NAME

       Config::Model::models::LCDd::server - Configuration class LCDd::server

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   AutoRotate
       If set to no, LCDd will start with screen rotation disabled. This has the same effect as if the
       ToggleRotateKey had been pressed. Rotation will start if the ToggleRotateKey is pressed. Note that this
       setting does not turn off priority sorting of screens.  Optional. Type boolean.

       upstream_default value :
           on

   Backlight
       Set  master  backlight  setting.  If set to 'open' a client may control the backlight for its own screens
       (only).  Optional. Type enum. choice: 'off', 'open', 'on'.

       upstream_default value :
           open

   Bind
       Tells the driver to bind to the given interface.  Optional. Type uniline.

       upstream_default value :
           127.0.0.1

   Driver
       Tells the server to load the given drivers. Multiple lines can be given.  The name of the driver is  case
       sensitive  and  determines  the  section  where to look for further configuration options of the specific
       driver as well as the name of the dynamic driver module to load  at  runtime.   The  latter  one  can  be
       changed by giving a File= directive in the driver specific section.

       The following drivers are supported:
         bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba,
         g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior,
         irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800,
         mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD,
         Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330,
         sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963,
         text, tyan, ula200, vlsys_m428, xosd, yard2LCD.  Optional. Type check_list. choice: 'bayrad', 'CFontz',
       'CFontzPacket',  'curses',  'CwLnx',  'ea65',  'EyeboxOne',  'futaba',  'g15',  'glcd', 'glcdlib', 'glk',
       'hd44780', 'icp_a106', 'imon', 'imonlcd', 'IOWarrior',  'irman',  'joy',  'lb216',  'lcdm001',  'lcterm',
       'linux_input',   'lirc',   'lis',  'MD8800',  'mdm166a',  'ms6931',  'mtc_s16209x',  'MtxOrb',  'mx5000',
       'NoritakeVFD', 'Olimex_MOD_LCD1x9', 'picolcd', 'pyramid', 'rawserial', 'sdeclcd',  'sed1330',  'sed1520',
       'serialPOS',  'serialVFD',  'shuttleVFD',  'sli',  'stv5730',  'svga', 't6963', 'text', 'tyan', 'ula200',
       'vlsys_m428', 'xosd', 'yard2LCD'.

   DriverPath
       Where can we find the driver modules ?  IMPORTANT: Make sure to change this setting to reflect your
                  specific setup! Otherwise LCDd won't be able to find
                  the driver modules and will thus not be able to
                  function properly.  NOTE: Always place a slash as last character !  Optional. Type uniline.

       Note: DriverPath is computed with

        use Dpkg::Arch qw/get_host_arch debarch_to_multiarch/;
                     my $triplet = debarch_to_multiarch(get_host_arch());
                     "/usr/lib/$triplet/lcdproc/";

       and with:

       •

   Foreground
       The server will stay in the foreground if set to yes.  Optional. Type uniline.

       upstream_default value :
           no,legal:yes,no

   FrameInterval
       Sets the interval in microseconds for updating the display.  default is 125000  meaning  8Hz.   Optional.
       Type uniline.

       upstream_default value :
           125000

   GoodBye
        Optional. Type list of uniline.

   Heartbeat
       Set  master  heartbeat  setting.  If set to 'open' a client may control the heartbeat for its own screens
       (only).  Optional. Type enum. choice: 'off', 'open', 'on'.

       upstream_default value :
           open

   Hello
        Optional. Type list of uniline.

   NextScreenKey
        Optional. Type uniline.

       default value :
           Right

   Port
       Listen on this specified port.  Optional. Type integer.

       upstream_default value :
           13666

   PrevScreenKey
        Optional. Type uniline.

       default value :
           Left

   ReportLevel
       Sets the reporting level; defaults to warnings and errors only.  Optional. Type integer.

       upstream_default value :
           2

   ReportToSyslog
       Should we report to syslog instead of stderr?  Optional. Type boolean.

       default value :
           yes

   ScrollDownKey
        Optional. Type uniline.

       upstream_default value :
           Down

   ScrollUpKey
        Optional. Type uniline.

       upstream_default value :
           Up

   ServerScreen
       If yes, the the serverscreen will be rotated as a usual info screen. If  no,  it  will  be  a  background
       screen,  only  visible  when no other screens are active. The special value 'blank' is similar to no, but
       only a blank screen is displayed.  Optional. Type enum. choice: 'on', 'off', 'blank'.

       upstream_default value :
           on

   TitleSpeed
       set title scrolling speed  Optional. Type integer.

       upstream_default value :
           10

   ToggleRotateKey
       The "...Key=" lines define what the server does  with  keypresses  that  don't  go  to  any  client.  The
       ToggleRotateKey  stops  rotation  of screens, while the PrevScreenKey and NextScreenKey go back / forward
       one screen (even if rotation is disabled.  Assign the key string returned by the  driver  to  the  ...Key
       setting. These are the defaults:  Optional. Type uniline.

       default value :
           Enter

   User
       User  to  run  as.   LCDd  will  drop  its  root privileges and run as this user instead.  Optional. Type
       uniline.

   WaitTime
       Sets the default time in seconds to displays a screen.  Optional. Type integer.

       upstream_default value :
           4

SEE ALSO

       •   cme

perl v5.40.1                                       2025-03-04              Config::Model:...s::LCDd::server(3pm)