Provided by: dkms_3.0.11-1ubuntu15_all 
NAME
dkms - Dynamic Kernel Module Support
SYNOPSIS
dkms [action] [options] [module/module-version] [/path/to/source-tree] [/path/to/tarball.tar]
[/path/to/driver.rpm]
DESCRIPTION
dkms is a framework which allows kernel modules to be dynamically built for each kernel on your system in
a simplified and organized fashion.
ACTIONS
add [module/module-version|/path/to/source-tree|/path/to/tarball.tar]
Adds a module/module-version combination to the tree for builds and installs. If
module/module-version, -m module/module-version, or -m module -v module-version are passed as
options, this command requires source in /usr/src/<module>-<module-version>/ as well as a properly
formatted dkms.conf file. If /path/to/source-tree is passed as an option, and source-tree contains a
dkms.conf file, it will copy /path/to/source-tree to /usr/src/module-module-version. If
/path/to/tarball.tar is passed, this command behaves like the ldtarball command.
remove [module/module-version] [-k kernel/arch] [--all]
Removes a module/version or module/version/kernel/arch combination from the tree. If the module is
currently installed, it first uninstalls it and if applicable, will replace it with its
original_module. Use the --all option in order to remove all instances for every kernel at once.
build [module/module-version] [-k kernel/arch] [--force]
Builds the specified module/version combo for the specified kernel/arch. If the -k option is not
specified it builds for the currently running kernel and arch. All builds occur in the directory
/var/lib/dkms/<module>/<module-version>/build/. If the module/module-version combo has not been
added, dkms will try to add it, and in that case build can take the same arguments that add can. If
the module is already built, it will not be rebuilt again by default, and the --force option should
be used to override this.
unbuild [module/module-version] [-k kernel/arch] [--all]
Undoes the build for a module/version or module/version/kernel/arch combination from the tree. If the
module is currently installed, it first uninstalls it and if applicable, will replace it with its
original_module. Finally all binary kernel modules are removed. Use the --all option in order to
remove all instances for every kernel at once.
install [module/module-version] [-k kernel/arch] [--force] [/path/to/driver.rpm]
Installs a built module/version combo onto the kernel it was built for. If the kernel option is not
specified it assumes the currently running kernel. If the module has not been built, dkms will try
to build it. If the module has not been added, dkms will try to add it. In both cases, the install
command can then take the same arguments as the build or add commands. If the module is already
installed, it will not be reinstalled again by default, and the --force option should be used to
override this. If you pass a .rpm file, dkms will try to install that file with rpm -Uvh, and it
will perform an autoinstall action to be sure that everything is built for your kernel if the RPM
installed successfully.
uninstall [module/module-version] [-k kernel/arch] [--all]
Uninstalls an installed module/module-version combo from the kernel/arch passed in the -k option, or
the current kernel if the -k option was not passed. Use the --all option in order to uninstall all
instances for every kernel at once. After uninstall completion, the driver will be left in the built
state. To completely remove a driver, the remove action should be utilized.
match [--templatekernel kernel/arch] [-k kernel/arch]
Match installs modules onto the specified kernel by looking at the configuration of the specified
templatekernel. Every module that is installed on the templatekernel within dkms is then installed
on that specified kernel.
mktarball [module/module-version] [-k kernel/arch] [--archive /path/to/tarball.tar] [--source-only]
[--binaries-only]
Creates a tarball archive for the specified module/version of all files in the DKMS tree for that
module/version combination. This includes the source and any built modules for kernels in the tree
(as specified). Otherwise, you can specify a singular kernel to archive only, or multiple kernels to
archive (-k kernel1/arch1 -k kernel2/arch2). Optionally, you can use --archive to specify the file
that you would like to save this tarball to. You can also specify --binaries-only if you want the
resultant tarball not to include the module source. Likewise, --source-only can be used to specify
that no prebuilt binaries should be included in the tarball. In general, mktarball is great for
systems management purposes as you can build your driver on just one system and then use ldtarball on
all of your other systems to get the same built modules loaded without having to wait for anything to
compile.
ldtarball [/path/to/tarball.tar] [--force]
This takes a tarball made from the mktarball command and loads it into your DKMS tree. This will
leave any newly added modules in the built state and dkms install should then be called to install
any of them. If files already exist where ldtarball is attempting to place them, it will warn and not
copy over them. The --force option should be used to override this.
status [module/module-version] [-k kernel/arch]
Returns the current status of modules, versions and kernels within the tree as well as whether they
have been added, built or installed. Status can be shown for just a certain module, a certain
kernel, a module/version combination or a module/version/kernel combination.
autoinstall
Attempt to install the latest revision of all modules that have been installed for other kernel
revisions. dkms_autoinstaller is a stub that uses this action to perform its work.
OPTIONS
-m <module>/<module-version>
The name of the module and module version you want to operate on. The -m part of this option is
optional, and can be omitted in virtually all circumstances.
-v <module-version>
The version of the module to execute the specified action upon. This option only has to be
specified if you pass a -m option without a <module-version> component of its own.
-k <kernel-version>/<arch>
The kernel and arch to perform the action upon. You can specify multiple kernel version/arch pairs
on the command line by repeating the -k argument with a different kernel version and arch.
However, not all actions support multiple kernel versions (it will error out in this case). The
arch part can be omitted, and DKMS will assume you want it to be the arch of the currently running
system.
-a, --arch
The system architecture to perform the action upon. It is optional if you pass it as part of the
-k option. If not specified, it assumes the arch of the currently running system (`uname -m`). You
can specify multiple arch parameters on the same command line by repeating the -a argument with a
different arch name. When multiple architectures are specified, there must be a 1:1 relationship
between -k arguments to -a arguments. DKMS will then assume the first -a argument aligns with the
first -k kernel and so on for the second, third, etc.
For example, if you were to specify: -k kernel1 -k kernel2 -a i386 -k kernel3 -a i686 -a x86_64,
DKMS would process this as: kernel1-i386, kernel2-i686, kernel3-x86_64.
-q, --quiet
Quiet.
-V, --version
Prints the currently installed version of dkms and exits.
-c <dkms.conf-location>
The location of the dkms.conf file. This is needed for the add action and if not specified, it is
assumed to be located in /usr/src/<module>-<module-version>/. See below for more information on
the format of dkms.conf.
--config <kernel-.config-location>
During a build this option is used to specify an alternate location for the kernel .config file
which was used to compile that kernel. Normally, dkms uses the Red Hat standard location and
config filenames located in /usr/src/linux-<kernel>/configs/. If the config for the kernel that
you are building a module for is not located here or does not have the expected name in this
location, you will need to tell dkms where the necessary .config can be found so that your kernel
can be properly prepared for the module build.
--archive <tarball-location>
This option is used during a ldtarball action to specify the location of the tarball you wish to
load into your DKMS tree. You only have to specify the --archive part of this option if
<tarball-location> does not already exist as a file.
--templatekernel <kernel-version>
This option is required for the action: match. Match will look at the templatekernel specified
and install all of the same module/version combinations on the other kernel.
--force
This option can be used in conjunction with ldtarball to force copying over of extant files.
--binaries-only
This option can be used in conjunction with mktarball in order to create a DKMS tarball which does
not contain the source for the module within it. This can be helpful in reducing the size of the
tarball if you know that the system which this tarball will be loaded upon already has the source
installed. In order to load a tarball made as binaries-only you must have the module source in
that systems DKMS tree. If you do not, DKMS will refuse to load a binaries-only tarball.
--source-only
This option can be used in conjunction with mktarball but do not want the tarball you create to
have any prebuilt modules within it, passing this option will keep its internal DKMS tarball from
containing any prebuilt modules.
--all This option can be used to automatically specify all relevant kernels/arches for a module/module-
version. This can be used for things like remove, unbuild and uninstall. This saves the trouble of
having to actually specify -k kernel1 -a arch1 -k kernel2 -a arch2 for every kernel you have built
your module for.
--no-depmod
This option prevents DKMS from running the depmod command during install and uninstall which will
avoid (re)calculating module dependencies and thereby save time.
--modprobe-on-install
This option executes modprobe on the modules upon successful installation.
--kernelsourcedir <kernel-source-directory-location>
Using this option you can specify the location of your kernel source directory. Most likely you
will not need to set this if your kernel source is accessible via
/lib/modules/$kernel_version/build.
--directive <"cli-directive=cli-value">
Using this option, you can specify additional directives from the command line. The --directive
option can be used multiple times on the same command-line to specify multiple additional command
line directives.
--rpm_safe_upgrade
This flag should be used when packaging DKMS enabled modules in RPMs. It should be specified
during both the add and remove actions in the RPM spec to ensure that DKMS and RPM behave
correctly in all scenarios when upgrading between various versions of a dkms enabled module RPM
package.
--dkmstree path/to/place
Provides a destination tree for building and installing modules to. Useful in cases that you don't
want to contaminate a system when using solely for building.
--sourcetree path/to/place
Provides a location to build a DKMS package from. Useful for systems that you may not have root
access, but would still like to be able to build DKMS packages.
--installtree path/to/place
Provides a location to place modules when a dkms install command is issued.
-j number
Run no more than number jobs in parallel; see the -j option of make(1). Defaults to the number of
CPUs in the system, detected by nproc(1). Specify 0 to impose no limit on the number of parallel
jobs.
ORIGINAL MODULES
During the first install of a module for a <kernelversion>, dkms will search /lib/modules/<kernelversion>
for a pre-existing module of the same name. If one is found, it will automatically be saved as an
"original_module" so that if the newer module is later removed, dkms will put the original module back in
its place. Currently, DKMS searches for these original modules with first preference going to modules
located in /lib/modules/<kernelversion>/updates/ followed by $DEST_MODULE_LOCATION (as specified in
dkms.conf ). If one cannot be found in either location, a find will be used to locate one for that
kernel. If none are found, then during a later uninstall, your kernel will not have that module
replaced.
If more than one is found, then the first one located (by preference indicated above) will be considered
the "original_module". As well, all copies of the same-named module will be removed from your kernel tree
and placed into /var/lib/dkms/<module>/original_module/$kernelver/collisions so that they can be
*manually* accessible later. DKMS will never actually do anything with the modules found underneath the
/collisions directory, and they will be stored there until you manually delete them.
DKMS.CONF
When performing an add, a proper dkms.conf file must be found. A properly formatted conf file is
essential for communicating to dkms how and where the module should be installed. While not all the
directives are required, providing as many as possible helps to limit any ambiguity. Note that the
dkms.conf is really only a shell-script of variable definitions which are then sourced in by the dkms
executable (of the format, DIRECTIVE="directive text goes here"). As well, the directives are
case-sensitive and should be given in ALL CAPS.
It is important to understand that many of the DKMS directives are arrays whose index values are tied
together. These array associations can be considered families, and there are currently three such
families of directive arrays. MAKE[#] and MAKE_MATCH[#] make up one family. PATCH[#] and PATCH_MATCH[#]
make up the second family. The third and largest family consists of BUILT_MODULE_NAME[#],
BUILT_MODULE_LOCATION[#], DEST_MODULE_NAME[#], DEST_MODULE_LOCATION[#] and STRIP[#]. When indexing these
arrays when creating your dkms.conf, each family should start at index value 0.
PACKAGE_NAME=
This directive is used to give the name associated with the entire package of modules. This is the
same name that is used with the -m option when building, adding, etc. and may not necessarily be
the same as the MODULE_NAME. This directive must be present in every dkms.conf.
PACKAGE_VERSION=
This directive is used to give the version associated with the entire package of modules being
installed within that dkms package. This directive must be present in every dkms.conf.
BUILT_MODULE_NAME[#]=
This directive gives the name of the module just after it is built. If your DKMS module package
contains more than one module to install, this is a required directive for all of the modules.
This directive should explicitly not contain any trailing ".o" or ".ko". Note that for each
module within a dkms package, the numeric value of # must be the same for each of
BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME and DEST_MODULE_LOCATION and that the
numbering should start at 0 (eg. BUILT_MODULE_NAME[0]="qla2200" BUILT_MODULE_NAME[1]="qla2300").
BUILT_MODULE_LOCATION[#]=
This directive tells DKMS where to find your built module after it has been built. This pathname
should be given relative to the root directory of your source files (where your dkms.conf file can
be found). If unset, DKMS expects to find your BUILT_MODULE_NAME[#] in the root directory of your
source files. Note that for each module within a dkms package, the numeric value of # must be the
same for each of BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME and
DEST_MODULE_LOCATION and that the numbering should start at 0 (eg.
BUILT_MODULE_LOCATION[0]="some/dir/" BUILT_MODULE_LOCATION[1]="other/dir/").
DEST_MODULE_NAME[#]=
This directive can be used to specify the name of the module as it should be installed. This will
rename the module from BUILT_MODULE_NAME[#] to DEST_MODULE_NAME[#]. This directive should
explicitly not contain any trailing ".o" or ".ko". If unset, it is assumed to be the same value as
BUILT_MODULE_NAME[#]. Note that for each module within a dkms package, the numeric value of #
must be the same for each of BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME and
DEST_MODULE_LOCATION and that the numbering should start at 0 (eg.
DEST_MODULE_NAME[0]="qla2200_6x" DEST_MODULE_NAME[1]="qla2300_6x").
DEST_MODULE_LOCATION[#]=
This directive specifies the destination where a module should be installed to, once compiled. It
also is used for finding original_modules. This is a required directive, except as noted below.
This directive must start with the text "/kernel" which is in reference to
/lib/modules/<kernelversion>/kernel. Note that for each module within a dkms package, the numeric
value of # must be the same for each of BUILT_MODULE_NAME, BUILT_MODULE_LOCATION, DEST_MODULE_NAME
and DEST_MODULE_LOCATION and that the numbering should start at 0 (eg.
DEST_MODULE_LOCATION[0]="/kernel/drivers/something/"
DEST_MODULE_LOCATION[1]="/kernel/drivers/other/").
DEST_MODULE_LOCATION is ignored on Fedora and Red Hat Enterprise Linux, Novell SuSE Linux
Enterprise Server 10 and higher, Novell SuSE Linux 10.0 and higher, and Ubuntu. Instead, the
proper distribution-specific directory is used.
STRIP[#]=
By default strip is considered to be "yes". If set to "no", DKMS will not run strip -g against
your built module to remove debug symbols from it. STRIP[0] is used as the default for any unset
entries in the STRIP array.
MAKE[#]=
The MAKE directive array tells DKMS which make command should be used for building your module.
The default make command should be put into MAKE[0]. Other entries in the MAKE array will only be
used if their corresponding entry in MAKE_MATCH[#] matches, as a regular expression (using grep
-E), the kernel that the module is being built for. Note that if no value is placed in
MAKE_MATCH[#] for any MAKE[#] where # > 0, then that MAKE directive is ignored. MAKE_MATCH[0] is
optional and if it is populated, it will be used to determine if MAKE[0] should be used to build
the module for that kernel. If multiple MAKE_MATCH directives match against the kernel being built
for, the last matching MAKE[#] will be used to build your module. If no MAKE directive is
specified or if no MAKE_MATCH matches the kernel being built for, DKMS will attempt to use a
generic MAKE command to build your module.
KERNELRELEASE will be automatically appended to MAKE[#]. If you want to suppress this behavior,
you can quote the make command: 'make'.
MAKE_MATCH[#]=
See the above entry on MAKE[#] directives. This array should be populated with regular expressions
which, when matched against the kernel being built for, will tell DKMS to use the corresponding
make command in the MAKE[#] directive array to build your module.
CLEAN= CLEAN specifies the make clean command to be used to clean up both before and after building the
module. If unset, it is assumed to be "make clean".
NO_WEAK_MODULES=
The NO_WEAK_MODULES parameter prevents dkms from creating a symlink into the weak-updates
directory, which is the default on Red Hat derivatives. The weak modules facility was designed to
eliminate the need to rebuild kernel modules when kernel upgrades occur and relies on the symbols
within the kABI.
Fedora does not guaranteed a stable kABI so it should be disabled in the specific module override
by setting it to "yes". For example, for an Nvidia DKMS module you would set the following in
/etc/dkms/nvidia.conf:
NO_WEAK_MODULES="yes"
OBSOLETE_BY=
This directive allows you to specify a kernel version that obsoletes the necessity for this
particular DKMS module. This can be specified as a particular upstream kernel or an ABI bump of a
kernel. For example, "2.6.24" would be an upstream kernel and "2.6.24-16" would represent an ABI
bump for a kernel. Both are valid in this area.
Please avoid the use of OBSOLETE_BY wherever possible. It's use indicates a lack of proper module
versioning using MODULE_VERSION() tags in the module source itself. It is better to fix the
MODULE_VERSION() tags than use OBSOLETE_BY. This also introduces a implicit distribution/version
dependency on the package, as the value of OBSOLETE_BY is meaningful only in the context of a
single distribution/version.
If you feel you must use it, please use as such in dkms.conf:
ubuntu_804="Ubuntu
8.04"
if [ -x /usr/bin/lsb_release ]; then
if [ "$(/usr/bin/lsb_release -sir)" == "${ubuntu_804}" ]; then
OBSOLETE_BY="2.6.25"
fi
fi
PATCH[#]=
Use the PATCH directive array to specify patches which should be applied to your source before a
build occurs. All patches are expected to be in -p1 format and are applied with the patch -p1
command. Each directive should specify the filename of the patch to apply, and all patches must
be located in the patches subdirectory of your source directory (
/usr/src/<module>-<module-version>/patches/ ). If any patch fails to apply, the build will be
halted and the rejections can be inspected in /var/lib/dkms/<module>/<module-version>/build/. If
a PATCH should only be applied conditionally, the PATCH_MATCH[#] array should be used, and a
corresponding regular expression should be placed in PATCH_MATCH[#] which will alert dkms to only
use that PATCH[#] if the regular expression matches the kernel which the module is currently being
built for.
PATCH_MATCH[#]=
See the above description for PATCH[#] directives. If you only want a patch applied in certain
scenarios, the PATCH_MATCH array should be utilized by giving a regular expression which matches
the kernels you intend the corresponding PATCH[#] to be applied to before building that module.
AUTOINSTALL=
If this directive is set to yes then the service /etc/rc.d/init.d/dkms_autoinstaller will
automatically try to install this module on any kernel you boot into. See the section on
dkms_autoinstaller for more information.
BUILD_DEPENDS[#]=
This optional directive is an array that allows you to specify other modules as dependencies for
your module. Each array element should be the PACKAGE_NAME of another module that is managed by
dkms. Do not specify a version or architecture in the dependency. Note that this directive is only
advisory; missing or broken dependencies cause non-fatal warnings.
BUILD_EXCLUSIVE_KERNEL=
This optional directive allows you to specify a regular expression which defines the subset of
kernels which DKMS is allowed to build your module for. If the kernel being built for does not
match against this regular expression (or does not the satisfy the constraints of any other
BUILD_EXCLUSIVE_* directive), the dkms build will error out with exit code 77. Note that dkms
autoinstall will ignore this type of error condition and simply skip the respective modules. For
example, if you set it as ="^2.4.*", your module would not be built for 2.6 or later kernels.
BUILD_EXCLUSIVE_KERNEL_MIN=
and BUILD_EXCLUSIVE_KERNEL_MAX= These optional directives allow one to specify the minimal and
maximal kernel versions supported by the module. If one (or both) of these are defined, the module
will not be built for kernels outside the specified version limits. For example, if you set
BUILD_EXCLUSIVE_KERNEL_MIN as "=3.5", your module would be built for e.g. "3.5-rc2", "3.6.18" or
other later versions but not for "3.4.999" or earlier kernels. Similarly, if you set
BUILD_EXCLUSIVE_KERNEL_MAX as ="4.12", your module would be built for e.g. "4.11.999", "3.9-rc5"
or other earlier versions, but not for "4.12-rc1" or later kernels.
BUILD_EXCLUSIVE_ARCH=
This optional directive functions very similarly to BUILD_EXCLUSIVE_KERNEL except that it matches
against the kernel architecture. For example, if you set it to ="i.86", your module would not be
built for ia32e, x86_64, amd64, s390, etc.
BUILD_EXCLUSIVE_CONFIG=
This optional directive allows you to specify a space separated list of kernel configuration
options ("CONFIG_FOO") that must be enabled in the targeted kernels ".config" file (either to be
compiled in or to be built as a module) or absent (if prefixed with an exclamation mark, e.g.
"!CONFIG_BAR") in order to build the module. For example, if you set it as ="CONFIG_PCI
!CONFIG_PREEMPT_RT", your module would only be built for kernels that have PCI enabled, but the RT
patchset disabled.
POST_ADD=
The name of the script to be run after an add is performed. The path should be given relative to
the root directory of your source.
POST_BUILD=
The name of the script to be run after a build is performed. The path should be given relative to
the root directory of your source.
POST_INSTALL=
The name of the script to be run after an install is performed. The path should be given relative
to the root directory of your source.
POST_REMOVE=
The name of the script to be run after a remove is performed. The path should be given relative to
the root directory of your source.
PRE_BUILD=
The name of the script to be run before a build is performed. The path should be given relative to
the root directory of your source.
PRE_INSTALL=
The name of the script to be run before an install is performed. The path should be given relative
to the root directory of your source. If the script exits with a non-zero value, the install will
be aborted. This is typically used to perform a custom version comparison.
DKMS.CONF VARIABLES
Within your dkms.conf file, you can use certain variables which will be replaced at run-time with
their values.
$kernelver
This variable can be used within a directive definition and during use, the actual kernel version
in question will be substituted in its place. This is especially useful in MAKE commands when
specifying which INCLUDE statements should be used when compiling your module (eg. MAKE="make all
INCLUDEDIR=/lib/modules/${kernelver}/build/include").
$kernel_source_dir
This variable holds the value of the location of your kernel source directory. Usually, this will
be /lib/modules/$kernelver/build, unless otherwise specified with the --kernelsourcedir option.
DKMS.CONF OVERRIDES
You can override the module-provided dkms.conf files. Every time after a dkms.conf file is read, dkms
will look for and read the following files in order:
/etc/dkms/<module>.conf
/etc/dkms/<module>-<module-version>.conf
/etc/dkms/<module>-<module-version>-<kernel>.conf
/etc/dkms/<module>-<module-version>-<kernel>-<arch>.conf
You can use these files to override settings in the module-provided dkms.conf files.
/etc/dkms/framework.conf
This configuration file controls how the overall DKMS framework handles. It is sourced in every time the
dkms command is run. Mainly it can currently be used to set different default values for the variables.
The file contains descriptions for each directive it supports.
Additionally to /etc/dkms/framework.conf, any file matching the glob /etc/dkms/framework.conf.d/*.conf
will be loaded as well.
$dkms_tree, $source_tree, $install_tree, $tmp_location
Control which folders DKMS uses for components and artifacts.
$verbose
Can be set to anything but a null value to enable verbose output in DKMS.
$symlink_modules
Controls whether binary modules are copied to /lib/modules or if only symlinks are created there.
Note that these variables can also be manipulated on the command line with --dkmstree,
--sourcetree, --installtree and --symlink-modules options.
$autoinstall_all_kernels
Used by the common postinst for DKMS modules. It controls if the build should be done for all
installed kernels or only for the current and latest installed kernel. It has no command line
equivalent.
$sign_file
This is the path of the sign-file kernel binary that is used to sign the kernel modules. The
variable $kernelver can be used in path to represent the target kernel version. The path for the
binary depends on the distribution.
$mok_signing_key, $mok_certificate
Location of the key and certificate files used for Secure boot. The variable $kernelver can be
used in path to represent the target kernel version. mok_signing_key can also be a "pkcs11:..."
string for PKCS#11 engine, as long as the sign_file program supports it.
$modprobe_on_install
Automatically load the built modules upon successful installation.
dkms_autoinstaller
This boot-time service automatically installs any module which has AUTOINSTALL="yes" set in its dkms.conf
file. The service works quite simply and if multiple versions of a module are in your system's DKMS tree,
it will not do anything and instead explain that manual intervention is required.
AUTHOR
Gary Lerhaupt, Emil Velikov, Simone Caronni, Xu Zhen
WEBPAGE
https://github.com/dell/dkms
dkms-3.0.11 27 April 2023 DKMS(8)