Provided by: linuxcnc-uspace_2.9.4-2ubuntu1_amd64 bug

NAME
       hm2_pci  -  LinuxCNC  HAL  driver  for  the  Mesa Electronics PCI-based Anything IO boards, with HostMot2
       firmware.


SYNOPSIS

       loadrt hm2_pci [config="str[,str...]"]

           config [default: ""]
                  HostMot2 config strings, described in the hostmot2(9) manpage.


DESCRIPTION
       hm2_pci is a device driver that interfaces Mesa's PCI and PC-104/Plus based Anything I/O boards (with the
       HostMot2 firmware) to the LinuxCNC HAL.

       The supported boards are: the 5i20, 5i21, 5i22, 5i23, 5i24, and 5i25 (all on PCI); the  4i65,  4i68,  and
       4i69 (on PC-104/Plus), and the 3x20 (using a 6i68 or 7i68 carrier card) and 6i25 (on PCI Express).

       The  driver  optionally  programs  the  board's  FPGA  with firmware when it registers the board with the
       hostmot2 driver.  The firmware to load  is  specified  in  the  config  modparam,  as  described  in  the
       hostmot2(9) manpage, in the config modparam section.


SEE ALSO
       hostmot2(9)


LICENSE
       GPL

LinuxCNC Documentation                             2008-05-13                                         HM2_PCI(9)