Provided by: ruby-bundler_2.6.3-1_all 
NAME
Gemfile - A format for describing gem dependencies for Ruby programs
SYNOPSIS
A Gemfile describes the gem dependencies required to execute associated Ruby code.
Place the Gemfile in the root of the directory containing the associated code. For instance, in a Rails
application, place the Gemfile in the same directory as the Rakefile.
SYNTAX
A Gemfile is evaluated as Ruby code, in a context which makes available a number of methods used to
describe the gem requirements.
GLOBAL SOURCE
At the top of the Gemfile, add a single line for the RubyGems source that contains the gems listed in the
Gemfile.
source "https://rubygems.org"
You can add only one global source. In Bundler 1.13, adding multiple global sources was deprecated. The
source MUST be a valid RubyGems repository.
To use more than one source of RubyGems, you should use source block.
A source is checked for gems following the heuristics described in SOURCE PRIORITY.
Note about a behavior of the feature deprecated in Bundler 1.13: If a gem is found in more than one
global source, Bundler will print a warning after installing the gem indicating which source was used,
and listing the other sources where the gem is available. A specific source can be selected for gems that
need to use a non-standard repository, suppressing this warning, by using the :source option or source
block.
CREDENTIALS
Some gem sources require a username and password. Use bundle config(1) bundle-config.1.html to set the
username and password for any of the sources that need it. The command must be run once on each computer
that will install the Gemfile, but this keeps the credentials from being stored in plain text in version
control.
bundle config gems.example.com user:password
For some sources, like a company Gemfury account, it may be easier to include the credentials in the
Gemfile as part of the source URL.
source "https://user:password@gems.example.com"
Credentials in the source URL will take precedence over credentials set using config.
RUBY
If your application requires a specific Ruby version or engine, specify your requirements using the ruby
method, with the following arguments. All parameters are OPTIONAL unless otherwise specified.
VERSION (required)
The version of Ruby that your application requires. If your application requires an alternate Ruby
engine, such as JRuby, TruffleRuby, etc., this should be the Ruby version that the engine is compatible
with.
ruby "3.1.2"
If you wish to derive your Ruby version from a version file (ie .ruby-version), you can use the file
option instead.
ruby file: ".ruby-version"
The version file should conform to any of the following formats:
• 3.1.2 (.ruby-version)
• ruby 3.1.2 (.tool-versions, read: https://asdf-vm.com/manage/configuration.html#tool-versions)
ENGINE
Each application may specify a Ruby engine. If an engine is specified, an engine version must also be
specified.
What exactly is an Engine?
• A Ruby engine is an implementation of the Ruby language.
• For background: the reference or original implementation of the Ruby programming language is called
Matz's Ruby Interpreter https://en.wikipedia.org/wiki/Ruby_MRI, or MRI for short. This is named after
Ruby creator Yukihiro Matsumoto, also known as Matz. MRI is also known as CRuby, because it is
written in C. MRI is the most widely used Ruby engine.
• Other implementations https://www.ruby-lang.org/en/about/ of Ruby exist. Some of the more well-known
implementations include JRuby https://www.jruby.org/ and TruffleRuby https://www.graalvm.org/ruby/.
Rubinius is an alternative implementation of Ruby written in Ruby. JRuby is an implementation of Ruby
on the JVM, short for Java Virtual Machine. TruffleRuby is a Ruby implementation on the GraalVM, a
language toolkit built on the JVM.
ENGINE VERSION
Each application may specify a Ruby engine version. If an engine version is specified, an engine must
also be specified. If the engine is "ruby" the engine version specified must match the Ruby version.
ruby "2.6.8", engine: "jruby", engine_version: "9.3.8.0"
PATCHLEVEL
Each application may specify a Ruby patchlevel. Specifying the patchlevel has been meaningless since Ruby
2.1.0 was released as the patchlevel is now uniquely determined by a combination of major, minor, and
teeny version numbers.
This option was implemented in Bundler 1.4.0 for Ruby 2.0 or earlier.
ruby "3.1.2", patchlevel: "20"
GEMS
Specify gem requirements using the gem method, with the following arguments. All parameters are OPTIONAL
unless otherwise specified.
NAME (required)
For each gem requirement, list a single gem line.
gem "nokogiri"
VERSION
Each gem MAY have one or more version specifiers.
gem "nokogiri", ">= 1.4.2"
gem "RedCloth", ">= 4.1.0", "< 4.2.0"
REQUIRE AS
Each gem MAY specify files that should be used when autorequiring via Bundler.require. You may pass an
array with multiple files or true if the file you want required has the same name as gem or false to
prevent any file from being autorequired.
gem "redis", require: ["redis/connection/hiredis", "redis"]
gem "webmock", require: false
gem "byebug", require: true
The argument defaults to the name of the gem. For example, these are identical:
gem "nokogiri"
gem "nokogiri", require: "nokogiri"
gem "nokogiri", require: true
GROUPS
Each gem MAY specify membership in one or more groups. Any gem that does not specify membership in any
group is placed in the default group.
gem "rspec", group: :test
gem "wirble", groups: [:development, :test]
The Bundler runtime allows its two main methods, Bundler.setup and Bundler.require, to limit their impact
to particular groups.
# setup adds gems to Ruby's load path
Bundler.setup # defaults to all groups
require "bundler/setup" # same as Bundler.setup
Bundler.setup(:default) # only set up the _default_ group
Bundler.setup(:test) # only set up the _test_ group (but `not` _default_)
Bundler.setup(:default, :test) # set up the _default_ and _test_ groups, but no others
# require requires all of the gems in the specified groups
Bundler.require # defaults to the _default_ group
Bundler.require(:default) # identical
Bundler.require(:default, :test) # requires the _default_ and _test_ groups
Bundler.require(:test) # requires the _test_ group
The Bundler CLI allows you to specify a list of groups whose gems bundle install should not install with
the without configuration.
To specify multiple groups to ignore, specify a list of groups separated by spaces.
bundle config set --local without test
bundle config set --local without development test
Also, calling Bundler.setup with no parameters, or calling require "bundler/setup" will setup all groups
except for the ones you excluded via --without (since they are not available).
Note that on bundle install, bundler downloads and evaluates all gems, in order to create a single
canonical list of all of the required gems and their dependencies. This means that you cannot list
different versions of the same gems in different groups. For more details, see Understanding Bundler
https://bundler.io/rationale.html.
PLATFORMS
If a gem should only be used in a particular platform or set of platforms, you can specify them.
Platforms are essentially identical to groups, except that you do not need to use the --without
install-time flag to exclude groups of gems for other platforms.
There are a number of Gemfile platforms:
ruby C Ruby (MRI), Rubinius, or TruffleRuby, but not Windows
mri C Ruby (MRI) only, but not Windows
windows
Windows C Ruby (MRI), including RubyInstaller 32-bit and 64-bit versions
mswin Windows C Ruby (MRI), including RubyInstaller 32-bit versions
mswin64
Windows C Ruby (MRI), including RubyInstaller 64-bit versions
rbx Rubinius
jruby JRuby
truffleruby
TruffleRuby
On platforms ruby, mri, mswin, mswin64, and windows, you may additionally specify a version by appending
the major and minor version numbers without a delimiter. For example, to specify that a gem should only
be used on platform ruby version 3.1, use:
ruby_31
As with groups (above), you may specify one or more platforms:
gem "weakling", platforms: :jruby
gem "ruby-debug", platforms: :mri_31
gem "nokogiri", platforms: [:windows_31, :jruby]
All operations involving groups (bundle install bundle-install.1.html, Bundler.setup, Bundler.require)
behave exactly the same as if any groups not matching the current platform were explicitly excluded.
The following platform values are deprecated and should be replaced with windows:
• mswin, mswin64, mingw32, x64_mingw
Note that, while unfortunately using the same terminology, the values of this option are different from
the values that bundle lock --add-platform can take. The values of this option are more closer to "Ruby
Implementation" while the values that bundle lock --add-platform understands are more related to OS and
architecture of the different systems where your lockfile will be used.
FORCE_RUBY_PLATFORM
If you always want the pure ruby variant of a gem to be chosen over platform specific variants, you can
use the force_ruby_platform option:
gem "ffi", force_ruby_platform: true
This can be handy (assuming the pure ruby variant works fine) when:
• You're having issues with the platform specific variant.
• The platform specific variant does not yet support a newer ruby (and thus has a required_ruby_version
upper bound), but you still want your Gemfile{.lock} files to resolve under that ruby.
SOURCE
You can select an alternate RubyGems repository for a gem using the ':source' option.
gem "some_internal_gem", source: "https://gems.example.com"
This forces the gem to be loaded from this source and ignores the global source declared at the top level
of the file. If the gem does not exist in this source, it will not be installed.
Bundler will search for child dependencies of this gem by first looking in the source selected for the
parent, but if they are not found there, it will fall back on the global source.
Note about a behavior of the feature deprecated in Bundler 1.13: Selecting a specific source repository
this way also suppresses the ambiguous gem warning described above in GLOBAL SOURCE.
Using the :source option for an individual gem will also make that source available as a possible global
source for any other gems which do not specify explicit sources. Thus, when adding gems with explicit
sources, it is recommended that you also ensure all other gems in the Gemfile are using explicit sources.
GIT
If necessary, you can specify that a gem is located at a particular git repository using the :git
parameter. The repository can be accessed via several protocols:
HTTP(S)
gem "rails", git: "https://github.com/rails/rails.git"
SSH gem "rails", git: "git@github.com:rails/rails.git"
git gem "rails", git: "git://github.com/rails/rails.git"
If using SSH, the user that you use to run bundle install MUST have the appropriate keys available in
their $HOME/.ssh.
NOTE: http:// and git:// URLs should be avoided if at all possible. These protocols are unauthenticated,
so a man-in-the-middle attacker can deliver malicious code and compromise your system. HTTPS and SSH are
strongly preferred.
The group, platforms, and require options are available and behave exactly the same as they would for a
normal gem.
A git repository SHOULD have at least one file, at the root of the directory containing the gem, with the
extension .gemspec. This file MUST contain a valid gem specification, as expected by the gem build
command.
If a git repository does not have a .gemspec, bundler will attempt to create one, but it will not contain
any dependencies, executables, or C extension compilation instructions. As a result, it may fail to
properly integrate into your application.
If a git repository does have a .gemspec for the gem you attached it to, a version specifier, if
provided, means that the git repository is only valid if the .gemspec specifies a version matching the
version specifier. If not, bundler will print a warning.
gem "rails", "2.3.8", git: "https://github.com/rails/rails.git"
# bundle install will fail, because the .gemspec in the rails
# repository's master branch specifies version 3.0.0
If a git repository does not have a .gemspec for the gem you attached it to, a version specifier MUST be
provided. Bundler will use this version in the simple .gemspec it creates.
Git repositories support a number of additional options.
branch, tag, and ref
You MUST only specify at most one of these options. The default is branch: "master". For example:
gem "rails", git: "https://github.com/rails/rails.git", branch: "5-0-stable"
gem "rails", git: "https://github.com/rails/rails.git", tag: "v5.0.0"
gem "rails", git: "https://github.com/rails/rails.git", ref: "4aded"
submodules
For reference, a git submodule https://git-scm.com/book/en/v2/Git-Tools-Submodules lets you have
another git repository within a subfolder of your repository. Specify submodules: true to cause
bundler to expand any submodules included in the git repository
If a git repository contains multiple .gemspecs, each .gemspec represents a gem located at the same place
in the file system as the .gemspec.
|~rails [git root]
| |-rails.gemspec [rails gem located here]
|~actionpack
| |-actionpack.gemspec [actionpack gem located here]
|~activesupport
| |-activesupport.gemspec [activesupport gem located here]
|...
To install a gem located in a git repository, bundler changes to the directory containing the gemspec,
runs gem build name.gemspec and then installs the resulting gem. The gem build command, which comes
standard with Rubygems, evaluates the .gemspec in the context of the directory in which it is located.
GIT SOURCE
A custom git source can be defined via the git_source method. Provide the source's name as an argument,
and a block which receives a single argument and interpolates it into a string to return the full repo
address:
git_source(:stash){ |repo_name| "https://stash.corp.acme.pl/#{repo_name}.git" }
gem 'rails', stash: 'forks/rails'
In addition, if you wish to choose a specific branch:
gem "rails", stash: "forks/rails", branch: "branch_name"
GITHUB
NOTE: This shorthand should be avoided until Bundler 2.0, since it currently expands to an insecure
git:// URL. This allows a man-in-the-middle attacker to compromise your system.
If the git repository you want to use is hosted on GitHub and is public, you can use the :github
shorthand to specify the github username and repository name (without the trailing ".git"), separated by
a slash. If both the username and repository name are the same, you can omit one.
gem "rails", github: "rails/rails"
gem "rails", github: "rails"
Are both equivalent to
gem "rails", git: "https://github.com/rails/rails.git"
Since the github method is a specialization of git_source, it accepts a :branch named argument.
You can also directly pass a pull request URL:
gem "rails", github: "https://github.com/rails/rails/pull/43753"
Which is equivalent to:
gem "rails", github: "rails/rails", branch: "refs/pull/43753/head"
GIST
If the git repository you want to use is hosted as a GitHub Gist and is public, you can use the :gist
shorthand to specify the gist identifier (without the trailing ".git").
gem "the_hatch", gist: "4815162342"
Is equivalent to:
gem "the_hatch", git: "https://gist.github.com/4815162342.git"
Since the gist method is a specialization of git_source, it accepts a :branch named argument.
BITBUCKET
If the git repository you want to use is hosted on Bitbucket and is public, you can use the :bitbucket
shorthand to specify the bitbucket username and repository name (without the trailing ".git"), separated
by a slash. If both the username and repository name are the same, you can omit one.
gem "rails", bitbucket: "rails/rails"
gem "rails", bitbucket: "rails"
Are both equivalent to
gem "rails", git: "https://rails@bitbucket.org/rails/rails.git"
Since the bitbucket method is a specialization of git_source, it accepts a :branch named argument.
PATH
You can specify that a gem is located in a particular location on the file system. Relative paths are
resolved relative to the directory containing the Gemfile.
Similar to the semantics of the :git option, the :path option requires that the directory in question
either contains a .gemspec for the gem, or that you specify an explicit version that bundler should use.
Unlike :git, bundler does not compile C extensions for gems specified as paths.
gem "rails", path: "vendor/rails"
If you would like to use multiple local gems directly from the filesystem, you can set a global path
option to the path containing the gem's files. This will automatically load gemspec files from
subdirectories.
path 'components' do
gem 'admin_ui'
gem 'public_ui'
end
BLOCK FORM OF SOURCE, GIT, PATH, GROUP and PLATFORMS
The :source, :git, :path, :group, and :platforms options may be applied to a group of gems by using block
form.
source "https://gems.example.com" do
gem "some_internal_gem"
gem "another_internal_gem"
end
git "https://github.com/rails/rails.git" do
gem "activesupport"
gem "actionpack"
end
platforms :ruby do
gem "ruby-debug"
gem "sqlite3"
end
group :development, optional: true do
gem "wirble"
gem "faker"
end
In the case of the group block form the :optional option can be given to prevent a group from being
installed unless listed in the --with option given to the bundle install command.
In the case of the git block form, the :ref, :branch, :tag, and :submodules options may be passed to the
git method, and all gems in the block will inherit those options.
The presence of a source block in a Gemfile also makes that source available as a possible global source
for any other gems which do not specify explicit sources. Thus, when defining source blocks, it is
recommended that you also ensure all other gems in the Gemfile are using explicit sources, either via
source blocks or :source directives on individual gems.
INSTALL_IF
The install_if method allows gems to be installed based on a proc or lambda. This is especially useful
for optional gems that can only be used if certain software is installed or some other conditions are
met.
install_if -> { RUBY_PLATFORM =~ /darwin/ } do
gem "pasteboard"
end
GEMSPEC
The .gemspec https://guides.rubygems.org/specification-reference/ file is where you provide metadata
about your gem to Rubygems. Some required Gemspec attributes include the name, description, and homepage
of your gem. This is also where you specify the dependencies your gem needs to run.
If you wish to use Bundler to help install dependencies for a gem while it is being developed, use the
gemspec method to pull in the dependencies listed in the .gemspec file.
The gemspec method adds any runtime dependencies as gem requirements in the default group. It also adds
development dependencies as gem requirements in the development group. Finally, it adds a gem requirement
on your project (path: '.'). In conjunction with Bundler.setup, this allows you to require project files
in your test code as you would if the project were installed as a gem; you need not manipulate the load
path manually or require project files via relative paths.
The gemspec method supports optional :path, :glob, :name, and :development_group options, which control
where bundler looks for the .gemspec, the glob it uses to look for the gemspec (defaults to:
{,*,*/*}.gemspec), what named .gemspec it uses (if more than one is present), and which group development
dependencies are included in.
When a gemspec dependency encounters version conflicts during resolution, the local version under
development will always be selected -- even if there are remote versions that better match other
requirements for the gemspec gem.
SOURCE PRIORITY
When attempting to locate a gem to satisfy a gem requirement, bundler uses the following priority order:
1. The source explicitly attached to the gem (using :source, :path, or :git)
2. For implicit gems (dependencies of explicit gems), any source, git, or path repository declared on
the parent. This results in bundler prioritizing the ActiveSupport gem from the Rails git repository
over ones from rubygems.org
3. If neither of the above conditions are met, the global source will be used. If multiple global
sources are specified, they will be prioritized from last to first, but this is deprecated since
Bundler 1.13, so Bundler prints a warning and will abort with an error in the future.
January 2025 GEMFILE(5)