Provided by: maildir-utils_1.12.6-1build1_amd64 
NAME
mu-find - find e-mail messages in the mu database.
SYNOPSIS
mu [COMMON-OPTIONS] find [OPTIONS] SEARCH_EXPRESSION
DESCRIPTION
mu find is the mu command for searching e-mail message that were stored earlier using mu index(1).
SEARCHING MAIL
mu find starts a search for messages in the database that match some search pattern. The search patterns
are described in detail in mu-query(7).
For example:
$ mu find subject:snow and date:2009..
would find all messages in 2009 with `snow' in the subject field, e.g:
2009-03-05 17:57:33 EET Lucia <lucia@example.com> running in the snow
2009-03-05 18:38:24 EET Marius <marius@foobar.com> Re: running in the snow
Note, this the default, plain-text output, which is the default, so you don't have to use --format=plain.
For other types of output (such as symlinks, XML or s-expressions), see the discussion in the OPTIONS-
section below about --format.
The search pattern is taken as a command-line parameter. If the search parameter consists of multiple
parts (as in the example) they are treated as if there were a logical and between them.
For details on the possible queries, see mu-query(7).
FIND OPTIONS
Note, some of the important options are described in the mu(1) manual page and not here, as they apply
to multiple mu commands.
The find-command has various options that influence the way mu displays the results. If you don't specify
anything, the defaults are --fields="d f s", --sortfield=date and --reverse.
-f, --fields fields
Specifies a string that determines which fields are shown in the output. This string consists of a number
of characters (such as 's' for subject or 'f' for from), which will replace with the actual field in the
output. Fields that are not known will be output as-is, allowing for some simple formatting.
For example:
$ mu find subject:snow --fields "d f s"
lists the date, subject and sender of all messages with `snow' in the their subject.
The table of replacement characters is superset of the list mentions for search parameters, such as:
t *t*o: recipient
d Sent *d*ate of the message
f Message sender (*f*rom:)
g Message flags (fla*g*s)
l Full path to the message (*l*ocation)
s Message *s*ubject
i Message-*i*d
m *m*aildir
For the complete list, try the command: mu info fields.
The message flags are described in mu-query(7). As an example, a message which is `seen', has an
attachment and is signed would have `asz' as its corresponding output string, while an encrypted new
message would have `nx'.
-s, --sortfield field and -z,--reverse
Specify the field to sort the search results by and the direction (i.e., `reverse' means that the sort
should be reverted - Z-A). Examples include:
cc,c Cc (carbon-copy) recipient(s)
date,d Message sent date
from,f Message sender
maildir,m Maildir
msgid,i Message id
prio,p Nessage priority
subject,s Message subject
to,t To:-recipient(s)
For the complete list, try the command: mu info fields.
Thus, for example, to sort messages by date, you could specify:
$ mu find fahrrad --fields "d f s" --sortfield=date --reverse
Note, if you specify a sortfield, by default, messages are sorted in reverse (descending) order (e.g.,
from lowest to highest). This is usually a good choice, but for dates it may be more useful to sort in
the opposite direction.
-n, --maxnum number
If number > 0, display maximally that number of entries. If not specified, all matching entries are
displayed.
--summary-len number
If number > 0, use that number of lines of the message to provide a summary.
--format plain|links|xml|sexp
Output results in the specified format.
— The default is plain, i.e normal output with one line per message.
— links outputs the results as a maildir with symbolic links to the found messages. This enables easy
integration with mail-clients (see below for more information).
— xml formats the search results as XML.
— sexp formats the search results as an s-expression as used in Lisp programming environments.
--linksdir dir and -c, --clearlinks
When using --format=links, output the results as a maildir with symbolic links to the found messages.
This enables easy integration with mail-clients (see below for more information). mu will create the
maildir if it does not exist yet.
If you specify --clearlinks, existing symlinks will be cleared from the target directories; this allows
for re-use of the same maildir. However, this option will delete any symlink it finds, so be careful.
$ mu find grolsch --format=links --linksdir=~/Maildir/search --clearlinks
stores links to found messages in ~/Maildir/search. If the directory does not exist yet, it will be
created. Note: when mu creates a Maildir for these links, it automatically inserts a .noindex file, to
exclude the directory from mu index.
--after timestamp
Only show messages whose message files were last modified (mtime) after timestamp. timestamp is a UNIX
time_t value, the number of seconds since 1970-01-01 (in UTC).
From the command line, you can use the date command to get this value. For example, only consider
messages modified (or created) in the last 5 minutes, you could specify
--after=`date +%s --date='5 min ago'`
This is assuming the GNU date command.
--exec command
The --exec coption causes command to be executed on each matched message; for example, to see the raw
text of all messages matching `milkshake', you could use:
$ mu find milkshake --exec='less'
which is roughly equivalent to:
$ mu find milkshake --fields="l" | xargs less
-b, --bookmark bookmark
Use a bookmarked search query. Using this option, a query from your bookmark file will be prepended to
other search queries. See mu-bookmarks(5) for the details of the bookmarks file.
-u, --skip-dups
Whenever there are multiple messages with the same message-id field, only show the first one. This is
useful if you have copies of the same message, which is a common occurrence when using e.g. Gmail
together with offlineimap.
-r, --include-related
Include messages being referred to by the matched messages -- i.e.. include messages that are part of the
same message thread as some matched messages. This is useful if you want Gmail-style `conversations'.
-t, --threads
Show messages in a `threaded' format -- that is, with indentation and arrows showing the conversation
threads in the list of matching messages. When using this, sorting is chronological (by date), based on
the newest message in a thread.
Messages in the threaded list are indented based on the depth in the discussion, and are prefix with a
kind of arrow with thread-related information about the message, as in the following table:
| | normal | orphan | duplicate |
|-------------+--------+--------+-----------|
| first child | `-> | `*> | `=> |
| other | |-> | |*> | |=> |
Here, an `orphan' is a message without a parent message (in the list of matches), and a duplicate is a
message whose message-id was already seen before; not this may not really be the same message, if the
message-id was copied.
The algorithm used for determining the threads is based on Jamie Zawinksi's description:
http://www.jwz.org/doc/threading.html
-a,--analyze
Instead of executing the query, analyze it by show the parse-tree s-expression and a stringified version
of the Xapian query. This can help users to determine how mu interprets some query.
The output of this command are differ between versions, but should be helpful nevertheless.
--muhome
Use a non-default directory to store and read the database, write the logs, etc. By default, mu uses the
XDG Base Directory Specification (e.g. on GNU/Linux this defaults to ~/.cache/mu and ~/.config/mu).
Earlier versions of mu defaulted to ~/.mu, which now requires --muhome=~/.mu.
The environment variable MUHOME can be used as an alternative to --muhome. The latter has precedence.
COMMON OPTIONS
-d, --debug
Makes mu generate extra debug information, useful for debugging the program itself. By default, debug
information goes to the log file, ~/.cache/mu/mu.log. It can safely be deleted when mu is not running.
When running with --debug option, the log file can grow rather quickly. See the note on logging below.
-q, --quiet
Causes mu not to output informational messages and progress information to standard output, but only to
the log file. Error messages will still be sent to standard error. Note that mu index is much faster with
--quiet, so it is recommended you use this option when using mu from scripts etc.
--log-stderr
Causes mu to not output log messages to standard error, in addition to sending them to the log file.
--nocolor
Do not use ANSI colors. The environment variable NO_COLOR can be used as an alternative to --nocolor.
-V, --version
Prints mu version and copyright information.
-h, --help
Lists the various command line options.
INTEGRATION
It is possible to integrate mu find with some mail clients
mutt
For mutt you can use the following in your muttrc; pressing the F8 key will start a search, and F9 will
take you to the results.
# mutt macros for mu
macro index <F8> "<shell-escape>mu find --clearlinks --format=links --linksdir=~/Maildir/search " \
"mu find"
macro index <F9> "<change-folder-readonly>~/Maildir/search" \
"mu find results"
Wanderlust
Sam B suggested the following on the mu-mailing list. First add the following to your Wanderlust
configuration file:
(require 'elmo-search)
(elmo-search-register-engine
'mu 'local-file
:prog "/usr/local/bin/mu" ;; or wherever you've installed it
:args '("find" pattern "--fields" "l") :charset 'utf-8)
(setq elmo-search-default-engine 'mu)
;; for when you type "g" in folder or summary.
(setq wl-default-spec "[")
Now, you can search using the g key binding; you can also create permanent virtual folders when the
messages matching some expression by adding something like the following to your folders file.
VFolders {
[date:today..now]!mu "Today"
[size:1m..100m]!mu "Big"
[flag:unread]!mu "Unread"
}
After restarting Wanderlust, the virtual folders should appear.
ENCODING
mu find output is encoded according to the locale for --format=plain (the default format), and UTF-8 for
all other formats (sexp, xml).
PERFORMANCE
Some notes on performance, comparing the timings between some recent releases; taking the total number
for 10 test runs.
1. time (repeat 10 mu find "" -n 50000 > /dev/null)
2. time (repeat 10 mu find "" -n 50000 --include-related --threads > /dev/null)
┌─────────────────────────────────────────────┐
│ release time 1 (sec) time 2 (sec) │
├─────────────────────────────────────────────┤
│ 1.4 8.9s 59.3s │
│ 1.6 8.3s 27.5s │
│ 1.8 8.7s 29.3s │
│ 1.10 9.8s 30.6s │
│ 1.11 (master) 10.1s 29.5s │
└─────────────────────────────────────────────┘
EXIT CODE
This command returns 0 upon successful completion, or a non-zero exit code otherwise.
0. success
2. no matches found. Try a different query
11. database schema mismatch. You need to re-initialize mu, see mu-init(1)
19. failed to acquire lock. Some other program has exclusive access to the mu database
99. caught an exception
REPORTING BUGS
Please report bugs at https://github.com/djcb/mu/issues.
AUTHOR
Dirk-Jan C. Binnema <djcb@djcbsoftware.nl>
COPYRIGHT
This manpage is part of mu 1.12.6.
Copyright © 2008-2024 Dirk-Jan C. Binnema. License GPLv3+: GNU GPL version 3 or later
https://gnu.org/licenses/gpl.html. This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
mu(1), mu-index(1), mu-query(7), mu-info(1)
MU FIND(1)