NAME

       pmh7tool - read and write to pmh7 registers

SYNOPSIS

       pmh7tool [-d]
       pmh7tool [-r] <addr>
       pmh7tool [-w] <addr> <data>
       pmh7tool [-b | -c | -s] <addr> <bit>
       pmh7tool [-h]

DESCRIPTION

       Read and write to pmh7 registers at base address 0x15e0

   Attention!
       Writing  to  PMH7  registers is very dangerous, as you directly manipulate the power rails, enable lines,
       interrupt lines or something else of the device. Proceed with caution.

OPTIONS

       -h, --help:
              Print this help

       -d, --dump:
              Print registers

       -r, --read <addr>:
              Read from register at <addr>.

       -b, --read-bit <addr> <bit>
              Read bit from register at <addr>

       -w, --write <addr> <data>
              Write <data> to register at <addr>

       -c, --clear-bit <addr> <bit>
              Clear bit from register at <addr>

       -s, --set-bit <addr> <bit>
              Set bit at on register at <addr>

NOTES

       <addr> must be in the range of 0-0x1ff
       <data> must be in the range of 0-0xff
       <bit>  must be in the range of 0-7

AUTHORS

       coresystems GmbH.
       Man page written by Ahmad Khalifa.

                                                  November 2024                                      PMH7TOOL(8)