Provided by: inadyn_2.8.1-1_amd64 
NAME
inadyn.conf — inadyn DDNS client configuration file
SYNOPSIS
/etc/inadyn.conf
DESCRIPTION
inadyn is configured using a simple configuration file. The “#” character marks start of a comment to
end of line. The \ character can be used as an escape character.
verify-address = <true | false>
By default inadyn verifies both IPv4 and IPv6 addresses, making sure the address is a valid
Internet address. Invalid addresses are, e.g., link local, loopback, multicast and known
experimental addresses. For more information, see RFC3330.
IP address validation can be disabled by setting this option to false.
fake-address = <true | false>
When using SIGUSR1, to do a forced update, this option can be used to fake an address update with a
“random” address in the 203.0.113.0/24 range, example address range from RFC5737, before updating
with the actual IP address. This is completely outside spec., but can be useful for people who
very rarely, if ever, get an IP address change. Because some DDNS service providers will not
register even a forced update if the IP is the same. As a result the user could be deregistered as
an inactive user.
allow-ipv6 = <true | false>
Inadyn can get an IPv6 address from an interface, or with an external checkip script. This option
controls if IPv6 addresses should be allowed or discarded. By default this option is false, i.e.
IPv6 addresses are discarded.
iface = IFNAME
Use network interface IFNAME as source of IP address changes instead of querying an external
server. With this option is enabled, the external IP check is disabled and inadyn will send DDNS
updates using the IP address of the IFNAME network interface to all DDNS providers listed in the
configuration file. This can be useful to register LAN IP addresses, or, when connected directly
to a public IP address, to speed up the IP check if the DDNS provider's check-ip servers are slow
to respond.
This option can also be given as a command line option to inadyn(8), both serve a purpose, use
whichever one works for you.
iterations = <NUM | 0>
Set the number of DNS updates. The default is 0, which means infinity.
period = SEC
How often the IP is checked, in seconds. Default: apxrox. 1 minute. Max: 10 days.
forced-update = SEC
How often the IP should be updated even if it is not changed. The time should be given in seconds.
Default is equal to 30 days.
secure-ssl = < true | false >
If the HTTPS certificate validation fails for a provider inadyn aborts the DDNS update before
sending any credentials. When this setting is disabled, i.e. false, then inadyn will only issue a
warning. By default this setting is enabled, because security matters.
broken-rtc = < true | false >
HTTPS certificates are only valid within specified time windows, so on systems without hardware
real-time clock and default bootup time far in the past, false-positive validation fail is
expected. When this setting is enabled, i.e. true, then inadyn will only issue a warning that the
certificate is not valid yet. By default this setting is disabled, because security matters.
ca-trust-file = FILE
By default inadyn uses the built-in path to the system's trusted CA certificates, both GnuTLS and
Open/LibreSSL support this. As a fall-back, in case the API's to load CA certificates from the
built-in path fails, inadyn also supports common default paths to Debian and RedHat CA bundles.
This setting overrides the built-in paths and fallback locations and provides a way to specify the
path to a trusted set of CA certificates, in PEM format, bundled into one file.
user-agent = STRING
Specify the User-Agent string to send to the DDNS provider on checkip and update requests. Some
providers require this field to be set to a specific string, some may be OK with "Mozilla/4.0".
The default is to send "inadyn/VERSION SUPPORTURL", where VERSION is the current inadyn version,
and SUPPORTURL is the upstream support URL.
This can also be set on a per-provider basis, see below custom and provider section description.
custom some@identifier {}
The custom{} and provider{} sections are very similar, except that the custom section allows
customizing the DDNS update server details. For more details, see the description for provider{},
below.
provider email@ddns-service.tld[:ID] {}
The custom{} and provider{} sections are very similar, except that the custom section allows
customizing the DDNS update server details. See below list for supported DDNS providers and their
email@ddns-service.tld identifiers.
To support multiple users of the same DDNS provider, append [:ID] to the provider name. The ID can
be any free form string or number as long as the combination is unique.
Common settings in custom{} and provider{} sections are:
ssl = <true | false>
Use HTTPS, both when checking for IP changes and updating the DNS record. Default is to use
HTTPS (true).
username = USERNAME.
The username, if applicable. This might be referred to as hash by some providers.
password = PASSWORD
The password, if applicable.
checkip-server = <default | checkip.example.com[:port]>
This setting allows you to override the default checkip server with either the string
default, to use In-a-dyn's built-in default, api.ipify.org, or the complete name of the
server to use for periodic IP address changes. The optional port argument defaults to 80.
This is an optional setting. For provider{} sections it defaults to a pre-defined
checkip-server and checkip-path for the given DDNS provider. For custom DDNS setups it
defaults to api.ipify.org, which is a really great and free service that even support HTTPS,
see checkip-ssl setting, below. When set in a provider{} section it overrides the provider's
default checkip-server.
checkip-path = /some/checkip/url
Optional server path for check IP server, defaults to "/". When the checkip-server is set to
default, this setting is ignored.
checkip-ssl = <true | false>
This setting usually follows the ssl setting, but can be used to disable HTTPS for the IP
address check. This might be needed for some providers that only support HTTPS for the DNS
record update.
However, when a custom checkip-server is defined for a provider, this setting does not follow
the ssl setting. Default is to use HTTPS (true).
checkip-command = /path/to/shell/command [optional args]
Shell command, or script, for IP address update checking. The command must output a text
with the IP address to its standard output. The following environment variables are set:
INADYN_PROVIDER
contains the DDNS provider's full name in form email@ddns-service.tld
INADYN_USER
contains user's name
Example:
checkip-command = "/sbin/ifconfig eth0 | grep 'inet addr'"
Inadyn will use the first occurrence in the command's output that looks like an address.
Both IPv4 and IPv6 addresses are supported.
hostname = HOSTNAME
hostname = { HOSTNAME1.name.tld, HOSTNAME2.name.tld }
Your hostname alias. To list multiple names, use the second form.
user-agent = STRING
Same as the global setting, but only for this provider. If omitted it defaults to the global
setting, which if unset uses the default inadyn user agent string. For more information, see
above.
wildcard = <true | false>
Enable domain name wildcarding of your domain name, for DDNS providers that support this,
e.g. easydns.com and loopia.com. This means that anything typed before your hostname, e.g.
www. or ftp., is also updated when your IP changes. Default: disabled. For inadyn < 1.96.3
wildcarding was enabled by default.
ttl = SEC
Time to live of your domain name. Only works with supported DDNS providers, e.g.
cloudflare.com.
proxied = <true | false>
Proxy DNS origin via provider's CDN network. Only works with supported DDNS providers, e.g.
cloudflare.com. Default: false
provider [email@]ddns-service[.tld] {}
Either a unique substring matching the provider, or or one of the exact matches to the following
unique provider names:
default@freedns.afraid.org
⟨https://freedns.afraid.org⟩
ipv4@nsupdate.info
⟨https://nsupdate.info⟩
default@duckdns.org
⟨https://duckdns.org⟩
default@freemyip.com
⟨https://freemyip.com⟩
default@loopia.com
⟨https://www.loopia.com⟩
default@dyndns.org
Connect to ⟨https://www.dyndns.org⟩, i.e., ⟨https://dyn.com⟩
default@noip.com
⟨https://www.noip.com⟩
default@no-ip.com
Handled by default@noip.com plugin.
default@easydns.com
⟨https://www.easydns.com⟩
default@dnsomatic.com
⟨https://www.dnsomatic.com⟩
dyndns@he.net
⟨https://dns.he.net⟩
default@tunnelbroker.net
IPv6 ⟨https://www.tunnelbroker.net⟩ by Hurricane Electric.
default@sitelutions.com
⟨https://www.sitelutions.com⟩
default@dnsexit.com
⟨https://www.dnsexit.com⟩
default@zoneedit.com
⟨https://zoneedit.com⟩
default@changeip.com
⟨https://www.changeip.com⟩
default@dhis.org
⟨https://www.dhis.org⟩
default@domains.google.com
⟨https://domains.google⟩
default@ovh.com
⟨https://www.ovh.com⟩
default@gira.de
⟨https://giradns.com⟩
default@duiadns.net
⟨https://www.duiadns.net⟩
default@ddnss.de
⟨https://ddnss.de⟩
default@dynv6.com
⟨https://dynv6.com⟩
default@ipv4.dynv6.com
⟨https://ipv4.dynv6.com⟩
default@spdyn.de
⟨https://spdyn.de⟩
default@strato.com
⟨https://www.strato.com⟩
default@cloudxns.net
⟨https://www.cloudxns.net⟩
dyndns@3322.org
⟨https://www.3322.org⟩
default@dnspod.cn
⟨https://www.dnspod.cn⟩
default@dynu.com
⟨https://www.dynu.com⟩
default@selfhost.de
⟨https://www.selfhost.de⟩
default@pdd.yandex.ru
⟨https://connect.yandex.ru⟩
default@cloudflare.com
⟨https://www.cloudflare.com⟩
custom some@identifier {}
Specific to the custom provider section are the following settings:
ddns-server = update.example.com
DDNS server name, not the full URL.
ddns-path = /update?domain=
DDNS server path. By default the hostname is appended to the path, unless append-myip=true
is set. Alternatively, printf(3) like format specifiers may be used for a fully customizable
HTTP GET update request. The following format specifiers are currently supported:
%u username
%p password, if HTTP basic auth is not used
%h hostname
%i IP address
With the following example:
username = myuser
password = mypass
ddns-path = "/update?user=%u&password=%p&domain=%h&myip=%i"
hostname = YOURDOMAIN.TLD
the resulting update URL would be expanded to
/update?user=myuser&password=mypass&domain=YOURDOMAIN.TLD&myip=1.2.3.4
However, the password is usually never sent in clear text in the HTTP GET URL. Most DDNS
providers instead rely on HTTP basic auth., which inadyn always relays to the server in the
HTTP header of update requests. inadyn.conf v2.1 and later defaults to HTTPS to protect your
credentials, but some providers still do not support HTTPS.
append-myip = true
Append your current IP to the the DDNS server update path. By default this setting is false
and the hostname is appended. Unless the ddns-path is given with format specifiers, in which
case this setting is unused.
EXAMPLES
Worth noting below is how two different user accounts can use the same DDNS provider, No-IP.com, by using
the concept of instances ':N'.
period = 300
# Dyn.com
provider dyndns.org {
username = account1
password = secret1
hostname = { "my.example.com", "other.example.org" }
}
# FreeDNS. Remember the username must be in lower case
# and password (max 16 chars) is case sensitive.
provider freedns {
username = lower-case-username
password = case-sensitive-pwd
hostname = some.example.com
}
# No-IP.com #1
provider no-ip.com:1 {
checkip-server = "dynamic.zoneedit.com"
checkip-path = "/checkip.html"
checkip-ssl = false
username = account21
password = secret21
hostname = example.no-ip.com
}
# No-IP.com #2
provider no-ip.com:2 {
username = account22
password = secret22
hostname = another.no-ip.com
}
# Google Domains - notice use of '@' to update root entry
provider domains.google.com {
hostname = @.mydomain.com
username = your_username
password = your_password
}
# Loopia
provider loopia.com {
wildcard = true
username = account3
password = secret3
hostname = example.com
}
# ddnss.de
provider ddnss.de {
username = your_username
password = your_password
hostname = your_host.ddnss.de
}
# spdyn.de
provider spdyn.de {
username = your_username
password = your_password
hostname = your_host.spdyn.de
}
# www.strato.com
provider strato.com {
username = your_username
password = your_password
hostname = example.com
}
# dynv6.com
provider dynv6.com {
username = your_token
password = not_used
hostname = your_host.dynv6.net
}
# IPv6 account at https://tunnelbroker.net
provider tunnelbroker.net {
username = xyzzy
password = update-key-in-advanced-tab
hostname = tunnel-id
}
# www.freemyip.com
provider freemyip.com {
password = your_token
hostname = your_hostname.freemyip.com
}
# www.cloudxns.net
provider cloudxns.net {
username = your_api_key
password = your_secret_key
hostname = yourhost.example.com
}
# www.dnspod.cn
provider dnspod.cn {
username = your_api_id
password = your_api_token
hostname = yourhost.example.com
}
# www.cloudflare.com
provider cloudflare.com {
username = zone.name
password = api_token # Create a unique custom api token with the following permissions: Zone.Zone - Read, Zone.DNS - Edit.
hostname = hostname.zone.name
ttl = 1 # optional, value of 1 is 'automatic'.
proxied = false # optional.
}
# Generic example, check all details for your provider!
custom example {
username = myuser
password = mypass
checkip-server = checkip.example.com
checkip-path = /
checkip-ssl = false
ddns-server = update.example.com
ddns-path = "/update?hostname="
hostname = myhostname.example.net
}
As of Inadyn 1.99.14 the generic plugin can also be used with providers that require the client's IP in
the update request, which for example ⟨https://dyn.com⟩ requires:
# This emulates dyndns.org
custom dyn.com {
username = DYNUSERNAME
password = DYNPASSWORD
ddns-server = members.dyndns.org
ddns-path = "/nic/update?hostname=YOURHOST.dyndns.org&myip="
append-myip = true
hostname = YOURHOST
}
Notice the use of append-myip which differs from above previous examples. Without this option set the
default (backwards compatible) behavior is to append the hostname.
An alternative, and perhaps more intuitive approach introduced in Inadyn v2.0, is to use the printf(3)
like format specifiers mentioned previously. The same example look like this:
# This emulates dyndns.org
custom dyn.com {
ssl = false
username = DYNUSERNAME
password = DYNPASSWORD
ddns-server = members.dyndns.org
ddns-path = "/nic/update?hostname=%h.dyndns.org&myip=%i"
hostname = YOURHOST
}
SEE ALSO
inadyn(8)
The inadyn home page is ⟨https://github.com/troglobit/inadyn⟩
AUTHORS
This manual page was initially written for the Debian GNU/Linux system by Shaul Karl
<mailto:shaul@debian.org>. Currently maintained by Joachim Nilsson <mailto:troglobit@gmail.com>.
Debian February 20, 2020 INADYN(5)