Provided by: dpdk-doc_24.11.2-2_all 
NAME
rte_bbdev_op.h
SYNOPSIS
#include <stdint.h>
#include <rte_compat.h>
#include <rte_common.h>
#include <rte_mbuf.h>
#include <rte_memory.h>
#include <rte_mempool.h>
Data Structures
struct rte_bbdev_op_data
struct rte_bbdev_op_dec_turbo_cb_params
struct rte_bbdev_op_dec_ldpc_cb_params
struct rte_bbdev_op_dec_turbo_tb_params
struct rte_bbdev_op_dec_ldpc_tb_params
struct rte_bbdev_op_turbo_dec
struct rte_bbdev_op_ldpc_dec
struct rte_bbdev_op_enc_turbo_cb_params
struct rte_bbdev_op_enc_turbo_tb_params
struct rte_bbdev_op_enc_ldpc_cb_params
struct rte_bbdev_op_enc_ldpc_tb_params
struct rte_bbdev_op_turbo_enc
struct rte_bbdev_op_ldpc_enc
struct rte_bbdev_op_fft
struct rte_bbdev_op_mldts
struct rte_bbdev_op_cap_turbo_dec
struct rte_bbdev_op_cap_turbo_enc
struct rte_bbdev_op_cap_ldpc_dec
struct rte_bbdev_op_cap_ldpc_enc
struct rte_bbdev_op_cap_fft
struct rte_bbdev_op_cap_mld
struct rte_bbdev_enc_op
struct rte_bbdev_dec_op
struct rte_bbdev_fft_op
struct rte_bbdev_mldts_op
struct rte_bbdev_op_cap
Enumerations
enum rte_bbdev_op_td_flag_bitmasks { RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE = (1ULL << 0),
RTE_BBDEV_TURBO_CRC_TYPE_24B = (1ULL << 1), RTE_BBDEV_TURBO_EQUALIZER = (1ULL << 2),
RTE_BBDEV_TURBO_SOFT_OUT_SATURATE = (1ULL << 3), RTE_BBDEV_TURBO_HALF_ITERATION_EVEN = (1ULL << 4),
RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH = (1ULL << 5), RTE_BBDEV_TURBO_SOFT_OUTPUT = (1ULL << 6),
RTE_BBDEV_TURBO_EARLY_TERMINATION = (1ULL << 7), RTE_BBDEV_TURBO_DEC_INTERRUPTS = (1ULL << 9),
RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN = (1ULL << 10), RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN = (1ULL << 11),
RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT = (1ULL << 12), RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT = (1ULL
<< 13), RTE_BBDEV_TURBO_MAP_DEC = (1ULL << 14), RTE_BBDEV_TURBO_DEC_SCATTER_GATHER = (1ULL << 15),
RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP = (1ULL << 16), RTE_BBDEV_TURBO_DEC_CRC_24B_DROP = (1ULL << 17) }
enum rte_bbdev_op_te_flag_bitmasks { RTE_BBDEV_TURBO_RV_INDEX_BYPASS = (1ULL << 0),
RTE_BBDEV_TURBO_RATE_MATCH = (1ULL << 1), RTE_BBDEV_TURBO_CRC_24B_ATTACH = (1ULL << 2),
RTE_BBDEV_TURBO_CRC_24A_ATTACH = (1ULL << 3), RTE_BBDEV_TURBO_ENC_INTERRUPTS = (1ULL << 4),
RTE_BBDEV_TURBO_ENC_SCATTER_GATHER = (1ULL << 5) }
enum rte_bbdev_op_ldpcdec_flag_bitmasks { RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK = (1ULL << 0),
RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK = (1ULL << 1), RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP = (1ULL << 2),
RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK = (1ULL << 3), RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS = (1ULL << 4),
RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE = (1ULL << 5), RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE = (1ULL <<
6), RTE_BBDEV_LDPC_DECODE_BYPASS = (1ULL << 7), RTE_BBDEV_LDPC_SOFT_OUT_ENABLE = (1ULL << 8),
RTE_BBDEV_LDPC_SOFT_OUT_RM_BYPASS = (1ULL << 9), RTE_BBDEV_LDPC_SOFT_OUT_DEINTERLEAVER_BYPASS = (1ULL
<< 10), RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE = (1ULL << 11), RTE_BBDEV_LDPC_DEC_INTERRUPTS = (1ULL <<
12), RTE_BBDEV_LDPC_DEC_SCATTER_GATHER = (1ULL << 13), RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION = (1ULL
<< 14), RTE_BBDEV_LDPC_LLR_COMPRESSION = (1ULL << 15), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE
= (1ULL << 16), RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE = (1ULL << 17),
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK = (1ULL << 18),
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS = (1ULL << 19), RTE_BBDEV_LDPC_HARQ_4BIT_COMPRESSION =
(1ULL << 20) }
enum rte_bbdev_op_ldpcenc_flag_bitmasks { RTE_BBDEV_LDPC_INTERLEAVER_BYPASS = (1ULL << 0),
RTE_BBDEV_LDPC_RATE_MATCH = (1ULL << 1), RTE_BBDEV_LDPC_CRC_24A_ATTACH = (1ULL << 2),
RTE_BBDEV_LDPC_CRC_24B_ATTACH = (1ULL << 3), RTE_BBDEV_LDPC_CRC_16_ATTACH = (1ULL << 4),
RTE_BBDEV_LDPC_ENC_INTERRUPTS = (1ULL << 5), RTE_BBDEV_LDPC_ENC_SCATTER_GATHER = (1ULL << 6),
RTE_BBDEV_LDPC_ENC_CONCATENATION = (1ULL << 7) }
enum rte_bbdev_op_fft_flag_bitmasks { RTE_BBDEV_FFT_WINDOWING = (1ULL << 0), RTE_BBDEV_FFT_CS_ADJUSTMENT
= (1ULL << 1), RTE_BBDEV_FFT_DFT_BYPASS = (1ULL << 2), RTE_BBDEV_FFT_IDFT_BYPASS = (1ULL << 3),
RTE_BBDEV_FFT_WINDOWING_BYPASS = (1ULL << 4), RTE_BBDEV_FFT_POWER_MEAS = (1ULL << 5),
RTE_BBDEV_FFT_FP16_INPUT = (1ULL << 6), RTE_BBDEV_FFT_FP16_OUTPUT = (1ULL << 7),
RTE_BBDEV_FFT_TIMING_OFFSET_PER_CS = (1ULL << 8), RTE_BBDEV_FFT_TIMING_ERROR = (1ULL << 9),
RTE_BBDEV_FFT_DEWINDOWING = (1ULL << 10), RTE_BBDEV_FFT_FREQ_RESAMPLING = (1ULL << 11) }
enum rte_bbdev_op_mldts_flag_bitmasks { RTE_BBDEV_MLDTS_REP = (1ULL << 0) }
enum rte_bbdev_op_cb_mode { RTE_BBDEV_TRANSPORT_BLOCK = 0, RTE_BBDEV_CODE_BLOCK = 1 }
enum rte_bbdev_op_type { RTE_BBDEV_OP_NONE, RTE_BBDEV_OP_TURBO_DEC, RTE_BBDEV_OP_TURBO_ENC,
RTE_BBDEV_OP_LDPC_DEC, RTE_BBDEV_OP_LDPC_ENC, RTE_BBDEV_OP_FFT, RTE_BBDEV_OP_MLDTS }
enum
Functions
const char * rte_bbdev_op_type_str (enum rte_bbdev_op_type op_type)
struct rte_mempool * rte_bbdev_op_pool_create (const char *name, enum rte_bbdev_op_type type, unsigned
int num_elements, unsigned int cache_size, int socket_id)
static int rte_bbdev_enc_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_enc_op **ops,
unsigned int num_ops)
static int rte_bbdev_dec_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_dec_op **ops,
unsigned int num_ops)
static int rte_bbdev_fft_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_fft_op **ops,
unsigned int num_ops)
static int rte_bbdev_mldts_op_alloc_bulk (struct rte_mempool *mempool, struct rte_bbdev_mldts_op **ops,
uint16_t num_ops)
static void rte_bbdev_dec_op_free_bulk (struct rte_bbdev_dec_op **ops, unsigned int num_ops)
static void rte_bbdev_enc_op_free_bulk (struct rte_bbdev_enc_op **ops, unsigned int num_ops)
static void rte_bbdev_fft_op_free_bulk (struct rte_bbdev_fft_op **ops, unsigned int num_ops)
static void rte_bbdev_mldts_op_free_bulk (struct rte_bbdev_mldts_op **ops, unsigned int num_ops)
Detailed Description
Defines wireless base band layer 1 operations and capabilities
Definition in file rte_bbdev_op.h.
Enumeration Type Documentation
enum rte_bbdev_op_td_flag_bitmasks
Flags for turbo decoder operation and capability structure
Enumerator
RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE
If sub block de-interleaving is to be performed.
RTE_BBDEV_TURBO_CRC_TYPE_24B
To use CRC Type 24B (otherwise use CRC Type 24A).
RTE_BBDEV_TURBO_EQUALIZER
If turbo equalization is to be performed.
RTE_BBDEV_TURBO_SOFT_OUT_SATURATE
If set, saturate soft output to +/-127
RTE_BBDEV_TURBO_HALF_ITERATION_EVEN
Set to 1 to start iteration from even, else odd; one iteration = max_iteration + 0.5
RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH
If 0, TD stops after CRC matches; else if 1, runs to end of next odd iteration after CRC matches
RTE_BBDEV_TURBO_SOFT_OUTPUT
Set if soft output is required to be output
RTE_BBDEV_TURBO_EARLY_TERMINATION
Set to enable early termination mode
RTE_BBDEV_TURBO_DEC_INTERRUPTS
Set if a device supports decoder dequeue interrupts
RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN
Set if positive LLR encoded input is supported. Positive LLR value represents the level of
confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with
RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN when used to formalize the input data format.
RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN
Set if negative LLR encoded input is supported. Negative LLR value represents the level of
confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with
RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN when used to formalize the input data format.
RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT
Set if positive LLR soft output is supported. Positive LLR value represents the level of
confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with
RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT when used to formalize the input data format.
RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT
Set if negative LLR soft output is supported. Negative LLR value represents the level of
confidence for bit '1', and vice versa for bit '0'. This is mutually exclusive with
RTE_BBDEV_TURBO_POS_LLR_1_BIT_SOFT_OUT when used to formalize the input data format.
RTE_BBDEV_TURBO_MAP_DEC
Set if driver supports flexible parallel MAP engine decoding. If not supported, num_maps (number
of MAP engines) argument is unusable.
RTE_BBDEV_TURBO_DEC_SCATTER_GATHER
Set if a device supports scatter-gather functionality
RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP
Set to keep CRC24B bits appended while decoding. Only usable when decoding Transport Block mode.
RTE_BBDEV_TURBO_DEC_CRC_24B_DROP
Set to drop CRC24B bits not to be appended while decoding.
Definition at line 67 of file rte_bbdev_op.h.
enum rte_bbdev_op_te_flag_bitmasks
Flags for turbo encoder operation and capability structure
Enumerator
RTE_BBDEV_TURBO_RV_INDEX_BYPASS
Ignore rv_index and set K0 = 0
RTE_BBDEV_TURBO_RATE_MATCH
If rate matching is to be performed
RTE_BBDEV_TURBO_CRC_24B_ATTACH
This bit must be set to enable CRC-24B generation
RTE_BBDEV_TURBO_CRC_24A_ATTACH
This bit must be set to enable CRC-24A generation
RTE_BBDEV_TURBO_ENC_INTERRUPTS
Set if a device supports encoder dequeue interrupts
RTE_BBDEV_TURBO_ENC_SCATTER_GATHER
Set if a device supports scatter-gather functionality
Definition at line 137 of file rte_bbdev_op.h.
enum rte_bbdev_op_ldpcdec_flag_bitmasks
Flags for LDPC decoder operation and capability structure
Enumerator
RTE_BBDEV_LDPC_CRC_TYPE_24A_CHECK
Set for transport block CRC-24A checking
RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK
Set for code block CRC-24B checking
RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP
Set to drop the last CRC bits decoding output
RTE_BBDEV_LDPC_CRC_TYPE_16_CHECK
Set for transport block CRC-16 checking
RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS
Set for bit-level de-interleaver bypass on Rx stream.
RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE
Set for HARQ combined input stream enable.
RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE
Set for HARQ combined output stream enable.
RTE_BBDEV_LDPC_DECODE_BYPASS
Set for LDPC decoder bypass. RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE must be set.
RTE_BBDEV_LDPC_SOFT_OUT_ENABLE
Set for soft-output stream enable
RTE_BBDEV_LDPC_SOFT_OUT_RM_BYPASS
Set for Rate-Matching bypass on soft-out stream.
RTE_BBDEV_LDPC_SOFT_OUT_DEINTERLEAVER_BYPASS
Set for bit-level de-interleaver bypass on soft-output stream.
RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE
Set for iteration stopping on successful decode condition i.e. a successful syndrome check.
RTE_BBDEV_LDPC_DEC_INTERRUPTS
Set if a device supports decoder dequeue interrupts.
RTE_BBDEV_LDPC_DEC_SCATTER_GATHER
Set if a device supports scatter-gather functionality.
RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION
Set if a device supports input/output HARQ compression.
RTE_BBDEV_LDPC_LLR_COMPRESSION
Set if a device supports input LLR compression.
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE
Set if a device supports HARQ input from device's internal memory.
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE
Set if a device supports HARQ output to device's internal memory.
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK
Set if a device supports loop-back access to HARQ internal memory. Intended for troubleshooting.
RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS
Set if a device includes LLR filler bits in the circular buffer for HARQ memory. If not set, it is
assumed the filler bits are not in HARQ memory and handled directly by the LDPC decoder.
RTE_BBDEV_LDPC_HARQ_4BIT_COMPRESSION
Set if a device supports input/output HARQ 4bits compression.
Definition at line 153 of file rte_bbdev_op.h.
enum rte_bbdev_op_ldpcenc_flag_bitmasks
Flags for LDPC encoder operation and capability structure
Enumerator
RTE_BBDEV_LDPC_INTERLEAVER_BYPASS
Set for bit-level interleaver bypass on output stream.
RTE_BBDEV_LDPC_RATE_MATCH
If rate matching is to be performed
RTE_BBDEV_LDPC_CRC_24A_ATTACH
Set for transport block CRC-24A attach
RTE_BBDEV_LDPC_CRC_24B_ATTACH
Set for code block CRC-24B attach
RTE_BBDEV_LDPC_CRC_16_ATTACH
Set for code block CRC-16 attach
RTE_BBDEV_LDPC_ENC_INTERRUPTS
Set if a device supports encoder dequeue interrupts.
RTE_BBDEV_LDPC_ENC_SCATTER_GATHER
Set if a device supports scatter-gather functionality.
RTE_BBDEV_LDPC_ENC_CONCATENATION
Set if a device supports concatenation of non byte aligned output
Definition at line 212 of file rte_bbdev_op.h.
enum rte_bbdev_op_fft_flag_bitmasks
Flags for FFT operation and capability structure.
Enumerator
RTE_BBDEV_FFT_WINDOWING
Flexible windowing capability.
RTE_BBDEV_FFT_CS_ADJUSTMENT
Flexible adjustment of Cyclic Shift time offset.
RTE_BBDEV_FFT_DFT_BYPASS
Set for bypass the DFT and get directly into iDFT input.
RTE_BBDEV_FFT_IDFT_BYPASS
Set for bypass the IDFT and get directly the DFT output.
RTE_BBDEV_FFT_WINDOWING_BYPASS
Set for bypass time domain windowing.
RTE_BBDEV_FFT_POWER_MEAS
Set for optional power measurement on DFT output.
RTE_BBDEV_FFT_FP16_INPUT
Set if the input data used FP16 format.
RTE_BBDEV_FFT_FP16_OUTPUT
Set if the output data uses FP16 format.
RTE_BBDEV_FFT_TIMING_OFFSET_PER_CS
Flexible adjustment of Timing offset adjustment per CS.
RTE_BBDEV_FFT_TIMING_ERROR
Flexible adjustment of Timing error correction per CS.
RTE_BBDEV_FFT_DEWINDOWING
Set for optional frequency domain dewindowing.
RTE_BBDEV_FFT_FREQ_RESAMPLING
Flexible adjustment of frequency resampling mode.
Definition at line 232 of file rte_bbdev_op.h.
enum rte_bbdev_op_mldts_flag_bitmasks
Flags for MLDTS operation and capability structure
Enumerator
RTE_BBDEV_MLDTS_REP
Set if the device supports C/R repetition options.
Definition at line 260 of file rte_bbdev_op.h.
enum rte_bbdev_op_cb_mode
Flags for the Code Block/Transport block mode
Enumerator
RTE_BBDEV_TRANSPORT_BLOCK
One operation is one or fraction of one transport block
RTE_BBDEV_CODE_BLOCK
One operation is one code block mode
Definition at line 266 of file rte_bbdev_op.h.
enum rte_bbdev_op_type
Different operation types supported by the device. The related macro RTE_BBDEV_OP_TYPE_SIZE_MAX can be
used as an absolute maximum for notably sizing array while allowing for future enumeration insertion.
Enumerator
RTE_BBDEV_OP_NONE
Dummy operation that does nothing
RTE_BBDEV_OP_TURBO_DEC
Turbo decode
RTE_BBDEV_OP_TURBO_ENC
Turbo encode
RTE_BBDEV_OP_LDPC_DEC
LDPC decode
RTE_BBDEV_OP_LDPC_ENC
LDPC encode
RTE_BBDEV_OP_FFT
FFT
RTE_BBDEV_OP_MLDTS
MLD-TS
Definition at line 930 of file rte_bbdev_op.h.
anonymous enum
Bit indexes of possible errors reported through status field
Definition at line 942 of file rte_bbdev_op.h.
Function Documentation
const char * rte_bbdev_op_type_str (enum rte_bbdev_op_type op_type)
Converts queue operation type from enum to string
Parameters
op_type Operation type as enum
Returns
Operation type as string or NULL if op_type is invalid
struct rte_mempool * rte_bbdev_op_pool_create (const char * name, enum rte_bbdev_op_type type, unsigned int
num_elements, unsigned int cache_size, int socket_id)
Creates a bbdev operation mempool
Parameters
name Pool name.
type Operation type, use RTE_BBDEV_OP_NONE for a pool which supports all operation types.
num_elements Number of elements in the pool.
cache_size Number of elements to cache on an lcore, see rte_mempool_create() for further details
about cache size.
socket_id Socket to allocate memory on.
Returns
• Pointer to a mempool on success,
• NULL pointer on failure.
static int rte_bbdev_enc_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_enc_op ** ops,
unsigned int num_ops) [inline], [static]
Bulk allocate encode operations from a mempool with parameter defaults reset.
Parameters
mempool Operation mempool, created by rte_bbdev_op_pool_create().
ops Output array to place allocated operations
num_ops Number of operations to allocate
Returns
• 0 on success
• EINVAL if invalid mempool is provided
Definition at line 1076 of file rte_bbdev_op.h.
static int rte_bbdev_dec_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_dec_op ** ops,
unsigned int num_ops) [inline], [static]
Bulk allocate decode operations from a mempool with parameter defaults reset.
Parameters
mempool Operation mempool, created by rte_bbdev_op_pool_create().
ops Output array to place allocated operations
num_ops Number of operations to allocate
Returns
• 0 on success
• EINVAL if invalid mempool is provided
Definition at line 1107 of file rte_bbdev_op.h.
static int rte_bbdev_fft_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_fft_op ** ops,
unsigned int num_ops) [inline], [static]
Bulk allocate FFT operations from a mempool with default parameters.
Parameters
mempool Operation mempool, created by rte_bbdev_op_pool_create.
ops Output array to place allocated operations.
num_ops Number of operations to allocate.
Returns
• 0 on success.
• EINVAL if invalid mempool is provided.
Definition at line 1138 of file rte_bbdev_op.h.
static int rte_bbdev_mldts_op_alloc_bulk (struct rte_mempool * mempool, struct rte_bbdev_mldts_op ** ops,
uint16_t num_ops) [inline], [static]
Bulk allocate MLD operations from a mempool with parameter defaults reset.
Parameters
mempool Operation mempool, created by rte_bbdev_op_pool_create.
ops Output array to place allocated operations.
num_ops Number of operations to allocate.
Returns
• 0 on success.
• EINVAL if invalid mempool is provided.
Definition at line 1167 of file rte_bbdev_op.h.
static void rte_bbdev_dec_op_free_bulk (struct rte_bbdev_dec_op ** ops, unsigned int num_ops) [inline],
[static]
Free decode operation structures that were allocated by rte_bbdev_dec_op_alloc_bulk(). All structures
must belong to the same mempool.
Parameters
ops Operation structures
num_ops Number of structures
Definition at line 1192 of file rte_bbdev_op.h.
static void rte_bbdev_enc_op_free_bulk (struct rte_bbdev_enc_op ** ops, unsigned int num_ops) [inline],
[static]
Free encode operation structures that were allocated by rte_bbdev_enc_op_alloc_bulk(). All structures
must belong to the same mempool.
Parameters
ops Operation structures
num_ops Number of structures
Definition at line 1209 of file rte_bbdev_op.h.
static void rte_bbdev_fft_op_free_bulk (struct rte_bbdev_fft_op ** ops, unsigned int num_ops) [inline],
[static]
Free encode operation structures that were allocated by rte_bbdev_fft_op_alloc_bulk. All structures must
belong to the same mempool.
Parameters
ops Operation structures.
num_ops Number of structures.
Definition at line 1226 of file rte_bbdev_op.h.
static void rte_bbdev_mldts_op_free_bulk (struct rte_bbdev_mldts_op ** ops, unsigned int num_ops) [inline],
[static]
Free encode operation structures that were allocated by rte_bbdev_mldts_op_alloc_bulk(). All structures
must belong to the same mempool.
Parameters
ops Operation structures
num_ops Number of structures
Definition at line 1243 of file rte_bbdev_op.h.
Author
Generated automatically by Doxygen for DPDK from the source code.
DPDK Version 24.11.2 rte_bbdev_op.h(3)