Ubuntu Manpage: ldap_table - Postfix LDAP client configuration

Provided by: postfix_3.10.2-1ubuntu1_amd64

NAME

       ldap_table - Postfix LDAP client configuration

SYNOPSIS

       postmap -q "string" ldap:/etc/postfix/filename

       postmap -q - ldap:/etc/postfix/filename <inputfile

DESCRIPTION

       The  Postfix  mail  system  uses  optional tables for address rewriting or mail routing. These tables are
       usually in dbm or db format.

       Alternatively, lookup tables can be specified as LDAP databases.

       In order to use LDAP lookups, define an LDAP source as a lookup table in main.cf, for example:

           alias_maps = ldap:/etc/postfix/ldap-aliases.cf

       The file /etc/postfix/ldap-aliases.cf has the same format as the Postfix main.cf file,  and  can  specify
       the parameters described below. An example is given at the end of this manual.

       This  configuration  method  is  available with Postfix version 2.1 and later.  See the section "OBSOLETE
       MAIN.CF PARAMETERS" below for older Postfix versions.

       For details about LDAP SSL and STARTTLS, see the section on SSL and STARTTLS below.

LIST MEMBERSHIP

       When   using   LDAP   to   store   lists   such   as   $mynetworks,    $mydestination,    $relay_domains,
       $local_recipient_maps,  etc., it is important to understand that the table must store each list member as
       a separate key. The table lookup verifies the *existence* of the key. See "Postfix lists  versus  tables"
       in the DATABASE_README document for a discussion.

       Do NOT create tables that return the full list of domains in $mydestination or $relay_domains etc., or IP
       addresses in $mynetworks.

       DO  create tables with each matching item as a key and with an arbitrary value. With LDAP databases it is
       not uncommon to return the key itself.

       For example, NEVER do this in a map defining $mydestination:

           query_filter = domain=*
           result_attribute = domain

       Do this instead:

           query_filter = domain=%s
           result_attribute = domain

GENERAL LDAP PARAMETERS

In the text below, default values are given in parentheses. Note: don't use quotes in these variables;
at least, not until the Postfix configuration routines understand how to deal with quoted strings.

server_host (default: localhost)
The name of the host running the LDAP server, e.g.

server_host = ldap.example.com

Depending on the LDAP client library you're using, it should be possible to specify multiple
servers here, with the library trying them in order should the first one fail. It should also be
possible to give each server in the list a different port (overriding server_port below), by
naming them like

server_host = ldap.example.com:1444

NOTE: this client will reconnect immediately after a single failure, and will fail a lookup
request after a second attempt also fails.

With OpenLDAP, a (list of) LDAP URLs can be used to specify both the hostname(s) and the port(s):

server_host = ldap://ldap.example.com:1444
ldap://ldap2.example.com:1444

All LDAP URLs accepted by the OpenLDAP library are supported, including connections over UNIX
domain sockets, and LDAP SSL (the last one provided that OpenLDAP was compiled with support for
SSL):

server_host = ldapi://%2Fsome%2Fpath
ldaps://ldap.example.com:636

server_port (default: 389)
The port the LDAP server listens on, e.g.

server_port = 778

timeout (default: 10 seconds)
The number of seconds a search can take before timing out, e.g.

timeout = 5

search_base (No default; you must configure this)
The RFC2253 base DN at which to conduct the search, e.g.

search_base = dc=your, dc=com

With Postfix 2.2 and later this parameter supports the following '%' expansions:

%% This is replaced by a literal '%' character.

%s This is replaced by the input key. RFC 2253 quoting is used to make sure that the input
key does not add unexpected metacharacters.

%u When the input key is an address of the form user@domain, %u is replaced by the (RFC 2253)
quoted local part of the address. Otherwise, %u is replaced by the entire search string.
If the localpart is empty, the search is suppressed and returns no results.

%d When the input key is an address of the form user@domain, %d is replaced by the (RFC 2253)
quoted domain part of the address. Otherwise, the search is suppressed and returns no
results.

%[SUD] For the search_base parameter, the upper-case equivalents of the above expansions behave
identically to their lower-case counter-parts. With the result_format parameter (previously
called result_filter see the OTHER OBSOLETE FEATURES section and below), they expand to the
corresponding components of input key rather than the result value.

%[1-9] The patterns %1, %2, ... %9 are replaced by the corresponding most significant component of
the input key's domain. If the input key is user@mail.example.com, then %1 is com, %2 is
example and %3 is mail. If the input key is unqualified or does not have enough domain
components to satisfy all the specified patterns, the search is suppressed and returns no
results.

query_filter (default: mailacceptinggeneralid=%s)
The RFC2254 filter used to search the directory, where %s is a substitute for the address Postfix
is trying to resolve, e.g.

query_filter = (&(mail=%s)(paid_up=true))

This parameter supports the following '%' expansions:

%% This is replaced by a literal '%' character. (Postfix 2.2 and later).

%s This is replaced by the input key. RFC 2254 quoting is used to make sure that the input
key does not add unexpected metacharacters.

%u When the input key is an address of the form user@domain, %u is replaced by the (RFC 2254)
quoted local part of the address. Otherwise, %u is replaced by the entire search string.
If the localpart is empty, the search is suppressed and returns no results.

%d When the input key is an address of the form user@domain, %d is replaced by the (RFC 2254)
quoted domain part of the address. Otherwise, the search is suppressed and returns no
results.

%[SUD] The upper-case equivalents of the above expansions behave in the query_filter parameter
identically to their lower-case counter-parts. With the result_format parameter (previously
called result_filter see the OTHER OBSOLETE FEATURES section and below), they expand to the
corresponding components of input key rather than the result value.

The above %S, %U and %D expansions are available with Postfix 2.2 and later.

The above %1, ..., %9 expansions are available with Postfix 2.2 and later.

The "domain" parameter described below limits the input keys to addresses in matching domains.
When the "domain" parameter is non-empty, LDAP queries for unqualified addresses or addresses in
non-matching domains are suppressed and return no results.

NOTE: DO NOT put quotes around the query_filter parameter.

result_format (default: %s)
Called result_filter in Postfix releases prior to 2.2. Format template applied to result
attributes. Most commonly used to append (or prepend) text to the result. This parameter supports
the following '%' expansions:

%% This is replaced by a literal '%' character. (Postfix 2.2 and later).

%s This is replaced by the value of the result attribute. When result is empty it is skipped.

%u When the result attribute value is an address of the form user@domain, %u is replaced by
the local part of the address. When the result has an empty localpart it is skipped.

%d When a result attribute value is an address of the form user@domain, %d is replaced by the
domain part of the attribute value. When the result is unqualified it is skipped.

%[SUD1-9]
The upper-case and decimal digit expansions interpolate the parts of the input key rather
than the result. Their behavior is identical to that described with query_filter, and in
fact because the input key is known in advance, lookups whose key does not contain all the
information specified in the result template are suppressed and return no results.

The above %S, %U, %D and %1, ..., %9 expansions are available with Postfix 2.2 and later.

For example, using "result_format = smtp:[%s]" allows one to use a mailHost attribute as the basis
of a transport(5) table. After applying the result format, multiple values are concatenated as
comma separated strings. The expansion_limit and size_limit parameters explained below allow one
to restrict the number of values in the result, which is especially useful for maps that should
return a single value.

The default value %s specifies that each attribute value should be used as is.

This parameter was called result_filter in Postfix releases prior to 2.2. If no "result_format" is
specified, the value of "result_filter" will be used instead before resorting to the default
value. This provides compatibility with old configuration files.

NOTE: DO NOT put quotes around the result format!

domain (default: no domain list)
This is a list of domain names, paths to files, or "type:table" databases. When specified, only
fully qualified search keys with a *non-empty* localpart and a matching domain are eligible for
lookup: 'user' lookups, bare domain lookups and "@domain" lookups are not performed. This can
significantly reduce the query load on the LDAP server.

domain = postfix.org, hash:/etc/postfix/searchdomains

It is best not to use LDAP to store the domains eligible for LDAP lookups.

NOTE: DO NOT define this parameter for local(8) aliases.

This feature is available in Postfix 1.0 and later.

result_attribute (default: maildrop)
The attribute(s) Postfix will read from any directory entries returned by the lookup, to be
resolved to an email address.

result_attribute = mailbox, maildrop

Don't rely on the default value ("maildrop"). Set the result_attribute explicitly in all ldap
table configuration files. This is particularly relevant when no result_attribute is applicable,
e.g. cases in which leaf_result_attribute and/or terminal_result_attribute are used instead. The
default value is harmless if "maildrop" is also listed as a leaf or terminal result attribute, but
it is best to not leave this to chance.

special_result_attribute (default: empty)
The attribute(s) of directory entries that can contain DNs or RFC 2255 LDAP URLs. If found, a
recursive search is performed to retrieve the entry referenced by the DN, or the entries matched
by the URL query.

special_result_attribute = memberdn

DN recursion retrieves the same result_attributes as the main query, including the special
attributes for further recursion.

URL processing retrieves only those attributes that are included in both the URL definition and as
result attributes (ordinary, special, leaf or terminal) in the Postfix table definition. If the
URL lists any of the table's special result attributes, these are retrieved and used recursively.
A URL that does not specify any attribute selection, is equivalent (RFC 2255) to a URL that
selects all attributes, in which case the selected attributes will be the full set of result
attributes in the Postfix table.

If an LDAP URL attribute-descriptor or the corresponding Postfix LDAP table result attribute (but
not both) uses RFC 2255 sub-type options ("attr;option"), the attribute requested from the LDAP
server will include the sub-type option. In all other cases, the URL attribute and the table
attribute must match exactly. Attributes with options in both the URL and the Postfix table are
requested only when the options are identical. LDAP attribute-descriptor options are very rarely
used, most LDAP users will not need to concern themselves with this level of nuanced detail.

terminal_result_attribute (default: empty)
When one or more terminal result attributes are found in an LDAP entry, all other result
attributes are ignored and only the terminal result attributes are returned. This is useful for
delegating expansion of group members to a particular host, by using an optional "maildrop"
attribute on selected groups to route the group to a specific host, where the group is expanded,
possibly via mailing-list manager or other special processing.

result_attribute =
terminal_result_attribute = maildrop

When using terminal and/or leaf result attributes, the result_attribute is best set to an empty
value when it is not used, or else explicitly set to the desired value, even if it is the default
value "maildrop".

This feature is available with Postfix 2.4 or later.

leaf_result_attribute (default: empty)
When one or more special result attributes are found in a non-terminal (see above) LDAP entry,
leaf result attributes are excluded from the expansion of that entry. This is useful when
expanding groups and the desired mail address attribute(s) of the member objects obtained via DN
or URI recursion are also present in the group object. To only return the attribute values from
the leaf objects and not the containing group, add the attribute to the leaf_result_attribute
list, and not the result_attribute list, which is always expanded. Note, the default value of
"result_attribute" is not empty, you may want to set it explicitly empty when using
"leaf_result_attribute" to expand the group to a list of member DN addresses. If groups have both
member DN references AND attributes that hold multiple string valued rfc822 addresses, then the
string attributes go in "result_attribute". The attributes that represent the email addresses of
objects referenced via a DN (or LDAP URI) go in "leaf_result_attribute".

result_attribute = memberaddr
special_result_attribute = memberdn
terminal_result_attribute = maildrop
leaf_result_attribute = mail

This feature is available with Postfix 2.4 or later.

scope (default: sub)
The LDAP search scope: sub, base, or one. These translate into LDAP_SCOPE_SUBTREE,
LDAP_SCOPE_BASE, and LDAP_SCOPE_ONELEVEL.

bind (default: yes)
Whether or how to bind to the LDAP server. Newer LDAP implementations don't require clients to
bind, which saves time. Example:

# Don't bind
bind = no
# Use SIMPLE bind
bind = yes
# Use SASL bind
bind = sasl

Postfix versions prior to 2.8 only support "bind = no" which means don't bind, and "bind = yes"
which means do a SIMPLE bind. Postfix 2.8 and later also supports "bind = SASL" when compiled
with LDAP SASL support as described in LDAP_README, it also adds the synonyms "bind = none" and
"bind = simple" for "bind = no" and "bind = yes" respectively. See the SASL section below for
additional parameters available with "bind = sasl".

If you do need to bind, you might consider configuring Postfix to connect to the local machine on
a port that's an SSL tunnel to your LDAP server. If your LDAP server doesn't natively support SSL,
put a tunnel (wrapper, proxy, whatever you want to call it) on that system too. This should
prevent the password from traversing the network in the clear.

bind_dn (default: empty)
If you do have to bind, do it with this distinguished name. Example:

bind_dn = uid=postfix, dc=your, dc=com
With "bind = sasl" (see above) the DN may be optional for some SASL mechanisms, don't specify a DN
if not needed.

bind_pw (default: empty)
The password for the distinguished name above. If you have to use this, you probably want to make
the map configuration file readable only by the Postfix user. When using the obsolete
ldap:ldapsource syntax, with map parameters in main.cf, it is not possible to securely store the
bind password. This is because main.cf needs to be world readable to allow local accounts to
submit mail via the sendmail command. Example:

bind_pw = postfixpw
With "bind = sasl" (see above) the password may be optional for some SASL mechanisms, don't
specify a password if not needed.

cache (IGNORED with a warning)

cache_expiry (IGNORED with a warning)

cache_size (IGNORED with a warning)
The above parameters are NO LONGER SUPPORTED by Postfix. Cache support has been dropped from
OpenLDAP as of release 2.1.13.

recursion_limit (default: 1000)
A limit on the nesting depth of DN and URL special result attribute evaluation. The limit must be
a non-zero positive number.

expansion_limit (default: 0)
A limit on the total number of result elements returned (as a comma separated list) by a lookup
against the map. A setting of zero disables the limit. Lookups fail with a temporary error if the
limit is exceeded. Setting the limit to 1 ensures that lookups do not return multiple values.

size_limit (default: $expansion_limit)
A limit on the number of LDAP entries returned by any single LDAP search performed as part of the
lookup. A setting of 0 disables the limit. Expansion of DN and URL references involves nested
LDAP queries, each of which is separately subjected to this limit.

Note: even a single LDAP entry can generate multiple lookup results, via multiple result
attributes and/or multi-valued result attributes. This limit caps the per search resource
utilization on the LDAP server, not the final multiplicity of the lookup result. It is analogous
to the "-z" option of "ldapsearch".

dereference (default: 0)
When to dereference LDAP aliases. (Note that this has nothing do with Postfix aliases.) The
permitted values are those legal for the OpenLDAP/UM LDAP implementations:

0 never

1 when searching

2 when locating the base object for the search

3 always

See ldap.h or the ldap_open(3) or ldapsearch(1) man pages for more information. And if you're
using an LDAP package that has other possible values, please bring it to the attention of the
postfix-users@postfix.org mailing list.

chase_referrals (default: 0)
Sets (or clears) LDAP_OPT_REFERRALS (requires LDAP version 3 support).

version (default: 3)
Specifies the LDAP protocol version to use.

debuglevel (default: 0)
What level to set for debugging in the OpenLDAP libraries.

LDAP SASL PARAMETERS

If you're using the OpenLDAP libraries compiled with SASL support, Postfix 2.8 and later built with LDAP
SASL support as described in LDAP_README can authenticate to LDAP servers via SASL.

This enables authentication to the LDAP server via mechanisms other than a simple password. The added
flexibility has a cost: it is no longer practical to set an explicit timeout on the duration of an LDAP
bind operation. Under adverse conditions, whether a SASL bind times out, or if it does, the duration of
the timeout is determined by the LDAP and SASL libraries.

It is best to use tables that use SASL binds via proxymap(8), this way the requesting process can
time-out the proxymap request. This also lets you tailer the process environment by overriding the
proxymap(8) import_environment setting in master.cf(5). Special environment settings may be needed to
configure GSSAPI credential caches or other SASL mechanism specific options. The GSSAPI credentials used
for LDAP lookups may need to be different than say those used for the Postfix SMTP client to authenticate
to remote servers.

Using SASL mechanisms requires LDAP protocol version 3, the default protocol version is 2 for backwards
compatibility. You must set "version = 3" in addition to "bind = sasl".

The following parameters are relevant to using LDAP with SASL

sasl_mechs (default: empty)
Space separated list of SASL mechanism(s) to try.

sasl_realm (default: empty)
SASL Realm to use, if applicable.

sasl_authz_id (default: empty)
The SASL authorization identity to assert, if applicable.

sasl_minssf (default: 0)
The minimum required sasl security factor required to establish a connection.

LDAP SSL AND STARTTLS PARAMETERS

If you're using the OpenLDAP libraries compiled with SSL support, Postfix can connect to LDAP SSL servers
and can issue the STARTTLS command.

LDAP SSL service can be requested by using a LDAP SSL URL in the server_host parameter:

server_host = ldaps://ldap.example.com:636

STARTTLS can be turned on with the start_tls parameter:

start_tls = yes

Both forms require LDAP protocol version 3, which has to be set explicitly with:

version = 3

If any of the Postfix programs querying the map is configured in master.cf to run chrooted, all the
certificates and keys involved have to be copied to the chroot jail. Of course, the private keys should
only be readable by the user "postfix".

The following parameters are relevant to LDAP SSL and STARTTLS:

start_tls (default: no)
Whether or not to issue STARTTLS upon connection to the server. Don't set this with LDAP SSL (the
SSL session is setup automatically when the TCP connection is opened).

tls_ca_cert_dir (No default; set either this or tls_ca_cert_file)
Directory containing X509 Certification Authority certificates in PEM format which are to be
recognized by the client in SSL/TLS connections. The files each contain one CA certificate. The
files are looked up by the CA subject name hash value, which must hence be available. If more than
one CA certificate with the same name hash value exist, the extension must be different (e.g.
9d66eef0.0, 9d66eef0.1 etc). The search is performed in the ordering of the extension number,
regardless of other properties of the certificates. Use the c_rehash utility (from the OpenSSL
distribution) to create the necessary links.

tls_ca_cert_file (No default; set either this or tls_ca_cert_dir)
File containing the X509 Certification Authority certificates in PEM format which are to be
recognized by the client in SSL/TLS connections. This setting takes precedence over
tls_ca_cert_dir.

tls_cert (No default; you must set this)
File containing client's X509 certificate to be used by the client in SSL/ TLS connections.

tls_key (No default; you must set this)
File containing the private key corresponding to the above tls_cert.

tls_require_cert (default: no)
Whether or not to request server's X509 certificate and check its validity when establishing
SSL/TLS connections. The supported values are no and yes.

With no, the server certificate trust chain is not checked, but with OpenLDAP prior to 2.1.13, the
name in the server certificate must still match the LDAP server name. With OpenLDAP 2.0.0 to
2.0.11 the server name is not necessarily what you specified, rather it is determined (by reverse
lookup) from the IP address of the LDAP server connection. With OpenLDAP prior to 2.0.13,
subjectAlternativeName extensions in the LDAP server certificate are ignored: the server name must
match the subject CommonName. The no setting corresponds to the never value of TLS_REQCERT in LDAP
client configuration files.

Don't use TLS with OpenLDAP 2.0.x (and especially with x <= 11) if you can avoid it.

With yes, the server certificate must be issued by a trusted CA, and not be expired. The LDAP
server name must match one of the name(s) found in the certificate (see above for OpenLDAP library
version dependent behavior). The yes setting corresponds to the demand value of TLS_REQCERT in
LDAP client configuration files.

The "try" and "allow" values of TLS_REQCERT have no equivalents here. They are not available with
OpenLDAP 2.0, and in any case have questionable security properties. Either you want TLS verified
LDAP connections, or you don't.

The yes value only works correctly with Postfix 2.5 and later, or with OpenLDAP 2.0. Earlier
Postfix releases or later OpenLDAP releases don't work together with this setting. Support for
LDAP over TLS was added to Postfix based on the OpenLDAP 2.0 API.

tls_random_file (No default)
Path of a file to obtain random bits from when /dev/[u]random is not available, to be used by the
client in SSL/TLS connections.

tls_cipher_suite (No default)
Cipher suite to use in SSL/TLS negotiations.

EXAMPLE

       Here's a basic example for using LDAP to look up local(8) aliases.  Assume that in main.cf, you have:

           alias_maps = hash:/etc/aliases,
                   ldap:/etc/postfix/ldap-aliases.cf

       and in ldap:/etc/postfix/ldap-aliases.cf you have:

           server_host = ldap.example.com
           search_base = dc=example, dc=com

       Upon receiving mail for a local address "ldapuser" that isn't found in the /etc/aliases database, Postfix
       will  search the LDAP server listening at port 389 on ldap.example.com.  It will bind anonymously, search
       for any directory entries whose mailacceptinggeneralid  attribute  is  "ldapuser",  read  the  "maildrop"
       attributes of those found, and build a list of their maildrops, which will be treated as RFC822 addresses
       to which the message will be delivered.

OBSOLETE MAIN.CF PARAMETERS

       For  backwards compatibility with Postfix version 2.0 and earlier, LDAP parameters can also be defined in
       main.cf.  Specify as LDAP source a name that doesn't begin with a slash or a dot.   The  LDAP  parameters
       will  then  be  accessible  as the name you've given the source in its definition, an underscore, and the
       name of the parameter.  For example, if the map is  specified  as  "ldap:ldapsource",  the  "server_host"
       parameter below would be defined in main.cf as "ldapsource_server_host".

       Note:  with  this  form,  the  passwords  for  the LDAP sources are written in main.cf, which is normally
       world-readable.  Support for this form will be removed in a future Postfix version.

OTHER OBSOLETE FEATURES

       result_filter (No default)
              For backwards compatibility with the pre 2.2 LDAP clients,  result_filter  can  for  now  be  used
              instead of result_format, when the latter parameter is not also set.  The new name better reflects
              the function of the parameter. This compatibility interface may be removed in a future release.

README FILES

       Use "postconf readme_directory" or "postconf html_directory" to locate this information.
       DATABASE_README, Postfix lookup table overview
       LDAP_README, Postfix LDAP client guide

LICENSE

       The Secure Mailer license must be distributed with this software.

AUTHOR(S)

       Carsten  Hoeger,  Hery  Rakotoarisoa,  John  Hensley,  Keith  Stevenson, LaMont Jones, Liviu Daia, Manuel
       Guesdon, Mike Mattice, Prabhat K Singh, Sami Haahtinen, Samuel Tardieu, Victor Duchovni, and many others.

                                                                                                   LDAP_TABLE(5)