NAME

       brp-pacu - dual fft live audio analysis program

SYNOPSIS

       brp-pacu

DESCRIPTION

       This  manual  page  documents  briefly the brp-pacu program.  This manual page was written for the Debian
       distribution because the original program does not have a manual page.

       brp-pacu is an audio analysis tool to configure any sound system with  an  equalizer.   It  compares  the
       output  of  the  system  to  the  input  of  the  system and allows you to use this data to perform final
       equalization by matching the results with actual DSP/EQ.

       Channel 1 is the output of the system we are observing (measured), channel 2 is  the  input  (reference).
       You  also  need  a  decent calibrated omnidrectional microphone (reasonably flat 20Hz-20kHz) and either a
       USB-Preamp like the 2-channel M-Audio, or a mixer with a 30dB pad or so going into the laptop mic  input.
       No  Pad is necessary if you are lucky enough to have a laptop or PC with a line input.  The headphone out
       will have the pink noise.

       brp-pacu works through Jack Audio Connection Kit.

OPTIONS

       This program takes no arguments

SEE ALSO

       jackd(1).

AUTHOR

       This manual page was written by Jaromír Mikeš <mira.mikes@seznam.cz>, for the Debian project (but may  be
       used by others).

                                                February 28, 2011                                    BRP-PACU(1)