Provided by: inputlirc_34-1_amd64 
NAME
inputlircd — zeroconf LIRC daemon using input event devices
SYNOPSIS
inputlircd [-d socket] [-f] [-c] [-r repeat-rate] [-g] [-m keycode] [-n device name] [-u username]
[-t path] [-N rc name] device [device ...]
DESCRIPTION
inputlircd is a small LIRC daemon that reads from /dev/input/eventX devices and sends the received
keycodes to connecting LIRC clients. inputlircd needs no configuration, it uses the standardised names
for the keycodes as used by the kernel. Many USB remote controls that present HID devices, as well as
multimedia keyboards should work out of the box.
inputlircd expects a list of input event devices as commandline parameters. It will only read events
from those devices.
OPTIONS
-d socket
Location of the UNIX socket to which LIRC clients can connect. The default is /run/lirc/lircd.
-f Run in the foreground.
-c Capture modifier keys. This causes the CTRL, SHIFT, ALT and META keys to be treated as modifer
keys that, when used in combination with another keys, change the LIRC event from that key rather
than being sent as their own LIRC events.
-r repeat-rate
Set the repeat rate (in milliseconds) of the remote control. The default is 0. Repeated keys that
arrive less than repeat-rate milliseconds apart will be flagged as as repeat LIRC events.
-g Grab the input device(s). This gives inputlircd exclusive access to the input devices and stops
events from propagating any further.
-m keycode
Minimum keycode to send to LIRC clients. Keycodes lower than this number are filtered out. The
default is 88, this filters out the alphanumeric section and the keypad section of normal
keyboards, but allows all extended keys. The rationale is that clients should not be able to grab
normal keypresses, this could be a security risk.
-n device name
Name of an input device to read events from. This scans all available input event devices, and if
the symbolic name of an event device matches device name, adds it to the list of devices to read
from. The device name can contain wildcard patterns, see glob(7). To get a list of available
devices and their names, cat /proc/bus/input/devices or use lsinput(8).
-u username
Set user and group id to that of username after opening the devices and UNIX socket as root. The
default is nobody.
-t path
Provides the path to a file containing a mapping between input event key names and the commands
which should be reported via lirc. The files should contain lines of the form KEY_FOO = bar. This
is useful for backward compatibility. The default is not to use a translation table.
-N rc name
Set the remote control name, that is, a value of the last field of LIRC broadcast messages. If
there is more than one input event device, the specified name will be used for all of them. If rc
name is not specified, the filesystem path of each input event device will be used as its remote
control name.
device
One or more input event devices. If you want to use inputlircd to process multimedia keys on the
keyboard, then /dev/input/event0 is the most likely choice. If you have other input devices, such
as USB remote controllers that act like a HID device, then you probably need one of the other event
devices present. See /proc/bus/input/devices for a list of available input devices. If unsure,
you can add all available input event devices.
FILES
/run/lirc/lircd
Default location of the UNIX socket to which LIRC clients can connect.
/dev/input/eventX
The kernel input layer's event device files.
/proc/bus/input/devices
List of all input devices.
SEE ALSO
irw(1), input-events(8), setkeycodes(8), /usr/include/linux/input-event-codes.h.
Mon, 06 Feb 2006 17:42:25 +0100 INPUTLIRCD(8)