NAME

       ganesha-log-config - NFS Ganesha Log Configuration File

SYNOPSIS

       /etc/ganesha/ganesha.conf

DESCRIPTION

       NFS-Ganesha reads the configuration data from: | /etc/ganesha/ganesha.conf

       This file lists NFS-Ganesha Log config options.

       These options may be dynamically updated by issuing a SIGHUP to the ganesha.nfsd process.

   LOG {}
       Default_log_level(token,default EVENT)
          If  this  option  is  NOT  set, the fall back log level will be that specified in the -N option on the
          command line if that is set, otherwise the fallback level is EVENT.
              If a SIGHUP is issued, any components not specified in LOG { COMPONENTS {} } will be reset to this
              value.

       The log levels are:

       NULL, FATAL, MAJ, CRIT, WARN, EVENT, INFO, DEBUG, MID_DEBUG, M_DBG, FULL_DEBUG, F_DBG

       RPC_Debug_Flags(uint32, range 0 to UINT32_MAX, default 7)
              Debug flags for TIRPC (default 7 matches log level default EVENT).

              These flags are only used if the TIRPC component is set to DEBUG

       Display_UTC_Timestamp(bool, default false)
              Flag to enable displaying UTC date/time in log messages instead of localtime.

   LOG { COMPONENTS {} }
       Default_log_level(token,default EVENT)

              These entries are of the form:
                     COMPONENT = LEVEL;

              The components are:
                     ALL, LOG, MEMLEAKS, FSAL, NFSPROTO,  NFS_V4,  EXPORT,  FILEHANDLE,  DISPATCH,  CACHE_INODE,
                     CACHE_INODE_LRU,  HASHTABLE,  HASHTABLE_CACHE,  DUPREQ,  INIT, MAIN, IDMAPPER, NFS_READDIR,
                     NFS_V4_LOCK, CONFIG, CLIENTID, SESSIONS, PNFS, RW_LOCK, NLM, RPC,  TIRPC,  NFS_CB,  THREAD,
                     NFS_V4_ACL, STATE, 9P, 9P_DISPATCH, FSAL_UP, DBUS, NFS_MSK

              Some synonyms are:
                     FH  =  FILEHANDLE  HT  =  HASHTABLE  INODE_LRU = CACHE_INODE_LRU INODE = CACHE_INODE DISP =
                     DISPATCH LEAKS = MEMLEAKS  NFS3  =  NFSPROTO  NFS4  =  NFS_V4  HT_CACHE  =  HASHTABLE_CACHE
                     NFS_STARTUP = INIT NFS4_LOCK = NFS_V4_LOCK NFS4_ACL = NFS_V4_ACL 9P_DISP = 9P_DISPATCH

              The log levels are:
                     NULL, FATAL, MAJ, CRIT, WARN, EVENT, INFO, DEBUG, MID_DEBUG, M_DBG, FULL_DEBUG, F_DBG

                     default none

              ALL  is  a special component that when set, sets all components to the specified value, overriding
              any that are explicitly set. Note that if ALL is then  removed  from  the  config  and  SIGHUP  is
              issued,  all  components  will  revert  to what is explicitly set, or Default_Log_Level if that is
              specified, or the original log level from the -N command line option if that was set, or the  code
              default of EVENT.

              TIRPC is a special component that also sets the active RPC_Debug_Flags.  If the level for TIRPC is
              DEBUG or MID_DEBUG, the custom RPC_Debug_Flags set by that parameter will be used, otherwise flags
              will depend on the level the TIRPC component is set to:
                 NULL or FATAL: 0

                 CRIT or MAJ: TIRPC_DEBUG_FLAG_ERROR

                 WARN: TIRPC_DEBUG_FLAG_ERROR | TIRPC_DEBUG_FLAG_WARN

                 EVENT or INFO: TIRPC_DEBUG_FLAG_ERROR | TIRPC_DEBUG_FLAG_WARN | TIRPC_DEBUG_FLAG_EVENT

                 DEBUG or MID_DEBUG: RPC_Debug_Flags

                 FULL_DEBUG: 0xffffffff

   LOG { FACILITY {} }
       name(string, no default)

       destination(string, no default, must be supplied)

       max_level(token,default FULL_DEBUG)
              The log levels are:
                 NULL, FATAL, MAJ, CRIT, WARN, EVENT, INFO, DEBUG, MID_DEBUG, M_DBG, FULL_DEBUG, F_DBG

       headers(token, values [none, component, all], default all)

       enable(token, values [idle, active, default], default idle)

   LOG { FORMAT {} }
       date_format(enum,default ganesha)

              Possible values:
                     ganesha,  true,  local,  8601,  ISO-8601,  ISO 8601, ISO, syslog, syslog_usec, false, none,
                     user_defined

       time_format(enum,default ganesha)

              Possible values:
                     ganesha, true, local, 8601, ISO-8601, ISO 8601,  ISO,  syslog,  syslog_usec,  false,  none,
                     user_defined

       user_date_format(string, no default)

       user_time_format(string, no default)

       EPOCH(bool, default true)

       CLIENTIP(bool, default false)

       HOSTNAME(bool, default true)

       PROGNAME(bool, default true)

       PID(bool, default true)

       THREAD_NAME(bool, default true)

       FILE_NAME(bool, default true)

       LINE_NUM(bool, default true)

       FUNCTION_NAME(bool, default true)

       COMPONENT(bool, default true)

       LEVEL(bool, default true)

SEE ALSO

       ganesha-config(8)

                                                  Apr 15, 2024                             GANESHA-LOG-CONFIG(8)