NAME

       mxdisplay-matlab - mcxtrace Graphical display of simulations using Matlab/Octave

SYNOPSIS

       mxdisplay-matlab [-hom] [-png|-jpg|-fig|-eps|-pdf|-tif] [–inspect=COMP] INSTR name=value...

DESCRIPTION

       The  mxdisplay-matlab  front-end  is  a graphical debugging tool.  It presents a schematic drawing of the
       instrument definition, showing the position of the components  and  the  paths  of  the  simulated  xrays
       through  the  instrument.   It  is  thus  very  useful  for  debugging  a simulation, for example to spot
       components  in  the  wrong  position  or  to  find  out  where  xrays  are  getting  lost.   To  use  the
       mxdisplay-matlab  front-end  with a simulation, run it as follows: mxdisplay INSTR args... where INSTR is
       the name of either the instrument source INSTR.instr or the simulation program INSTR.out  generated  with
       mcxtrace, and args are the normal command line arguments for the simulation, as for mxrun.  The -h option
       will list valid options.

       The  default  plotting  backend  is mxdisplay-pyqtgraph, but there exists a number of additional plotters
       such as mxdisplay-matplotlib, mxdisplay-webgl-classic (using WebGL),  mxdisplay-webgl  (using  WebGL  and
       NodeJS), mxdisplay-matlab (using Matlab or Octave).  This is the Matlab/Octave plotting tool.

OPTIONS

       INSTR  Displays the given mcxtrace 3D model with its defaults/current parameters.

       name1=value1 ...
              Displays the given mcxtrace model with given parameters.

       -n N, –ncount N
              Number of particles to simulate

       [-png|-jpg|-fig|-eps|-pdf|-tif]
              Same  as  above,  and specifies an output file format to generate.  Possible save_as are -png -pdf
              -fig -tif -jpg -eps

       –inspect=COMP
              Same as above, and only plot component names that match COMP, given as a single component word for
              partial match, such as Monitor a component interval such as Monok:Sample or 2:10 or 2:end

       -m     Explicitely request to use Matlab

       -o     Explicitely request to use Octave

FILES

       /usr/share/mcxtrace/tools/matlab            /usr/share/mcxtrace/tools/Python/mccodelib/mccode_config.json
       ~/.mcxtrace/mccode_config.json http://www.mcxtrace.org

EXAMPLES

       Display the Test_SX example (Single crystal diffraction)

       • mxdisplay-matlab Test_SX.instr -n 1e2 TTH=13.4

AUTHORS

       mcxtrace Team (mxstas.org)

SEE ALSO

       mxstas(1), mxdoc(1), mx(1), mxrun(1), mxgui(1), mxdisplay(1)

AUTHORS

       MCXTRACE xray Ray Tracing Team.

                                                       git                                   mxDISPLAY-MATLAB(1)