NAME

       ipmiutil_health- show IPMI health

SYNOPSIS

       ipmiutil health [-ifhglmnopqsx -N node -U user -P/-R pswd -EFJTVY]

DESCRIPTION

       ipmiutil health is a program that uses IPMI commands to show the health of the BMC.  This utility can use
       either  the /dev/ipmi0 driver from OpenIPMI, the /dev/imb driver from Intel, the /dev/ipmikcs driver from
       valinux, direct user-space IOs, or the IPMI LAN interface if -N.

OPTIONS

       Command line options are described below.

       -c     Show canonical, delimited output.

       -f     Show the FRUSDR version also.

       -g     Show the IPMI GUID of this system.  The GUID is a read-only unique identifier.

       -h     Check the health of the HotSwap Controller also.

       -l     Show the IPMI LAN channel statistics also.

       -m 002000
              Target a specific MC (e.g. bus 00, sa 20, lun 00).  This could be used for  PICMG  or  ATCA  blade
              systems.   The trailing character, if present, indicates SMI addressing if 's', or IPMB addressing
              if 'i' or not present.

       -n string
              Set the System Name to this string in the IPMI System Information.

       -o string
              Set the Primary Operating System to this string in the IPMI System Information.

       -p 1   Set the chassis Power restore policy, governing the desired behavior when power was  lost  and  is
              restored.  Values: 0 = stay off, 1 = last state, 2 = always on.

       -q string
              Set the Secondary Operating System to this string in the IPMI System Information.

       -s     Show the IPMI Session information also.

       -x     Causes extra debug messages to be displayed.

       -N nodename
              Nodename  or  IP  address  of  the  remote  target  system.   If a nodename is specified, IPMI LAN
              interface is used.  Otherwise the local system management interface is used.

       -P/-R rmt_pswd
              Remote password for the nodename given.  The default is a null password.

       -U rmt_user
              Remote username for the nodename given.  The default is a null username.

       -E     Use the remote password from Environment variable IPMI_PASSWORD.

       -F drv_t
              Force the driver type to one of the followng: imb, va, open, gnu, landesk, lan, lan2, lan2i,  kcs,
              smb.   Note  that  lan2i means lan2 with intelplus.  The default is to detect any available driver
              type and use it.

       -J     Use  the  specified  LanPlus  cipher  suite  (0  thru  17):  0=none/none/none,   1=sha1/none/none,
              2=sha1/sha1/none,  3=sha1/sha1/cbc128, 4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none,
              ... 14=md5/md5/xrc4_40.  Default is 3.

       -T     Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5, 4=Straight Password, 5=OEM.

       -V     Use a specified IPMI LAN privilege  level.  1=Callback  level,  2=User  level,  3=Operator  level,
              4=Administrator level (default), 5=OEM level.

       -Y     Yes, do prompt the user for the IPMI LAN remote password.  Alternatives for the password are -E or
              -P.

SEE ALSO

       ipmiutil(8)  ialarms(8) iconfig(8) icmd(8) idiscover(8) ievents(8) ifru(8) igetevent(8) ilan(8) ireset(8)
       isel(8) isensor(8) iserial(8) isol(8) iwdt(8)

WARNINGS

       See http://ipmiutil.sourceforge.net/ for the latest version of ipmiutil and any bug fix list.

COPYRIGHT

       Copyright (C) 2009  Kontron America, Inc.

       See the file COPYING in the distribution for more details regarding redistribution.

       This utility is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.

AUTHOR

       Andy Cress <arcress at users.sourceforge.net>

                                            Version 1.1: 17 Feb 2010                                  IHEALTH(8)