NAME

       mesa_pktgyro_test - PktUART simple test with Microstrain 3DM-GX3-15 gyro

SYNOPSIS

       loadrt mesa_pktgyro_test [count=N|names=name1[,name2...]]

DESCRIPTION

       This  component  is written in order to test the PktUART driver for Mesa. It resembles partly Andy Pugh's
       mesa_uart.comp .

       This module uses the names= mode of loadrt declaration to specify which PktUART instances  to  enable.  A
       check  is included to ensure that the count= option is not used instead.  For simplicity we test only one
       PktUART instance, therefore load the component like this:

        loadrt mesa_uart names=hm2_5i25.0.pktuart.0

       The PktUART instance names are printed to the dmesg buffer during the Hostmot2 setup  sequence,  one  for
       each  PktUART  instance  included  in the bitfile loaded to each installed card during the Hostmot2 setup
       sequence. Type "dmesg" at the terminal prompt to view the output.  If you want to work with more than one
       PktUART instance, consult Andy Pugh's mesa_uart.comp

       In order to compile and install do:
        halcompile --install src/hal/drivers/mesa_pktgyro_test.comp

       The component exports only one function, namely receive, which needs to be added to  a  realtime  thread.
       To test this component  set DEBUG=5 before and execute this HAL script:
        loadrt hostmot2
        loadrt hm2_pci
        loadrt mesa_pktgyro_test names=hm2_5i25.0.pktuart.0
        loadrt threads name1=test1 period1=10000000
        addf hm2_5i25.0.pktuart.0.receive test1
        start

       Check linuxcnc.log for debug output.

FUNCTIONS

       mesa-pktgyro-test.N.receive (requires a floating-point thread)

PINS

       mesa-pktgyro-test.N.rxbytes s32 out
              Number of Bytes received or negative Error code

AUTHOR

       Boris Skegin

LICENSE

       GPL

LinuxCNC Documentation                             2025-06-19                               MESA_PKTGYRO_TEST(9)