Ubuntu Manpage: sbcast - transmit a file to the nodes allocated to a Slurm job.

Provided by: slurm-client_21.08.5-2ubuntu1_amd64

NAME

       sbcast - transmit a file to the nodes allocated to a Slurm job.

SYNOPSIS

       sbcast [-CfFjpstvV] SOURCE DEST

DESCRIPTION

       sbcast is used to transmit a file to all nodes allocated to the currently active Slurm job.  This command
       should  only  be  executed  from within a Slurm batch job or within the shell spawned after a Slurm job's
       resource allocation.  SOURCE is the name of a file on  the  current  node.   DEST  should  be  the  fully
       qualified  pathname  for  the file copy to be created on each node.  If a fully qualified pathname is not
       provided, the file will be created in the directory specified in the  BcastParameters  parameter  in  the
       slurm.conf  file  (if available) otherwise it will be created in the current working directory from which
       the sbcast command is invoked.  DEST should be on a file system local to that node.  Note  that  parallel
       file  systems  may  provide better performance than sbcast can provide, although performance will vary by
       file size, degree of parallelism, and network type.

OPTIONS

-C, --compress[=library]
Compress the file being transmitted. The optional argument specifies the data compression library
to be used. Supported values are "lz4" (default) and "none". Some compression libraries may be
unavailable on some systems. The default compression library (and enabling compression itself)
may be set in the slurm.conf file using the BcastParameters option.

--exclude=<NONE|path1,...,pathN>
Comma-separated list of absolute directory paths to be excluded when autodetecting and
broadcasting executable shared object dependencies. If the keyword "NONE" is configured, no
directory paths will be excluded. The default value is that of slurm.conf BcastExclude and this
option overrides it. See also --send-libs.

-F, --fanout=<number>
Specify the fanout of messages used for file transfer. Maximum value is currently eight.

-f, --force
If the destination file already exists, replace it.

-j, --jobid=<jobID[.stepID]>
Specify the job ID to use with optional step ID. If run inside an allocation this is unneeded as
the job ID will read from the environment.

-p, --preserve
Preserves modification times, access times, and modes from the original file.

--send-libs[=yes|no]
If set to yes (or no argument), autodetect and broadcast the executable's shared object
dependencies to allocated compute nodes. The files are placed in a directory alongside the
executable. This overrides the default behavior configured in slurm.conf SbcastParameters
send_libs. See also --exclude.

-s, --size=<size>
Specify the block size used for file broadcast. The size can have a suffix of k or m for
kilobytes or megabytes respectively (defaults to bytes). This size subject to rounding and range
limits to maintain good performance. The default value is the file size or 8MB, whichever is
smaller. This value may need to be set on systems with very limited memory.

-t, --timeout=<seconds>
Specify the message timeout in seconds. The default value is MessageTimeout as reported by
"scontrol show config". Setting a higher value may be necessitated by relatively slow I/O
performance on the compute node disks.

-v, --verbose
Provide detailed event logging through program execution.

-V, --version
Print version information and exit.

PERFORMANCE

       Executing sbcast sends a remote procedure call to slurmctld. If enough calls from sbcast or  other  Slurm
       client  commands  that send remote procedure calls to the slurmctld daemon come in at once, it can result
       in a degradation of performance of the slurmctld daemon, possibly resulting in a denial of service.

       Do not run sbcast or other Slurm client commands that send remote procedure calls to slurmctld from loops
       in shell scripts or other programs. Ensure that programs limit calls to sbcast to the  minimum  necessary
       for the information you are trying to gather.

ENVIRONMENT VARIABLES

       Some  sbcast options may be set via environment variables.  These environment variables, along with their
       corresponding options, are  listed  below.  (Note:  Command  line  options  will  always  override  these
       settings.)

       SBCAST_COMPRESS     -C, --compress

       SBCAST_EXCLUDE      --exclude=<NONE|path1,...,pathN>

       SBCAST_FANOUT       -F number, --fanout=number

       SBCAST_FORCE        -f, --force

       SBCAST_SEND_LIBS    --send-libs[=yes|no]

       SBCAST_PRESERVE     -p, --preserve

       SBCAST_SIZE         -s size, --size=size

       SBCAST_TIMEOUT      -t seconds, --timeout=seconds

       SLURM_CONF          The location of the Slurm configuration file.

AUTHORIZATION

       When  using SlurmDBD, users who have an AdminLevel defined (Operator or Admin) are given the authority to
       invoke sbcast on other users jobs.

EXAMPLES

       Using a batch script, transmit local file my.prog to /tmp/my.proc on the local nodes and then execute it.

       $ cat my.job
       #!/bin/bash
       sbcast my.prog /tmp/my.prog
       srun /tmp/my.prog

       $ sbatch --nodes=8 my.job
       srun: jobid 12345 submitted

COPYING

       Copyright (C) 2006-2010 The Regents of the University of  California.   Produced  at  Lawrence  Livermore
       National Laboratory (cf, DISCLAIMER).
       Copyright (C) 2010-2021 SchedMD LLC.

       This    file    is    part    of    Slurm,   a   resource   management   program.    For   details,   see
       <https://slurm.schedmd.com/>.

       Slurm is free software; you can redistribute it and/or modify it under  the  terms  of  the  GNU  General
       Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
       option) any later version.

       Slurm  is  distributed  in  the  hope  that it will be useful, but WITHOUT ANY WARRANTY; without even the
       implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.   See  the  GNU  General  Public
       License for more details.