NAME

       ip-macsec - MACsec device configuration

SYNOPSIS

       ip  link  add link DEVICE name NAME type macsec [ [ address <lladdr> ] port PORT | sci <u64> ] [ cipher {
       default | gcm-aes-128 | gcm-aes-256"}][" icvlen ICVLEN ] [ encrypt { on | off } ] [ send_sci { on | off }
       ] [ end_station { on | off } ] [ scb { on | off } ] [ protect { on | off } ] [ replay { on | off  }  ]  [
       window  WINDOW ] [ validate { strict | check | disabled } ] [ encodingsa SA ] [ offload { off | phy | mac
       } ]

       ip macsec add DEV tx sa { 0..3 } [ OPTS ] key ID KEY
       ip macsec set DEV tx sa { 0..3 } [ OPTS ]
       ip macsec del DEV tx sa { 0..3 }

       ip macsec add DEV rx SCI [ on | off ]
       ip macsec set DEV rx SCI [ on | off ]
       ip macsec del DEV rx SCI

       ip macsec add DEV rx SCI sa { 0..3 } [ OPTS ] key ID KEY
       ip macsec set DEV rx SCI sa { 0..3 } [ OPTS ]
       ip macsec del DEV rx SCI sa { 0..3 }

       ip macsec offload DEV { off | phy | mac }

       ip macsec show [ DEV ]

       OPTS := [ pn { 1..2^32-1 } ] [ on | off ]
       SCI := { sci <u64> | port PORT address <lladdr> }
       PORT := { 1..2^16-1 }

DESCRIPTION

       The ip macsec commands are used to configure transmit secure associations and receive secure channels and
       their secure associations on a MACsec device created with the ip link add command using the macsec type.

EXAMPLES

   Create a MACsec device on link eth0 (offload is disabled by default)
       # ip link add link eth0 macsec0 type macsec port 11 encrypt on

   Configure a secure association on that device
       # ip macsec add macsec0 tx sa 0 pn 1024 on key 01 81818181818181818181818181818181

   Configure a receive channel
       # ip macsec add macsec0 rx port 1234 address c6:19:52:8f:e6:a0

   Configure a receive association
       # ip macsec add macsec0 rx port 1234 address c6:19:52:8f:e6:a0 sa 0 pn 1 on key 00 82828282828282828282828282828282

   Display MACsec configuration
       # ip macsec show

   Configure offloading on an interface
       # ip macsec offload macsec0 phy

   Configure offloading upon MACsec device creation
       # ip link add link eth0 macsec0 type macsec port 11 encrypt on offload mac

NOTES

       This tool can be used to configure the 802.1AE keys of the interface. Note that 802.1AE uses GCM-AES with
       a initialization vector (IV) derived from the packet number. The same key must not be used with the  same
       IV  more  than  once.  Instead,  keys  must be frequently regenerated and distributed.  This tool is thus
       mostly for debugging and testing, or in combination with a user-space application that  reconfigures  the
       keys.  It  is  wrong  to  just  configure  the  keys statically and assume them to work indefinitely. The
       suggested and standardized way for key management is 802.1X-2010, which is implemented by wpa_supplicant.

SEE ALSO

       ip-link(8) wpa_supplicant(8)

AUTHOR

       Sabrina Dubroca <sd@queasysnail.net>

iproute                                            07 Mar 2016                                      IP-MACSEC(8)