NAME

       Config::Model::models::LCDd::glcd - Configuration class LCDd::glcd

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Brightness
       Set brightness of the backlight if the backlight is switched 'on'.  Optional. Type integer.

       upstream_default value :
           800

   CellSize
       Width  and  height of a character cell in pixels. This value is only used if the driver has been compiled
       with FreeType and it is enabled. Otherwise the default 6x8 cell is used.  Optional. Type uniline.

       upstream_default value :
           12x16

   ConnectionType
       Select what type of connection. See documentation for types.  Optional. Type uniline.

       default value :
           t6963

   Contrast
       Set the initial contrast if supported by connection type.  Optional. Type integer.

       upstream_default value :
           600

   KeyMap_A
       Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'.  By default keys 'A'  to  'F'
       are assigned Up, Down, Left, Right, Enter, Escape.  Optional. Type uniline.

       default value :
           Up

   KeyMap_B
        Optional. Type uniline.

       default value :
           Down

   KeyMap_C
        Optional. Type uniline.

       default value :
           Enter

   KeyMap_D
        Optional. Type uniline.

       default value :
           Escape

   KeyRepeatDelay
       Time  (ms)  from  first  key report to first repeat. Set to 0 to disable repeated key reports.  Optional.
       Type integer.

       upstream_default value :
           500

   KeyRepeatInterval
       Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled (set to  zero).   Optional.
       Type integer.

       upstream_default value :
           300

   OffBrightness
       Set  brightness  of the backlight if the backlight is switched 'off'. Set this to zero to completely turn
       off the backlight.  Optional. Type integer.

       upstream_default value :
           100

   Port
       --- t6963 options --- Parallel port to use legal: 0x200-0x400  Optional. Type uniline.

       upstream_default value :
           0x378

   Size
       Width and height of the display in pixel. The supported sizes may depend on the  ConnectionType.   legal:
       1x1-640x480  Optional. Type uniline.

       upstream_default value :
           128x64

   bidirectional
       Use LPT port in bi-directional mode. This should work on most LPT port and is required for proper timing!
       Optional. Type boolean.

       upstream_default value :
           yes

   delayBus
       Insert additional delays into reads / writes.  Optional. Type boolean.

       upstream_default value :
           no

   fontHasIcons
       Some  fonts  miss  the Unicode characters used to represent icons. In this case the built-in 5x8 font can
       used if this option is turned off.  Optional. Type boolean.

       upstream_default value :
           yes

   normal_font
       Path to font file to use for FreeType rendering. This font must be  monospace  and  should  contain  some
       special   Unicode   characters   like   arrows  (Andale  Mono  is  recommended  and  can  be  fetched  at
       http://corefonts.sf.net).  Optional. Type uniline.

       upstream_default value :
           /usr/local/lib/X11/fonts/TTF/andalemo.ttf

   picolcdgfx_Inverted
       Inverted: Inverts the pixels.  Optional. Type enum. choice: 'yesorno'.

       upstream_default value :
           no

   picolcdgfx_KeyTimeout
       --- picolcdgfx options --- Time in ms for usb_read to wait on a key press.  Optional. Type integer.

       upstream_default value :
           125

   serdisp_device
       The display device to use, e.g. serraw:/dev/ttyS0,  parport:/dev/parport0  or  USB:07c0/1501.   Optional.
       Type uniline.

       default value :
           /dev/ppi0

   serdisp_name
       ---  serdisplib  options  ---  Name  of  the  underlying serdisplib driver, e.g. ctinclud. See serdisplib
       documentation for details.  Optional. Type uniline.

       default value :
           t6963

   serdisp_options
       Options string to pass to serdisplib during initialization. Use this to set any display  related  options
       (e.g.  wiring). The display size is always set based on the Size configured above! By default, no options
       are set.  Important: The value must be quoted as it contains equal signs!  Optional. Type uniline.

       upstream_default value :
           INVERT=1

   useFT2
       If LCDproc has been  compiled  with  FreeType  2  support  this  option  can  be  used  to  turn  if  off
       intentionally.  Optional. Type boolean.

       upstream_default value :
           yes

   x11_BacklightColor
       BacklightColor: The color of the backlight as full brightness.  Optional. Type uniline.

       upstream_default value :
           0x80FF80

   x11_Border
       Border: Adds a border (empty space) around the LCD portion of X11 window.  Optional. Type uniline.

       upstream_default value :
           20

   x11_Inverted
       Inverted: inverts the pixels  Optional. Type boolean.

       upstream_default value :
           no

   x11_PixelColor
       Colors  are  in  RRGGBB  format  prefixed with "0x".  PixelColor: The color of each dot at full contrast.
       Optional. Type uniline.

       upstream_default value :
           0x000000

   x11_PixelSize
       --- x11 options --- PixelSize is size of each dot in pixels + a pixel gap.  Optional. Type uniline.

       upstream_default value :
           3+1

SEE ALSO

       •   cme

perl v5.40.1                                       2025-03-04             Config::Model::models::LCDd::glcd(3pm)