Provided by: sidplayfp_2.6.2-1build2_amd64 
NAME
sidplayfp - a C64 and SID chip emulator for playing Commodore 64 music.
SYNOPSIS
sidplayfp [OPTIONS] datafile
DESCRIPTION
Sidplayfp is a music player that emulates various components from a Commodore 64 (C64) computer. The
result is a program which can load and execute C64 machine code programs which produce music and sound.
Sidplayfp has been designed for accuracy which results in a quite high cpu usage. Additional playback
modes have however been provided to allow playback on low specification machines at the cost of accuracy.
OPTIONS
-h, --help
Display help.
-h, --help-debug
Display additional options helpful for debugging.
-f<num>
Set audio output frequency in Hz (default: 48000).
-nf No filter emulation. This will reduce CPU overhead at the cost of reduced emulation quality.
-o<num>
Select track number (default: preset).
-s Stereo playback. If the tune is identified as stereo then sid 1 and 2 become the left and right
channels respectively. For three sid tunes the chips are mixed as left, center and right.
-m Mono playback.
-v|q[level]
Verbose or quiet (no time display) console output while playing. Can include an optional level,
defaults to 1.
-b<num>
Set start time in [mins:]secs[.milli] format (compatible with sid2wav).
-ds<addr>
Force dual sid environment by adding a second chip at specified address. This forces emulation of 2
sid-chips for stereo playback even if datafile is identified as only being mono. This occurs in the
case of the stereo prg format as currently there is no way to identify them. Stereo MUS and SID
files are however automatically detected. The second sid may be installed in the 0xD420-0xD7FF or
0xDE00-0xDFFF address range. Address may be specified in exadecimal (e.g -ds0xd420) or decimal
(e.g. -ds54304) format.
-ts<addr>
Add a third chip at specified address. The sid may be installed in the 0xD420-0xD7FF or
0xDE00-0xDFFF address range. Address may be specified in exadecimal (e.g -ts0xd440) or decimal
(e.g. -ts54336) format.
-u<num>
Mute a channel. May be used more than one time. Channel 1 to 3 are for the first SID chip while
channels from 4 to 6 are for the second one and 7 to 9 for the third.
-p<num>
Set bit precision for file saving. The default is 16 to create 16 bit signed samples, but can be set
to 32 (32 bit float). Other values will cause invalid output.
-o<l|s>
Option 'l' will select continuous track looping while 's' will select the current track instead of
all. This option can be combined with the track selection to form -ols<num>.
-t<num>
Set play length in [mins:]secs[.milli] format (0 is endless).
-v<n|p>[f]
Set VIC clock speed. 'n' is NTSC (America, 60Hz) and 'p' is PAL (Europe, 50Hz). Providing an 'f'
will prevent speed fixing that tries to compensate automatically for the speed difference. Removing
speed fixing simulates what happens on a real C64. Options can be written as: -vnf or -vn -vf.
-m<o|n>[f]
Set SID chip model. 'o' is the old 6581 and 'n' is the new 8580. Providing an 'f' will force the
selected model overriding the one specified by the tune.
--digiboost
Enable digiboost hack for 8580 model so the digi samples become audible.
-r<i|r>[f]
Set resampling mode. 'i' is interpolation (less expensive) and 'r' resampling (accurate). Providing
an 'f' will provide faster resampling sacrificing quality. Fast resampling is available only for
reSID emulation. Options can be written as: -rif or -ri -rf.
-w, --wav[name]
Create WAV-file. The default output filename is <datafile>[n].wav where [n] is the tune number
should there be more than one in the sid. This allows batch conversion of sid tunes without them
overwriting each other. By providing a name it is possible to override this default behavior. The
output file will be <name> with no tune number added and the extension .wav appended if no extension
is given.
--au[name]
Create AU-file. The default output filename is <datafile>[n].au. Same notes as the wav file applies.
--resid
Use VICE's original reSID emulation engine.
--residfp
Use reSIDfp emulation engine.
--hardsid
Use HardSID device.
--exsid
Use exSID device.
--cpu-debug
Display cpu register and assembly dumps, available only for debug builds.
--delay=[num]
Simulate c64 power on delay as number of cpu cycles. If greater than 8191 the delay will be random.
This is the default.
--fcurve=<num>|auto
Controls the filter curve in the ReSIDfp mulation. Ranges from 0.0 (light) to 1.0 (dark), the
default value is 0.5. If set to auto it will choose a predefined value for 6581 depending on the
tune author.
--noaudio
Run without an audio output device.
--nosid
Run without sid emulation.
--none
Run with no audio output device and no sid emulation.
Key bindings
1-9 Mute/unmute voice.
f Toggle filter.
p Pause/unpause playback.
Esc Quit player.
Up/Down Arrows
Increase/reset playback speed.
Left/Right Arrows
Move to previous/next subtune.
Home/End Arrows
Go to first/last subtune.
ENVIRONMENT VARIABLES
HVSC_BASE
The path to the HVSC base directory. If specified the songlength DB will be loaded from here and
relative SID tune paths are accepted.
FILES
sidplayfp.ini
The configuration file. See sidplayfp.ini(5) for further details.
kernal
The c64 kernal rom dump file.
basic
The c64 basic rom dump file.
chargen
The c64 character generator rom dump file.
BUGS
The upstream bug tracker can be found at <https://github.com/libsidplayfp/sidplayfp/issues/>.
SEE ALSO
sidplayfp.ini(5)
NOTES
ROM dumps are not embedded due to copyright issues and must be supplied by the user. Check the
sidplayfp.ini(5) documentation for configuration details and default search paths.
AUTHORS
Leandro Nini
Current maintainer.
Simon White
Wrote the original Sidplay2.
Dag Lem
Wrote the reSID emulation engine.
Antti S. Lankila
Wrote the reSIDfp emulation engine as a fork of reSID 0.16.
The Vice team
Large part of the emulation is based on the VICE's code.
André Fachat
Wrote the original reloc65 utility.
Michael Schwendt
Wrote the original SidTune library and MD5 class (based on work by L. Peter Deutsch).
Mikko Kilponen
Wrote the original man page.
RESOURCES
Home page: <https://github.com/libsidplayfp/>
Sidplay2 homepage: <http://sidplay2.sourceforge.net/>
High Voltage Sid Collection (HVSC): <http://hvsc.c64.org/>
COPYING
Copyright (C) 2000-2004 Simon White
Copyright (C) 2007-2010 Antti Lankila
Copyright (C) 2009-2015 VICE Project
Copyright (C) 2010-2024 Leandro Nini
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
perl v5.38.2 2024-04-01 SIDPLAYFP(1)