Provided by: makedumpfile_1.7.6-1_amd64 
NAME
makedumpfile - make a small dumpfile of kdump
SYNOPSIS
makedumpfile [OPTION] [-x VMLINUX|-i VMCOREINFO] VMCORE DUMPFILE
makedumpfile -F [OPTION] [-x VMLINUX|-i VMCOREINFO] VMCORE
makedumpfile [OPTION] -x VMLINUX [--config FILTERCONFIGFILE] [--eppic EPPICMACRO] VMCORE DUMPFILE
makedumpfile -R DUMPFILE
makedumpfile --split [OPTION] [-x VMLINUX|-i VMCOREINFO] VMCORE DUMPFILE1 DUMPFILE2 [DUMPFILE3 ..]
makedumpfile [OPTION] [-x VMLINUX|-i VMCOREINFO] --num-threads THREADNUM VMCORE DUMPFILE
makedumpfile --reassemble DUMPFILE1 DUMPFILE2 [DUMPFILE3 ..] DUMPFILE
makedumpfile -g VMCOREINFO -x VMLINUX
makedumpfile [OPTION] [--xen-syms XEN-SYMS|--xen-vmcoreinfo VMCOREINFO] VMCORE DUMPFILE
makedumpfile --dump-dmesg [--partial-dmesg] [-x VMLINUX|-i VMCOREINFO] VMCORE LOGFILE
makedumpfile [OPTION] -x VMLINUX --diskset=VMCORE1 --diskset=VMCORE2 [--diskset=VMCORE3 ..] DUMPFILE
makedumpfile -h
makedumpfile -v
DESCRIPTION
With kdump, the memory image of the first kernel (called "panicked kernel") can be taken as /proc/vmcore
while the second kernel (called "kdump kernel" or "capture kernel") is running. This document represents
/proc/vmcore as VMCORE. makedumpfile makes a small DUMPFILE by compressing dump data or by excluding
unnecessary pages for analysis, or both. makedumpfile needs the first kernel's debug information, so that
it can distinguish unnecessary pages by analyzing how the first kernel uses the memory. The information
can be taken from VMLINUX or VMCOREINFO.
makedumpfile can exclude the following types of pages while copying VMCORE to DUMPFILE, and a user can
choose which type of pages will be excluded.
- Pages filled with zero
- Cache pages without private flag (non-private cache)
- Cache pages with private flag (private cache)
- User process data pages
- Free pages
makedumpfile provides two DUMPFILE formats (the ELF format and the kdump-compressed format). By default,
makedumpfile makes a DUMPFILE in the kdump-compressed format. The kdump-compressed format is readable
only with the crash utility, and it can be smaller than the ELF format because of the compression
support. The ELF format is readable with GDB and the crash utility. If a user wants to use GDB, DUMPFILE
format has to be explicitly specified to be the ELF format.
Apart from the exclusion of unnecessary pages mentioned above, makedumpfile allows user to filter out
targeted kernel data. The filter config file can be used to specify kernel/module symbols and its members
that need to be filtered out through the erase command syntax. makedumpfile reads the filter config and
builds the list of memory addresses and its sizes after processing filter commands. The memory locations
that require to be filtered out are then poisoned with character 'X' (58 in Hex). Refer to
makedumpfile.conf(5) for file format.
Eppic macros can also be used to specify kernel symbols and its members that need to be filtered. Eppic
provides C semantics including language constructs such as conditional statements, logical and arithmetic
operators, functions, nested loops to traverse and erase kernel data. --eppic requires
eppic_makedumpfile.so and eppic library. eppic_makedumpfile.so can be built from makedumpfile source.
Refer to http://code.google.com/p/eppic/ to build eppic library libeppic.a and for more information on
writing eppic macros.
To analyze the first kernel's memory usage, makedumpfile can refer to VMCOREINFO instead of VMLINUX.
VMCOREINFO contains the first kernel's information (structure size, field offset, etc.), and VMCOREINFO
is small enough to be included into the second kernel's initrd.
If the second kernel is running on its initrd without mounting a root file system, makedumpfile cannot
refer to VMLINUX because the second kernel's initrd cannot include a large file like VMLINUX. To solve
the problem, makedumpfile makes VMCOREINFO beforehand, and it refers to VMCOREINFO instead of VMLINUX
while the second kernel is running.
VMCORE has contained VMCOREINFO since linux-2.6.24, and a user does not need to specify neither -x nor -i
option.
If the second kernel is running on its initrd without mounting any file system, a user needs to transport
the dump data to a remote host. To transport the dump data by SSH, makedumpfile outputs the dump data in
the intermediate format (the flattened format) to the standard output. By piping the output data to SSH,
a user can transport the dump data to a remote host. Note that analysis tools (crash utility before
version 5.1.2 or GDB) cannot read the flattened format directly, so on a remote host the received data in
the flattened format needs to be rearranged to a readable DUMPFILE format by makedumpfile (or
makedumpfile-R.pl).
makedumpfile can read a DUMPFILE in the kdump-compressed format instead of VMCORE and re-filter it. This
feature is useful in situation that users need to reduce the file size of DUMPFILE for sending it
somewhere by ftp/scp/etc. (If all of the page types, which are specified by a new dump_level, are
excluded from an original DUMPFILE already, a new DUMPFILE is the same as an original DUMPFILE.)
For example, makedumpfile can create a DUMPFILE of dump_level 31 from the one of dump_level 3 like the
following:
Example:
# makedumpfile -c -d 3 /proc/vmcore dumpfile.1
# makedumpfile -c -d 31 dumpfile.1 dumpfile.2
makedumpfile can read VMCORE(s) in three kinds of sadump formats: single partition format, diskset format
and media backup format, and can convert each of them into kdump-compressed format with filtering and
compression processing. Note that for VMCORE(s) created by sadump, you always need to pass VMLINUX with
-x option. Also, to pass multiple VMCOREs created on diskset configuration, you need to use --diskset
option.
OPTIONS
-c,-l,-p,-z
Compress dump data by the page using the following compression library respectively:
-c : zlib
-l : lzo
-p : snappy
-z : zstd
(-l, -p and -z option need USELZO=on, USESNAPPY=on and USEZSTD=on respectively when building
makedumpfile)
A user cannot specify this option with -E option, because the ELF format does not support
compressed data.
Example:
# makedumpfile -c -d 31 -x vmlinux /proc/vmcore dumpfile
-d dump_level
Specify the type of unnecessary page for analysis.
Pages of the specified type are not copied to DUMPFILE. The page type marked in the following
table is excluded. A user can specify multiple page types by setting the sum of each page type for
dump_level. The maximum of dump_level is 31. Note that a dump_level for Xen dump filtering is 0 or
1 on a machine other than x86_64. On a x86_64 machine, even 2 or bigger dump level will be
effective if you specify domain-0's vmlinux with -x option. Then the pages are excluded only from
domain-0.
If specifying multiple dump_levels with the delimiter ',', makedumpfile retries to create DUMPFILE
using the next dump_level when the size of a dumpfile exceeds the limit specified with '-L' or
when a "No space on device" error happens. For example, if dump_level is "11,31" and makedumpfile
fails with dump_level 11, makedumpfile retries with dump_level 31.
Example:
# makedumpfile -d 11 -x vmlinux /proc/vmcore dumpfile
# makedumpfile -d 11,31 -x vmlinux /proc/vmcore dumpfile
Base level:
dump_level consists of five bits, so there are five base levels to specify the type of unnecessary
page.
1 : Exclude the pages filled with zero.
2 : Exclude the non-private cache pages.
4 : Exclude all cache pages.
8 : Exclude the user process data pages.
16 : Exclude the free pages.
Here is the all combinations of the bits.
| |non- | | |
dump | zero |private|private| user | free
level | page |cache |cache | data | page
-------+------+-------+-------+------+------
0 | | | | |
1 | X | | | |
2 | | X | | |
3 | X | X | | |
4 | | X | X | |
5 | X | X | X | |
6 | | X | X | |
7 | X | X | X | |
8 | | | | X |
9 | X | | | X |
10 | | X | | X |
11 | X | X | | X |
12 | | X | X | X |
13 | X | X | X | X |
14 | | X | X | X |
15 | X | X | X | X |
16 | | | | | X
17 | X | | | | X
18 | | X | | | X
19 | X | X | | | X
20 | | X | X | | X
21 | X | X | X | | X
22 | | X | X | | X
23 | X | X | X | | X
24 | | | | X | X
25 | X | | | X | X
26 | | X | | X | X
27 | X | X | | X | X
28 | | X | X | X | X
29 | X | X | X | X | X
30 | | X | X | X | X
31 | X | X | X | X | X
-L SIZE
Limit the size of the output file to SIZE bytes. An incomplete DUMPFILE or LOGFILE is written if
the size would otherwise exceed SIZE.
-E Create DUMPFILE in the ELF format.
This option cannot be specified with the -c, -l or -p options, because the ELF format does not
support compressed data.
Example:
# makedumpfile -E -d 31 -x vmlinux /proc/vmcore dumpfile
-f Force existing DUMPFILE to be overwritten and mem-usage to work with older kernel as well.
Example:
# makedumpfile -f -d 31 -x vmlinux /proc/vmcore dumpfile
This command overwrites DUMPFILE even if it already exists.
# makedumpfile -f --mem-usage /proc/kcore
Kernel version lesser than v4.11 will not work with --mem-usage functionality until it has been
patched with upstream commit 464920104bf7. Therefore if you have patched your older kernel then
use -f.
-x VMLINUX
Specify the first kernel's VMLINUX with debug information to analyze the first kernel's memory
usage.
This option is necessary if VMCORE does not contain VMCOREINFO, [-i VMCOREINFO] is not specified,
and dump_level is 2 or more.
The page size of the first kernel and the second kernel should match.
Example:
# makedumpfile -d 31 -x vmlinux /proc/vmcore dumpfile
-i VMCOREINFO
Specify VMCOREINFO instead of VMLINUX for analyzing the first kernel's memory usage.
VMCOREINFO should be made beforehand by makedumpfile with -g option, and it contains the first
kernel's information.
This option is necessary if VMCORE does not contain VMCOREINFO, [-x VMLINUX] is not specified, and
dump_level is 2 or more.
Example:
# makedumpfile -d 31 -i vmcoreinfo /proc/vmcore dumpfile
-g VMCOREINFO
Generate VMCOREINFO from the first kernel's VMLINUX with debug information.
VMCOREINFO must be generated on the system that is running the first kernel. With -i option, a
user can specify VMCOREINFO generated on the other system that is running the same first kernel.
[-x VMLINUX] must be specified.
Example:
# makedumpfile -g vmcoreinfo -x vmlinux
--config FILTERCONFIGFILE
Used in conjunction with -x VMLINUX option, to specify the filter config file FILTERCONFIGFILE
that contains erase commands to filter out desired kernel data from vmcore while creating
DUMPFILE. For filter command syntax please refer to makedumpfile.conf(5).
--eppic EPPICMACRO
Used in conjunction with -x VMLINUX option, to specify the eppic macro file that contains filter
rules or directory that contains eppic macro files to filter out desired kernel data from vmcore
while creating DUMPFILE. When directory is specified, all the eppic macros in the directory are
processed.
-F Output the dump data in the flattened format to the standard output for transporting the dump data
by SSH.
Analysis tools (crash utility before version 5.1.2 or GDB) cannot read the flattened format
directly. For analysis, the dump data in the flattened format should be rearranged to a normal
DUMPFILE (readable with analysis tools) by -R option. By which option is specified with -F option,
the format of the rearranged DUMPFILE is fixed. In other words, it is impossible to specify the
DUMPFILE format when the dump data is rearranged with -R option. If specifying -E option with -F
option, the format of the rearranged DUMPFILE is the ELF format. Otherwise, it is the
kdump-compressed format. All the messages are output to standard error output by -F option because
standard output is used for the dump data.
Example:
# makedumpfile -F -c -d 31 -x vmlinux /proc/vmcore \
| ssh user@host "cat > dumpfile.tmp"
# makedumpfile -F -c -d 31 -x vmlinux /proc/vmcore \
| ssh user@host "makedumpfile -R dumpfile"
# makedumpfile -F -E -d 31 -i vmcoreinfo /proc/vmcore \
| ssh user@host "makedumpfile -R dumpfile"
# makedumpfile -F -E --xen-vmcoreinfo VMCOREINFO /proc/vmcore \
| ssh user@host "makedumpfile -R dumpfile"
-R Rearrange the dump data in the flattened format from the standard input to a normal DUMPFILE
(readable with analysis tools).
Example:
# makedumpfile -R dumpfile < dumpfile.tmp
# makedumpfile -F -d 31 -x vmlinux /proc/vmcore \
| ssh user@host "makedumpfile -R dumpfile"
Instead of using -R option, a perl script "makedumpfile-R.pl" rearranges the dump data in the
flattened format to a normal DUMPFILE, too. The perl script does not depend on architecture, and
most systems have perl command. Even if a remote host does not have makedumpfile, it is possible
to rearrange the dump data in the flattened format to a readable DUMPFILE on a remote host by
running this script.
Example:
# makedumpfile -F -d 31 -x vmlinux /proc/vmcore \
| ssh user@host "makedumpfile-R.pl dumpfile"
--split
Split the dump data to multiple DUMPFILEs in parallel. If specifying DUMPFILEs on different
storage devices, a device can share I/O load with other devices and it reduces time for saving the
dump data. The file size of each DUMPFILE is smaller than the system memory size which is divided
by the number of DUMPFILEs. This feature supports only the kdump-compressed format.
Example:
# makedumpfile --split -d 31 -x vmlinux /proc/vmcore dumpfile1 dumpfile2
--num-threads THREADNUM
Using multiple threads to read and compress data of each page in parallel. And it will reduces
time for saving DUMPFILE. Note that if the usable cpu number is less than the thread number, it
may lead to great performance degradation. This feature only supports creating DUMPFILE in
kdump-comressed format from VMCORE in kdump-compressed format or elf format.
Example:
# makedumpfile -d 31 --num-threads 4 /proc/vmcore dumpfile
--reassemble
Reassemble multiple DUMPFILEs, which are created by --split option, into one DUMPFILE. dumpfile1
and dumpfile2 are reassembled into dumpfile on the following example.
Example:
# makedumpfile --reassemble dumpfile1 dumpfile2 dumpfile
-b <order>
Cache 2^order pages in ram when generating DUMPFILE before writing to output. The default value
is 4.
--cyclic-buffer buffer_size
Specify the buffer size in kilo bytes for bitmap data. Filtering processing will be divided into
multi cycles to fix the memory consumption, the number of cycles is represented as:
num_of_cycles = system_memory / (buffer_size * 1024 * bit_per_bytes * page_size )
The lesser number of cycles, the faster working speed is expected. By default, buffer_size will
be calculated automatically depending on system memory size, so ordinary users don't need to
specify this option.
Example:
# makedumpfile --cyclic-buffer 1024 -d 31 -x vmlinux /proc/vmcore dumpfile
--splitblock-size splitblock_size
Specify the splitblock size in kilo bytes for analysis with --split. If --splitblock N is
specified, difference of each splitted dumpfile size is at most N kilo bytes.
Example:
# makedumpfile --splitblock-size 1024 -d 31 -x vmlinux --split /proc/vmcore dumpfile1 dumpfile2
--work-dir
Specify the working directory for the temporary bitmap file. If this option isn't specified, the
bitmap will be saved on memory. Filtering processing has to do 2 pass scanning to fix the memory
consumption, but it can be avoided by using working directory on file system. So if you specify
this option, the filtering speed may be bit faster.
Example:
# makedumpfile --work-dir /tmp -d 31 -x vmlinux /proc/vmcore dumpfile
--non-mmap
Never use mmap(2) to read VMCORE even if it supports mmap(2). Generally, reading VMCORE with
mmap(2) is faster than without it, so ordinary users don't need to specify this option. This
option is mainly for debugging.
Example:
# makedumpfile --non-mmap -d 31 -x vmlinux /proc/vmcore dumpfile
--xen-syms XEN-SYMS
Specify the XEN-SYMS with debug information to analyze the xen's memory usage. This option
extracts the part of xen and domain-0.
Example:
# makedumpfile -E --xen-syms xen-syms /proc/vmcore dumpfile
--xen-vmcoreinfo VMCOREINFO
Specify VMCOREINFO instead of XEN-SYMS for analyzing the xen's memory usage.
VMCOREINFO should be made beforehand by makedumpfile with -g option, and it contains the xen's
information.
Example:
# makedumpfile -E --xen-vmcoreinfo VMCOREINFO /proc/vmcore dumpfile
-X Exclude all the user domain pages from Xen kdump's VMCORE, and extracts the part of xen and
domain-0. If VMCORE contains VMCOREINFO for Xen, it is not necessary to specify --xen-syms and
--xen-vmcoreinfo.
Example:
# makedumpfile -E -X /proc/vmcore dumpfile
--xen_phys_start xen_phys_start_address
This option is only for x86_64. Specify the xen_phys_start_address, if the xen code/data is
relocatable and VMCORE does not contain xen_phys_start_address in the CRASHINFO.
xen_phys_start_address can be taken from the line of "Hypervisor code and data" in /proc/iomem.
For example, specify 0xcee00000 as xen_phys_start_address if /proc/iomem is the following:
-------------------------------------------------------
# cat /proc/iomem
...
cee00000-cfd99999 : Hypervisor code and data
...
-------------------------------------------------------
Example:
# makedumpfile -E -X --xen_phys_start 0xcee00000 /proc/vmcore dumpfile
--message-level message_level
Specify the message types.
Users can restrict outputs printed by specifying message_level with this option. The message type
marked with an X in the following table is printed. For example, according to the table,
specifying 7 as message_level means progress indicator, common message, and error message are
printed, and this is a default value. Note that the maximum value of message_level is 31.
message | progress | common | error | debug | report
level | indicator| message | message | message | message
---------+----------+---------+---------+---------+---------
0 | | | | |
1 | X | | | |
2 | | X | | |
3 | X | X | | |
4 | | | X | |
5 | X | | X | |
6 | | X | X | |
* 7 | X | X | X | |
8 | | | | X |
9 | X | | | X |
10 | | X | | X |
11 | X | X | | X |
12 | | | X | X |
13 | X | | X | X |
14 | | X | X | X |
15 | X | X | X | X |
16 | | | | | X
17 | X | | | | X
18 | | X | | | X
19 | X | X | | | X
20 | | | X | | X
21 | X | | X | | X
22 | | X | X | | X
23 | X | X | X | | X
24 | | | | X | X
25 | X | | | X | X
26 | | X | | X | X
27 | X | X | | X | X
28 | | | X | X | X
29 | X | | X | X | X
30 | | X | X | X | X
31 | X | X | X | X | X
--vtop virtual_address
This option is useful, when user debugs the translation problem of virtual address. If specifing
virtual_address, its physical address is printed. It makes debugging easy by comparing the output
of this option with the one of "vtop" subcommand of the crash utility. "--vtop" option only
prints the translation output, and it does not affect the dumpfile creation.
--dump-dmesg
This option overrides the normal behavior of makedumpfile. Instead of compressing and filtering a
VMCORE to make it smaller, it simply extracts the dmesg log from a VMCORE and writes it to the
specified LOGFILE. If a VMCORE does not contain VMCOREINFO for dmesg, it is necessary to specfiy
[-x VMLINUX] or [-i VMCOREINFO].
Example:
# makedumpfile --dump-dmesg /proc/vmcore dmesgfile
# makedumpfile --dump-dmesg -x vmlinux /proc/vmcore dmesgfile
--partial-dmesg
This option will make --dump-dmesg extract only dmesg logs since that buffer was last cleared on
the crashed kernel, through "dmesg --clear" for example.
--mem-usage
This option is currently supported on x86_64, arm64, ppc64 and s390x. This option is used to show
the page numbers of current system in different use. It should be executed in 1st kernel. By the
help of this, user can know how many pages is dumpable when different dump_level is specified. It
analyzes the 'System Ram' and 'kernel text' program segment of /proc/kcore excluding the
crashkernel range, then calculates the page number of different kind per vmcoreinfo. So currently
/proc/kcore need be specified explicitly.
Example:
# makedumpfile --mem-usage /proc/kcore
--diskset=VMCORE
Specify multiple VMCOREs created on sadump diskset configuration the same number of times as the
number of VMCOREs in increasing order from left to right. VMCOREs are assembled into a single
DUMPFILE.
Example:
# makedumpfile -x vmlinux --diskset=vmcore1 --diskset=vmcore2 dumpfile
-D Print debugging message.
-h (--help)
Show help message and LZO/snappy support status (enabled/disabled).
-v Show the version of makedumpfile.
--check-params
Only check whether the command-line parameters are valid or not, and exit. Preferable to be given
as the first parameter.
--dry-run
Do not write the output dump file while still performing operations specified by other options.
This option cannot be used with the --dump-dmesg, --reassemble and -g options.
--show-stats
Display report messages. This is an alternative to enabling bit 4 in the level provided to
--message-level.
ENVIRONMENT VARIABLES
TMPDIR This environment variable is used in 1st kernel environment for a temporary memory bitmap file.
If your machine has a lots of memory and you use small tmpfs on /tmp, makedumpfile can fail for a
little memory because makedumpfile makes a very large temporary memory bitmap file in this case.
To avoid this failure, you should specify --work-dir option to use file system on storage for the
bitmap file.
DIAGNOSTICS
makedumpfile exits with the following value.
0 : makedumpfile succeeded.
1 : makedumpfile failed without the following reasons.
2 : makedumpfile failed due to the different version between VMLINUX and VMCORE.
AUTHORS
Written by Masaki Tachibana, and Ken'ichi Ohmichi.
SEE ALSO
crash(8), gdb(1), kexec(8), makedumpfile.conf(5)
makedumpfile v1.7.6 23 Oct 2024 MAKEDUMPFILE(8)