Provided by: libopencsd-bin_1.5.5-1_amd64 
NAME
trc_pkt_lister - decodes captured CoreSight® trace from a trace snapshot directory.
SYNOPSIS
trc_pkt_lister [--help] [OPTIONS...]
DESCRIPTION
trc_pkt_lister is a tool that takes a snapshot directory as an input, and lists and/or decodes all the
trace packets from a given trace sink, for any source in that sink where the protocol is supported.
The output will be a list of discrete packets, generic output packets and any error messages to file
and/or screen as selected by the input command line options.
By default the program will list packets only (no decode), for the first discovered trace sink (ETB, ETF,
ETR) in the snapshot directory, with all source streams output.
OPTIONS
Snapshot selection
The program defaults to ./. if no -ss_dir option is given
-ss_dir <dir>
Set the directory path to a trace snapshot.
-ss_verbose
Verbose output when reading the snapshot.
Decode options
-id <n>
Set a trace ID to list (may be used multiple times). Default if no id set is for all IDs to be
printed.
-src_name <name>
List packets from a given snapshot source name (defaults to first source found).
-multi_session
Decode all buffers listed in snapshot under buffers key in trace.ini.
Uses config of first buffer to decode all. Ignored if -src_name is used.
-dstream_format
Input is DSTREAM framed.
-tpiu Input data is from a TPIU source that has TPIU FSYNC packets present.
-tpiu_hsync
Input data is from a TPIU source that has both TPIU FSYNC and HSYNC packets present.
-decode
Full decode of the packets from the trace snapshot (default is to list undecoded packets only).
-decode_only
Does not list the undecoded packets, just the trace decode.
-src_addr_n
In ETE protocol, indicate skipped N atoms in source address packet ranges by breaking the decode
range into multiple ranges on N atoms.
-o_raw_packed
Output raw packed trace frames.
-o_raw_unpacked
Output raw unpacked trace data per ID.-
-stats Output packet processing statistics (if available).
Consistency checks
-aa64_opcode_chk
Check for correct AA64 opcodes (MSW != 0x0000)
-direct_br_cond
Check for incorrect N atom on direct unconditional branches
-strict_br_cond
Strict conditional checks - look for incorrect N atom on all unconditional branches.
-range_cont
Range continuity checks - check next range after N atom is continuous.
-halt_err
Halt on bad packet error (default attempts to resync).
Output options
Default is to output to file and stdout. Setting any option overrides and limits to only the options set.
-logstdout
output to stdout.
-logstderr
output to stderr.
-logfile
output to file using the default log file name.
-logfilename <name>
change the name of the output log file.
FILES
Trace Snapshot directory.
The ./tests/snapshots directory contains a number of trace snapshots used for testing the library. Trace
snapshots are dumps of captured binary trace data, CoreSight component configurations and memory dumps to
allow trace decode.
Snapshots are generated on ARM targets and can then be analysed offline. The snapshot format is available
in a separate document.
EXAMPLES
Example command lines with short output excerpts.
TC2 : ETMv3 packet processor output, raw packet output.
Command line:
trc_pkt_lister -ss_dir ../../snapshots/TC2 -o_raw_unpacked
Output:
Frame Data; Index 17958; ID_DATA[0x11]; 16 04 c0 86 42 97 e1 c4
Idx:17945; ID:11; I_SYNC : Instruction Packet synchronisation.; (Periodic); Addr=0xc00
416e2; S; ISA=Thumb2;
Idx:17961; ID:11; P_HDR : Atom P-header.; WEN; Cycles=1
Frame Data; Index 17968; ID_DATA[0x11]; ce af 90 80 80 00 a4 84 a0 84 a4 88
Idx:17962; ID:11; TIMESTAMP : Timestamp Value.; TS=0x82f9d13097 (562536984727)
Idx:17974; ID:11; P_HDR : Atom P-header.; WW; Cycles=2
Juno :
ETB_1 selected which contains STM source output, plus raw packet output
Command line: trc_pkt_lister -ss_dir ../../snapshots/juno_r1_1 -o_raw_unpacked -src_name ETB_1
Output
Trace Packet Lister : STM Protocol on Trace ID 0x20
Frame Data; Index 0; ID_DATA[0x20]; ff ff ff ff ff ff ff ff ff ff 0f 0f 30 41
Idx:0; ID:20; ASYNC:Alignment synchronisation packet.
Idx:11; ID:20; VERSION:Version packet.; Ver=3
Frame Data; Index 16; ID_DATA[0x20]; f1 1a 00 00 00 30 10 af 01 00 00 10 03 f2 1a
Idx:13; ID:20; M8:Set current master.; Master=0x41
Idx:17; ID:20; D32M:32 bit data; with marker.; Data=0x10000000
Idx:22; ID:20; C8:Set current channel.; Chan=0x0001
Juno : ETMv4 full trace decode + packet monitor, source trace ID 0x10 only.
Command line:
trc_pkt_lister -ss_dir ../../snapshots/juno_r1_1 -decode -id 0x10
Output
Idx:17204; ID:10; [0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 ]; I_ASYNC : Alignment Synchronisation.
Idx:17218; ID:10; [0x01 0x01 0x00 ]; I_TRACE_INFO : Trace Info.; INFO=0x0
Idx:17221; ID:10; [0x9d 0x00 0x35 0x09 0x00 0xc0 0xff 0xff 0xff ]; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; Addr=0xFFFFFFC000096A00;
Idx:17230; ID:10; [0x04 ]; I_TRACE_ON : Trace On.
Idx:17232; ID:10; [0x85 0x00 0x35 0x09 0x00 0xc0 0xff 0xff 0xff 0xf1 0x00 0x00 0x00 0x00 0x00 ]; I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; Addr=0xFFFFFFC000096A00; Ctxt: AArch64,EL1, NS; CID=0x00000000; VMID=0x0000;
Idx:17248; ID:10; [0xf7 ]; I_ATOM_F1 : Atom format 1.; E
Idx:17230; ID:10; OCSD_GEN_TRC_ELEM_TRACE_ON( [begin or filter])
Idx:17232; ID:10; OCSD_GEN_TRC_ELEM_PE_CONTEXT((ISA=A64) EL1N; 64-bit; VMID=0x0; CTXTID=0x0; )
Idx:17248; ID:10; OCSD_GEN_TRC_ELEM_INSTR_RANGE(exec range=0xffffffc000096a00:[0xffffffc000096a10] num_i(4) last_sz(4) (ISA=A64) E ISB )
2024-03-28 TRC_PKT_LISTER(1)