NAME

       atalkd - userland AppleTalk network manager daemon

SYNOPSIS

       atalkd [-f configfile] [-P pidfile] [-1] [-2] [-d] [-t]

       atalkd [-v | -V]

DESCRIPTION

       atalkd is responsible for all user level AppleTalk network management. This includes routing, name
       registration and lookup, zone lookup, and the AppleTalk Echo Protocol (similar to ping(8)). Specifically,
       this corresponds to the RTMP, NBP, ZIP, and AEP protocols in the AppleTalk protocol family.

       The init system of your OS will typically start the atalkd daemon at bootup. The daemon first reads from
       its configuration file, atalkd.conf. If there is no configuration file, or if no interfaces have been
       defined, atalkd will attempt to configure all available interfaces and will create a configuration file.
       See atalkd.conf(5) for details on the configuration file format.

OPTIONS

       -1
           Forces AppleTalk Phase 1.

       -2
           Forces AppleTalk Phase 2.

       -d
           Do not disassociate daemon from terminal. Writes some additional debugging information to stdout.

       -f configfile
           Consult configfile instead of atalkd.conf for the configuration information.

       -P pidfile
           Specifies the file in which atalkd stores its process id.

       -t
           Turns on transition routing.

       -v | -V
           Print version information and exit.

ROUTING

       If you are connecting an atalkd router to an existing AppleTalk network, you should first contact your
       local network administrators to obtain appropriate network addresses.

       atalkd can provide routing between interfaces by configuring multiple interfaces. Each interface must be
       assigned a unique net-range between 1 and 65279 (0 and 65535 are illegal, and addresses between 65280 and
       65534 are reserved for startup). It is best to choose the smallest useful net-range, i.e. if you have
       three machines on a LAN, choose a net-range below 1000. Each net-range may have an arbitrary list of
       zones associated with it.

       Note that atalkd automatically acts as a router if there is more than one interface, and no other
       configurations are present.

FILES

       atalkd.conf configuration file

SEE ALSO

       atalkd.conf(5)

AUTHOR

       See CONTRIBUTORS[1]

NOTES

        1. CONTRIBUTORS
           https://netatalk.io/contributors

Netatalk 4.1.2                                     24 May 2024                                         ATALKD(8)