NAME

       stg — driver for Future Domain based SCSI controllers

SYNOPSIS

       To compile this driver into the kernel, place the following lines in your kernel configuration file:

             device scbus
             device stg

             For one or more ISA cards:
             device isa

             In /boot/device.hints:
             hint.stg.0.at="isa"

             For one or more PCI cards:
             device pci

       Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

             stg_load="YES"

DESCRIPTION

       The  stg  driver  provides  support  for  ISA,  PCCARD  and  PCI  controllers based on Future Domain SCSI
       controller chips including the TMC-16C30, 16C50 and 32C60.

HARDWARE

       Controllers supported by the stg driver include:

       •   Adaptec 2920/A
       •   Future Domain SCSI2GO
       •   Future Domain TMC-18XX/3260
       •   IBM SCSI PCMCIA Card
       •   ICM PSC-2401 SCSI
       •   MELCO IFC-SC
       •   RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A

       Note that the Adaptec 2920C is supported by the ahc(4) driver.

SEE ALSO

       ahc(4), cd(4), ch(4), da(4), intro(4), sa(4), scsi(4)

HISTORY

       The stg device driver has been developed for NetBSD/pc98 and ported for FreeBSD.  It  first  appeared  in
       FreeBSD 2.2 with PAO and merged in FreeBSD 4.2.

AUTHORS

       The stg driver was written by Naofumi HONDA.

Debian                                           August 8, 2004                                           STG(4)