Provided by: alsa-utils_1.2.14-1ubuntu1_amd64 bug

NAME

       aseqdump - show the events received at an ALSA sequencer port

SYNOPSIS

       aseqdump [-p client:port,...]

DESCRIPTION

       aseqdump is a command-line utility that prints the sequencer events it receives as text.

       To stop receiving, press Ctrl+C.

OPTIONS

       -h,--help
              Prints a list of options.

       -V,--version
              Prints the current version.

       -l,--list
              Prints a list of possible input ports.

       -u,--ump=version
              Sets the client MIDI version.  0 is for legacy mode, 1 is UMP MIDI 1.0 mode, and 2 is UMP MIDI 2.0
              mode.

       -r,--raw
              Suppress the automatic conversion of events among UMP and legacy clients.

       -R,--raw-view
              Shows  the  raw values as is.  The channel numbers and UMP group numbers are 0-based in this mode.
              This is the default behavior.

       -N,--normalized-view
              Shows the normalized values to be aligned with MIDI  1.0.   The  channel  numbers  and  UMP  group
              numbers  are  shown  as 1-based values, i.e. 1 is the lowest number.  The velocity and data values
              are normalized between 0 and 127.  The values for MIDI 2.0  are  shown  with  two  digits  decimal
              points (from 0.00 to 127.00).  The pitch wheel is normalized between -8192 to 8192, too.

       -P,--percent-view
              Shows  the  values  in percentage.  The channel numbers and UMP group numbers are shown as 1-based
              values in this mode, too.  The velocity and data values are normalized between 0 and  100%,  shown
              with two digits decimal points.  The pitch wheel is normalized between -100% to 100%, too.

       -p,--port=client:port,...
              Sets the sequencer port(s) from which events are received.

              A  client  can be specified by its number, its name, or a prefix of its name.  A port is specified
              by its number; for port 0 of a client, the ":0" part of the port specification can be omitted.

AUTHOR

       Clemens Ladisch <clemens@ladisch.de>

                                                   19 Feb 2005                                       ASEQDUMP(1)