Provided by: vnstat_2.13-1_amd64 
NAME
vnstat - a console-based network traffic monitor
SYNOPSIS
vnstat [-5bDedhlmqstvy?] [--95th] [--add] [--alert output exit type condition limit unit] [--begin date]
[--config file] [--days [limit]] [--db file] [--dbdir directory] [--dbiflist [mode]] [--debug] [--end
date] [--fiveminutes [limit]] [--help] [-hg] [--hours [limit]] [--hoursgraph] [-i interface] [--iface
interface] [--iflist [mode]] [--json [mode] [limit]] [--limit limit] [--live [mode]] [--locale locale]
[--longhelp] [--merge source destination] [--months [limit]] [--oneline [mode]] [--query [mode]]
[--rateunit [mode]] [--remove] [--rename name] [-ru [mode]] [--setalias alias] [--short] [--showconfig]
[--style number] [--top [limit]] [-tr [time]] [--traffic [time]] [--version] [--xml [mode] [limit]]
[--years [limit]] [interface]
DESCRIPTION
vnStat is a console-based network traffic monitor. It keeps a log of 5 minute interval, hourly, daily,
monthly and yearly network traffic for the selected interface(s). However, it isn't a packet sniffer.
The traffic information is read from the proc(5) or sys filesystems depending on availability resulting
in light use of system resources regardless of network traffic rate. That way vnStat can be used even
without root permissions on most systems.
Functionality is divided into two commands. The purpose of the vnstat command is to provide an interface
for querying the traffic information stored in the database whereas the daemon vnstatd(8) is responsible
for data retrieval, caching and storage. Although the daemon process is constantly running as a service,
it is actually spending most of its time sleeping between data updates.
OPTIONS
--95th Show 95th percentile output for the ongoing month. This output uses the 5 minute resolution data
of the ongoing month to calculate the 95th percentile traffic rate for received, transmitted and
total. In addition, the minimum, average and maximum traffic rates for received, transmitted and
total are also shown. This output requires the 5MinuteHours configuration option to have a value
of at least 744 for storing all the necessary data, otherwise 100% coverage isn't possible.
--add Create database entry for interface specified with -i or --iface option. The daemon can be running
during this operation and will automatically start monitoring the interface without a restart
within SaveInterval minutes if configuration option RescanDatabaseOnSave is enabled. Otherwise the
daemon needs to be restarted in order for the added interface to be monitored.
--alert output exit type condition limit unit
Depending on values of given parameters, show alert, use different exit status or a combination of
both when configured situation is met.
output parameter takes a number from 0 to 3 and controls when, if at all, the command will result
in output. '0' never produces output, '1' always produces output, '2' shows output only when usage
estimate exceeds limit and '3' shows output only when limit is exceeded.
exit parameter takes a number from 0 to 5 and controls the exit status of the command. '0' always
uses exit status 0, '1' always uses exit status 1, '2' uses exit status 1 if usage estimate
exceeds limit but otherwise exit status 0 and '3' uses exit status 1 if limit is exceeded but
otherwise exit status 0. '4' and '5' are equivalents of '2' and '3' with the difference that exit
status 2 is used instead of exit status 1 when the condition is met. This can help differentiate
alerts from errors as errors will always use exit status 1.
type parameter defines to which time range type usage the limit is compared against. Available
options: 'h', 'hour', 'hourly', 'd', 'day', 'daily', 'm', 'month', 'monthly', 'y', 'year',
'yearly', 'p', '95', '95%'.
condition parameter defines if limit is compared to received (rx), transmitted (tx), total or
estimated usage of these three. Available options: 'rx', 'tx', 'total', 'rx_estimate',
'tx_estimate', 'total_estimate'. Estimate options aren't available for 95th percentile type.
limit is a greater than zero integer without decimals which defines the traffic usage limit using
the unit defined with the unit parameter. unit accepts the following options: 'B', 'KiB', 'MiB',
'GiB', 'TiB', 'PiB', 'EiB', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB'. For 95th percentile type the
following options are available: 'B/s', 'KiB/s', 'MiB/s', 'GiB/s', 'TiB/s', 'PiB/s', 'EiB/s',
'kB/s', 'MB/s', 'GB/s', 'TB/s', 'PB/s', 'EB/s', 'bit/s', 'Kibit/s', 'Mibit/s', 'Gibit/s',
'Tibit/s', 'Pibit/s', 'Eibit/s', 'kbit/s', 'Mbit/s', 'Gbit/s', 'Tbit/s', 'Pbit/s', 'Ebit/s'.
Usage must exceed limit in order for the alarm to activate. Exactly the same usage as limit does
not raise the alarm.
Estimate calculation isn't limited to the estimate options in condition parameter but can also be
achieved by using the estimate option in output or exit parameters. Missing or invalid parameters
or parameter combination will result in --alert specific help output being shown.
-b, --begin date
Begin the list output with a specific date / time defined by date instead of the begin being
selected based on the number of entries to be shown. If date isn't available in the database then
the closest later date will be used. date supports the following formats: YYYY-MM-DD HH:MM, YYYY-
MM-DD and "today". This option can only be used with --json , --xml and list outputs.
--config file
Use file as configuration file instead of using automatic configuration file search functionality.
If --config is used multiple times, the configuration settings from files later on the command
line will override configuration settings loaded from earlier files if the settings defined in the
files overlap.
-d, --days [limit]
Show traffic statistics on a daily basis for the last days. The length of the list will be limited
to 30 entries unless configured otherwise or unless the optional limit parameter is used. All
entries stored in the database will be shown if limit is set to 0.
--db file
Use file as database file instead of searching for a database from the directory specified in the
configuration file or the hardcoded default if no configuration file is available. This option
overrides --dbdir.
--dbdir directory
Use directory as database directory instead of using the directory specified in the configuration
file or the hardcoded default if no configuration file is available. This option is ignored if
--db is also defined.
--dbiflist [mode]
List interfaces currently in the database. If mode is not defined or is set to 0 then the output
will use a one line verbose format. If mode is set to 1 then the output will contain one interface
per line and if mode is set to 2 then only the interface count will be shown as a single number.
See also --iflist.
-D, --debug
Show additional debug output.
-e, --end date
End the list output with a specific date / time defined by date instead of the latest date / time
in the database. If date isn't available in the database then the closest earlier date will be
used. date supports the following formats: YYYY-MM-DD HH:MM and YYYY-MM-DD. This option can only
be used with --json , --xml and list outputs. In list outputs the estimate line is replaced with a
sum line with values representing the sums of each column. The sum line is shown only if the
output consists of more than one data line. This is applicable even if the defined date is the
same as the current date. The top list also requires --begin to be used at the same time with this
option.
-5, --fiveminutes [limit]
Show traffic statistics with a 5 minute resolution for the last hours. The length of the list
will be limited to 24 entries unless configured otherwise or unless the optional limit parameter
is used. All entries stored in the database will be shown if limit is set to 0.
-h, --hours [limit]
Show traffic statistics on a hourly basis. The length of the list will be limited to 24 entries
unless configured otherwise or unless the optional limit parameter is used. All entries store in
the database will be shown if the limit is set to 0.
-hg, --hoursgraph
Show traffic statistics on a hourly basis for the last 24 hours using a bar graph followed by a
table representing the numerical data.
-i, --iface interface
Select one specific interface and apply actions to only it. For database queries, it is possible
to merge the information of two or more interfaces using the interface1+interface2+... syntax.
All provided interfaces must be unique and must exist in the database when the merge syntax is
used. Optionally, depending on the InterfaceMatchMethod configuration setting, interface can be
replaced with alias previously set using --setalias. Merge syntax isn't supported when alias is
used. The -i, --iface option is optional and interface can be used as parameter on the command
line for selecting the used interface even without the option being explicitly used.
--iflist [mode]
List currently available interfaces. If mode is not defined or is set to 0 then the output will
use a one line verbose format. If mode is set to 1 then the output will contain one interface per
line and if mode is set to 2 then only the interface count will be shown as a single number. See
also --dbiflist.
--json [mode] [limit]
Show database content for selected interface or all interfaces in json format. All traffic values
in the output are in bytes unless otherwise indicated by the name of the key. An optional mode
parameter can be used for limiting the output to only selected information. Everything except the
95th percentile output is shown by default. Setting mode to 's' will output a summary containing
the last 2 entries of 5 minute, hourly, daily, monthly and yearly resolution data, 'f' will output
only 5 minute resolution entries, 'h' hours, 'd' days, 'm' months, 'y' years, 't' the top days and
'p' the 95th percentile. Alternatively or in combination with mode an optional limit parameter can
be used to limit the number of entries in the output. The --json option can be used in combination
with -l, --live and -tr options without mode or limit having any effect to the output. The
jsonversion field in the output contains the API version information. It will be changed only when
the names or structures of previously existing content gets changed. In comparison, the
vnstatversion field exists only as extra information.
--limit limit
Set the maximum number of shown entries in list outputs to limit. Usage of --limit overrides the
default list entry limit values and the optional limit parameter given directly for a list query.
All entries stored in the database will be shown if limit is set to 0. --limit can also be used
to control the length of --json and --xml outputs.
-l, --live [mode]
Display current transfer rate for the selected interface in real time until interrupted.
Statistics will be shown after interruption if the runtime was more than 10 seconds. An optional
mode parameter can be used to select between the displaying of packets per second (mode 0) and
transfer counters (mode 1) during execution. --style can also be used to affect the layout of the
output. The output will be in json format if used in combination with --json option.
--locale locale
Use locale instead of using the locale setting specified in the configuration file or the system
default if no configuration file is available.
--longhelp
Show complete options list.
--merge source destination
Merge interface data from source database to destination database. Unless interfaces are
specified, all interfaces from source will be merged to destination. A new database will be
created if destination doesn't exist. If an interface of the same name doesn't exist in
destination then a direct copy action for the data from source will be executed. If an interface
of the same name already exists in destination then an additive merge action will be executed. The
source database is always accessed as read-only and will never be modified by the merge actions.
Changes to the destination database cannot be reversed as subtraction actions aren't supported.
Execution of the merge needs to be acknowledged with an additional parameter. If this additional
parameter isn't provided then a preview of the actions with additional guidance will be shown.
Both source and destination can either refer directly to database files or use an alternative
file:interface syntax where the database file is suffixed with : followed with an interface name.
When used as source, the alternative syntax allows specifying one interface to be merged from
source to destination instead of all interfaces being merged. Additionally, it's possible to use
the alternative syntax in destination for specifying to which interface the data will be merged
to.
-m, --months [limit]
Show traffic statistics on a monthly basis for the last months. The length of the list will be
limited to 12 entries unless configured otherwise or unless the optional limit parameter is used.
All entries stored in the database will be shown if limit is set to 0.
--oneline [mode]
Show traffic summary for selected interface using one line with a parsable format. The output
contains 15 fields with ; used as field delimiter. The 1st field contains the API version
information of the output that will only be changed in future versions if the field content or
structure changes. The following fields in order 2) interface name, 3) timestamp for today, 4) rx
for today, 5) tx for today, 6) total for today, 7) average traffic rate for today, 8) timestamp
for current month, 9) rx for current month, 10) tx for current month, 11) total for current month,
12) average traffic rate for current month, 13) all time total rx, 14) all time total tx, 15) all
time total traffic. An optional mode parameter can be used to force all fields to output in bytes
without the unit itself shown.
-q, --query [mode]
Force database query mode. An optional mode parameter can be used to override the default query
mode. 'a' results in short summary output being used when there are more than one interface in the
database, otherwise regular summary output is used. 's' results in regular summary output being
shown for one interface regardless of the number of interfaces in the database. When the optional
mode parameter isn't defined, the configured QueryMode will be used instead.
--remove
Delete the database entry for the interface specified with -i or --iface and stop monitoring it.
The daemon can be running during this operation and will automatically detect the change.
--rename name
Rename the interface specified with -i or --iface in the database with new name name. The new
name cannot already exist in the database. This operation doesn't cause any data loss. The daemon
should not be running during this operation.
-ru, --rateunit [mode]
Swap the configured rate unit. If rate has been configured to be shown in bytes then rate will be
shown in bits if this option is present. In the same way, if rate has been configured to be shown
in bits then rate will be shown in bytes when this option is present. Alternatively, mode with
either 0 or 1 can be used as parameter for this option in order to select between bytes (0) and
bits (1) regardless of the configuration file setting.
--setalias alias
Set alias as an alias for the selected interface to be shown in queries. The set alias can be
removed by specifying an empty string for alias. The daemon can be running during this operation.
-s, --short
Use short output mode. This mode is also used when more than one interface is available in the
database and no specific interface is selected.
--showconfig
Show current configuration using the same format as the configuration file itself uses.
--style number
Modify the content and style of outputs. Set number to 0 for a narrower output, 1 for enabling bar
column, 2 for same as previous but with average traffic rate visible in summary output and 3 for
enabling average traffic rate in all outputs where it is supported. 4 disables the use of terminal
control characters in -l, --live and -tr, --traffic modes.
-t, --top [limit]
Show all time top traffic days. The length of the list will be limited to 10 entries unless
configured otherwise or unless the optional limit parameter is used. All entries stored in the
database will be shown if limit is set to 0. When used with --begin and optionally with --end, the
list will be generated using the daily data instead of separate top entries. The availability of
daily data defines the boundaries the date specific query can access.
-tr, --traffic [time]
Calculate how much traffic goes through the selected interface during the given time seconds. The
time will be 5 seconds if a number parameter isn't specified. The output will be in json format if
used in combination with --json option. However, in that case, the countdown before results isn't
shown. --style can also be used to affect the layout of the output.
-v, --version
Show current version.
--xml [mode] [limit]
Show database content for selected interface or all interfaces in xml format. All traffic values
in the output are in bytes unless otherwise indicated by the name of the key. An optional mode
parameter can be used for limiting the output to only selected information. Everything except the
95th percentile output is shown by default. Setting mode to 's' will output a summary containing
the last 2 entries of 5 minute, hourly, daily, monthly and yearly resolution data, 'f' will output
only 5 minute resolution entries, 'h' hours, 'd' days, 'm' months, 'y' years, 't' the top days and
'p' the 95th percentile. Alternatively or in combination with mode an optional limit parameter can
be used to limit the number of entries in the output. The xmlversion field in the output contains
the API version information. It will be changed only when the names or structures of previously
existing content gets changed. In comparison, the vnstatversion field exists only as extra
information.
-y, --years [limit]
Show traffic statistics on a yearly basis for the last years. The list will show all entries by
default unless configured otherwise or unless the optional limit parameter is used. All entries
stored in the database will also be shown if limit is set to 0.
-?, --help
Show a command option summary.
FILES
/var/lib/vnstat/
Default database directory.
/etc/vnstat.conf
Config file that will be used unless $HOME/.vnstatrc exists. See vnstat.conf(5) for more
information.
EXAMPLES
vnstat Display traffic summary for the default interface or multiple interfaces when more than one is
monitored.
vnstat -i eth0+eth1+eth3
Display traffic summary for a merge of interfaces eth0, eth1 and eth3.
vnstat -i eth2 --xml
Output all information about interface eth2 in xml format.
vnstat --json
Output all information of all monitored interfaces in json format.
vnstat -i eth0 --setalias local
Give interface eth0 the alias "local". That information will be later visible as a label when eth0
is queried.
vnstat -i eth2 --remove
Delete database entries for interface eth2 and stop monitoring it.
RESTRICTIONS
Updates need to be executed at least as often as it is possible for the interface to generate enough
traffic to overflow the kernel interface traffic counter. Otherwise, it is possible that some traffic
won't be seen. With 32-bit interface traffic counters, the maximum time between two updates depends on
how fast the interface can transfer 4 GiB. Note that there is no guarantee that a 64-bit kernel has
64-bit interface traffic counters for all interfaces. Calculated theoretical times are:
10 Mbit: 54 minutes
100 Mbit: 5 minutes
1000 Mbit: 30 seconds
Virtual and aliased interfaces cannot be monitored because the kernel doesn't provide traffic information
for that type of interfaces. Such interfaces are usually named eth0:0, eth0:1, eth0:2 etc. where eth0 is
the actual interface being aliased.
Using long date output formats may cause misalignment in shown columns if the length of the date exceeds
the fixed size allocation.
AUTHOR
Teemu Toivola <tst at iki dot fi>
SEE ALSO
vnstatd(8), vnstati(1), vnstat.conf(5), proc(5), ifconfig(8), units(7)
version 2.13 FEBRUARY 2025 VNSTAT(1)