Provided by: ion-doc_3.2.1+dfsg-1.1_all 
NAME
zco - library for manipulating zero-copy objects
SYNOPSIS
#include "zco.h"
typedef enum
{
ZcoFileSource = 1,
ZcoSdrSource = 2,
ZcoZcoSource = 3
} ZcoMedium;
typedef void (*ZcoCallback);
[see description for available functions]
DESCRIPTION
"Zero-copy objects" (ZCOs) are abstract data access representations designed to minimize I/O in the
encapsulation of application source data within one or more layers of communication protocol structure.
ZCOs are constructed within the heap space of an SDR to which implementations of all layers of the stack
must have access. Each ZCO contains information enabling access to the source data objects, together
with (a) a linked list of zero or more "extents" that reference portions of these source data objects and
(b) linked lists of protocol header and trailer capsules that have been explicitly attached to the ZCO
since its creation. The concatenation of the headers (in ascending stack sequence), source data object
extents, and trailers (in descending stack sequence) is what is to be transmitted or has been received.
Each source data object may be either a file (identified by pathname stored in a "file reference" object
in SDR heap) or an array of bytes in SDR heap space (identified by SDR address). Each protocol header or
trailer capsule indicates the length and the address (within SDR heap space) of a single protocol header
or trailer at some layer of the stack. Note that for some purposes the source data object for a newly
added extent of a ZCO may be specified indirectly, by reference to an extent of an existing ZCO.
The extents of multiple ZCOs may reference the same files and/or SDR source data objects. The source
data objects are reference-counted to ensure that they are deleted automatically when (and only when) all
ZCO extents that reference them have been deleted.
Note that the safety of shared access to a ZCO is protected by the fact that the ZCO resides in SDR and
therefore cannot be modified other than in the course of an SDR transaction, which serializes access.
Moreover, extraction of data from a ZCO may entail the reading of file-based source data extents, which
may cause file progress to be updated in one or more file reference objects in the SDR heap. For this
reason, all ZCO "transmit" and "receive" functions must be performed within SDR transactions.
Note also that ZCO can more broadly be used as a general-purpose reference counting system for non-
volatile data objects, where a need for such a system is identified.
The total volume of file system space that may be occupied by file-sourced ZCO extents and the total
volume of SDR heap space that may be occupied by heap-sourced ZCO extents are system configuration
parameters that may be set by ZCO library functions. Those limits are enforced when extents are appended
to ZCOs: total ZCO file space occupancy and total ZCO heap occupancy are updated continuously as ZCOs are
created and destroyed, and the formation of a new extent is prohibited when the length of the extent
exceeds the difference between the applicable limit and the corresponding current occupancy total.
void zco_register_callback(ZcoCallback notify)
This function registers the "callback" function that the ZCO system will invoke every time a ZCO is
destroyed, making ZCO file and/or heap space available for the formation of new ZCO extents. This
mechanism can be used, for example, to notify tasks that are waiting for ZCO space to be made
available so that they can resume some communication protocol procedure.
void zco_unregister_callback( )
This function simply unregisters the currently registered callback function for ZCO destruction.
Object zco_create_file_ref(Sdr sdr, char *pathName, char *cleanupScript)
Creates and returns a new file reference object, which can be used as the source data extent location
for creating a ZCO whose source data object is the file identified by pathName. cleanupScript, if
not NULL, is invoked at the moment the last ZCO that cites this file reference is destroyed [normally
upon delivery either down to the "ZCO transition layer" of the protocol stack or up to a ZCO-capable
application]. A zero-length string is interpreted as implicit direction to delete the referenced
file when the file reference object is destroyed. Maximum length of cleanupScript is 255. Returns
SDR location of file reference object on success, 0 on any error.
Object zco_revise_file_ref(Sdr sdr, Object fileRef, char *pathName, char *cleanupScript)
Changes the pathName and cleanupScript of the indicated file reference. The new values of these
fields are validated as for zco_create_file_ref(). Returns 0 on success, -1 on any error.
char *zco_file_ref_path(Sdr sdr, Object fileRef, char *buffer, int buflen)
Retrieves the pathName associated with fileRef and stores it in buffer, truncating it to fit (as
indicated by buflen) and NULL-terminating it. On success, returns buffer; returns NULL on any error.
int zco_file_ref_xmit_eof(Sdr sdr, Object fileRef)
Returns 1 if the last octet of the referenced file (as determined at the time the file reference
object was created) has been read by ZCO via a reader with file offset tracking turned on. Otherwise
returns zero.
void zco_destroy_file_ref(Sdr sdr, Object fileRef)
If the file reference object residing at location fileRef within the indicated Sdr is no longer in
use (no longer referenced by any ZCO), destroys this file reference object immediately. Otherwise,
flags this file reference object for destruction as soon as the last reference to it is removed.
vast zco_get_file_occupancy(Sdr sdr)
Returns the total number of file system space bytes occupied by ZCOs created in this Sdr.
void zco_set_max_file_occupancy(Sdr sdr, vast occupancy)
Declares the total number of file system space bytes that may be occupied by ZCOs created in this
Sdr.
vast zco_get_max_file_occupancy(Sdr sdr)
Returns the total number of file system space bytes that may be occupied by ZCOs created in this Sdr.
int zco_enough_file_space(Sdr sdr, vast length)
Returns 1 if the total remaining file system space available for ZCOs in this Sdr is greater than
length. Returns 0 otherwise.
vast zco_get_heap_occupancy(Sdr sdr)
Returns the total number of SDR heap space bytes occupied by ZCOs created in this Sdr.
void zco_set_max_heap_occupancy(Sdr sdr, vast occupancy)
Declares the total number of SDR heap space bytes that may be occupied by ZCOs created in this Sdr.
vast zco_get_max_heap_occupancy(Sdr sdr)
Returns the total number of SDR heap space bytes that may be occupied by ZCOs created in this Sdr.
int zco_enough_heap_space(Sdr sdr, vast length)
Returns 1 if the total remaining SDR heap space available for ZCOs in this Sdr is greater than
length. Returns 0 otherwise.
Object zco_create(Sdr sdr, ZcoMedium firstExtentSourceMedium, Object firstExtentLocation, vast
firstExtentOffset, vast firstExtentLength)
Creates a new ZCO. firstExtentLocation and firstExtentLength must either both be zero (indicating
that zco_append_extent() will be used to insert the first source data extent later) or else both be
non-zero. If firstExtentLocation is non-zero, then (a) firstExtentLocation must be the SDR location
of a file reference object if firstExtentSourceMedium is ZcoFileSource and must otherwise be the SDR
location of the source data itself, and (b) firstExtentOffset indicates how many leading bytes of the
source data object should be skipped over when adding the initial source data extent to the new ZCO.
On success, returns the SDR location of the new ZCO. Returns 0 if there is insufficient ZCO space
for creation of the new ZCO; returns ((Object) -1) on any error.
int zco_append_extent(Sdr sdr, Object zco, ZcoMedium sourceMedium, Object location, vast offset, vast
length)
Appends the indicated source data extent to the indicated ZCO, as described for zco_create(). Both
the location and length of the source data must be non-zero. Returns length on success, 0 if there
is insufficient ZCO space for creation of the new source data extent, -1 on any error.
int zco_prepend_header(Sdr sdr, Object zco, char *header, vast length)
int zco_append_trailer(Sdr sdr, Object zco, char *trailer, vast length)
void zco_discard_first_header(Sdr sdr, Object zco)
void zco_discard_last_trailer(Sdr sdr, Object zco)
These functions attach and remove the ZCO's headers and trailers. header and trailer are assumed to
be arrays of octets, not necessarily text. Attaching a header or trailer causes it to be written to
the SDR. The prepend and append functions return 0 on success, -1 on any error.
void zco_destroy(Sdr sdr, Object zco)
Destroys the indicated Zco. This reduces the reference counts for all files and SDR objects
referenced in the ZCO's extents, resulting in the freeing of SDR objects and (optionally) the
deletion of files as those reference count drop to zero.
Object zco_clone(Sdr sdr, Object zco, vast offset, vast length)
Creates a new ZCO whose source data is a copy of a subset of the source data of the referenced ZCO.
Portions of the source data extents of the original ZCO are copied as necessary, but no header or
trailer capsules are copied. Returns SDR location of the new ZCO on success, 0 on any error.
vast zco_clone_source_data(Sdr sdr, Object toZco, Object fromZco, vast offset, vast length)
Appends to toZco a copy of a subset of the source data of fromZCO. Portions of the source data
extents of fromZCO are copied as necessary. Returns length on success, -1 on any error.
vast zco_length(Sdr sdr, Object zco)
Returns length of entire ZCO, including all headers and trailers and all source data extents. This
is the size of the object that would be formed by concatenating the text of all headers, trailers,
and source data extents into a single serialized object.
vast zco_source_data_length(Sdr sdr, Object zco)
Returns length of entire ZCO minus the lengths of all attached header and trailer capsules. This is
the size of the object that would be formed by concatenating the text of all source data extents
(including those that are presumed to contain header or trailer text attached elsewhere) into a
single serialized object.
void zco_start_transmitting(Object zco, ZcoReader *reader)
Used by underlying protocol layer to start extraction of an outbound ZCO's bytes (both from header
and trailer capsules and from source data extents) for "transmission" -- i.e., the copying of bytes
into a memory buffer for delivery to some non-ZCO-aware protocol implementation. Initializes reading
at the first byte of the total concatenated ZCO object. Populates reader, which is used to keep
track of "transmission" progress via this ZCO reference.
Note that this function can be called multiple times to restart reading at the start of the ZCO.
Note also that multiple ZcoReader objects may be used concurrently, by the same task or different
tasks, to advance through the ZCO independently.
void zco_track_file_offset(ZcoReader *reader)
Turns on file offset tracking for this reader.
vast zco_transmit(Sdr sdr, ZcoReader *reader, vast length, char *buffer)
Copies length as-yet-uncopied bytes of the total concatenated ZCO (referenced by reader) into buffer.
If buffer is NULL, skips over length bytes without copying. Returns the number of bytes copied (or
skipped) on success, 0 on any file access error, -1 on any other error.
void zco_start_receiving(Object zco, ZcoReader *reader)
Used by overlying protocol layer to start extraction of an inbound ZCO's bytes for "reception" --
i.e., the copying of bytes into a memory buffer for delivery to a protocol header parser, to a
protocol trailer parser, or to the ultimate recipient (application). Initializes reading of headers,
source data, and trailers at the first byte of the concatenated ZCO objects. Populates reader, which
is used to keep track of "reception" progress via this ZCO reference and is required.
vast zco_receive_headers(Sdr sdr, ZcoReader *reader, vast length, char *buffer)
Copies length as-yet-uncopied bytes of presumptive protocol header text from ZCO source data extents
into buffer. If buffer is NULL, skips over length bytes without copying. Returns number of bytes
copied (or skipped) on success, 0 on any file access error, -1 on any other error.
void zco_delimit_source(Sdr sdr, Object zco, vast offset, vast length)
Sets the computed offset and length of actual source data in the ZCO, thereby implicitly establishing
the total length of the ZCO's concatenated protocol headers as offset and the location of the ZCO's
innermost protocol trailer as the sum of offset and length. Offset and length are typically
determined from the information carried in received presumptive protocol header text.
vast zco_receive_source(Sdr sdr, ZcoReader *reader, vast length, char *buffer)
Copies length as-yet-uncopied bytes of source data from ZCO extents into buffer. If buffer is NULL,
skips over length bytes without copying. Returns number of bytes copied (or skipped) on success, 0
on any file access error, -1 on any other error.
vast zco_receive_trailers(Sdr sdr, ZcoReader *reader, vast length, char *buffer)
Copies length as-yet-uncopied bytes of trailer data from ZCO extents into buffer. If buffer is NULL,
skips over length bytes without copying. Returns number of bytes copied (or skipped) on success, 0
on any file access error, -1 on any other error.
void zco_strip(Sdr sdr, Object zco)
Deletes all source data extents that contain only header or trailer data and adjusts the offsets
and/or lengths of all remaining extents to exclude any known header or trailer data. This function
is useful when handling a ZCO that was received from an underlying protocol layer rather than from an
overlying application or protocol layer; use it before starting the transmission of the ZCO to
another node or before enqueuing it for reception by an overlying application or protocol layer.
SEE ALSO
sdr(3)
perl v5.24.1 2016-07-07 ici::doc::pod3::zco(3)