Provided by: open-infrastructure-system-boot_20190301-lts1-5_all 
NAME
persistence.conf - Configuration file for persistence media in live-boot
DESCRIPTION
If live-boot probes a persistence volume with the label (or GPT name, or file name, but from now on we
will just say "label") "persistence", that volume's persistence is fully customizable through the
persistence.conf file stored on the root of its file system. Any such labeled volume must have such a
file, or it will be ignored.
The format of persistence.conf allows empty lines and lines starting with a "#" (used for comments), both
which will be ignored. A so called "custom mount" has the format:
DIR [OPTION]...
which roughly translates to "make DIR persistence in the way described by the list of OPTIONs".
For each custom mount DIR must be an absolute path that cannot contain white spaces or the special . and
.. path components, and cannot be /live (or any of its sub-directories). Once activated all changes
(file deletion, creation and modification) to DIR on the live file system are stored persistently into a
path equivalent to DIR on the persistence media, called the source directory. The default way to achieve
persistence is to simply bind-mount the corresponding source directory to DIR, but this can be changed
through the use of OPTIONs.
All custom mounts will be done in an order so that no two custom mounts can "hide" each other. For
instance, if we have the two DIR:s /a and /a/b it would always be the case that /a is mounted first, then
/a/b. This remains true no matter how the lines in persistence.conf are ordered, or if several
persistence.conf files on different persistence media are used at the same time. However, it is forbidden
for custom mounts to have their source directory inside the source directory of another custom mount, so
the source directories that are auto-created by live-boot does not support "nested" mounts like /a and
/a/b on the same media. In this case you must use the source option (see below) to make sure that they
are stored in different source directories.
When a source directory doesn't exist on the persistence media for a certain custom mount, it will be
created automatically, and permissions and ownership will be optimistically set according to DIR. It will
also be bootstrapped by copying the contents of the DIR into its source directory on the persistence
media. The bootstrapping will not happen when the link or union options are used (see below).
OPTIONS
Custom mounts defined in persistence.conf accept the following options in a comma-separated list:
source=PATH
When given, store the persistence changes into PATH on the persistence media. PATH must be a relative
path (with respect to the persistence media root) that cannot contain white spaces or the special .
or .. path components, with the exception that it can be just . which means the persistence media
root. This option is mostly relevant if you want to nest custom mounts, which otherwise would cause
errors, or if you want to make the whole media root available (similar to the now deprecated home-rw
type of persistence).
The following options are mutually exclusive (only the last given one will be in effect):
bind
Bind-mount the source directory to DIR. This is the default.
link
Create the directory structure of the source directory on the persistence media in DIR and create
symbolic links from the corresponding place in DIR to each file in the source directory. Existing
files or directories with the same name as any link will be overwritten. Note that deleting the links
in DIR will only remove the link, not the corresponding file in the source; removed links will
reappear after a reboot. To permanently add or delete a file one must do so directly in the source
directory.
Effectively link will make only files already in the source directory persistent, not any other files
in DIR. These files must be manually added to the source directory to make use of this option, and
they will appear in DIR in addition to files already there. This option is useful when only certain
files need to be persistent, not the whole directory they're in, e.g. some configuration files in a
user's home directory.
union
Save the rw branch of a union on the persistence media, so only the changes are stored persistently.
This can potentially reduce disk usage compared to bind-mounts, and will not hide files added to the
read-only media. One caveat is that the union will use DIR from the image's read-only file system,
not the real file system root, so files created after boot (e.g. by live-config) will not appear in
the union. This option will use the union file system specified by live-boot's union boot parameter.
DIRECTORIES
/live/persistence
All persistence volumes will be mounted here (in a directory corresponding to the device name). The
persistence.conf file can easily be edited through this mount, as well as any source directories
(which is especially practical for custom mounts using the link option).
EXAMPLES
Let's say we have a persistence volume VOL with the a persistence.conf file containing the following four
lines (numbered for ease of reference):
1. /home/user1 link,source=config-files/user1
2. /home/user2 link,source=config-files/user2
3. /home
4. /usr union
The corresponding source directories are:
1. VOL/config-files/user1 (but it would be VOL/home/user1 without the source option)
2. VOL/config-files/user2 (but it would be VOL/home/user2 without the source option)
3. VOL/home
4. VOL/usr
It was necessary to set the source options for 1 and 2, since they otherwise would become nested with 3's
source, which is invalid.
Line 3 will be taken care of before line 1 and 2 in order to prevent custom mounts 1 and 2 from being
hidden by 3. When line 3 is handled, VOL/home is simply bind-mounted on /home. To illustrate what happens
for lines 1 and 2, let's say that the following files exist:
a. VOL/config-files/user1/.emacs
b. VOL/config-files/user2/.bashrc
c. VOL/config-files/user2/.ssh/config
Then the following links and directories will be created:
Link: /home/user1/.emacs -> VOL/config-files/user1/.emacs (from a)
Link: /home/user2/.bashrc -> VOL/config-files/user2/.bashrc (from b)
Dir: /homea/user2/.ssh (from c)
Link: /home/user2/.ssh/config -> VOL/config-files/user2/.ssh/config (from c)
One could argue, though, that lines 1 and 2 in the example persistence.conf file above are unnecessary
since line 3 already would make all of /home persistent. The link option is intended for situations where
you don't want a complete directory to be persistent, only certain files in it or its sub-directories.
Line 4 can be mounted at any time since its DIR (and source directory) is completely disjoint from all
the other custom mounts. When mounted, VOL/usr will be the rw branch due to the union option, and will
only contain the difference compared to the underlying read-only file system. Hence packages could be
installed into /usr with great space-wise efficiency compared to bind-mounts, since in the latter case
all of /usr would have to be copied into VOL/usr during the initial bootstrap.
SEE ALSO
live-boot(7)
live-build(7)
live-config(7)
live-tools(7)
HOMEPAGE
More information about live-boot and the Live Systems project can be found on the homepage at
<http://live-systems.org/> and in the manual at <http://live-systems.org/manual/>.
BUGS
Bugs can be reported by submitting a bugreport for the live-boot package in the Bug Tracking System at
<http://bugs.debian.org/> or by writing a mail to the Live Systems mailing list at <debian-
live@lists.debian.org>.
AUTHOR
live-boot was written by Daniel Baumann <mail@daniel-baumann.ch>.
5.0~a5-1 2015-09-22 LIVE-BOOT(conf)