Provided by: ntp_4.2.8p15+dfsg-1ubuntu2_amd64 
NAME
ntp-keygen — Create a NTP host key
SYNOPSIS
ntp-keygen [-flags] [-flag [value]] [--option-name[[=| ]value]]
All arguments must be options.
DESCRIPTION
This program generates cryptographic data files used by the NTPv4 authentication and identification
schemes. It can generate message digest keys used in symmetric key cryptography and, if the OpenSSL
software library has been installed, it can generate host keys, signing keys, certificates, and identity
keys and parameters used in Autokey public key cryptography. These files are used for cookie encryption,
digital signature, and challenge/response identification algorithms compatible with the Internet standard
security infrastructure.
The message digest symmetric keys file is generated in a format compatible with NTPv3. All other files
are in PEM-encoded printable ASCII format, so they can be embedded as MIME attachments in email to other
sites and certificate authorities. By default, files are not encrypted.
When used to generate message digest symmetric keys, the program produces a file containing ten
pseudo-random printable ASCII strings suitable for the MD5 message digest algorithm included in the
distribution. If the OpenSSL library is installed, it produces an additional ten hex-encoded random bit
strings suitable for SHA1, AES-128-CMAC, and other message digest algorithms. The message digest
symmetric keys file must be distributed and stored using secure means beyond the scope of NTP itself.
Besides the keys used for ordinary NTP associations, additional keys can be defined as passwords for the
ntpq(1) and ntpdc(1) utility programs.
The remaining generated files are compatible with other OpenSSL applications and other Public Key
Infrastructure (PKI) resources. Certificates generated by this program are compatible with extant
industry practice, although some users might find the interpretation of X509v3 extension fields somewhat
liberal. However, the identity keys are probably not compatible with anything other than Autokey.
Some files used by this program are encrypted using a private password. The -p option specifies the read
password for local encrypted files and the -q option the write password for encrypted files sent to
remote sites. If no password is specified, the host name returned by the Unix hostname(1) command,
normally the DNS name of the host, is used as the the default read password, for convenience. The
ntp-keygen program prompts for the password if it reads an encrypted file and the password is missing or
incorrect. If an encrypted file is read successfully and no write password is specified, the read
password is used as the write password by default.
The pw option of the crypto ntpd(8) configuration command specifies the read password for previously
encrypted local files. This must match the local read password used by this program. If not specified,
the host name is used. Thus, if files are generated by this program without an explicit password, they
can be read back by ntpd(8) without specifying an explicit password but only on the same host. If the
write password used for encryption is specified as the host name, these files can be read by that host
with no explicit password.
Normally, encrypted files for each host are generated by that host and used only by that host, although
exceptions exist as noted later on this page. The symmetric keys file, normally called ntp.keys, is
usually installed in /etc. Other files and links are usually installed in /usr/local/etc, which is
normally in a shared filesystem in NFS-mounted networks and cannot be changed by shared clients. In
these cases, NFS clients can specify the files in another directory such as /etc using the keysdir
ntpd(8) configuration file command.
This program directs commentary and error messages to the standard error stream stderr and remote files
to the standard output stream stdout where they can be piped to other applications or redirected to
files. The names used for generated files and links all begin with the string ntpkey* and include the
file type, generating host and filestamp, as described in the “Cryptographic Data Files” section below.
Running the Program
The safest way to run the ntp-keygen program is logged in directly as root. The recommended procedure is
change to the keys directory, usually /usr/local/etc, then run the program.
To test and gain experience with Autokey concepts, log in as root and change to the keys directory,
usually /usr/local/etc. When run for the first time, or if all files with names beginning with ntpkey*
have been removed, use the ntp-keygen command without arguments to generate a default RSA host key and
matching RSA-MD5 certificate file with expiration date one year hence, which is all that is necessary in
many cases. The program also generates soft links from the generic names to the respective files. If
run again without options, the program uses the existing keys and parameters and generates a new
certificate file with new expiration date one year hence, and soft link.
The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host
key is also the sign key used to encrypt signatures. When necessary, a different sign key can be
specified and this can be either RSA or DSA type. By default, the message digest type is MD5, but any
combination of sign key type and message digest type supported by the OpenSSL library can be specified,
including those using the AES128CMAC, MD2, MD5, MDC2, SHA, SHA1 and RIPE160 message digest algorithms.
However, the scheme specified in the certificate must be compatible with the sign key. Certificates
using any digest algorithm are compatible with RSA sign keys; however, only SHA and SHA1 certificates are
compatible with DSA sign keys.
Private/public key files and certificates are compatible with other OpenSSL applications and very likely
other libraries as well. Certificates or certificate requests derived from them should be compatible
with extant industry practice, although some users might find the interpretation of X509v3 extension
fields somewhat liberal. However, the identification parameter files, although encoded as the other
files, are probably not compatible with anything other than Autokey.
Running the program as other than root and using the Unix su(1) command to assume root may not work
properly, since by default the OpenSSL library looks for the random seed file .rnd in the user home
directory. However, there should be only one .rnd, most conveniently in the root directory, so it is
convenient to define the RANDFILE environment variable used by the OpenSSL library as the path to .rnd.
Installing the keys as root might not work in NFS-mounted shared file systems, as NFS clients may not be
able to write to the shared keys directory, even as root. In this case, NFS clients can specify the
files in another directory such as /etc using the keysdir ntpd(8) configuration file command. There is
no need for one client to read the keys and certificates of other clients or servers, as these data are
obtained automatically by the Autokey protocol.
Ordinarily, cryptographic files are generated by the host that uses them, but it is possible for a
trusted agent (TA) to generate these files for other hosts; however, in such cases files should always be
encrypted. The subject name and trusted name default to the hostname of the host generating the files,
but can be changed by command line options. It is convenient to designate the owner name and trusted
name as the subject and issuer fields, respectively, of the certificate. The owner name is also used for
the host and sign key files, while the trusted name is used for the identity files.
All files are installed by default in the keys directory /usr/local/etc, which is normally in a shared
filesystem in NFS-mounted networks. The actual location of the keys directory and each file can be
overridden by configuration commands, but this is not recommended. Normally, the files for each host are
generated by that host and used only by that host, although exceptions exist as noted later on this page.
Normally, files containing private values, including the host key, sign key and identification
parameters, are permitted root read/write-only; while others containing public values are permitted world
readable. Alternatively, files containing private values can be encrypted and these files permitted
world readable, which simplifies maintenance in shared file systems. Since uniqueness is insured by the
hostname and filestamp file name extensions, the files for an NTP server and dependent clients can all be
installed in the same shared directory.
The recommended practice is to keep the file name extensions when installing a file and to install a soft
link from the generic names specified elsewhere on this page to the generated files. This allows new
file generations to be activated simply by changing the link. If a link is present, ntpd(8) follows it
to the file name to extract the filestamp. If a link is not present, ntpd(8) extracts the filestamp from
the file itself. This allows clients to verify that the file and generation times are always current.
The ntp-keygen program uses the same filestamp extension for all files generated at one time, so each
generation is distinct and can be readily recognized in monitoring data.
Run the command on as many hosts as necessary. Designate one of them as the trusted host (TH) using
ntp-keygen with the -T option and configure it to synchronize from reliable Internet servers. Then
configure the other hosts to synchronize to the TH directly or indirectly. A certificate trail is
created when Autokey asks the immediately ascendant host towards the TH to sign its certificate, which is
then provided to the immediately descendant host on request. All group hosts should have acyclic
certificate trails ending on the TH.
The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host
key is also the sign key used to encrypt signatures. A different sign key can be assigned using the -S
option and this can be either RSA or DSA type. By default, the signature message digest type is MD5, but
any combination of sign key type and message digest type supported by the OpenSSL library can be
specified using the -c option.
The rules say cryptographic media should be generated with proventic filestamps, which means the host
should already be synchronized before this program is run. This of course creates a chicken-and-egg
problem when the host is started for the first time. Accordingly, the host time should be set by some
other means, such as eyeball-and-wristwatch, at least so that the certificate lifetime is within the
current year. After that and when the host is synchronized to a proventic source, the certificate should
be re-generated.
Additional information on trusted groups and identity schemes is on the “Autokey Public-Key
Authentication” page.
File names begin with the prefix ntpkey_ and end with the suffix _hostname. filestamp, where hostname is
the owner name, usually the string returned by the Unix hostname(1) command, and filestamp is the NTP
seconds when the file was generated, in decimal digits. This both guarantees uniqueness and simplifies
maintenance procedures, since all files can be quickly removed by a rm ntpkey* command or all files
generated at a specific time can be removed by a rm *filestamp command. To further reduce the risk of
misconfiguration, the first two lines of a file contain the file name and generation date and time as
comments.
Trusted Hosts and Groups
Each cryptographic configuration involves selection of a signature scheme and identification scheme,
called a cryptotype, as explained in the “Authentication Options” section of ntp.conf(5). The default
cryptotype uses RSA encryption, MD5 message digest and TC identification. First, configure a NTP subnet
including one or more low-stratum trusted hosts from which all other hosts derive synchronization
directly or indirectly. Trusted hosts have trusted certificates; all other hosts have nontrusted
certificates. These hosts will automatically and dynamically build authoritative certificate trails to
one or more trusted hosts. A trusted group is the set of all hosts that have, directly or indirectly, a
certificate trail ending at a trusted host. The trail is defined by static configuration file entries or
dynamic means described on the “Automatic NTP Configuration Options” section of ntp.conf(5).
On each trusted host as root, change to the keys directory. To insure a fresh fileset, remove all ntpkey
files. Then run ntp-keygen -T to generate keys and a trusted certificate. On all other hosts do the
same, but leave off the -T flag to generate keys and nontrusted certificates. When complete, start the
NTP daemons beginning at the lowest stratum and working up the tree. It may take some time for Autokey
to instantiate the certificate trails throughout the subnet, but setting up the environment is completely
automatic.
If it is necessary to use a different sign key or different digest/signature scheme than the default, run
ntp-keygen with the -S type option, where type is either RSA or DSA. The most frequent need to do this
is when a DSA-signed certificate is used. If it is necessary to use a different certificate scheme than
the default, run ntp-keygen with the -c scheme option and selected scheme as needed. If ntp-keygen is
run again without these options, it generates a new certificate using the same scheme and sign key, and
soft link.
After setting up the environment it is advisable to update certificates from time to time, if only to
extend the validity interval. Simply run ntp-keygen with the same flags as before to generate new
certificates using existing keys, and soft links. However, if the host or sign key is changed, ntpd(8)
should be restarted. When ntpd(8) is restarted, it loads any new files and restarts the protocol. Other
dependent hosts will continue as usual until signatures are refreshed, at which time the protocol is
restarted.
Identity Schemes
As mentioned on the Autonomous Authentication page, the default TC identity scheme is vulnerable to a
middleman attack. However, there are more secure identity schemes available, including PC, IFF, GQ and
MV schemes described below. These schemes are based on a TA, one or more trusted hosts and some number
of nontrusted hosts. Trusted hosts prove identity using values provided by the TA, while the remaining
hosts prove identity using values provided by a trusted host and certificate trails that end on that
host. The name of a trusted host is also the name of its sugroup and also the subject and issuer name on
its trusted certificate. The TA is not necessarily a trusted host in this sense, but often is.
In some schemes there are separate keys for servers and clients. A server can also be a client of
another server, but a client can never be a server for another client. In general, trusted hosts and
nontrusted hosts that operate as both server and client have parameter files that contain both server and
client keys. Hosts that operate only as clients have key files that contain only client keys.
The PC scheme supports only one trusted host in the group. On trusted host alice run ntp-keygen -P -p
password to generate the host key file ntpkey_ RSA key_alice. filestamp and trusted private certificate
file ntpkey_ RSA-MD5 _ cert_alice. filestamp, and soft links. Copy both files to all group hosts; they
replace the files which would be generated in other schemes. On each host bob install a soft link from
the generic name ntpkey_host_bob to the host key file and soft link ntpkey_cert_bob to the private
certificate file. Note the generic links are on bob, but point to files generated by trusted host alice.
In this scheme it is not possible to refresh either the keys or certificates without copying them to all
other hosts in the group, and recreating the soft links.
For the IFF scheme proceed as in the TC scheme to generate keys and certificates for all group hosts,
then for every trusted host in the group, generate the IFF parameter file. On trusted host alice run
ntp-keygen -T -I -p password to produce her parameter file ntpkey_IFFpar_alice.filestamp, which includes
both server and client keys. Copy this file to all group hosts that operate as both servers and clients
and install a soft link from the generic ntpkey_iff_alice to this file. If there are no hosts restricted
to operate only as clients, there is nothing further to do. As the IFF scheme is independent of keys and
certificates, these files can be refreshed as needed.
If a rogue client has the parameter file, it could masquerade as a legitimate server and present a
middleman threat. To eliminate this threat, the client keys can be extracted from the parameter file and
distributed to all restricted clients. After generating the parameter file, on alice run ntp-keygen -e
and pipe the output to a file or email program. Copy or email this file to all restricted clients. On
these clients install a soft link from the generic ntpkey_iff_alice to this file. To further protect the
integrity of the keys, each file can be encrypted with a secret password.
For the GQ scheme proceed as in the TC scheme to generate keys and certificates for all group hosts, then
for every trusted host in the group, generate the IFF parameter file. On trusted host alice run
ntp-keygen -T -G -p password to produce her parameter file ntpkey_GQpar_alice.filestamp, which includes
both server and client keys. Copy this file to all group hosts and install a soft link from the generic
ntpkey_gq_alice to this file. In addition, on each host bob install a soft link from generic
ntpkey_gq_bob to this file. As the GQ scheme updates the GQ parameters file and certificate at the same
time, keys and certificates can be regenerated as needed.
For the MV scheme, proceed as in the TC scheme to generate keys and certificates for all group hosts.
For illustration assume trish is the TA, alice one of several trusted hosts and bob one of her clients.
On TA trish run ntp-keygen -V n -p password, where n is the number of revokable keys (typically 5) to
produce the parameter file ntpkeys_MVpar_trish.filestamp and client key files ntpkeys_MVkeyd _ trish.
filestamp where d is the key number (0 < d < n). Copy the parameter file to alice and install a soft
link from the generic ntpkey_mv_alice to this file. Copy one of the client key files to alice for later
distribution to her clients. It does not matter which client key file goes to alice, since they all work
the same way. Alice copies the client key file to all of her clients. On client bob install a soft link
from generic ntpkey_mvkey_bob to the client key file. As the MV scheme is independent of keys and
certificates, these files can be refreshed as needed.
Command Line Options
-b --imbits= modulus
Set the number of bits in the identity modulus for generating identity keys to modulus bits. The
number of bits in the identity modulus defaults to 256, but can be set to values from 256 to 2048
(32 to 256 octets). Use the larger moduli with caution, as this can consume considerable
computing resources and increases the size of authenticated packets.
-c --certificate= scheme
Select certificate signature encryption/message digest scheme. The scheme can be one of the
following: RSA-MD2, RSA-MD5, RSA-MDC2, RSA-SHA, RSA-SHA1, RSA-RIPEMD160, DSA-SHA, or DSA-SHA1.
Note that RSA schemes must be used with an RSA sign key and DSA schemes must be used with a DSA
sign key. The default without this option is RSA-MD5. If compatibility with FIPS 140-2 is
required, either the DSA-SHA or DSA-SHA1 scheme must be used.
-C --cipher= cipher
Select the OpenSSL cipher to encrypt the files containing private keys. The default without this
option is three-key triple DES in CBC mode, des-ede3-cbc. The openssl -h command provided with
OpenSSL displays available ciphers.
-d --debug-level
Increase debugging verbosity level. This option displays the cryptographic data produced in
eye-friendly billboards.
-D --set-debug-level= level
Set the debugging verbosity to level. This option displays the cryptographic data produced in
eye-friendly billboards.
-e --id-key
Write the IFF or GQ public parameters from the IFFkey or GQkey client keys file previously
specified as unencrypted data to the standard output stream stdout. This is intended for
automatic key distribution by email.
-G --gq-params
Generate a new encrypted GQ parameters and key file for the Guillou-Quisquater (GQ) identity
scheme. This option is mutually exclusive with the -I and -V options.
-H --host-key
Generate a new encrypted RSA public/private host key file.
-I --iffkey
Generate a new encrypted IFF key file for the Schnorr (IFF) identity scheme. This option is
mutually exclusive with the -G and Fl V options.
-i --ident= group
Set the optional Autokey group name to group. This is used in the identity scheme parameter file
names of IFF, GQ, and MV client parameters files. In that role, the default is the host name if
no group is provided. The group name, if specified using -i or -s following an ‘@’ character, is
also used in certificate subject and issuer names in the form host @ group and should match the
group specified via crypto ident or server ident in the ntpd configuration file.
-l --lifetime= days
Set the lifetime for certificate expiration to days. The default lifetime is one year (365
days).
-m --modulus= bits
Set the number of bits in the prime modulus for generating files to bits. The modulus defaults
to 512, but can be set from 256 to 2048 (32 to 256 octets). Use the larger moduli with caution,
as this can consume considerable computing resources and increases the size of authenticated
packets.
-M --md5key
Generate a new symmetric keys file containing 10 MD5 keys, and if OpenSSL is available, 10 SHA
keys. An MD5 key is a string of 20 random printable ASCII characters, while a SHA key is a
string of 40 random hex digits. The file can be edited using a text editor to change the key
type or key content. This option is mutually exclusive with all other options.
-p --password= passwd
Set the password for reading and writing encrypted files to passwd. These include the host, sign
and identify key files. By default, the password is the string returned by the Unix hostname
command.
-P --pvt-cert
Generate a new private certificate used by the PC identity scheme. By default, the program
generates public certificates. Note: the PC identity scheme is not recommended for new
installations.
-q --export-passwd= passwd
Set the password for writing encrypted IFF, GQ and MV identity files redirected to stdout to
passwd. In effect, these files are decrypted with the -p password, then encrypted with the -q
password. By default, the password is the string returned by the Unix hostname command.
-s --subject-key= file ... [host] [@ group]
Specify the Autokey host name, where host is the optional host name and group is the optional
group name. The host name, and if provided, group name are used in host @ group form as
certificate subject and issuer. Specifying -s -@ group is allowed, and results in leaving the
host name unchanged, as with -i group. The group name, or if no group is provided, the host name
are also used in the file names of IFF, GQ, and MV identity scheme client parameter files. If
host is not specified, the default host name is the string returned by the Unix hostname command.
-S --sign-key= [RSA | DSA]
Generate a new encrypted public/private sign key file of the specified type. By default, the
sign key is the host key and has the same type. If compatibility with FIPS 140-2 is required,
the sign key type must be DSA.
-T --trusted-cert
Generate a trusted certificate. By default, the program generates a non-trusted certificate.
-V --mv-params nkeys
Generate nkeys encrypted server keys and parameters for the Mu-Varadharajan (MV) identity scheme.
This option is mutually exclusive with the -I and -G options. Note: support for this option
should be considered a work in progress.
Random Seed File
All cryptographically sound key generation schemes must have means to randomize the entropy seed used to
initialize the internal pseudo-random number generator used by the library routines. The OpenSSL library
uses a designated random seed file for this purpose. The file must be available when starting the NTP
daemon and ntp-keygen program. If a site supports OpenSSL or its companion OpenSSH, it is very likely
that means to do this are already available.
It is important to understand that entropy must be evolved for each generation, for otherwise the random
number sequence would be predictable. Various means dependent on external events, such as keystroke
intervals, can be used to do this and some systems have built-in entropy sources. Suitable means are
described in the OpenSSL software documentation, but are outside the scope of this page.
The entropy seed used by the OpenSSL library is contained in a file, usually called .rnd, which must be
available when starting the NTP daemon or the ntp-keygen program. The NTP daemon will first look for the
file using the path specified by the randfile subcommand of the crypto configuration command. If not
specified in this way, or when starting the ntp-keygen program, the OpenSSL library will look for the
file using the path specified by the RANDFILE environment variable in the user home directory, whether
root or some other user. If the RANDFILE environment variable is not present, the library will look for
the .rnd file in the user home directory. Since both the ntp-keygen program and ntpd(8) daemon must run
as root, the logical place to put this file is in /.rnd or /root/.rnd. If the file is not available or
cannot be written, the daemon exits with a message to the system log and the program exits with a
suitable error message.
Cryptographic Data Files
All file formats begin with two nonencrypted lines. The first line contains the file name, including the
generated host name and filestamp, in the format ntpkey_key _ name. filestamp, where key is the key or
parameter type, name is the host or group name and filestamp is the filestamp (NTP seconds) when the file
was created. By convention, key names in generated file names include both upper and lower case
characters, while key names in generated link names include only lower case characters. The filestamp is
not used in generated link names. The second line contains the datestamp in conventional Unix date
format. Lines beginning with ‘#’ are considered comments and ignored by the ntp-keygen program and
ntpd(8) daemon.
The remainder of the file contains cryptographic data, encoded first using ASN.1 rules, then encrypted if
necessary, and finally written in PEM-encoded printable ASCII text, preceded and followed by MIME content
identifier lines.
The format of the symmetric keys file, ordinarily named ntp.keys, is somewhat different than the other
files in the interest of backward compatibility. Ordinarily, the file is generated by this program, but
it can be constructed and edited using an ordinary text editor.
# ntpkey_MD5key_bk.ntp.org.3595864945
# Thu Dec 12 19:22:25 2013
1 MD5 L";Nw<`.I<f4U0)247"i # MD5 key
2 MD5 &>l0%XXK9O'51VwV<xq~ # MD5 key
3 MD5 lb4zLW~d^!K:]RsD'qb6 # MD5 key
4 MD5 Yue:tL[+vR)M`n~bY,'? # MD5 key
5 MD5 B;fx'Kgr/&4ZTbL6=RxA # MD5 key
6 MD5 4eYwa`o}3i@@V@..R9!l # MD5 key
7 MD5 `A.([h+;wTQ|xfi%Sn_! # MD5 key
8 MD5 45:V,r4]l6y^JH6"Sh?F # MD5 key
9 MD5 3-5vcn*6l29DS?Xdsg)* # MD5 key
10 MD5 2late4Me # MD5 key
11 SHA1 a27872d3030a9025b8446c751b4551a7629af65c # SHA1 key
12 SHA1 21bc3b4865dbb9e920902abdccb3e04ff97a5e74 # SHA1 key
13 SHA1 2b7736fe24fef5ba85ae11594132ab5d6f6daba9 # SHA1 key
14 SHA a5332809c8878dd3a5b918819108a111509aeceb # SHA key
15 MD2 2fe16c88c760ff2f16d4267e36c1aa6c926e6964 # MD2 key
16 MD4 b2691811dc19cfc0e2f9bcacd74213f29812183d # MD4 key
17 MD5 e4d6735b8bdad58ec5ffcb087300a17f7fef1f7c # MD5 key
18 MDC2 a8d5e2315c025bf3a79174c87fbd10477de2eabc # MDC2 key
19 RIPEMD160 77ca332cafb30e3cafb174dcd5b80ded7ba9b3d2 # RIPEMD160 key
20 AES128CMAC f92ff73eee86c1e7dc638d6489a04e4e555af878 # AES128CMAC key
Figure 1. Typical Symmetric Key File
Figure 1 shows a typical symmetric keys file used by the reference implementation. Following the header
the keys are entered one per line in the format
keyno type key
where keyno is a positive integer in the range 1-65535; type is the key type for the message digest
algorithm, which in the absence of the OpenSSL library must be MD5 to designate the MD5 message digest
algorithm; if the OpenSSL library is installed, the key type can be any message digest algorithm
supported by that library; however, if compatibility with FIPS 140-2 is required, the key type must be
either SHA or SHA1; key is the key itself, which is a printable ASCII string 20 characters or less in
length: each character is chosen from the 93 printable characters in the range 0x21 through 0x7e ( ‘’!
through ‘~’ ) excluding space and the ‘#’ character, and terminated by whitespace or a ‘#’ character. An
OpenSSL key consists of a hex-encoded ASCII string of 40 characters, which is truncated as necessary.
Note that the keys used by the ntpq(1) and ntpdc(1) programs are checked against passwords requested by
the programs and entered by hand, so it is generally appropriate to specify these keys in human readable
ASCII format.
The ntp-keygen program generates a symmetric keys file ntpkey_MD5key_hostname.filestamp. Since the file
contains private shared keys, it should be visible only to root and distributed by secure means to other
subnet hosts. The NTP daemon loads the file ntp.keys, so ntp-keygen installs a soft link from this name
to the generated file. Subsequently, similar soft links must be installed by manual or automated means
on the other subnet hosts. While this file is not used with the Autokey Version 2 protocol, it is needed
to authenticate some remote configuration commands used by the ntpq(1) and ntpdc(1) utilities.
OPTIONS
-b imbits, --imbits=imbits
identity modulus bits. This option takes an integer number as its argument. The value of imbits
is constrained to being:
in the range 256 through 2048
The number of bits in the identity modulus. The default is 256.
-c scheme, --certificate=scheme
certificate scheme.
scheme is one of RSA-MD2, RSA-MD5, RSA-MDC2, RSA-SHA, RSA-SHA1, RSA-RIPEMD160, DSA-SHA, or
DSA-SHA1.
Select the certificate signature encryption/message digest scheme. Note that RSA schemes must be
used with a RSA sign key and DSA schemes must be used with a DSA sign key. The default without
this option is RSA-MD5.
-C cipher, --cipher=cipher
privatekey cipher.
Select the cipher which is used to encrypt the files containing private keys. The default is
three-key triple DES in CBC mode, equivalent to "-C des-ede3-cbc". The openssl tool lists
ciphers available in "openssl -h" output.
-d, --debug-level
Increase debug verbosity level. This option may appear an unlimited number of times.
-D number, --set-debug-level=number
Set the debug verbosity level. This option may appear an unlimited number of times. This option
takes an integer number as its argument.
-e, --id-key
Write IFF or GQ identity keys.
Write the public parameters from the IFF or GQ client keys to the standard output. This is
intended for automatic key distribution by email.
-G, --gq-params
Generate GQ parameters and keys.
Generate parameters and keys for the GQ identification scheme, obsoleting any that may exist.
-H, --host-key
generate RSA host key.
Generate new host keys, obsoleting any that may exist.
-I, --iffkey
generate IFF parameters.
Generate parameters for the IFF identification scheme, obsoleting any that may exist.
-i group, --ident=group
set Autokey group name.
Set the optional Autokey group name to name. This is used in the file name of IFF, GQ, and MV
client parameters files. In that role, the default is the host name if this option is not
provided. The group name, if specified using -i/--ident or using -s/--subject-name following an
'@' character, is also a part of the self-signed host certificate subject and issuer names in the
form host@group and should match the ´crypto ident' or 'server ident' configuration in the ntpd
configuration file.
-l lifetime, --lifetime=lifetime
set certificate lifetime. This option takes an integer number as its argument.
Set the certificate expiration to lifetime days from now.
-m modulus, --modulus=modulus
prime modulus. This option takes an integer number as its argument. The value of modulus is
constrained to being:
in the range 256 through 2048
The number of bits in the prime modulus. The default is 512.
-M, --md5key
generate symmetric keys.
Generate symmetric keys, obsoleting any that may exist.
-P, --pvt-cert
generate PC private certificate.
Generate a private certificate. By default, the program generates public certificates.
-p passwd, --password=passwd
local private password.
Local files containing private data are encrypted with the DES-CBC algorithm and the specified
password. The same password must be specified to the local ntpd via the "crypto pw password"
configuration command. The default password is the local hostname.
-q passwd, --export-passwd=passwd
export IFF or GQ group keys with password.
Export IFF or GQ identity group keys to the standard output, encrypted with the DES-CBC algorithm
and the specified password. The same password must be specified to the remote ntpd via the
"crypto pw password" configuration command. See also the option --id-key (-e) for unencrypted
exports.
-s host@group, --subject-name=host@group
set host and optionally group name.
Set the Autokey host name, and optionally, group name specified following an '@' character. The
host name is used in the file name of generated host and signing certificates, without the group
name. The host name, and if provided, group name are used in host@group form for the host
certificate subject and issuer fields. Specifying '-s @group' is allowed, and results in leaving
the host name unchanged while appending @group to the subject and issuer fields, as with -i
group. The group name, or if not provided, the host name are also used in the file names of IFF,
GQ, and MV client parameter files.
-S sign, --sign-key=sign
generate sign key (RSA or DSA).
Generate a new sign key of the designated type, obsoleting any that may exist. By default, the
program uses the host key as the sign key.
-T, --trusted-cert
trusted certificate (TC scheme).
Generate a trusted certificate. By default, the program generates a non-trusted certificate.
-V num, --mv-params=num
generate <num> MV parameters. This option takes an integer number as its argument.
Generate parameters and keys for the Mu-Varadharajan (MV) identification scheme.
-v num, --mv-keys=num
update <num> MV keys. This option takes an integer number as its argument.
This option has not been fully documented.
-?, --help
Display usage information and exit.
-!, --more-help
Pass the extended usage information through a pager.
-> [cfgfile], --save-opts [=cfgfile]
Save the option state to cfgfile. The default is the last configuration file listed in the
OPTION PRESETS section, below. The command will exit after updating the config file.
-< cfgfile, --load-opts=cfgfile, --no-load-opts
Load options from cfgfile. The no-load-opts form will disable the loading of earlier
config/rc/ini files. --no-load-opts is handled early, out of order.
--version [{v|c|n}]
Output version of program and exit. The default mode is `v', a simple version. The `c' mode
will print copyright information and `n' will print the full copyright notice.
OPTION PRESETS
Any option that is not marked as not presettable may be preset by loading values from configuration ("RC"
or ".INI") file(s) and values from environment variables named:
NTP_KEYGEN_<option-name> or NTP_KEYGEN
The environmental presets take precedence (are processed later than) the configuration files. The homerc
files are "$HOME", and ".". If any of these are directories, then the file .ntprc is searched for within
those directories.
USAGE
ENVIRONMENT
See OPTION PRESETS for configuration environment variables.
FILES
See OPTION PRESETS for configuration files.
EXIT STATUS
One of the following exit values will be returned:
0 (EXIT_SUCCESS)
Successful program execution.
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid.
66 (EX_NOINPUT)
A specified configuration file could not be loaded.
70 (EX_SOFTWARE)
libopts had an internal operational error. Please report it to
autogen-users@lists.sourceforge.net. Thank you.
AUTHORS
The University of Delaware and Network Time Foundation
COPYRIGHT
Copyright (C) 1992-2020 The University of Delaware and Network Time Foundation all rights reserved. This
program is released under the terms of the NTP license, <http://ntp.org/license>.
BUGS
It can take quite a while to generate some cryptographic values.
Please report bugs to http://bugs.ntp.org .
Please send bug reports to: http://bugs.ntp.org, bugs@ntp.org
NOTES
Portions of this document came from FreeBSD.
This manual page was AutoGen-erated from the ntp-keygen option definitions.
Debian June 23 2020 NTP_KEYGEN(8)