NAME

       comp - Two input comparator with hysteresis

SYNOPSIS

       loadrt comp [count=N|names=name1[,name2...]]

FUNCTIONS

       comp.N (requires a floating-point thread)
              Update the comparator

PINS

       comp.N.in0 float in
              Inverting input to the comparator

       comp.N.in1 float in
              Non-inverting input to the comparator

       comp.N.out bit out
              Normal output. True when in1 > in0 (see parameter hyst for details)

       comp.N.equal bit out
              Match output.  True when difference between in1 and in0 is less than hyst/2

PARAMETERS

       comp.N.hyst float rw (default: 0.0)
              Hysteresis of the comparator (default 0.0)

              With  zero  hysteresis,  the  output  is true when in1 > in0.  With nonzero hysteresis, the output
              switches on and off at two different values, separated by distance hyst around the point where in1
              = in0.  Keep in mind that floating point calculations are never absolute and it is wise to  always
              set hyst if you intend to use equal

AUTHOR

       Jeff Epler

LICENSE

       GPL

LinuxCNC Documentation                             2025-06-19                                            COMP(9)