Provided by: fence-agents-docker_4.16.0-3ubuntu1_all 
NAME
fence_docker - Fence agent for Docker
DESCRIPTION
fence_docker is a Power Fencing agent which can be used with the Docker Engine containers. You can use
this fence-agent without any authentication, or you can use TLS authentication (use --ssl option, more
info about TLS authentication in docker: http://docs.docker.com/examples/https/).
The fence agent accepts options on the command line as well as from stdin. Fenced sends parameters
through stdin when it execs the agent. The agent can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: www.docker.io
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 443)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always
required.
-z, --ssl
Use SSL connection with verifying certificate (Default Value: 1)
--ssl-insecure
Use SSL connection without verifying certificate
--ssl-secure
Use SSL connection with verifying certificate
--api-version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)
--disable-ssl
Don't use SSL
--tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlskey
Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
--unix-socket
Path to Docker's unix socket. Use this with --disable-ssl.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
-v, --verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
--verbose-level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
--plug-separator=[char]
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--disable-timeout=[true/false]
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--stonith-status-sleep=[seconds]
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--gnutlscli-path=[path]
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device.
Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained
without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
manpage
The operational behavior of this is not known.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
ip IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 443)
method Method to fence (onoff|cycle) (Default Value: onoff)
plug Physical plug number on device, UUID or identification of machine This parameter is always
required. Obsoletes: port
ssl Use SSL connection with verifying certificate (Default Value: 1)
ssl_insecure
Use SSL connection without verifying certificate
ssl_secure
Use SSL connection with verifying certificate
api_version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)
disable_ssl
Don't use SSL
tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlskey Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
unix_socket
Path to Docker's unix socket. Use this with --disable-ssl.
quiet Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
verbose
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase
verbosity.
verbose_level
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the
command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
plug_separator
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
disable_timeout
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
stonith_status_sleep
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
retry_on
Count of attempts to retry power on (Default Value: 1)
gnutlscli_path
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
fence_docker (Fence Agent) 2009-10-20 FENCE_AGENT(8)