Provided by: libmarpa-r2-perl_2.086000~dfsg-9_amd64 
Name
Marpa::R2::Scanless::DSL - The DSL for the Scanless interface
Synopsis
use Marpa::R2;
my $grammar = Marpa::R2::Scanless::G->new(
{ bless_package => 'My_Nodes',
source => \(<<'END_OF_SOURCE'),
:default ::= action => [values] bless => ::lhs
lexeme default = action => [ start, length, value ]
bless => ::name latm => 1
:start ::= Script
Script ::= Expression+ separator => comma
comma ~ [,]
Expression ::=
Number bless => primary
| '(' Expression ')' bless => paren assoc => group
|| Expression '**' Expression bless => exponentiate assoc => right
|| Expression '*' Expression bless => multiply
| Expression '/' Expression bless => divide
|| Expression '+' Expression bless => add
| Expression '-' Expression bless => subtract
Number ~ [\d]+
:discard ~ whitespace
whitespace ~ [\s]+
# allow comments
:discard ~ <hash comment>
<hash comment> ~ <terminated hash comment> | <unterminated
final hash comment>
<terminated hash comment> ~ '#' <hash comment body> <vertical space char>
<unterminated final hash comment> ~ '#' <hash comment body>
<hash comment body> ~ <hash comment char>*
<vertical space char> ~ [\x{A}\x{B}\x{C}\x{D}\x{2028}\x{2029}]
<hash comment char> ~ [^\x{A}\x{B}\x{C}\x{D}\x{2028}\x{2029}]
END_OF_SOURCE
}
);
About this document
This is the reference document for the domain-specific language (DSL) of Marpa's Scanless interface
(SLIF). The SLIF's DSL is an extension of BNF. The SLIF DSL is used to specify other DSL's, and is
therefore a "meta-DSL".
The structure of SLIF source strings
The SLIF source string consists of a series of rules, pseudo-rules and statements. These are made up of
tokens, as described below. Whitespace separates tokens, but is otherwise ignored.
A hash (""#"") character starts a comment, which continues to the end of the line. Comments are
equivalent to whitespace.
L0, G1 and lexemes
In reading this document, it is important to keep in mind the distinction, on one hand, between L0 and G1
rules and, on the other hand, between rules and lexemes. G1 rules have a semantics, which can be
specified as described in this document. L0 rules simply recognize symbols in the input. L0 rules do
not have a semantics.
Top-level L0 rules correspond to a string in the input. The top-level L0 rules are seen by G1 as
lexemes, and the string to which a top-level L0 rule corresponds becomes the default value of the lexeme.
The L0 grammar can be thought of as similar in behavior to a set of regular expressions with the lexemes
being seen as similar to named captures.
Lexemes are the symbols which form the interface between G1 and L0. Lexemes, like G1 rules, have a
semantics. The semantics of lexemes is specified separately from the semantics of G1 rules, as described
below.
Symbol names
Symbol names can be either "bare" or enclosed in angle brackets. Bare symbol names must consist entirely
of Perl word characters (alphanumerics, plus the underscore). Symbol names are case-sensitive.
The angle brackets, if used, serve to "quote" the symbol name, and will not be part of the explicit
symbol name.
If angle brackets are used, symbol names may also contain whitespace, as in
<op comma>
A whitespace sequence inside angle brackets can include any whitespace character that is legal in Perl,
including newlines. This allows very long symbol names to be line wrapped, if necessary.
Unlike the angle brackets, the whitespace in a bracketed symbol token does become part of the explicit
symbol name, but it does so in a "normalized" form. Leading and trailing whitespace in the name is
discarded, and all other whitespace sequences are converted to a single ASCII space character. This
means that
< op comma >
<op comma>
< op comma>
and even
<op
comma>
will all be regarded as the same symbol name. The explicit form of that symbol name is "<op comma>",
except that, again, the angle brackets are for clarity, and are not part of the explicit name.
Explicit, reserved and internal symbol names are often displayed between angle brackets, regardless of
whether the symbol was originally specified in bracketed form.
When a SLIF symbol needs to be referred to by name in Perl code, it is the symbol's explicit name that is
used.
Single-quoted strings
Expression ::=
Number bless => primary
| '(' Expression ')' bless => paren assoc => group
|| Expression '**' Expression bless => exponentiate assoc => right
|| Expression '*' Expression bless => multiply
| Expression '/' Expression bless => divide
|| Expression '+' Expression bless => add
| Expression '-' Expression bless => subtract
Child ~ 'cHILd':i
Single quotes can be used in prioritized rules to indicate character strings. The characters inside the
single quote will be matched in the input, literally and one-for-one. Single-quoted strings can contain
any characters with the exception of single quotes and vertical whitespace.
Single-quoted strings do not allow "escaped" characters. A backslash (""\"") represents itself and has
no effect on the interpretation of the next character. If a rule needs to match one of the forbidden
characters (single quote or vertical whitespace), it must use a character class.
Single-quoted strings are always interpreted at the L0 level, but they may be used in either structural
or lexical rules. When a single quoted string is used in a structural rule, Marpa creates a virtual L0
rule on behalf of the application. This is handy, but it does have a real disadvantage -- the name of
the virtual rule's LHS will be one assigned automatically by Marpa. When tracing and debugging parses
and grammars, these virtual LHS's can be harder for a programmer to interpret.
A modifier can appear after the string. It must appear immediately after the string, with no intervening
whitespace. Currently only the "":ic"" and "":i"" modifier are availables. These have exactly the same
effect -- they make the string match case-insensitive.
Character classes
<vertical space char> ~ [\x{A}\x{B}\x{C}\x{D}\x{2028}\x{2029}]
word ~ [\w]:ic +
A character class in square brackets (""[]"") can be used in a RHS alternative of a prioritized rule, a
quantified rule or a discard pseudo-rule. Marpa character classes may contain anything acceptable to
Perl, and follow the same escaping conventions as Perl's character classes.
Character classes are always interpreted at the L0 level, but they may be used in either structural or
lexical rules. When a character class is used in a structural rule, Marpa creates a virtual L0 rule on
behalf of the application. This is handy, but it does have a real disadvantage -- the name of the
virtual rule's LHS will be one assigned automatically by Marpa. When tracing and debugging parses and
grammars, these virtual LHS's can be harder for a programmer to interpret.
An implementation note: character classes are interpreted by Perl, but this involves minimal overhead
when the parse is of any length. Each character class is passed to Perl to interpret exactly once and
the result is memoized in a C language structure for future use.
The modifiers allowed after single quoted strings are also allowed allowed after character classes.
Modifiers must appear immediately after the closing square bracket, with no intervening whitespace. For
more details, see the section on single-quoted strings.
Statements
The SLIF DSL consists of a series of statements. The statements are of three kinds, as indicated by
their declarator:
• G1 rules
The BNF operator (""::=""), coming between the LHS and the first RHS alternative of a rule, indicates
that the rule is a G1 rule.
• L0 rules
The match operator (""~""), coming between the LHS and the first RHS alternative of a rule, indicates
a L0 rule.
• Global statements
Global statements are signified by the assignment operator (""=""). The location of a statement in
the DSL source will never affect the result.
Rules differ from statements in that the effect of a rule is sometimes lexical -- that is, the effect may
vary depending on the position of the rule in the DSL source. Some rules are called pseudo-rules.
Pseudo-rules do not correspond to BNF rules, but instead use the rule format as a convenient way to
express other information.
The structure of rules
Every rule declaration consists of, in order:
• A left hand side (LHS). This will be a symbol or a pseudo-symbol.
• A declaration operator (""::="" or ""~"").
• A right side declaration, which contains one or more RHS alternatives. Details of the right side
declaration vary by the type of rule. For each type of rule, the right side declaration is described
in detail below.
RHS alternatives
The right side declaration of a rule will often contain one or more RHS alternatives. A RHS alternative
is a series of RHS primaries, where a RHS primary may be a symbol name, a character class, or a single
quoted string. A list of one or more adverbs is often associated with the RHS alternatives. Each adverb
consists of a keyword, the adverb operator (""=>""), and the adverb's value.
Within an alternative, primaries may be enclosed in parentheses. A primary enclosed in parentheses is
hidden from Marpa's semantics. A set of parentheses may contain more than one primary, in which case the
entire sequence of primaries is hidden, as if they had been enclosed in parentheses individually.
"Hiding" primaries in this way can be convenient for primaries whose values the semantics will ignore,
perhaps because the value is constant.
For example, in the following rule
a ::= b (',' c) d action => ::first
there is
• A LHS, in this case the symbol ""a"".
• A declarator, ""::="", which indicates this is a G1 rule.
• A RHS alternative consisting of four RHS primaries. The first RHS primary is the symbol ""b"". The
second RHS primary is a short single-quoted string ','. The third and fourth RHS primaries are
symbols: ""c"" and ""d"". The parentheses around the second and third RHS primaries "hide" them from
the semantics. Marpa's semantics will see this as a rule with only two RHS values.
• The adverb list associated with the RHS alternative, consisting of a single adverb. The adverb
consists of its keyword ""action"", followed by the adverb operator (""=>""), and the adverb's value
""::first"".
The rule in the above example is one of a very common type: a trivial prioritized rule. A prioritized
rule is one that contains one or more prioritized RHS alternatives. Prioritized rules are the only rules
which may contain more than one RHS alternative, but even prioritized rules usually have only one RHS
alternative. If there is only one RHS alternative, as in this case, the prioritization is trivial --
there is only one priority.
Start rule
:start ::= Script
By default, the start symbol of the grammar is the LHS of the first G1 rule. This default can be make
explicit or overriden by using an explicit start rule. The LHS of this rule is the ":start" pseudo-
symbol. Only one RHS alternative is allowed. This RHS alternative must contain only one symbol name,
and that symbol will be the start symbol of the G1 grammar. No adverbs should be associated with the RHS
alternative. Start rules must be G1 rules.
Empty rules
An empty rule is a rule with an empty RHS. The empty RHS, technically, is a RHS alternative, one with
zero RHS primaries. The "action" and "bless" adverbs are allowed for the empty RHS alternative, but no
others. A empty rule makes its LHS symbol a nullable symbol.
Quantified rules
Script ::= Expression+ separator => comma
A quantified rule has only one RHS alternative, which is followed by a quantifier. The RHS alternative
must consist of a single RHS primary. This RHS primary must be a symbol name or a character class. The
quantifer is either a star (""*""), or a plus sign (""+"") indicating, respectively, that the sequence
rule has a minimum length of 0 or 1.
Adverbs may be associated with the RHS alternative. The adverb list must follow the quantifier. The
adverbs allowed are "action", "bless", "proper" and "separator".
Prioritized rules
Expression ::=
Number bless => primary
| '(' Expression ')' bless => paren assoc => group
|| Expression '**' Expression bless => exponentiate assoc => right
|| Expression '*' Expression bless => multiply
| Expression '/' Expression bless => divide
|| Expression '+' Expression bless => add
| Expression '-' Expression bless => subtract
A prioritized rule contains a series of one or more RHS alternatives, separated by either the alternation
operator (""|"") or the loosen operators (""||""). In a typical grammar, most rules are prioritized
rules, but they are often trivially prioritized, consisting of only one RHS alternative. For brevity,
RHS alternatives are often called alternatives.
Each alternative may be followed by a list of associated adverbs. The "action", "assoc" and "bless"
adverbs are allowed.
The RHS alternatives in a prioritized right hand side proceed from tightest (highest) priority to
loosest. The double "or" symbol (""||"") is the "loosen" operator -- the alternatives after it have a
looser (lower) priority than the alternatives before it. The single "or" symbol (""|"") is the ordinary
"alternative" operator -- alternatives on each side of it have the same priority. Associativity is
specified using adverbs, as described below.
Discard pseudo-rules
:discard ~ whitespace
A discard pseudo-rule is a rule whose LHS is the ":discard" pseudo-symbol, and which has only one RHS
alternative. The RHS alternative must contain exactly one symbol name, called the discarded symbol.
Discard pseudo-rules indicate that the discarded symbol is a top-level L0 symbol, but one which is not a
lexeme. When a discarded symbol is recognized, it is not passed as a lexeme to the G1 parser, but is (as
the name suggests) discarded. Discard pseudo-rules must be L0 rules. No adverbs are allowed.
Default pseudo-rules
:default ::= action => [values] bless => ::lhs
:default ::= action => [lhs, values ]
The purpose of the default pseudo-rule is to change the defaults for rule adverbs. Technically, it has
one RHS alternative, but this must always contain zero RHS primaries. Default pseudo-rules do not affect
the defaults for L0 rules or for lexemes. There may be more than one default pseudo-rule. The scope of
default pseudo-rules is lexical, applying only to rules that appear afterwards in the DSL source.
Currently only the "action" and "bless" adverbs can be specified in a default pseudo-rule. Each default
pseudo-rule creates a completely new set of defaults -- if an adverb is not specified, the default is
reset to its implicit value, the value which it had prior to any explicit settings.
Lexeme pseudo-rules
:lexeme ~ <say keyword> priority => 1
The purpose of the ":lexeme" pseudo-rule is to allow adverbs to change the treatment of a lexeme. This
pseudo-rule always has exactly one RHS alternative, and that RHS alternative must contain exactly one
symbol. This RHS symbol identifies the lexeme which the adverbs will affect. The only adverbs allowed
in a ":lexeme" rule are "event", "pause", and "priority".
As a side effect, a ":lexeme" pseudo-rule declares that its RHS symbol is expected to be a lexeme. This
declaration does not "force" lexeme status -- if the symbol does not meet the criteria for a lexeme based
on its use in L0 and G1 rules, the result will be a fatal error. Applications may find this ability to
"declare" lexemes useful for debugging, and for documenting grammars.
Lexeme default statement
lexeme default = action => [ start, length, value ]
bless => ::name latm =>
lexeme default = action => [ lhs, value ]
The lexeme default statement changes the defaults for lexeme adverbs. It only changes the defaults for
lexemes, and does not affect rules. Only the defaults for the "action", "bless", and "latm" adverbs can
be specified in a lexeme default statement. Only one lexeme default statement is allowed in a grammar.
Named event statement
event subtext = completed <subtext>
event 'A[]' = nulled <A>
event '^a' = predicted A
The named event statement sets up a symbol so that a named event is triggered when some condition occurs
at a location. Named events can be defined to occur when a symbol is predicted, when a symbol is
completed, or when a symbol is nulled.
A "completed" event occurs whenever a rule with that symbol on its LHS is fully recognized in the parse.
(The idea is that "symbol completion" occurs when the rule, and therefore its LHS, is "complete".) For
the purpose of "completed" events, a nulled symbol is not considered "complete", and "completed" events
will not be triggered for a zero-length instance of a symbol.
A "nulled" event occurs whenever a zero-length symbol instance is recognized. Null symbols may derive
other null symbols, and these derivations may be ambiguous. Ambiguous or not, all such derivations cause
"nulled" events. Again, nulled events and completed events are mutually exclusive -- a nulled, or zero-
length, symbol is not considered "complete" for this purpose.
A "predicted" event occurs at any location where a non-zero length symbol would be accepted by the
recognizer. It can be thought of as occurring when a symbol is "expected". The expectation may or may
not come true, depending on future input. Because there is no physical distinction between expecting a
zero-length symbol, and actually seeing one, "predicted" events are not generated for symbols which are
only expected in zero-length form.
Completed and nulled events may not be defined for symbols that are lexemes, but lexemes are allowed to
be predicted events. A predicted event which is a lexeme is different from a lexeme pause. The lexeme
pause will not occur unless that the lexeme is actually found in the input. A predicted event, on the
other hand, is as the name suggests, only a prediction. The predicted symbol may or not actually be
found in the input.
The name of an event may be either a bare name, or enclosed in single quotes. A bare event name must be
one or more word characters, starting with an alphabetic character. A single quoted event name may
contain any character except a single quote or vertical space. The whitespace in single quoted event
names is normalized in similar fashion to the normalization of symbol names -- leading and trailing
whitespace is removed, and all sequences of internal whitespace are changed to a single ASCII space
character. Names containing single quotes (which, in any case, are impossible to add using current
syntax) are reserved.
Named completion events can occur during the the Scanless recognizer's read(), resume(),
lexeme_complete(), and lexeme_read() methods. When they occur in the Scanless recognizer's read(), and
resume() methods, they pause internal scanning. Named events may be queried using the Scanless
recognizer's event() method.
Inaccessible symbol statement
inaccessible is ok by default
inaccessible is fatal by default
Inaccessible symbols are symbols which cannot be reached from the start symbol. Often, they are the
result of an error in grammar writing. But inaccessible symbols can also occur for legitimate reasons --
for example, you may have rules and symbols in grammar intended for future use.
The default can be specified or changed with a statement of the form:
inaccessible is TREATMENT by default
where "TREATMENT" is one of "warn", "ok", or "fatal".
"fatal" indicates that an inaccessible symbol should be a fatal error. "warn" indicates that Marpa
should print a warning message, but proceed with the parse. "warn" is the default. "ok" indicates that
the parse should proceed without warning messages.
Ambiguity
Marpa parses ambiguous grammars and the design of the SLIF exploits this. A flexible, but potentially
ambiguous, syntax is used. Actual ambiguities are obvious to the human eye, and users will create them,
so that the techniques of this section will rarely be needed.
If and when an actual ambiguity does occur, an error message reports the ambiguity and its exact
location. It will always be possible to disambiguate a SLIF DSL, and there will always be more than one
way to do this.
Separating statements with semicolons
:default ::= action => ::array
quartet ::= a a a a;
inaccessible is warn by default
a ~ 'a'
A statement may be terminated with a semicolon ("";"").
Grouping statements in curly braces
{
:default ::= action => ::array
quartet ::= a a a a
}
inaccessible is warn by default
a ~ 'a'
Statements can be grouped, using curly braces. These do not create scopes -- the curly braces serve
merely to group and to separate groups of statements.
Other ways to disambiguate
There are many other ways to disambiguate SLIF statements. If the ambiguity is between keywords and
symbol names, enclosing a symbol name in angle brackets will force it to be treated only as a symbol
name. And while it is never necessary, statements can be re-ordered.
Adverbs
Adverbs consist of a keyword, the adverb operator (""=>""), and the adverb's value. The keyword must be
one of those described in this section. The adverb's value must be as described for each keyword.
action
The "action" adverb is allowed for
• An RHS alternative, in which the action is for the alternative.
• The default pseudo-rule, in which case the action is for all rules which do not have their own action
explicitly specified.
• The lexeme default statement, in which case the action is for all lexemes.
The "action" adverb is not allowed for L0 rules. The possible values of actions are described, along
with other details of the semantics, in a separate document.
assoc
The "assoc" adverb is only valid in a prioritized rule. Its value must be one of "left", "right" or
"group". Its effect will be as described below.
bless
The "bless" adverb causes the result of the semantics to be blessed into the class indicated by the value
of the adverb. Details of its use may be found in the semantics document.
event
:lexeme ~ <a> pause => before event => 'before a'
:lexeme ~ <b> pause => after event => 'after b'
:lexeme ~ <c> pause => before event => 'before c'
:lexeme ~ <d> pause => after event => 'after d'
The "event" adverb applies only to lexemes and is only allowed in a ":lexeme" pseudo-rule. It turns a
lexeme's pause into a named event, using the name specified as its value. Applications are encouraged to
turn all lexeme pause's into named events, using the "event" adverb. The allowed event names are as
described for the named event statement.
It is a fatal error to specify the "event" adverb if the "pause" adverb is not also specified.
forgiving
:lexeme ~ <name> forgiving => 1
The forgiving adverb is a synonym for the "latm" adverb.
latm
:lexeme ~ value latm => 1
The "latm" adverb applies only to lexemes and is only allowed in a ":lexeme" pseudo-rule and a "lexeme
default" statement. Its value is a boolean. If the boolean is set it indicates that a token is LATM. A
value of 1 is recommended, which indicates that a token is LATM. The default value is 0, for reasons of
backward compatibility.
LATM means "longest acceptable tokens match". In this, the lexer find those tokens that are the longest
that would be accepted by the G1 grammar. There may be more than one such "longest" acceptable token, in
which case, the lexing will be ambiguous, and the parse will use all of the matching tokens.
The alternative to LATM, and the default, is the "longest tokens match" (LTM) discipline. LTM is similar
to LATM, except that it takes no account of whether a token would be acceptable to the G1 grammar. This
makes it possible that LTM will find one or more lexemes that are a longest match, and none of them will
be acceptable to G1. When that happens, the parse fails with an error message. This failure occurs even
if shorter lexemes would have been found using LATM, lexemes which would have been acceptable to the G1
grammar. This means that matching succeeds more often under LATM than under LTM.
Intuitively, LATM is a longest tokens match that considers context, while LTM is a longest tokens match
that ignores context. LATM is usually preferable. Usually if LATM is chosen, a parse will want to use
the a "lexeme default" statement and use LATM globally. It is possible to use LATM adverb on a lexeme by
lexeme basis. When that is done, the lexemes marked LATM will match only if acceptable to the G1
grammar, and the lexemes not marked LATM will match regardless of their acceptability to the G1 grammar.
Whichever token discipline is chosen, all tokens matched will be of the same length. Shorter tokens will
not be considered.
LTM is the default for historical reasons. LTM was the SLIF's original token matching discipline because
it more closely models traditional lexing. Also for historical reasons, LATM lexemes are sometimes
called "forgiving" -- in the original implementation, an LTM search was always done for all lexemes, and
LATM was implemented by "forgiving" rejection by the G1 grammar, and backing up over the input to find
acceptable lexemes. Marpa now does LATM far more efficiently -- the G1 grammar indicates to the lexer,
in advance, which lexemes are acceptable, and the lexer searches only for those.
name
start ::= number1 number2 name => top
number1 ::= <forty two> name => 'number 1'
number2 ::= <forty three> name => 'number 2'
The "name" adverb applies only to rules and rule alternatives. When specified, it defines a name for
that rule alternative.
null-ranking
S ::= A A A A null-ranking => high
The "null-ranking" adverb applies only to G1 rules (L0 rules do not have a semantics) and is ignored
unless the SLIF recognizer's "ranking_method" named argument is set to something other than its default.
Some rule alternatives can match the same input in several ways, depending on which symbols are nulled.
These different ways of nulling symbols in a rule are called its null variants. The "null-ranking" named
argument allows the application to control the order in which null variants are returned by the value()
method.
If "null-ranking" is undefined, the order of the null variants will be arbitrary. This is the default,
and is acceptable to most applications. For details on using the "null-ranking" adverb, see the document
on parse order.
pause
:lexeme ~ <a> pause => before event => 'before a'
:lexeme ~ <b> pause => after event => 'after b'
:lexeme ~ <c> pause => before event => 'before c'
:lexeme ~ <d> pause => after event => 'after d'
The "pause" adverb applies only to lexemes and is only allowed in a ":lexeme" pseudo-rule. Pauses take
effect during the Scanless recognizer's read() and resume() methods. They cause internal scanning to be
suspended, or "paused", before or after the specified lexeme. Internal scanning can be resumed with the
Scanless recognizer's resume() method.
Applications are encouraged to name every lexeme pause using the event adverb. If this is done, lexeme
pauses can be queried using the SLIF recognizer's events() method. Unnamed lexeme pauses must be queried
using the SLIF recognizer's pause_lexeme() method.
If the value of pause is "before", Marpa will "pause" internal scanning before that lexeme. No lexemes
will be read at that position.
If the value of pause is "after", all applicable lexemes at that position will be read by G1, and
internal scanning will pause immediately afterwards.
A lexeme pause event does not occur, and has no effect, if
• It is deactivated. Deactivation and reactivation of events is done with the SLIF recognizer's
activate() method
• The G1 grammar would reject that lexeme at that location.
• It has a lexeme priority lower than the highest lexeme priority.
• At the same priority, it has a pause value of "after", when another lexeme pause occurs which has a
pause value of "before". In other words, pausing before a lexeme prevents Marpa from pausing after
another lexeme at the same location.
Even with the above restrictions, there can be more than one lexeme pause event at a location. The
pause_lexeme() method will return only one of them, chosen arbitrarily, whereas the events() method will
return all of the named events. This is one of the reasons that applications are strongly encouraged to
specify a name for every lexeme pause event using the "event" adverb.
priority
The "priority" adverb is only allowed in a ":lexeme" pseudo-rule. It sets the lexeme priority for the
lexeme. The priority must be an integer, but it may be negative. An increase in numerical value means a
higher priority. For example, a priority of 1 is greater than a priority of 0. A priority of 0, in
turn, is greater than a priority of -1. The default priority is zero.
Where more than one lexeme can be accepted at a location, the lexeme priority limits the lexemes that
will be considered. Only lexemes with the highest priority are considered. If several lexemes have the
same priority, all of them will be accepted.
The only effect of the lexeme priority is on the choice of lexemes when
• all of them would be accepted;
• all started at the same string location;
• all end at the same string location; and therefore
• all have the same length.
Lexeme priorities only have an effect when lexemes are accepted. The intent of this scheme is to avoid
situations where a lexeme with a high priority is rejected, and causes a parse to fail, even though
another lower priority lexeme is acceptable and would allow the parse to continue.
For example, suppose that ""say"" can be both a keyword ("<say keyword>"), and a variable name
("<variable>"). Suppose further that the grammar specifies that "<say keyword>" has a priority of 1, and
"<variable>" is left at the default priority of 0. When L0 finds a occurrence of ""say"", where both the
"say" keyword and a variable name would be accepted by G1, then only the "say" keyword is read by G1,
because of the priorities.
But, suppose instead that the parse is at a location where G1 is not accepting the "<say keyword>".
Since only lexeme priorites of acceptable lexemes are considered, "<variable>" lexeme has the highest
priority, and the literal string ""say"" will be read as a "<variable>" token.
proper
The "proper" keyword is only valid for a quantified right side, and its value must be a boolean, in the
form of a binary digit (0 or 1). It is only relevant is a separator is defined and is 1 if proper
separation is required, and 0 if Perl separation is allowed. "Perl separation" allows a final separator.
"Proper separation" is so called, because it requires that separators be "proper" in the sense that they
must actually separate sequence items.
rank
unspecial ::= ('I' 'am' 'special') words ('--' 'NOT!' ';') rank => 1
special ::= words (';') rank => -1
"rank" is ignored unless the recognizer's "ranking_method" named argument is set to something other than
its default. The range allowed for "rank" is implementation-defined, but numbers in the range between
-134,217,727 and 134,217,727 will always be allowed. "rank" is 0 by default. For details on using the
"rank" named argument, see the document on parse order.
separator
The "separator" keyword is only valid for a quantified right side, and its value must be a single symbol
-- either a single symbol name, or a character class. If specified, the separator must separate items of
the sequence. A separator may not be nullable.
Precedence
Marpa's precedence is a generalization beyond the traditional ideas of precedence. Traditional
precedence parsing required the classification of operators as postfix, infix, etc. Marpa's precedence
parsing is NOT based on the special treatment of operators.
For the purpose of precedence, an operand is an occurrence in a RHS alternative of the LHS symbol. An
operator is considered to be anything that is not an operand. The arity of an alternative is the number
of operands that it contains. All arities are allowed, from zero to the arbitrary number imposed by
system limits such as memory and file size.
For example, in the synopsis, the LHS symbol is "Expression". The alternative
(<op lparen>) Expression (<op rparen>)
contains one occurrence of "Expression" and therefore has an arity of one. The "<op lparen>" and "<op
rparen>" are considered operators.
In the RHS alternative
Expression (<op pow>) Expression
"Expression" occurs twice, and therefore the arity is 2. "<op pow>" is considered to be an operator.
Because for this purpose an operator is defined as anything that is not an operand, Marpa treats some
symbols as operators that would not be considered operators in the traditional approach. For example, in
the RHS alternative
Number
there are no occurrences of "Expression", so that the alternative has an arity of zero -- it is nullary.
The symbol "Number" is considered to be an operator.
An alternative with arity 0 is nullary. Precedence and associativity are meaningless in this case and
will be ignored.
An alternative with arity 1 is unary. Precedence will have effect, but left and right associativity will
not.
An alternative with arity 2 is binary. Precedence will have effect, and left and right associativity
will behave in the traditional way. The traditional behavior for binary alternatives is exactly as
described next for the N-ary case.
An alternative with an arity of N, where N is 2 or greater, is N-ary. Precedence will have effect. For
left associativity, only the leftmost operand of an N-ary alternative associates -- operands after the
first will have the next-tightest priority level. For right associativity, only the rightmost operand of
an N-ary alternative associates -- all operands except the last will have the next-tightest priority
level.
Marpa also allows "group" associativity. In "group" associativity, all operands associate at the loosest
(lowest) priority. That is, in an alternative with group associativity, each operand may be a full
expression of the kind defined by the prioritized rule. "Group" associativity is used, for example, in
implementing the traditional function of parentheses in Marpa. Group associativity is meaningless for
nullary alternatives, and is ignored.
Precedence and ambiguous grammars
Marpa's generalization of precedence works for all grammars that can be defined by prioritized rules. It
is efficient (linear) for all grammars that could be parsed by the traditional precedence parsing
methods. Marpa also allows you to define alternatives not allowed by traditional methods. Many of these
are useful, and most of the useful ones can be parsed efficiently.
Because of the many forms of recursion allowed, it is possible to define highly ambiguous grammars using
the precedence mechanism. This can occur even by accident.
The user should especially be careful with right hand side alternatives in which all the symbols are
operands. These can be useful. For example, an implicit operation can be defined using a binary
alternative with no non-operands, and this could implement, for example, the standard notation for
concatenation or multiplication. But to do this efficiently requires either avoiding ambiguity, or
controlling its use carefully.
Marpa does catch the case where an alternative consists only of a single operand -- a "unit rule". This
causes a fatal error. Unit rules are easy to define by accident in the SLIF. The author knows of no
practical use for them, and their presence in a grammar is usually unintentional. Note that, in the
event an application does find a use for a grammar with unit rules, the NAIF and the Thin interface can
parse it.
Copyright and License
Copyright 2014 Jeffrey Kegler
This file is part of Marpa::R2. Marpa::R2 is free software: you can
redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation,
either version 3 of the License, or (at your option) any later version.
Marpa::R2 is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser
General Public License along with Marpa::R2. If not, see
http://www.gnu.org/licenses/.
perl v5.38.2 2024-03-06 Marpa::R2::Scanless::DSL(3pm)