Provided by: remctl-server_3.17-1build7_amd64 
NAME
remctld - Server for remctl, a remote command execution utility
SYNOPSIS
remctld [-dFhmSvZ] [-b bind-address [-b bind-address ...]]
[-f config] [-k keytab] [-P file] [-p port]
[-s service]
DESCRIPTION
remctld is the server for remctl. It accepts a connection from remctl, receives the command to execute
and the arguments, verifies authorization of the user and executes the command, returning the result back
to the client. All connections are authenticated using Kerberos GSS-API Kerberos, and all transmissions
are also encrypted using the GSS-API privacy layer.
remctld is normally started using tcpserver or from inetd, but it may be run in stand-alone mode as a
daemon using -m. Either -s must be given to use an alternate identity (which will require the same flag
be used for remctl client invocations), or it must be run as root to read the host keytab file. remctld
logs its activity using syslog (the daemon facility).
The location of the configuration file may be specified with the -f option. The default location is
/etc/remctl/remctl.conf. For information on the format of the configuration file, see "CONFIGURATION
FILE" below.
When the command is run, several environment variables will be set providing information about the remote
connection. See ENVIRONMENT below for more information.
Command-line and configuration options and ACL methods are annotated below with the version at which they
were added. For version information for more general features, see COMPATIBILITY below.
OPTIONS
The start of each option description is annotated with the version of remctld in which that option was
added with its current meaning.
-b bind-address
[2.17] When running as a standalone server, bind to the specified local address rather than listening
on all interfaces. This option may be given multiple times to bind to multiple addresses. bind-
address must be an IP address (either IPv4 or IPv6), not a hostname. Only makes sense in combination
with -m.
This option is ignored if remctld is passed already open sockets via the systemd socket activation
protocol. In that case, the bind addresses of the sockets should be controlled via the systemd
configuration.
-d [1.10] Enable verbose debug logging to syslog (or to standard output if -S is also given).
-F [2.8] Normally when running in stand-alone mode (-m), remctld backgrounds itself to run as a daemon,
changes directory to /, and drops any controlling terminal. This flag suppresses this behavior,
usually for debugging or so that remctld can be monitored by other processes.
-f config
[1.0] The configuration file for remctld, overriding the default path.
-h [1.10] Show a brief usage message and then exit. This usage method will include a list of supported
ACL types and can be used to determine if optional ACL methods were compiled into a given remctld
build.
-k keytab
[2.8] Use keytab as the keytab for server credentials rather than the system default or the value of
the KRB5_KTNAME environment variable. Using -k just sets the KRB5_KTNAME environment variable
internally in the process.
-m [2.8] Enable stand-alone mode. remctld will listen to its configured port and fork a new child for
each incoming connection. By default, when this option is used, remctld also changes directory to /,
backgrounds itself, and closes standard input, output, and error. To not background, pass -F as
well. To not close standard output and error and continue using them for logging, pass -S as well.
To determine the port, remctld attempts to look up the "remctl" service in the local /etc/services
file and uses the port defined there. If the "remctl" service could not be found, it uses 4373, the
registered remctl port.
-P file
[2.0] When running in stand-alone mode (-m), write the PID of remctld to file. This option is
ignored unless -m is also given.
-p port
[1.0] When running in stand-alone mode, listen on port port rather than the default. This option
does nothing unless used with -m.
This option is ignored if remctld is passed already open sockets via the systemd socket activation
protocol. In that case, the listening port should be controlled via the systemd configuration.
-S [2.3] Rather than logging to syslog, log debug and routine connection messages to standard output and
error messages to standard error. This option is mostly useful for testing and debugging.
-s service
[1.0] Specifies which principal is used as the server identity for client authentication. The client
must also use the same identity as the server identity for authentication to succeed. By default,
remctld accepts any principal with a key in the default keytab file (which can be changed with the -k
option). This is normally the most desirable behavior.
-v [1.10] Print the version of remctld and exit.
-Z [3.7] When remctld is running in stand-alone mode, after it has set up its network socket and is
ready to answer requests, raise SIGSTOP. This signals to upstart, when using "expect stop", that the
daemon is ready to accept connections, and upstart will raise SIGCONT to allow remctld to continue.
This option is probably only useful when using upstart as the init system. Only makes sense in
combination with -m.
CONFIGURATION FILE
The configuration file defines the allowed commands and specifies access control information. The
configuration file format is lines of space- or tab-separated strings, where each line is:
command subcommand executable [option=value ...] acl [acl ...]
Each command consists of a command, a subcommand, and zero or more arguments. Each configuration line
defines an acceptable command and subcommand (or, if "ALL" is used as mentioned below under command and
subcommand, a set of commands). The first configuration line matching the received command is used, so
list more specific entries before more general entries.
Blank lines and lines beginning with "#" are ignored. Lines can be continued on the next line by ending
them with a backslash ("\"). Be aware that comments can be continued with a backslash as well.
As a special case, a line like:
include file
will include file as if its contents were pasted verbatim into the configuration file at that point.
file may be a directory, in which case all files whose names do not contain a period found in that
directory will be included (in no particular order). file should be a fully qualified path.
The meaning of the fields on each configuration line are:
command
The command being issued or the special keyword "ALL". Normally, related commands (such as all
commands for managing a particular service) are grouped together as subcommands under one command.
If the keyword "ALL" is used instead of a specific subcommand, this line matches all commands with
the given subcommand (so "ALL ALL" matches any command) and can be used to dispatch all commands to
the same executable with the same ACLs. Since the first matching entry is used, list entries for
specific commands first (if any) and then the "ALL" catch-all.
Note that while the subcommand is passed to the executable as a command-line option, the command is
not. The command is available to the executable in the environment variable REMCTL_COMMAND (see
ENVIRONMENT below).
The command "help" is handled specially if no such command is defined in the configuration file. See
below under the "help" and "summary" options.
subcommand
The subcommand within the command being requested, such as "release" for the release function of the
AFS volume backend, or one of the special keywords "ALL" or "EMPTY".
If the keyword "ALL" is used instead of a specific subcommand, this line matches all subcommands with
the given command and can be used to dispatch all subcommands under that command to the same
executable with the same ACLs. Since the first matching entry is used, list entries for specific
services first (if any) and then the "ALL" catch-all.
If the keyword "EMPTY" is used instead of a specific subcommand, this line matches only commands
where no subcommand was given.
The subcommand is always passed as the first argument to the executable program that is listed for
that service unless no subcommand was given.
executable
The full path to the command executable to run for this command and subcommand combination. (See
examples below.)
option=value
An option setting that applies to this command. Supported option settings, annotated with the
version at which that option was added in its current form, are:
help=arg
[3.2] Specifies the argument for this command that will print help for a particular subcommand to
standard output.
If remctld receives the command "help" with one or two arguments, and no "help" command is
defined in the configuration file, the server will take the command arguments as a command and
subcommand. It will then look through the configuration for a configuration line matching that
command and subcommand with a "help" option set. If one is found and the user is authorized to
run that command, the server will run the specified executable with the argument arg and second
and optional third arguments taken from the arguments to the "help" command, sending the output
back to the user.
This permits a standard interface to get additional help for a particular remctl command. Also
see the "summary" option.
logmask=n[,...]
[1.4] Limit logging of command arguments. Any argument listed in the logmask list will have its
value logged as "**MASKED**". This is to avoid logging the arguments of commands that take
private information such as passwords. The logmask list should contain argument numbers
separated by commas, with the subcommand considered argument 1. The command argument cannot be
masked.
For example, if the command is "admin passwd username password", then you'd want to set logmask
to 3, so the password argument gets logged as "**MASKED**". If the command is "user passwd
username old-password new-password", you'd want to set logmask to "3,4".
stdin=(n | "last")
[2.14] Specifies that the nth or last argument to the command be passed on standard input instead
of on the command line. The value of this option must either be the number of argument to pass
on standard input (with the subcommand considered argument 1) or the special value "last", which
indicates that the final argument (no matter how many there are) be passed on standard input.
The command cannot be passed on standard input, so n must be at least 1. If this option is set
to "last" and no arguments are given except the command and possibly the subcommand, nothing will
be passed on standard input.
This option is used primarily for passing large amounts of data that may not fit on the command
line or data that contains NUL characters. It can also be used for arguments like passwords that
shouldn't be exposed on the command line. Only at most one argument may be passed on standard
input to the command. Be aware that even if the subcommand is the designated argument to pass on
standard input ("stdin=1"), the subcommand may not contain NUL characters.
sudo=(username | #uid)
[3.12] Run this command as the specified user using sudo. This is exactly equivalent to
prepending "sudo -u username --" to the command before running it. The path to sudo is
determined when remctld is built.
The user option is simpler and easier if remctld is running as root. However, it may be
desirable in some configurations to run remctld as a non-root user, and remctl-shell (which
shares the same configuration files) usually runs as a non-root user. In those cases, this
option can be used to use sudo to switch users before running the command.
Since the argument is passed verbatim to sudo's -u option, you can specify a numeric UID by
prepending it with "#".
summary=arg
[3.13] Specifies the argument for this command that will print a usage summary to standard
output.
If remctld receives the command "help" with no arguments, and no "help" command is defined in the
configuration file, the server will look through the configuration for any command with a
"summary" option set. If this option is set, and the user is authorized to run the command, the
server will run the specified executable with the argument arg, sending the output back to the
user. It will do this for every command in the configuration that meets the above criteria.
This allows display of a summary of available commands to the user based on which commands that
user is authorized to run. It's a lightweight form of service discovery. Also see the "help"
option.
user=(username | uid)
[3.1] Run this command as the specified user, which can be given as either a username or as a
UID. Even if given as a UID, the user must be found in the user database (searched via
getpwuid(3)). remctld will run the command as the specified user, including that user's primary
and supplemental groups.
acl One or more entries of the form [method:]data, where method specifies an access control method to be
used, and data contains parameters whose meaning depends on the method. If the method is omitted,
the data is processed as described for the "file" method.
If method is omitted, acl must either begin with "/" or must not contain "=". Otherwise, it will be
parsed as an option instead. If there is any ambiguity, prepend the method.
As a special exception for backward compatibility, the ACL "ANYUSER" (case-sensitive) is treated as
equivalent to "anyuser:auth".
Each entry is checked in order, and access is granted as soon as an entry matches. If no entry
matches, access is denied. The following methods may supported; however, be aware that the
availability of several ACL types depends on whether remctld was built with that support. Each ACL
type is annotated with the version in which it was added.
anyuser
[3.10] Permit access to any user. This comes in two forms:
anyuser:auth
Permit any authenticated user. This means not only the local Kerberos realm but also any
realm with which there is a cross-realm trust relationship.
anyuser:anonymous
Permit entirely anonymous users. This means no authentication whatsoever is required to run
the command. Any client with network access to the server can run the command (using
anonymous PKINIT), assuming that anonymous service tickets are enabled for the local Kerberos
realm.
For backwards compatibility, the ACL "ANYUSER" is treated as identical to "anyuser:auth". This
was the only supported any-user ACL syntax prior to remctl 3.10.
file
[2.13] The data is the full path of an ACL file or to a directory containing ACL files.
Directories are handled as described for the include directive in configuration files. An ACL
file contains one entry per line, in the [method:]data form described above. Entries are handled
exactly as if they had appeared in the configuration file except that the default method is
"princ" instead of "file". Blank lines and lines beginning with "#" are ignored in the ACL
files.
For backward compatibility, a line like:
include [<method>:]<data>
in an ACL file behaves exactly as if the "include" directive had been omitted, except that the
default method is "file". Thus, writing:
include <path>
in an ACL file is the same as writing:
file:<path>
and is handled identically to the include directive in configuration files.
princ
[2.13] The data is the name of a Kerberos v5 principal which is to be granted access, such as
"username@EXAMPLE.ORG".
deny
[2.13] This method is used to selectively deny access. The data is parsed as a [method:]data and
evaluated as described above, with the default scheme being "princ". If it matches, access is
denied immediately without examining any further entries. Otherwise, processing continues.
Remember that access is granted as soon as an entry matches. For "deny" rules to be effective,
they therefore must come before any ACLs they are intended to override. Be careful when using
"deny" when including a directory of ACL files, since the files in that directory are read in an
undefined order (not in alphabetical order by filename). It's best to explicitly include the
file containing "deny" ACL rules first.
Note that "deny" only denies access; it never grants it. Thus, deny alone does not grant access
to anyone, and using deny on itself as in "deny:deny:foo" neither denies nor grants access to
anyone.
gput
[2.13] This method is used to grant access based on the CMU GPUT (Global Privileged User Table --
see gput(5)). The data is either a GPUT role name or a string of the form group[xform], where
group is a GPUT role name and xform is a GPUT transform string. Access is granted if the user is
a member of the specified GPUT group, after applying either the optional xform or the default
transform.
This method is supported only if remctld was compiled with GPUT support by using the
"--with-gput" configure option.
localgroup
[3.9] This method is used to grant or deny access based on membership in local UNIX groups. The
data is taken to be a name of a local system group. The user principal is converted to a local
user name with krb5_aname_to_localname(3) and then compared to the members of the given group.
For example, to allow access to the members of group "goodguys", use an ACL of
"localgroup:goodguys" syntax. To deny access to the members of group "badguys", use
"deny:localgroup:badguys".
krb5_aname_to_localname() follows local configuration rules to determine how to convert Kerberos
principal to local users. If the realm of the principal is not in a local realm and is not
otherwise covered by one of those rules, the principal will be unchanged, which will almost
certainly mean that it will not be a member of any local group and access will be denied.
This method is supported only if remctld was built with Kerberos support and the getgrnam_r(3)
library function was supported by the C library when it was built.
pcre
[2.16] This method is used to grant or deny access based on Perl-compatible regular expressions.
The data is taken to be a Perl-compatible regular expression and matched against the user
identity. To deny access, use the "deny:pcre:regex" syntax.
This method is supported only if remctld was compiled with PCRE support by using the
"--with-pcre" configure option.
regex
[2.16] This method is used to grant or deny access based on POSIX extended regular expressions.
The data is taken to be a POSIX extended regular expression (like those used by egrep) and
matched against the user identity. To deny access, use the "deny:regex:regex" syntax.
This method is supported only if a library for POSIX-compatible regular expressions was found
when remctld was built.
To see the list of ACL types supported by a particular build of remctld, run "remctld -h".
The keyword ANYUSER may be used instead of the ACLs to allow access to all users. The user still
needs to authenticate to remctld; this only affects authorization. This can be used for backend
programs that want to check ACLs themselves and will retrieve the authenticated principal from the
REMOTE_USER environment variable. Note that ANYUSER accepts any authenticated user, including cross-
realm users from foreign Kerberos realms.
ENVIRONMENT
remctld itself uses the following environment variables when run in stand-alone mode (-m):
LISTEN_FDS
LISTEN_PID
If these environment variables are set, remctld will expect to be provided its listening sockets via
the systemd socket activation protocol and will not attempt to bind its own sockets. For more
details on the protocol, see daemon(7) and sd_listen_fds(3).
NOTIFY_SOCKET
If this environment variable is set, remctld will notify the socket named in this variable when it is
ready to accept incoming packets using the systemd status notification protocol. For more details,
see daemon(7) and sd_notify(3).
Note that using socket activation is recommended when running under systemd in stand-alone mode, and
status notification is not necessary or useful when using socket activation.
When running in stand-alone mode, these environment variables will be cleared by remctld before running
any commands.
The following environment variables will be set for any commands run via remctld (annotated with the
version at which they were added):
REMCTL_COMMAND
[2.16] The command string that caused this command to be run. This variable will contain only the
command, not the subcommand or any additional arguments (which are passed as command arguments).
REMOTE_ADDR
[2.1] The IP address of the remote host. This may be IPv4 or IPv6.
REMOTE_EXPIRES
[3.10] The time (in seconds since UNIX epoch) when the authenticated remote session will expire.
This will normally be the expiration time of the Kerberos ticket used to authenticate to the server.
REMOTE_HOST
[2.1] The hostname of the remote host, if it was available. If reverse name resolution failed, this
environment variable will not be set.
This is determined via a simple reverse DNS lookup and should be considered under the control of the
client. remctl commands should treat it with skepticism and not use it for anything other than
logging purposes.
REMOTE_USER
REMUSER
[1.0 for REMUSER, 2.1 for REMOTE_USER] Set to the Kerberos principal of the authenticated client.
If the -k flag is used, remctld will also set KRB5_KTNAME to the provided keytab path. This is primarily
for communication with the GSS-API library, but this setting will also be inherited by any commands run
by remctld.
EXAMPLES
Typically remctld is to be started as follows, where "hostname" is the machine where remctld will run,
and 4373 is the port:
tcpserver hostname 4373 remctld
The equivalent line for /etc/inetd.conf is:
4373 stream tcp nowait root /usr/sbin/tcpd /usr/sbin/remctld
or:
remctl stream tcp nowait root /usr/sbin/tcpd /usr/sbin/remctld
if the "remctl" service is listed in your /etc/services file.
To start remctld in stand-alone mode instead, run:
remctld -m
To start remctld in stand-alone mode in the foreground, use:
remctld -F -m
This is a typical invocation with systemd using socket activation. For upstart (with "expect stop"),
use:
remctld -F -m -Z
Example configuration file:
# Comments can be used like this.
accounts create /usr/local/bin/doaccount /etc/acl/group1 \
/etc/acl/group2
accounts delete /usr/local/bin/doaccount /etc/acl/group3
accounts view /usr/local/bin/doaccount ANYUSER
accounts passwd /usr/local/bin/dopasswd logmask=3 /etc/acl/group1
printing ALL /usr/local/bin/printthing /etc/acl/group2
The commands "accounts create", "accounts delete", and so forth will all be passed to
/usr/local/bin/doaccount with the first argument being the specific subcommand, with the exception of
"accounts passwd". That command will be passed to /usr/local/bin/dopasswd instead, but it will still get
"passwd" as its first argument. The third argument to "accounts passwd" (presumably the password) will
not be logged to syslog. All commands starting with "printing" will be passed to
/usr/local/bin/printthing.
Example ACL file:
# This is a comment.
deny:baduser@EXAMPLE.ORG
file:/etc/remctl/acl/admins
principal:service/admin@EXAMPLE.ORG
service/other@EXAMPLE.ORG
This ACL file will reject "baduser@EXAMPLE.ORG" even if that user would have been allowed by one of the
other ACL rules. It will then grant access according to the ACL entries in /etc/remctl/acl/admins and
the specific principals "service/admin@EXAMPLE.ORG" and "service/other@EXAMPLE.ORG". The last line takes
advantage of the default ACL method of "principal" when processing an ACL file.
COMPATIBILITY
The version at which various command-line and configuration options and ACL methods were added to remctld
are noted in their descriptions. Below is the version information for more general features, in reverse
order of when the feature was added.
Support for the systemd readiness protocol and socket activation, including honoring the environment
variables LISTEN_FDS, LISTEN_PID, and NOTIFY_SOCKET, was added in version 3.7.
Special handling of the "help" and "summary" commands was added in version 3.2.
Support for the "ALL" keyword in the command field of the configuration file was added in version 2.15.
(It has always been supported in the subcommand field.)
Support for the "EMPTY" keyword in the subcommand field of the configuration file was added in version
2.15.
Support for ACL schemes and the method:data syntax was added in remctl 2.13. Prior versions of remctld
expected only files in the main remctld configuration file, and only principals or lines starting with
"include" in those files, without any method: prefixes.
The default listening port with the -m option was changed to the IANA-registered port of 4373 in version
2.11.
Support for IPv6 addresses in the REMOTE_ADDR environment variable was added in version 2.4.
remctld used to set the environment variable SCPRINCIPAL when running commands, for (partial) backward
compatibility with sysctld, but stopped doing so in version 2.1.
"include" directives in ACL files were added in version 1.11. "include" directives in configuration
files were added in version 1.8.
CAVEATS
When using Heimdal with triple-DES keys and talking to old clients that only speak version one of the
remctl protocol, remctld may have problems with MIC verification. This doesn't affect new clients and
servers since the version two protocol doesn't use MICs. If you are using Heimdal and run into MIC
verification problems, see the COMPATIBILITY section of gssapi(3).
remctld does not itself impose any limits on the number of child processes or other system resources.
You may want to set resource limits in your inetd server or with ulimit when running it as a standalone
daemon or under tcpserver.
Command arguments may not contain NUL characters and must be shorter than the operating system limit on
the length of a command line since they're passed to the command as command-line arguments. The
exception is an argument passed via standard input using the "stdin=" option in the configuration file.
At most one argument may be passed that way.
NOTES
The remctl port number, 4373, was derived by tracing the diagonals of a QWERTY keyboard up from the
letters "remc" to the number row.
AUTHOR
remctld was originally written by Anton Ushakov. Updates and current maintenance are done by Russ
Allbery <eagle@eyrie.org>.
COPYRIGHT AND LICENSE
Copyright 2002-2012, 2014 The Board of Trustees of the Leland Stanford Junior University
Copying and distribution of this file, with or without modification, are permitted in any medium without
royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without
any warranty.
SPDX-License-Identifier: FSFAP
SEE ALSO
remctl(1), syslog(3), tcpserver(1)
The current version of this program is available from its web page at
<https://www.eyrie.org/~eagle/software/remctl/>.
3.17 2020-12-13 REMCTLD(8)