Provided by: barman_3.12.1-1_all 
NAME
barman - Barman Configurations
Barman follows a convention over configuration approach, which simplifies configuration by allowing some
options to be defined globally and overridden at the server level. This means you can set a default
behavior for your servers and then customize specific servers as needed. This design reduces the need for
excessive configuration while maintaining flexibility.
USAGE
Proper configuration is critical for its effective operation. Barman uses different types of
configuration files to manage global settings, server-specific settings, and model-specific settings that
is made up of three scopes:
1. Global Configuration: It comprises one file with a set of configurations for the barman system, such
as the main directory, system user, log file, and other general options. Default location is
/etc/barman.conf and it can be overridden on a per-user level by ~/.barman.conf or by specifying a .conf
file using the -c / --config with the barman command directly in the CLI.
2. Server Configuration: It comprises one or more files with a set of configurations for a Postgres
server that you want to keep track and interact for backup, recovery and/or replication. Default location
is /etc/barman.d and must use the .conf suffix. You may have one or multiple files for servers. You can
override the default location by setting the configuration_files_directory option in the global
configuration file and placing the files in that particular location.
3. Model Configuration: It comprises one or more files with a set of configurations overrides that can be
applied to Barman servers within the same cluster as the model. These overrides can be implemented using
the barman config-switch command. Default location is /etc/barman.d and must use the .conf suffix. The
same configuration_files_directory override option from the server configuration applies for models. You
may have one or multiple files for models.
NOTE:
Historically, you could have a single configuration file containing global, server, and model options,
but, for maintenance reasons, this approach is deprecated.
Configuration files follow the INI format and consist of sections denoted by headers in square brackets.
Each section can include various options.
Models and servers must have unique identifiers, and reserved words cannot be used as names.
Reserved Words
The following reserved words cannot be used as server or model names:
• barman: Identifies the global section.
• all: A special shortcut for executing commands on all managed servers.
Parameter Types
Configuration options can be of the following types:
• String: Textual data (e.g., file paths, names).
• Enum: Enumerated values, often limited to predefined choices.
• Integer: Numeric values.
• Boolean: Can be on, true, 1 (true) or off, false, 0 (false).
NOTE:
Some enums allow off, but not false.
OPTIONS
Options in the configuration files can have specific or shared scopes. The following configuration
options are used not only for configuring how Barman will execute backups and recoveries, but also for
configuring various aspects of how Barman interacts with the configured Postgres servers to be able to
apply your Backup and Recovery, and High-Availability strategies.
General
These are general configurations options.
active
When this option is set to true (default), the server operates fully. If set to false, the server is
restricted to diagnostic use only, meaning that operational commands such as backup execution or WAL
archiving are temporarily disabled. When incorporating a new server into Barman, we recommend initially
setting active = false. Verify that barman check shows no issues before activating the server. This
approach helps prevent excessive error logging in Barman during the initial setup.
Scope: Server / Model.
archiver
This option enables log file shipping through Postgres' archive_command for a server. When set to true,
Barman expects continuous archiving to be configured and will manage WAL files that Postgres stores in
the incoming directory (incoming_wals_directory), including their checks, handling, and compression. When
set to false (default), continuous archiving is disabled.
NOTE:
If neither archiver nor streaming_archiver is configured, Barman will automatically set this option to
true to maintain compatibility with the previous default behavior where archiving was enabled by
default.
Scope: Global / Server / Model.
archiver_batch_size
This option enables batch processing of WAL files for the archiver process by setting it to a value
greater than 0. If not set, the archiver will use unlimited (default) processing mode for the WAL queue.
With batch processing enabled, the archiver process will handle a maximum of archiver_batch_size WAL
segments per run. This value must be an integer.
Scope: Global / Server / Model.
bandwidth_limit
Specifies the maximum transfer rate in kilobytes per second for backup and recovery operations. A value
of 0 indicates no limit (default).
NOTE:
Applies only when backup_method = postgres | rsync.
Scope: Global / Server / Model.
barman_home
Designates the main data directory for Barman. Defaults to /var/lib/barman.
Scope: Global.
barman_lock_directory
Specifies the directory for lock files. The default is barman_home.
NOTE:
The barman_lock_directory should be on a non-network local filesystem.
Scope: Global.
basebackup_retry_sleep
Sets the number of seconds to wait after a failed base backup copy before retrying. Default is 30
seconds. Must be a non-negative integer.
NOTE:
This applies to both backup and recovery operations.
Scope: Global / Server / Model.
basebackup_retry_times
Defines the number of retry attempts for a base backup copy after an error occurs. Default is 0 (no
retries). Must be a non-negative integer.
NOTE:
This applies to both backup and recovery operations.
Scope: Global / Server / Model.
check_timeout
Sets the maximum execution time in seconds for a Barman check command per server. Set to 0 to disable the
timeout. Default is 30 seconds. Must be a non-negative integer.
Scope: Global / Server / Model.
cluster
Tag the server or model to an associated cluster name. Barman uses this association to override
configuration for all servers/models in this cluster. If omitted for servers, it defaults to the server's
name.
NOTE:
Must be specified for configuration models to group applicable servers.
Scope: Server / Model.
config_changes_queue
Designates the filesystem location for Barman's queue that handles configuration changes requested via
the barman config-update command. This queue manages the serialization and retry of configuration change
requests. By default, Barman writes to a file named cfg_changes.queue under barman_home.
Scope: Global.
configuration_files_directory
Designates the directory where server/model configuration files will be read by Barman. Defaults to
/etc/barman.d/.
Scope: Global.
conninfo
Specifies the connection string used by Barman to connect to the Postgres server. This is a libpq
connection string. Commonly used keys include: host, hostaddr, port, dbname, user and password. See the ‐
PostgreSQL documentation for details.
Scope: Server / Model.
create_slot
Determines whether Barman should automatically create a replication slot if it's not already present for
streaming WAL files. When set to auto and slot_name is defined, Barman will attempt to create the slot
automatically. When set to manual (default), the replication slot must be created manually.
Scope: Global / Server / Model.
description
Provides a human-readable description of a server.
Scope: Server / Model.
errors_directory
The directory where WAL files that were errored while being archived by Barman are stored. This includes
duplicate WAL files (e.g., an archived WAL file that has already been streamed but have different hash)
and unexpected files found in the WAL archive directory.
The purpose of placing the files in this directory is so someone can later review why they failed to be
archived and take appropriate actions (dispose of, store somewhere else, replace the duplicate file
archived before, etc.)
Scope: Server.
forward_config_path
Determines whether a passive node should forward its configuration file path to its primary node during
cron or sync-info commands. Set to true if Barman is invoked with the -c / --config option and the
configuration paths are identical on both passive and primary Barman servers. Defaults to false.
Scope: Global / Server / Model.
immediate_checkpoint
Controls how Postgres handles checkpoints at the start of a backup. Set to false (default) to allow the
checkpoint to complete according to checkpoint_completion_target. Set to true for an immediate
checkpoint, where Postgres completes the checkpoint as quickly as possible.
Scope: Global / Server / Model.
keepalive_interval
Sets the interval in seconds for sending a heartbeat query to keep the libpq connection active during an
rsync backup. Default is 60 seconds. Setting this to 0 disables the heartbeat.
Scope: Global / Server / Model.
lock_directory_cleanup
Enables automatic cleanup of unused lock files in the barman_lock_directory.
Scope: Global.
log_file
Specifies the location of Barman's log file. Defaults to /var/log/barman/barman.log.
Scope: Global.
log_level
Sets the level of logging. Options include: DEBUG, INFO, WARNING, ERROR and CRITICAL.
Scope: Global.
minimum_redundancy
Specifies the minimum number of backups to retain. Default is 0.
Scope: Global / Server / Model.
model
When set to true, turns a server section from a configuration file into a model for a cluster. There is
no false option in this case. If you want to simulate a false option, comment out (#model=true) or remove
the option in the configuration. Defaults to the server name.
Scope: Model.
network_compression
Enables or disables data compression for network transfers. Set to false (default) to disable
compression, or true to enable it and reduce network usage.
Scope: Global / Server / Model.
parallel_jobs
Controls the number of parallel workers used to copy files during backup or recovery. It must be a
positive integer. Default is 1.
NOTE:
Applies only when backup_method = rsync.
Scope: Global / Server / Model.
parallel_jobs_start_batch_period
Specifies the time interval in seconds over which a single batch of parallel jobs will start. Default is
1 second. This means that if parallel_jobs_start_batch_size is 10 and parallel_jobs_start_batch_period is
1, this will yield an effective rate limit of 10 jobs per second, because there is a maximum of 10 jobs
that can be started within 1 second.
NOTE:
Applies only when backup_method = rsync.
Scope: Global / Server / Model.
parallel_jobs_start_batch_size
Defines the maximum number of parallel jobs to start in a single batch. Default is 10 jobs. This means
that if parallel_jobs_start_batch_size is 10 and parallel_jobs_start_batch_period is 2, this will yield a
maximum of 10 jobs that can be started within 2 seconds.
NOTE:
Applies only when backup_method = rsync.
Scope: Global / Server / Model.
path_prefix
Lists one or more absolute paths, separated by colons, where Barman looks for executable files. These
paths are checked before the PATH environment variable. This option can be set for each server and needs
to point to the bin directory for the appropriate PG_MAJOR_VERSION.
Scope: Global / Server / Model.
primary_checkpoint_timeout
Time to wait for new WAL files before forcing a checkpoint on the primary server. Defaults to 0.
Scope: Server / Model.
primary_conninfo
Connection string for Barman to connect to the primary Postgres server during a standby backup.
Scope: Server / Model.
primary_ssh_command
SSH command for connecting to the primary Barman server if Barman is passive.
Scope: Global / Server / Model.
slot_name
Replication slot name for the receive-wal command when streaming_archiver is enabled.
Scope: Global / Server / Model.
ssh_command
SSH command used by Barman to connect to the Postgres server for rsync backups.
Scope: Server / Model.
streaming_archiver
Enables Postgres' streaming protocol for WAL files. Defaults to false.
NOTE:
If neither archiver nor streaming_archiver is configured, Barman will automatically set archiver
option to true to maintain compatibility with the previous default behavior where archiving was
enabled by default.
Scope: Global / Server / Model.
streaming_archiver_batch_size
Batch size for processing WAL files in streaming archiver. Defaults to 0.
Scope: Global / Server / Model.
streaming_archiver_name
Application name for the receive-wal command. Defaults to barman_receive_wal.
Scope: Global / Server / Model.
streaming_backup_name
Application name for the pg_basebackup command. Defaults to barman_streaming_backup.
Scope: Global / Server / Model.
streaming_conninfo
Connection string for streaming replication protocol. Defaults to conninfo.
Scope: Server / Model.
tablespace_bandwidth_limit
Maximum transfer rate for specific tablespaces for backup and recovery operations. A value of 0
indicates no limit (default).
NOTE:
Applies only when backup_method = rsync.
Scope: Global / Server / Model.
Backups
These configurations options are related to how Barman will execute backups.
autogenerate_manifest
This is a boolean option that allows for the automatic creation of backup manifest files. The manifest
file, which is a JSON document, lists all files included in the backup. It is generated upon completion
of the backup and saved in the backup directory. The format of the manifest file adheres to the
specifications outlined in the PostgreSQL documentation and is compatible with the pg_verifybackup tool.
Default is false.
NOTE:
This option is ignored if the backup_method is not rsync.
Scope: Global / Server / Model.
backup_compression
Specifies the compression method for the backup process. It can be set to gzip, lz4, zstd, or none.
Ensure that the CLI tool for the chosen compression method is available on both the Barman and Postgres
servers.
NOTE:
Note that lz4 and zstd require Postgres version 15 or later. Unsetting this option or using none
results in an uncompressed archive (default). Only supported when backup_method = postgres.
Scope: Global / Server / Model.
backup_compression_format
Determines the format pg_basebackup should use when saving compressed backups. Options are plain or tar,
with tar as the default if unset. The plain format is available only if Postgres version 15 or later is
in use and backup_compression_location is set to server.
NOTE:
Only supported when backup_method = postgres.
Scope: Global / Server / Model.
backup_compression_level
Defines the level of compression for backups as an integer. The permissible values depend on the
compression method specified in backup_compression.
NOTE:
Only supported when backup_method = postgres.
Scope: Global / Server / Model.
backup_compression_location
Specifies where compression should occur during the backup: either client or server. The server option is
available only if Postgres version 15 or later is being used.
NOTE:
Only supported when backup_method = postgres.
Scope: Global / Server / Model.
backup_compression_workers
Sets the number of threads used for compression during the backup process. This is applicable only when
backup_compression=zstd. The default value is 0, which uses the standard compression behavior.
NOTE:
Only supported when backup_method = postgres.
Scope: Global / Server / Model.
backup_directory
Specifies the directory where backup data for a server will be stored. Defaults to
<barman_home>/<server_name>.
Scope: Server.
backup_method
Defines the method Barman uses to perform backups. Options include:
• rsync (default): Executes backups using the rsync command over SSH (requires ssh_command).
• postgres: Uses the pg_basebackup command for backups.
• local-rsync: Assumes Barman runs on the same server and as the same user as the Postgres database,
performing an rsync file system copy.
• snapshot: Utilizes the API of the cloud provider specified in the snapshot_provider option to create
disk snapshots as defined in snapshot_disks and saves only the backup label and metadata to its own
storage.
Scope: Global / Server / Model.
backup_options
Controls how Barman interacts with Postgres during backups. This is a comma-separated list that can
include:
• concurrent_backup (default): Uses concurrent backup, recommended for Postgres versions 9.6 and later,
and supports backups from standby servers.
• exclusive_backup: Uses the deprecated exclusive backup method. Only for Postgres versions older than
15. This option will be removed in the future.
• external_configuration: Suppresses warnings about external configuration files during backup execution.
NOTE:
exclusive_backup and concurrent_backup cannot be used together.
Scope: Global / Server / Model.
basebackups_directory
Specifies the directory where base backups are stored. Defaults to <backup_directory>/base.
Scope: Server.
reuse_backup
Controls incremental backup support when using backup_method=rsync by reusing the last available backup.
The options are:
• off (default): Standard full backup.
• copy: File-level incremental backup, by reusing the last backup for a server and creating a copy of the
unchanged files (just for backup time reduction)
• link: File-level incremental backup, by reusing the last backup for a server and creating a hard link
of the unchanged files (for backup space and time reduction)
NOTE:
This option will be ignored when backup_method=postgres.
Scope: Global / Server / Model.
Cloud Backups
These configuration options are related to how Barman will execute backups in the cloud.
aws_await_snapshots_timeout
Specifies the duration in seconds to wait for AWS snapshots to be created before a timeout occurs. The
default value is 3600 seconds. This must be a positive integer.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_profile
The name of the AWS profile to use when authenticating with AWS (e.g. INI section in AWS credentials
file).
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_region
Indicates the AWS region where the EC2 VM and storage volumes, as defined by snapshot_instance and
snapshot_disks, are located.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_snapshot_lock_mode
The lock mode for the snapshot. This is only valid if snapshot_instance and snapshot_disk are set.
Allowed options:
• compliance.
• governance.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_snapshot_lock_duration
The lock duration is the period of time (in days) for which the snapshot is to remain locked, ranging
from 1 to 36,500. Set either the lock duration or the expiration date (not both).
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_snapshot_lock_cool_off_period
The cooling-off period is an optional period of time (in hours) that you can specify when you lock a
snapshot in compliance mode, ranging from 1 to 72.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
aws_snapshot_lock_expiration_date
The lock duration is determined by an expiration date in the future. It must be at least 1 day after the
snapshot creation date and time, using the format YYYY-MM-DDTHH:MM:SS.sssZ. Set either the lock duration
or the expiration date (not both).
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = aws.
Scope: Global / Server / Model.
azure_credential
Specifies the type of Azure credential to use for authentication, either azure-cli or managed-identity.
If not provided, the default Azure authentication method will be used.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = azure.
Scope: Global / Server / Model.
azure_resource_group
Specifies the name of the Azure resource group containing the compute instance and disks defined by
snapshot_instance and snapshot_disks.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = azure.
Scope: Global / Server / Model.
azure_subscription_id
Identifies the Azure subscription that owns the instance and storage volumes defined by snapshot_instance
and snapshot_disks.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = azure.
Scope: Global / Server / Model.
gcp_project
Specifies the ID of the GCP project that owns the instance and storage volumes defined by
snapshot_instance and snapshot_disks.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = gcp.
Scope: Global / Server / Model.
gcp_zone
Indicates the availability zone where the compute instance and disks are located for snapshot backups.
NOTE:
Only supported when backup_method = snapshot and snapshot_provider = gcp.
Scope: Server / Model.
snapshot_disks
This option is a comma-separated list of disks to include in cloud snapshot backups.
NOTE:
Required when backup_method = snapshot.
Ensure that the snapshot_disks list includes all disks that store Postgres data, as any data not on
these listed disks will not be included in the backup and will be unavailable during recovery.
Scope: Server / Model.
snapshot_instance
The name of the VM or compute instance where the storage volumes are attached.
NOTE:
Required when backup_method = snapshot.
Scope: Server / Model.
snapshot_provider
The name of the cloud provider to use for creating snapshots. Supported value: aws, azure and gcp.
NOTE:
Required when backup_method = snapshot.
Scope: Global / Server / Model.
Hook Scripts
These configuration options are related to the pre or post execution of hook scripts.
post_archive_retry_script
Specifies a hook script to run after a WAL file is archived. Barman will retry this script until it
returns SUCCESS (0), ABORT_CONTINUE (62), or ABORT_STOP (63). In a post-archive scenario, ABORT_STOP has
the same effect as ABORT_CONTINUE.
Scope: Global / Server.
post_archive_script
Specifies a hook script to run after a WAL file is archived, following the post_archive_retry_script.
Scope: Global / Server.
post_backup_retry_script
Specifies a hook script to run after a base backup. Barman will retry this script until it returns
SUCCESS (0), ABORT_CONTINUE (62), or ABORT_STOP (63). In a post-backup scenario, ABORT_STOP has the same
effect as ABORT_CONTINUE.
Scope: Global / Server.
post_backup_script
Specifies a hook script to run after a base backup, following the post_backup_retry_script.
Scope: Global / Server.
post_delete_retry_script
Specifies a hook script to run after deleting a backup. Barman will retry this script until it returns
SUCCESS (0), ABORT_CONTINUE (62), or ABORT_STOP (63). In a post-delete scenario, ABORT_STOP has the same
effect as ABORT_CONTINUE.
Scope: Global / Server.
post_delete_script
Specifies a hook script to run after deleting a backup, following the post_delete_retry_script.
Scope: Global / Server.
post_recovery_retry_script
Specifies a hook script to run after a recovery. Barman will retry this script until it returns SUCCESS
(0), ABORT_CONTINUE (62), or ABORT_STOP (63). In a post-recovery scenario, ABORT_STOP has the same effect
as ABORT_CONTINUE.
Scope: Global / Server.
post_recovery_script
Specifies a hook script to run after a recovery, following the post_recovery_retry_script.
Scope: Global / Server.
post_wal_delete_retry_script
Specifies a hook script to run after deleting a WAL file. Barman will retry this script until it returns
SUCCESS (0), ABORT_CONTINUE (62), or ABORT_STOP (63). In a post-WAL-delete scenario, ABORT_STOP has the
same effect as ABORT_CONTINUE.
Scope: Global / Server.
post_wal_delete_script
Specifies a hook script to run after deleting a WAL file, following the post_wal_delete_retry_script.
Scope: Global / Server.
pre_archive_retry_script
Specifies a hook script that runs before a WAL file is archived during maintenance, following the
pre_archive_script. As a retry hook script, Barman will repeatedly execute the script until it returns
either SUCCESS (0), ABORT_CONTINUE (62), or ABORT_STOP (63). Returning ABORT_STOP will escalate the
failure and halt the WAL archiving process.
Scope: Global / Server.
pre_archive_script
Specifies a hook script launched before a WAL file is archived by maintenance.
Scope: Global / Server.
pre_backup_retry_script
Specifies a hook script that runs before a base backup, following the pre_backup_script. As a retry hook
script, Barman will attempt to execute the script repeatedly until it returns SUCCESS (0), ABORT_CONTINUE
(62), or ABORT_STOP (63). Returning ABORT_STOP will escalate the failure and interrupt the backup
process.
Scope: Global / Server.
pre_backup_script
Specifies a hook script to run before starting a base backup.
Scope: Global / Server.
pre_delete_retry_script
Specifies a retry hook script to run before backup deletion, following the pre_delete_script. As a retry
hook script, Barman will attempt to execute the script repeatedly until it returns SUCCESS (0),
ABORT_CONTINUE (62), or ABORT_STOP (63). Returning ABORT_STOP will escalate the failure and interrupt the
backup deletion.
Scope: Global / Server.
pre_delete_script
Specifies a hook script run before deleting a backup.
Scope: Global / Server.
pre_recovery_retry_script
Specifies a retry hook script to run before recovery, following the pre_recovery_script. As a retry hook
script, Barman will attempt to execute the script repeatedly until it returns SUCCESS (0), ABORT_CONTINUE
(62), or ABORT_STOP (63). Returning ABORT_STOP will escalate the failure and interrupt the recover
process.
Scope: Global / Server.
pre_recovery_script
Specifies a hook script run before starting a recovery.
Scope: Global / Server.
pre_wal_delete_retry_script
Specifies a retry hook script for WAL file deletion, executed before pre_wal_delete_script. As a retry
hook script, Barman will attempt to execute the script repeatedly until it returns SUCCESS (0),
ABORT_CONTINUE (62), or ABORT_STOP (63). Returning ABORT_STOP will escalate the failure and interrupt the
WAL file deletion.
Scope: Global / Server.
pre_wal_delete_script
Specifies a hook script run before deleting a WAL file.
Scope: Global / Server.
Write-Ahead Logs (WAL)
These configuration options are related to how Barman will manage the Write-Ahead Logs (WALs) of the
PostreSQL servers.
compression
Specifies the standard compression algorithm for WAL files. Options include: lz4, xz, zstd, gzip,
pybzip2, pigz, bzip2, pybzip2 and custom.
NOTE:
All of these options require the module to be installed in the location where the compression will
occur.
The custom option is for custom compression, which requires you to set the following options as well:
• custom_compression_filter: a compression filter.
• custom_decompression_filter: a decompression filter
• custom_compression_magic: a hex string to identify a custom compressed wal file.
Scope: Global / Server / Model.
custom_compression_filter
Specifies a custom compression algorithm for WAL files. It must be a string that will be used internally
to create a bash command and it will prefix to the following string > "$2" < "$1";. Write to standard
output and do not delete input files.
TIP:
custom_compression_filter = "xz -c"
This is the same as running xz -c > "$2" < "$1";.
Scope: Global / Server / Model.
custom_compression_magic
Defines a custom magic value to identify the custom compression algorithm used in WAL files. If this is
set, Barman will avoid applying custom compression to WALs that have already been compressed with the
specified algorithm. If not configured, Barman will apply custom compression to all WAL files, even those
pre-compressed.
TIP:
For example, in the xz compression algorithm, the magic number is used to detect the format of .xz
files.
For xz files, the magic number is the following sequence of bytes:
Magic Number: FD 37 7A 58 5A 00
In hexadecimal representation, this can be expressed as:
Hex String: fd377a585a00
Reference: xz-file-format
Scope: Global / Server / Model.
custom_decompression_filter
Specifies a custom decompression algorithm for compressed WAL files. It must be a string that will be
used internally to create a bash command and it will prefix to the following string > "$2" < "$1";. It
must correspond with the compression algorithm used.
TIP:
custom_compression_filter = "xz -c -d"
This is the same as running xz -c -d > "$2" < "$1";.
Scope: Global / Server / Model.
incoming_wals_directory
Specifies the directory where incoming WAL files are archived. Requires archiver to be enabled. Defaults
to <backup_directory>/incoming.
Scope: Server.
last_wal_maximum_age
Defines the time frame within which the latest archived WAL file must fall. If the latest WAL file is
older than this period, the barman check command will report an error. If left empty (default), the age
of the WAL files is not checked. Format is the same as last_backup_maximum_age.
Scope: Global / Server / Model.
max_incoming_wals_queue
Defines the maximum number of WAL files allowed in the incoming queue (including both streaming and
archiving pools) before the barman check command returns an error. Default is None (disabled).
Scope: Global / Server / Model.
streaming_wals_directory
Directory for streaming WAL files. Defaults to <backup_directory>/streaming.
NOTE:
This option is applicable when streaming_archiver is activated.
Scope: Server.
wal_conninfo
The wal_conninfo connection string is used by Barman for monitoring the status of the replication slot
receiving WALs. If specified, it takes precedence over wal_streaming_conninfo for these checks. If
wal_conninfo is not set but wal_streaming_conninfo is, wal_conninfo will fall back to
wal_streaming_conninfo. If neither wal_conninfo nor wal_streaming_conninfo is set, wal_conninfo will fall
back to conninfo. Both connection strings must access a Postgres instance within the same cluster as
defined by streaming_conninfo and conninfo. If both wal_conninfo and wal_streaming_conninfo are set, only
wal_conninfo needs the appropriate permissions to read settings and check the replication slot status.
However, if only wal_streaming_conninfo is set, it must have the necessary permissions to perform these
tasks. The required permissions include roles such as pg_monitor, both pg_read_all_settings and
pg_read_all_stats, or superuser privileges.
Scope: Server / Model.
wal_streaming_conninfo
This connection string is used by Barman to connect to the Postgres server for receiving WAL segments via
streaming replication and checking the replication slot status, if wal_conninfo is not set. If not
specified, Barman defaults to using streaming_conninfo for these tasks. wal_streaming_conninfo must
connect to a Postgres instance within the same cluster as defined by streaming_conninfo, and it must
support streaming replication. If both wal_streaming_conninfo and wal_conninfo are set, only wal_conninfo
needs the required permissions to read settings and check the replication slot status. If only
wal_streaming_conninfo is specified, it must have these permissions. The necessary permissions include
roles such as pg_monitor, both pg_read_all_settings and pg_read_all_stats, or superuser privileges.
Scope: Server / Model.
wals_directory
Directory containing WAL files. Defaults to <backup_directory>/wals.
Scope: Server.
Restore
These configuration options are related to how Barman manages restoration backups.
local_staging_path
Specifies the local path for combining block-level incremental backups during recovery. This location
must have sufficient space to temporarily store the new synthetic backup. Required for recovery from a
block-level incremental backup.
NOTE:
Applies only when backup_method = postgres.
Scope: Global / Server / Model.
recovery_options
Options for recovery operations. Currently, only get-wal is supported. This option enables the creation
of a basic restore_command in the recovery configuration, which uses the barman get-wal command to
retrieve WAL files directly from Barman's WAL archive. This setting accepts a comma-separated list of
values and defaults to empty.
Scope: Global / Server / Model.
recovery_staging_path
Specifies the path on the recovery host for staging files from compressed backups. This location must
have sufficient space to temporarily store the compressed backup.
NOTE:
Applies only for commpressed backups.
Scope: Global / Server / Model.
Retention Policies
These configuration options are related to how Barman manages retention policies of the backups.
last_backup_maximum_age
Defines the time frame within which the latest backup must fall. If the latest backup is older than this
period, the barman check command will report an error. If left empty (default), the latest backup is
always considered valid. The accepted format is "n {DAYS|WEEKS|MONTHS}", where n is an integer greater
than zero.
Scope: Global / Server / Model.
last_backup_minimum_size
Specifies the minimum acceptable size for the latest successful backup. If the latest backup is smaller
than this size, the barman check command will report an error. If left empty (default), the latest backup
is always considered valid. The accepted format is "n {k|Ki|M|Mi|G|Gi|T|Ti}" and case-sensitive, where n
is an integer greater than zero, with an optional SI or IEC suffix. k stands for kilo with k = 1000,
while Ki stands for kilobytes Ki = 1024. The rest of the options have the same reasoning for greater
units of measure.
Scope: Global / Server / Model.
retention_policy
Defines how long backups and WAL files should be retained. If this option is left blank, no retention
policies will be applied. Options include redundancy and recovery window policies.
retention_policy = {REDUNDANCY value | RECOVERY WINDOW OF value {DAYS | WEEKS | MONTHS}}
• retention_policy = REDUNDANCY 2 will keep only 2 backups in the backup catalog automatically deleting
the older one as new backups are created. The number must be a positive integer.
• retention_policy = RECOVERY WINDOW OF 2 DAYS will only keep backups needed to recover to any point in
time in the last two days, automatically deleting backups that are older. The period number must be a
positive integer, and the following options can be applied to it: DAYS, WEEKS, MONTHS.
Scope: Global / Server / Model.
retention_policy_mode
Mode for enforcing retention policies. Currently only supports auto.
Scope: Global / Server / Model.
wal_retention_policy
Policy for retaining WAL files. Currently only main is available.
Scope: Global / Server / Model.
CONFIGURATION MODELS
Configuration models provide a systematic approach to manage and apply configuration overrides for
Postgres servers by organizing them under a specific cluster name.
Purpose
The primary goal of a configuration model is to simplify the management of configuration settings for
Postgres servers grouped by the same cluster. By using a model, you can apply a set of common
configuration overrides, enhancing operational efficiency. They are especially beneficial in clustered
environments, allowing you to create various configuration models that can be utilized during failover
events.
Application
The configurations defined in a model file can be applied to Postgres servers that share the same cluster
name specified in the model. Consequently, any server utilizing that model can inherit these settings,
promoting a consistent and adaptable configuration across all servers.
Usage
Model options can only be defined within a model section, which is identified in the same way as a server
section. It is important to ensure that there are no conflicts between the identifiers of server sections
and model sections.
To apply a configuration model, execute the barman config-switch SERVER_NAME MODEL_NAME. This command
facilitates the application of the model's overrides to the relevant Barman server associated with the
specified cluster name.
If you wish to remove the overrides, the deletion of the model configuration file alone will not have any
effect, so you can do so by using the --reset argument with the command, as follows: barman config-switch
SERVER_NAME --reset.
NOTE:
The config-switch command will only succeed if model name exists and is associated with the same
cluster as the server. Additionally, there can be only one active model at a time; if you execute the
command multiple times with different models, only the overrides defined in the last model will be
applied.
Not all options can be configured through models. Please review the scope of the available
configurations to determine which settings apply to models.
Benefits
• Consistency: Ensures uniform configuration across multiple Barman servers within a cluster.
• Efficiency: Simplifies configuration management by allowing centralized updates and overrides.
• Flexibility: Allows the use of multiple model files, providing the ability to define various sets of
overrides as necessary.
AUTHOR
EnterpriseDB
COPYRIGHT
© Copyright EnterpriseDB UK Limited 2011-2024
3.12 Dec 09, 2024 BARMAN(5)