Provided by: libbio-graphics-perl_2.40-6_all 
NAME
feature_draw.pl -- Render a Bio::Graphics Feature File
SYNOPSIS
feature_draw.pl [options] file.txt [file2.txt...] > rendering.png
feature_draw.pl [options] file.txt [file2.txt...] | display -
DESCRIPTION
The feature_draw.pl script is a thin front end around the Bio::Graphics module. It accepts a list of
files containing sequence (protein, nucleotide) feature coordinates from the file(s) listed on the
command line or on standard input, renders them, and produces a PNG file on standard output.
Options
This script uses GNU-style long options. This allows you to specify the image width option, for example,
with any of the following alternative forms:
--width=800
--width 800
-width 800
-w 800
--width
This sets the width of the image, in pixels. The default is 800 pixels.
--range
This sets the range of the region displayed, in base pairs from start to stop. Any of the following
formats are accepted:
--range 1..1000
--range 1,1000
--range 1-1000
Negative ranges are allowed.
Feature Files Format
This script accepts and processes sequence annotations in a simple tab-delimited format or in GFF format.
The feature file format has a configuration section and a data section. The configuration section sets up
the size and overall properties of the image, and the data section gives the feature data itself.
Configuration Section
If not provided, this scripts generates a reasonable default configuration section for you, so you do not
need to provide a configuration section to get a reasonable image. However, to tune the appearance of the
image, you will probably want to tweak the configuration. Here is an excerpt from the configuration
section:
# example file
[general]
bases = -1000..21000
height = 12
[EST]
glyph = segments
bgcolor= yellow
connector = dashed
height = 5
[FGENES]
glyph = transcript2
bgcolor = green
description = 1
The configuration section is divided into a set of sections, each one labeled with a [section title]. The
[general] section specifies global options for the entire image. Other sections apply to particular
feature types. In the example above, the configuration in the [EST] section applies to features labeled
as ESTs, while the configuration in the [FGENES] section applies to features labeled as predictions from
the FGENES gene prediction program.
Inside each section is a series of name=value pairs, where the name is the name of an option to set. You
can put whitespace around the = sign to make it more readable, or even use a colon (:) if you prefer. The
following option names are recognized:
Option Value Example
------ ----- -------
bases Min & max of the sequence range (bp) 1200..60000
width width of the image (pixels) 600
height Height of each graphical element (pixels) 10
glyph Style of each graphical element (see below) transcript
fgcolor Foreground color of each element yellow
bgcolor Background color of each element blue
linewidth Width of lines 3
label Print the feature's name 1
description Whether to print the feature's description 0
bump Elements are not allowed to collide 1
ticks Print tick marks on arrows 1
connector Type of group connector (dashed, hat or solid) dashed
The "bases" and "width" options are only relevant in the [general] section. They are overridden by the
like-named command-line options.
The remainder of the options can be located in any section, but if present in the [general] section will
set defaults for the others.
Colors are English-language color names or Web-style #RRGGBB colors (see a book on HTML for an
explanation). True/false values are 1 for true, and 0 for false. Numeric ranges can be expressed in
start..end fashion with two dots, or as start-end with a hyphen.
The "glyph" option controls how the features are rendered. The following glyphs are implemented:
Name Description
---- -----------
box A filled rectangle, nondirectional.
ellipse An oval.
arrow An arrow; can be unidirectional or
bidirectional. It is also capable of displaying
a scale with major and minor tickmarks, and can
be oriented horizontally or vertically.
segments A set of filled rectangles connected by solid
lines. Used for interrupted features, such as
gapped alignments and exon groups.
transcript Similar to segments, but the connecting line is
a "hat" shape, and the direction of
transcription is indicated by a small arrow.
transcript2 Similar to transcript, but the direction of
transcription is indicated by a terminal segment
in the shape of an arrow.
primers Two inward pointing arrows connected by a line. Used for STSs.
The bump option is the most important option for controlling the look of the image. If set to false (the
number 0), then the features are allowed to overlap. If set to true (the number 1), then the features
will move vertically to avoid colliding. If not specified, bump is turned on if the number of any given
type of sequence feature is greater than 50.
Data Section
The data section can follow or proceed the configuration section. The two sections can also be
intermixed. The data section is a tab or whitespace-delimited file which you can export from a
spreadsheet application or word processor file (be sure to save as text only!)
Here is an example data section:
Cosmid B0511 . 516-619 Cosmid B0511 . 3185-3294 Cosmid B0511
. 10946-11208 Cosmid B0511 . 13126-13511 Cosmid B0511 . 66-208
Cosmid B0511 . 6354-6499 Cosmid B0511 . 13955-14115 EST
yk595e6.5 + 3187-3294 EST yk846e07.3 - 11015-11208 EST yk53c10
yk53c10.5 + 18892-19154
yk53c10.3 - 15000-15500,15700-15800 EST yk53c10.5 + 16032-16105
SwissProt PECANEX + 13153-13656 Swedish fish FGENESH "Gene 1" -
1-205,518-616,661-735,3187-3365,3436-3846 Transmembrane domain FGENESH "Gene 2" -
16626-17396,17451-17597 Kinase and sushi domains
Each line of the file contains five columns. The columns are:
Column # Description
-------- -----------
1 feature type
2 feature name
3 strand
4 coordinates
5 description
Feature type
The feature type should correspond to one of the [feature type] headings in the configuration
section. If it doesn't, the [general] options will be applied to the feature when rendering it. The
feature name is a name for the feature. Use a "." or "-" if this is not relevant. If the name
contains whitespace, put single or double quotes ("") around the name.
Strand
The strand indicates which strand the feature is on. It is one of "+" for the forward strand, "-" for
the reverse strand, or "." for features that are not stranded.
Coordinates
The coordinates column is a set of one or more ranges that the feature occupies. Ranges are written
using ".." as in start..stop, or with hyphens, as in start-stop. For features that are composed of
multiple ranges &em; for example transcripts that have multiple exons &em; you can either put the
ranges on the same line separated by commas or spaces, or put the ranges on individual lines and just
use the same feature name and type to group them. In the example above, the Cosmid B0511 features use
the individual line style, while the FGENESH features use the all-ranges-on-one-line style.
Description
The last column contains some descriptive text. If the description option is set to true, this text
will be printed underneath the feature in the rendering.
Finally, it is possible to group related features together. An example is the ESTs yk53c10.5 and
yk53c10.3, which are related by being reads from the two ends of the clone yk53c10. To indicate this
relationship, generate a section that looks like this:
EST yk53c10
yk53c10.5 + 18892-19154
yk53c10.3 - 15000-15500,15700-15800
The group is indicated by a line that contains just two columns containing the feature type and a unique
name for the group. Follow this line with all the features that form the group, but leave the first
column (the feature type) blank. The group will be rendered by drawing a dashed line between all the
members of the group. You can change this by specifying a different connector option in the configuration
section for this feature type.
BUGS
Please report them to the author.
SEE ALSO
Bio::Graphics
AUTHOR
Lincoln Stein, lstein@cshl.org
perl v5.30.0 2019-11-25 FEATURE_DRAW(1p)