- delimiter (if not already present). Additional flags, such as for
$use_8bitmime, $use_envelope_from, $dsn_notify, or $dsn_return will be added before the delimiter.
See also: $write_bcc.
sendmail_wait
Type: number
Default: 0
Specifies the number of seconds to wait for the $sendmail process to finish before giving up and
putting delivery in the background.
Mutt interprets the value of this variable as follows:
>0 number of seconds to wait for sendmail to finish before continuing
0 wait forever for sendmail to finish
<0 always put sendmail in the background without waiting
Note that if you specify a value other than 0, the output of the child process will be put in a
temporary file. If there is some error, you will be informed as to where to find the output.
shell
Type: path
Default: “”
Command to use when spawning a subshell. By default, the user's login shell from /etc/passwd is
used.
sidebar_delim_chars
Type: string
Default: “/.”
This contains the list of characters which you would like to treat as folder separators for
displaying paths in the sidebar.
Local mail is often arranged in directories: `dir1/dir2/mailbox'.
set sidebar_delim_chars='/'
IMAP mailboxes are often named: `folder1.folder2.mailbox'.
set sidebar_delim_chars='.'
See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_indent_string.
sidebar_divider_char
Type: string
Default: “|”
This specifies the characters to be drawn between the sidebar (when visible) and the other Mutt
panels. ASCII and Unicode line-drawing characters are supported.
sidebar_folder_indent
Type: boolean
Default: no
Set this to indent mailboxes in the sidebar.
See also: $sidebar_short_path, $sidebar_indent_string, $sidebar_delim_chars.
sidebar_format
Type: string
Default: “%B%* %n”
This variable allows you to customize the sidebar display. This string is similar to
$index_format, but has its own set of printf(3)-like sequences:
%B Name of the mailbox
%S * Size of mailbox (total number of messages)
%N * Number of unread messages in the mailbox
%n N if mailbox has new mail, blank otherwise
%F * Number of Flagged messages in the mailbox
%! “!” : one flagged message; “!!” : two flagged messages; “n!” : n flagged messages (for n >
2). Otherwise prints nothing.
%d * @ Number of deleted messages
%L * @ Number of messages after limiting
%t * @ Number of tagged messages
%>X right justify the rest of the string and pad with “X”
%|X pad to the end of the line with “X”
%*X soft-fill with character “X” as pad
* = Can be optionally printed if nonzero @ = Only applicable to the current folder
In order to use %S, %N, %F, and %!, $mail_check_stats must be set. When thus set, a suggested
value for this option is ”%B%?F? [%F]?%* %?N?%N/?%S”.
sidebar_indent_string
Type: string
Default: “ ”
This specifies the string that is used to indent mailboxes in the sidebar. It defaults to two
spaces.
See also: $sidebar_short_path, $sidebar_folder_indent, $sidebar_delim_chars.
sidebar_new_mail_only
Type: boolean
Default: no
When set, the sidebar will only display mailboxes containing new, or flagged, mail.
See also: sidebar_whitelist.
sidebar_next_new_wrap
Type: boolean
Default: no
When set, the <sidebar-next-new> command will not stop and the end of the list of mailboxes, but
wrap around to the beginning. The <sidebar-prev-new> command is similarly affected, wrapping
around to the end of the list.
sidebar_relative_shortpath_indent
Type: boolean
Default: no
When set, this option changes how $sidebar_short_path and $sidebar_folder_indent perform
shortening and indentation: both will look at the previous sidebar entries and shorten/indent
relative to the most recent parent.
An example of this option set/unset for mailboxes listed in this order, with
$sidebar_short_path=yes, $sidebar_folder_indent=yes, and $sidebar_indent_string=”→”:
mailbox
set unset
=a.b =a.b →b
=a.b.c.d
→c.d →→→d
=a.b.e →e →→e
The second line illustrates most clearly. With this option set, =a.b.c.d is shortened relative to
=a.b, becoming c.d; it is also indented one place relative to =a.b. With this option unset
=a.b.c.d is always shortened to the last part of the mailbox, d and is indented three places, with
respect to $folder (represented by '=').
When set, the third line will also be indented and shortened relative to the first line.
sidebar_short_path
Type: boolean
Default: no
By default the sidebar will show the mailbox's path, relative to the $folder variable. Setting
sidebar_shortpath=yes will shorten the names relative to the previous name. Here's an example:
shortpath=no
shortpath=yes shortpath=yes, folderindent=yes, indentstr=”..”
fruit fruit fruit
fruit.apple
apple ..apple
fruit.banana
banana ..banana
fruit.cherry
cherry ..cherry
See also: $sidebar_delim_chars, $sidebar_folder_indent, $sidebar_indent_string.
sidebar_sort_method
Type: sort order
Default: unsorted
Specifies how to sort mailbox entries in the sidebar. By default, the entries are sorted
alphabetically. Valid values:
‐ alpha (alphabetically)
‐ count (all message count)
‐ flagged (flagged message count)
‐ name (alphabetically)
‐ new (unread message count)
‐ path (alphabetically)
‐ unread (unread message count)
‐ unsorted
You may optionally use the “reverse-” prefix to specify reverse sorting order (example: “set
sidebar_sort_method=reverse-alpha”).
sidebar_use_mailbox_shortcuts
Type: boolean
Default: no
When set, sidebar mailboxes will be displayed with mailbox shortcut prefixes ”=” or ”~”.
When unset, the sidebar will trim off a matching $folder prefix but otherwise not use mailbox
shortcuts.
sidebar_visible
Type: boolean
Default: no
This specifies whether or not to show sidebar. The sidebar shows a list of all your mailboxes.
See also: $sidebar_format, $sidebar_width
sidebar_width
Type: number
Default: 30
This controls the width of the sidebar. It is measured in screen columns. For example:
sidebar_width=20 could display 20 ASCII characters, or 10 Chinese characters.
sig_dashes
Type: boolean
Default: yes
If set, a line containing “-- ” (note the trailing space) will be inserted before your $signature.
It is strongly recommended that you not unset this variable unless your signature contains just
your name. The reason for this is because many software packages use “-- \n” to detect your
signature. For example, Mutt has the ability to highlight the signature in a different color in
the built-in pager.
sig_on_top
Type: boolean
Default: no
If set, the signature will be included before any quoted or forwarded text. It is strongly
recommended that you do not set this variable unless you really know what you are doing, and are
prepared to take some heat from netiquette guardians.
signature
Type: path
Default: “~/.signature”
Specifies the filename of your signature, which is appended to all outgoing messages. If the
filename ends with a pipe (“|”), it is assumed that filename is a shell command and input should
be read from its standard output.
simple_search
Type: string
Default: “~f %s | ~s %s”
Specifies how Mutt should expand a simple search into a real search pattern. A simple search is
one that does not contain any of the “~” pattern modifiers. See “patterns” for more information
on search patterns.
For example, if you simply type “joe” at a search or limit prompt, Mutt will automatically expand
it to the value specified by this variable by replacing “%s” with the supplied string. For the
default value, “joe” would be expanded to: “~f joe | ~s joe”.
size_show_bytes
Type: boolean
Default: no
If set, message sizes will display bytes for values less than 1 kilobyte. See formatstrings-size.
size_show_fractions
Type: boolean
Default: yes
If set, message sizes will be displayed with a single decimal value for sizes from 0 to 10
kilobytes and 1 to 10 megabytes. See formatstrings-size.
size_show_mb
Type: boolean
Default: yes
If set, message sizes will display megabytes for values greater than or equal to 1 megabyte. See
formatstrings-size.
size_units_on_left
Type: boolean
Default: no
If set, message sizes units will be displayed to the left of the number. See formatstrings-size.
sleep_time
Type: number
Default: 1
Specifies time, in seconds, to pause while displaying certain informational messages, while moving
from folder to folder and after expunging messages from the current folder. The default is to
pause one second, so a value of zero for this option suppresses the pause.
smart_wrap
Type: boolean
Default: yes
Controls the display of lines longer than the screen width in the internal pager. If set, long
lines are wrapped at a word boundary. If unset, lines are simply wrapped at the screen edge. Also
see the $markers variable.
smileys
Type: regular expression
Default: “(>From )|(:[-^]?[][)(><}{|/DP])”
The pager uses this variable to catch some common false positives of $quote_regexp, most notably
smileys and not consider a line quoted text if it also matches $smileys. This mostly happens at
the beginning of a line.
smime_ask_cert_label
Type: boolean
Default: yes
This flag controls whether you want to be asked to enter a label for a certificate about to be
added to the database or not. It is set by default. (S/MIME only)
smime_ca_location
Type: path
Default: “”
This variable contains the name of either a directory, or a file which contains trusted
certificates for use with OpenSSL. (S/MIME only)
smime_certificates
Type: path
Default: “”
Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle storage and retrieval
of keys by itself. This is very basic right now, and keys and certificates are stored in two
different directories, both named as the hash-value retrieved from OpenSSL. There is an index file
which contains mailbox-address keyid pairs, and which can be manually edited. This option points
to the location of the certificates. (S/MIME only)
smime_decrypt_command
Type: string
Default: “”
This format string specifies a command which is used to decrypt application/x-pkcs7-mime
attachments.
The OpenSSL command formats have their own set of printf(3)-like sequences similar to PGP's:
%f Expands to the name of a file containing a message.
%s Expands to the name of a file containing the signature part
of a multipart/signed attachment when verifying it.
%k The key-pair specified with $smime_default_key
%c One or more certificate IDs.
%a The algorithm used for encryption.
%d The message digest algorithm specified with $smime_sign_digest_alg.
%C CA location: Depending on whether $smime_ca_location
points to a directory or file, this expands to
“-CApath $smime_ca_location” or “-CAfile $smime_ca_location”.
For examples on how to configure these formats, see the smime.rc in the samples/ subdirectory
which has been installed on your system alongside the documentation. (S/MIME only)
smime_decrypt_use_default_key
Type: boolean
Default: yes
If set (default) this tells mutt to use the default key for decryption. Otherwise, if managing
multiple certificate-key-pairs, mutt will try to use the mailbox-address to determine the key to
use. It will ask you to supply a key, if it can't find one. (S/MIME only)
smime_default_key
Type: string
Default: “”
This is the default key-pair to use for S/MIME operations, and must be set to the keyid (the
hash-value that OpenSSL generates) to work properly.
It will be used for encryption (see $postpone_encrypt and $smime_self_encrypt). If GPGME is
enabled, this is the key id displayed by gpgsm.
It will be used for decryption unless $smime_decrypt_use_default_key is unset.
It will also be used for signing unless $smime_sign_as is set.
The (now deprecated) smime_self_encrypt_as is an alias for this variable, and should no longer be
used. (S/MIME only)
smime_encrypt_command
Type: string
Default: “”
This command is used to create encrypted S/MIME messages.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_encrypt_with
Type: string
Default: “aes256”
This sets the algorithm that should be used for encryption. Valid choices are “aes128”, “aes192”,
“aes256”, “des”, “des3”, “rc2-40”, “rc2-64”, “rc2-128”. (S/MIME only)
smime_get_cert_command
Type: string
Default: “”
This command is used to extract X509 certificates from a PKCS7 structure.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_get_cert_email_command
Type: string
Default: “”
This command is used to extract the mail address(es) used for storing X509 certificates, and for
verification purposes (to check whether the certificate was issued for the sender's mailbox).
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_get_signer_cert_command
Type: string
Default: “”
This command is used to extract only the signers X509 certificate from a S/MIME signature, so that
the certificate's owner may get compared to the email's “From:” field.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_import_cert_command
Type: string
Default: “”
This command is used to import a certificate via smime_keys.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_is_default
Type: boolean
Default: no
The default behavior of mutt is to use PGP on all auto-sign/encryption operations. To override and
to use OpenSSL instead this must be set. However, this has no effect while replying, since mutt
will automatically select the same application that was used to sign/encrypt the original message.
(Note that this variable can be overridden by unsetting $crypt_autosmime.) (S/MIME only)
smime_keys
Type: path
Default: “”
Since for S/MIME there is no pubring/secring as with PGP, mutt has to handle storage and retrieval
of keys/certs by itself. This is very basic right now, and stores keys and certificates in two
different directories, both named as the hash-value retrieved from OpenSSL. There is an index file
which contains mailbox-address keyid pair, and which can be manually edited. This option points to
the location of the private keys. (S/MIME only)
smime_pk7out_command
Type: string
Default: “”
This command is used to extract PKCS7 structures of S/MIME signatures, in order to extract the
public X509 certificate(s).
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_self_encrypt
Type: boolean
Default: yes
When set, S/MIME encrypted messages will also be encrypted using the certificate in
$smime_default_key. (S/MIME only)
smime_sign_as
Type: string
Default: “”
If you have a separate key to use for signing, you should set this to the signing key. Most people
will only need to set $smime_default_key. (S/MIME only)
smime_sign_command
Type: string
Default: “”
This command is used to created S/MIME signatures of type multipart/signed, which can be read by
all mail clients.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. NOTE: %c and %k will default to $smime_sign_as if set, otherwise $smime_default_key.
(S/MIME only)
smime_sign_digest_alg
Type: string
Default: “sha256”
This sets the algorithm that should be used for the signature message digest. Valid choices are
“md5”, “sha1”, “sha224”, “sha256”, “sha384”, “sha512”. (S/MIME only)
smime_sign_opaque_command
Type: string
Default: “”
This command is used to created S/MIME signatures of type application/x-pkcs7-signature, which can
only be handled by mail clients supporting the S/MIME extension.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_timeout
Type: number (long)
Default: 300
The number of seconds after which a cached passphrase will expire if not used. (S/MIME only)
smime_verify_command
Type: string
Default: “”
This command is used to verify S/MIME signatures of type multipart/signed.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smime_verify_opaque_command
Type: string
Default: “”
This command is used to verify S/MIME signatures of type application/x-pkcs7-mime.
This is a format string, see the $smime_decrypt_command command for possible printf(3)-like
sequences. (S/MIME only)
smtp_authenticators
Type: string
Default: “”
This is a colon-delimited list of authentication methods mutt may attempt to use to log in to an
SMTP server, in the order mutt should try them. Authentication methods are any SASL mechanism,
e.g. “digest-md5”, “gssapi” or “cram-md5”. This option is case-insensitive. If it is “unset”
(the default) mutt will try all available methods, in order from most-secure to least-secure.
Example:
set smtp_authenticators=”digest-md5:cram-md5”
smtp_oauth_refresh_command
Type: string
Default: “”
The command to run to generate an OAUTH refresh token for authorizing your connection to your SMTP
server. This command will be run on every connection attempt that uses the OAUTHBEARER
authentication mechanism. See “oauth” for details.
smtp_pass
Type: string
Default: “”
Specifies the password for your SMTP account. If unset, Mutt will prompt you for your password
when you first send mail via SMTP. See $smtp_url to configure mutt to send mail via SMTP.
Warning: you should only use this option when you are on a fairly secure machine, because the
superuser can read your muttrc even if you are the only one who can read the file.
smtp_url
Type: string
Default: “”
Defines the SMTP smarthost where sent messages should relayed for delivery. This should take the
form of an SMTP URL, e.g.:
smtp[s]://[user[:pass]@]host[:port]
where “[...]” denotes an optional part. Setting this variable overrides the value of the
$sendmail variable.
Also see $write_bcc.
sort
Type: sort order
Default: date
Specifies how to sort messages in the “index” menu. Valid values are:
‐ date or date-sent
‐ date-received
‐ from
‐ mailbox-order (unsorted)
‐ score
‐ size
‐ spam
‐ subject
‐ threads
‐ to
You may optionally use the “reverse-” prefix to specify reverse sorting order (example: “set
sort=reverse-date-sent”).
sort_alias
Type: sort order
Default: alias
Specifies how the entries in the “alias” menu are sorted. The following are legal values:
‐ address (sort alphabetically by email address)
‐ alias (sort alphabetically by alias name)
‐ unsorted (leave in order specified in .muttrc)
sort_aux
Type: sort order
Default: date
This provides a secondary sort for messages in the “index” menu, used when the $sort value is
equal for two messages.
When sorting by threads, this variable controls how threads are sorted in relation to other
threads, and how the branches of the thread trees are sorted. This can be set to any value that
$sort can, except “threads” (in that case, mutt will just use “date-sent”). You can also specify
the “last-” prefix in addition to the “reverse-” prefix, but “last-” must come after “reverse-”.
The “last-” prefix causes messages to be sorted against its siblings by which has the last
descendant, using the rest of $sort_aux as an ordering. For instance,
set sort_aux=last-date-received
would mean that if a new message is received in a thread, that thread becomes the last one
displayed (or the first, if you have “set sort=reverse-threads”.)
Note: For reversed-threads $sort order, $sort_aux is reversed again (which is not the right thing
to do, but kept to not break any existing configuration setting).
sort_browser
Type: sort order
Default: alpha
Specifies how to sort entries in the file browser. By default, the entries are sorted
alphabetically. Valid values:
‐ alpha (alphabetically)
‐ count
‐ date
‐ size
‐ unread
‐ unsorted
You may optionally use the “reverse-” prefix to specify reverse sorting order (example: “set
sort_browser=reverse-date”).
sort_browser_mailboxes
Type: sort order
Default: unsorted
Specifies how to sort entries in the mailbox browser. By default, the entries are unsorted,
displayed in the same order as listed in the “mailboxes” command. Valid values:
‐ alpha (alphabetically)
‐ count
‐ date
‐ size
‐ unread
‐ unsorted
You may optionally use the “reverse-” prefix to specify reverse sorting order (example: “set
sort_browser_mailboxes=reverse-alpha”).
sort_re
Type: boolean
Default: yes
This variable is only useful when sorting by threads with $strict_threads unset. In that case, it
changes the heuristic mutt uses to thread messages by subject. With $sort_re set, mutt will only
attach a message as the child of another message by subject if the subject of the child message
starts with a substring matching the setting of $reply_regexp. With $sort_re unset, mutt will
attach the message whether or not this is the case, as long as the non-$reply_regexp parts of both
messages are identical.
spam_separator
Type: string
Default: “,”
This variable controls what happens when multiple spam headers are matched: if unset, each
successive header will overwrite any previous matches value for the spam label. If set, each
successive match will append to the previous, using this variable's value as a separator.
spoolfile
Type: path
Default: “”
If your spool mailbox is in a non-default place where Mutt cannot find it, you can specify its
location with this variable. Mutt will initially set this variable to the value of the
environment variable $MAIL or $MAILDIR if either is defined.
ssl_ca_certificates_file
Type: path
Default: “”
This variable specifies a file containing trusted CA certificates. Any server certificate that is
signed with one of these CA certificates is also automatically accepted. (GnuTLS only)
Example:
set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt
ssl_client_cert
Type: path
Default: “”
The file containing a client certificate and its associated private key.
ssl_force_tls
Type: boolean
Default: yes
If this variable is set, Mutt will require that all connections to remote servers be encrypted.
Furthermore it will attempt to negotiate TLS even if the server does not advertise the capability,
since it would otherwise have to abort the connection anyway. This option supersedes
$ssl_starttls.
ssl_min_dh_prime_bits
Type: number
Default: 0
This variable specifies the minimum acceptable prime size (in bits) for use in any Diffie-Hellman
key exchange. A value of 0 will use the default from the GNUTLS library. (GnuTLS only)
ssl_starttls
Type: quadoption
Default: yes
If set (the default), mutt will attempt to use STARTTLS on servers advertising the capability.
When unset, mutt will not attempt to use STARTTLS regardless of the server's capabilities.
Note that STARTTLS is subject to many kinds of attacks, including the ability of a
machine-in-the-middle to suppress the advertising of support. Setting $ssl_force_tls is
recommended if you rely on STARTTLS.
ssl_use_sslv2
Type: boolean
Default: no
If set , Mutt will use SSLv2 when communicating with servers that request it. N.B. As of 2011,
SSLv2 is considered insecure, and using is inadvisable. See https://tools.ietf.org/html/rfc6176 .
(OpenSSL only)
ssl_use_sslv3
Type: boolean
Default: no
If set , Mutt will use SSLv3 when communicating with servers that request it. N.B. As of 2015,
SSLv3 is considered insecure, and using it is inadvisable. See https://tools.ietf.org/html/rfc7525
.
ssl_use_tlsv1
Type: boolean
Default: no
If set , Mutt will use TLSv1.0 when communicating with servers that request it. N.B. As of 2015,
TLSv1.0 is considered insecure, and using it is inadvisable. See
https://tools.ietf.org/html/rfc7525 .
ssl_use_tlsv1_1
Type: boolean
Default: no
If set , Mutt will use TLSv1.1 when communicating with servers that request it. N.B. As of 2015,
TLSv1.1 is considered insecure, and using it is inadvisable. See
https://tools.ietf.org/html/rfc7525 .
ssl_use_tlsv1_2
Type: boolean
Default: yes
If set , Mutt will use TLSv1.2 when communicating with servers that request it.
ssl_use_tlsv1_3
Type: boolean
Default: yes
If set , Mutt will use TLSv1.3 when communicating with servers that request it.
ssl_usesystemcerts
Type: boolean
Default: yes
If set to yes, mutt will use CA certificates in the system-wide certificate store when checking if
a server certificate is signed by a trusted CA. (OpenSSL only)
ssl_verify_dates
Type: boolean
Default: yes
If set (the default), mutt will not automatically accept a server certificate that is either not
yet valid or already expired. You should only unset this for particular known hosts, using the
<account-hook> function.
ssl_verify_host
Type: boolean
Default: yes
If set (the default), mutt will not automatically accept a server certificate whose host name does
not match the host used in your folder URL. You should only unset this for particular known hosts,
using the <account-hook> function.
ssl_verify_host_override
Type: string
Default: “”
Defines an alternate host name to verify the server certificate against. This should not be set
unless you are sure what you are doing, but it might be useful for connection to a .onion host
without a properly configured host name in the certificate. See $ssl_verify_host.
ssl_verify_partial_chains
Type: boolean
Default: no
This option should not be changed from the default unless you understand what you are doing.
Setting this variable to yes will permit verifying partial certification chains, i. e. a
certificate chain where not the root, but an intermediate certificate CA, or the host certificate,
are marked trusted (in $certificate_file), without marking the root signing CA as trusted.
(OpenSSL 1.0.2b and newer only).
ssl_ciphers
Type: string
Default: “”
Contains a colon-separated list of ciphers to use when using SSL. For OpenSSL, see ciphers(1) for
the syntax of the string.
For GnuTLS, this option will be used in place of ”NORMAL” at the start of the priority string.
See gnutls_priority_init(3) for the syntax and more details. (Note: GnuTLS version 2.1.7 or higher
is required.)
status_chars
Type: string
Default: “-*%A”
Controls the characters used by the “%r” indicator in $status_format. The first character is used
when the mailbox is unchanged. The second is used when the mailbox has been changed, and it needs
to be resynchronized. The third is used if the mailbox is in read-only mode, or if the mailbox
will not be written when exiting that mailbox (You can toggle whether to write changes to a
mailbox with the <toggle-write> operation, bound by default to “%”). The fourth is used to
indicate that the current folder has been opened in attach- message mode (Certain operations like
composing a new mail, replying, forwarding, etc. are not permitted in this mode).
status_format
Type: string (localized)
Default: “-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?B? Back:%B?%?l? %l?]---(%s/%S)-%>-(%P)---”
Controls the format of the status line displayed in the “index” menu. This string is similar to
$index_format, but has its own set of printf(3)-like sequences:
%b number of mailboxes with new mail *
%B number of backgrounded editing sessions *
%d number of deleted messages *
%f the full pathname of the current mailbox
%F number of flagged messages *
%h local hostname
%l size (in bytes) of the current mailbox (see formatstrings-size) *
%L size (in bytes) of the messages shown (i.e., which match the current limit) (see
formatstrings-size) *
%m the number of messages in the mailbox *
%M the number of messages shown (i.e., which match the current limit) *
%n number of new messages in the mailbox *
%o number of old unread messages *
%p number of postponed messages *
%P percentage of the way through the index
%r modified/read-only/won't-write/attach-message indicator, according to $status_chars
%R number of read messages *
%s current sorting mode ($sort)
%S current aux sorting method ($sort_aux)
%t number of tagged messages *
%u number of unread messages *
%v Mutt version string
%V currently active limit pattern, if any *
%>X right justify the rest of the string and pad with “X”
%|X pad to the end of the line with “X”
%*X soft-fill with character “X” as pad
For an explanation of “soft-fill”, see the $index_format documentation.
* = can be optionally printed if nonzero
Some of the above sequences can be used to optionally print a string if their value is nonzero.
For example, you may only want to see the number of flagged messages if such messages exist, since
zero is not particularly meaningful. To optionally print a string based upon one of the above
sequences, the following construct is used:
%?<sequence_char>?<optional_string>?
where sequence_char is a character from the table above, and optional_string is the string you
would like printed if sequence_char is nonzero. optional_string may contain other sequences as
well as normal text, but you may not nest optional strings.
Here is an example illustrating how to optionally print the number of new messages in a mailbox:
%?n?%n new messages.?
You can also switch between two strings using the following construct:
%?<sequence_char>?<if_string>&<else_string>?
If the value of sequence_char is non-zero, if_string will be expanded, otherwise else_string will
be expanded.
You can force the result of any printf(3)-like sequence to be lowercase by prefixing the sequence
character with an underscore (“_”) sign. For example, if you want to display the local hostname
in lowercase, you would use: “%_h”.
If you prefix the sequence character with a colon (“:”) character, mutt will replace any dots in
the expansion by underscores. This might be helpful with IMAP folders that don't like dots in
folder names.
status_on_top
Type: boolean
Default: no
Setting this variable causes the “status bar” to be displayed on the first line of the screen
rather than near the bottom. If $help is set, too it'll be placed at the bottom.
strict_threads
Type: boolean
Default: no
If set, threading will only make use of the “In-Reply-To” and “References:” fields when you $sort
by message threads. By default, messages with the same subject are grouped together in “pseudo
threads.”. This may not always be desirable, such as in a personal mailbox where you might have
several unrelated messages with the subjects like “hi” which will get grouped together. See also
$sort_re for a less drastic way of controlling this behavior.
suspend
Type: boolean
Default: yes
When unset, mutt won't stop when the user presses the terminal's susp key, usually “^Z”. This is
useful if you run mutt inside an xterm using a command like “xterm -e mutt”.
text_flowed
Type: boolean
Default: no
When set, mutt will generate “format=flowed” bodies with a content type of “text/plain;
format=flowed”. This format is easier to handle for some mailing software, and generally just
looks like ordinary text. To actually make use of this format's features, you'll need support in
your editor.
The option only controls newly composed messages. Postponed messages, resent messages, and draft
messages (via -H on the command line) will use the content-type of the source message.
Note that $indent_string is ignored when this option is set.
thorough_search
Type: boolean
Default: yes
Affects the ~b, ~B, and ~h search operations described in section “patterns”. If set, the headers
and body/attachments of messages to be searched are decoded before searching. If unset, messages
are searched as they appear in the folder.
Users searching attachments or for non-ASCII characters should set this value because decoding
also includes MIME parsing/decoding and possible character set conversions. Otherwise mutt will
attempt to match against the raw message received (for example quoted-printable encoded or with
encoded headers) which may lead to incorrect search results.
thread_received
Type: boolean
Default: no
When set, mutt uses the date received rather than the date sent to thread messages by subject.
tilde
Type: boolean
Default: no
When set, the internal-pager will pad blank lines to the bottom of the screen with a tilde (“~”).
time_inc
Type: number
Default: 0
Along with $read_inc, $write_inc, and $net_inc, this variable controls the frequency with which
progress updates are displayed. It suppresses updates less than $time_inc milliseconds apart. This
can improve throughput on systems with slow terminals, or when running mutt on a remote system.
Also see the “tuning” section of the manual for performance considerations.
timeout
Type: number
Default: 600
When Mutt is waiting for user input either idling in menus or in an interactive prompt, Mutt would
block until input is present. Depending on the context, this would prevent certain operations from
working, like checking for new mail or keeping an IMAP connection alive.
This variable controls how many seconds Mutt will at most wait until it aborts waiting for input,
performs these operations and continues to wait for input.
A value of zero or less will cause Mutt to never time out.
tmpdir
Type: path
Default: “”
This variable allows you to specify where Mutt will place its temporary files needed for
displaying and composing messages. If this variable is not set, the environment variable $TMPDIR
is used. If $TMPDIR is not set then “/var/tmp” is used.
to_chars
Type: string
Default: “ +TCFL”
Controls the character used to indicate mail addressed to you. The first character is the one
used when the mail is not addressed to your address. The second is used when you are the only
recipient of the message. The third is when your address appears in the “To:” header field, but
you are not the only recipient of the message. The fourth character is used when your address is
specified in the “Cc:” header field, but you are not the only recipient. The fifth character is
used to indicate mail that was sent by you. The sixth character is used to indicate when a mail
was sent to a mailing-list you subscribe to.
trash
Type: path
Default: “”
If set, this variable specifies the path of the trash folder where the mails marked for deletion
will be moved, instead of being irremediably purged.
NOTE: When you delete a message in the trash folder, it is really deleted, so that you have a way
to clean the trash.
ts_icon_format
Type: string (localized)
Default: “M%?n?AIL&ail?”
Controls the format of the icon title, as long as “$ts_enabled” is set. This string is identical
in formatting to the one used by “$status_format”.
ts_enabled
Type: boolean
Default: no
Controls whether mutt tries to set the terminal status line and icon name. Most terminal
emulators emulate the status line in the window title.
ts_status_format
Type: string (localized)
Default: “Mutt with %?m?%m messages&no messages?%?n? [%n NEW]?”
Controls the format of the terminal status line (or window title), provided that “$ts_enabled” has
been set. This string is identical in formatting to the one used by “$status_format”.
tunnel
Type: string
Default: “”
Setting this variable will cause mutt to open a pipe to a command instead of a raw socket. You may
be able to use this to set up preauthenticated connections to your IMAP/POP3/SMTP server. Example:
set tunnel=”ssh -q mailhost.net /usr/local/libexec/imapd”
Note: For this example to work you must be able to log in to the remote machine without having to
enter a password.
When set, Mutt uses the tunnel for all remote connections. Please see “account-hook” in the
manual for how to use different tunnel commands per connection.
tunnel_is_secure
Type: boolean
Default: yes
When set, Mutt will assume the $tunnel connection does not need STARTTLS to be enabled. It will
also allow IMAP PREAUTH server responses inside a tunnel to proceed. This is appropriate if
$tunnel uses ssh or directly invokes the server locally.
When unset, Mutt will negotiate STARTTLS according to the ssl_starttls and ssl_force_tls
variables. If ssl_force_tls is set, Mutt will abort connecting if an IMAP server responds with
PREAUTH. This setting is appropriate if $tunnel does not provide security and could be tampered
with by attackers.
uncollapse_jump
Type: boolean
Default: no
When set, Mutt will jump to the next unread message, if any, when the current thread is
uncollapsed.
uncollapse_new
Type: boolean
Default: yes
When set, Mutt will automatically uncollapse any collapsed thread that receives a new message.
When unset, collapsed threads will remain collapsed. the presence of the new message will still
affect index sorting, though.
use_8bitmime
Type: boolean
Default: no
Warning: do not set this variable unless you are using a version of sendmail which supports the
-B8BITMIME flag (such as sendmail 8.8.x) or you may not be able to send mail.
When set, Mutt will invoke $sendmail with the -B8BITMIME flag when sending 8-bit messages to
enable ESMTP negotiation.
use_domain
Type: boolean
Default: yes
When set, Mutt will qualify all local addresses (ones without the “@host” portion) with the value
of $hostname. If unset, no addresses will be qualified.
use_envelope_from
Type: boolean
Default: no
When set, mutt will set the envelope sender of the message. If $envelope_from_address is set, it
will be used as the sender address. If unset, mutt will attempt to derive the sender from the
“From:” header.
Note that this information is passed to sendmail command using the -f command line switch.
Therefore setting this option is not useful if the $sendmail variable already contains -f or if
the executable pointed to by $sendmail doesn't support the -f switch.
use_from
Type: boolean
Default: yes
When set, Mutt will generate the “From:” header field when sending messages. If unset, no “From:”
header field will be generated unless the user explicitly sets one using the “my_hdr” command.
use_ipv6
Type: boolean
Default: yes
When set, Mutt will look for IPv6 addresses of hosts it tries to contact. If this option is
unset, Mutt will restrict itself to IPv4 addresses. Normally, the default should work.
user_agent
Type: boolean
Default: no
When set, mutt will add a “User-Agent:” header to outgoing messages, indicating which version of
mutt was used for composing them.
visual
Type: path
Default: “”
Specifies the visual editor to invoke when the “~v” command is given in the built-in editor.
wait_key
Type: boolean
Default: yes
Controls whether Mutt will ask you to press a key after an external command has been invoked by
these functions: <shell-escape>, <pipe-message>, <pipe-entry>, <print-message>, and <print-entry>
commands.
It is also used when viewing attachments with “auto_view”, provided that the corresponding mailcap
entry has a needsterminal flag, and the external program is interactive.
When set, Mutt will always ask for a key. When unset, Mutt will wait for a key only if the
external command returned a non-zero status.
weed
Type: boolean
Default: yes
When set, mutt will weed headers when displaying, forwarding, or replying to messages.
Also see $copy_decode_weed, $pipe_decode_weed, $print_decode_weed.
wrap
Type: number
Default: 0
When set to a positive value, mutt will wrap text at $wrap characters. When set to a negative
value, mutt will wrap text so that there are $wrap characters of empty space on the right side of
the terminal. Setting it to zero makes mutt wrap at the terminal width.
Also see $reflow_wrap.
wrap_headers
Type: number
Default: 78
This option specifies the number of characters to use for wrapping an outgoing message's headers.
Allowed values are between 78 and 998 inclusive.
Note: This option usually shouldn't be changed. RFC5233 recommends a line length of 78 (the
default), so please only change this setting when you know what you're doing.
wrap_search
Type: boolean
Default: yes
Controls whether searches wrap around the end.
When set, searches will wrap around the first (or last) item. When unset, incremental searches
will not wrap.
wrapmargin
Type: number
Default: 0
(DEPRECATED) Equivalent to setting $wrap with a negative value.
write_bcc
Type: boolean
Default: no
Controls whether mutt writes out the “Bcc:” header when preparing messages to be sent. Some MTAs,
such as Exim and Courier, do not strip the “Bcc:” header; so it is advisable to leave this unset
unless you have a particular need for the header to be in the sent message.
If mutt is set to deliver directly via SMTP (see $smtp_url), this option does nothing: mutt will
never write out the “Bcc:” header in this case.
Note this option only affects the sending of messages. Fcc'ed copies of a message will always
contain the “Bcc:” header if one exists.
write_inc
Type: number
Default: 10
When writing a mailbox, a message will be printed every $write_inc messages to indicate progress.
If set to 0, only a single message will be displayed before writing a mailbox.
Also see the $read_inc, $net_inc and $time_inc variables and the “tuning” section of the manual
for performance considerations.
SEE ALSO
iconv(1), iconv(3), mailcap(5), maildir(5), mbox(5), mutt(1), printf(3), regex(7), strftime(3)
The Mutt Manual
The Mutt home page: http://www.mutt.org/
AUTHOR
Michael Elkins, and others. Use <mutt-dev@mutt.org> to contact the developers.
Unix January 2019 muttrc(5)