Provided by: libnet-idn-encode-perl_2.500-2build1_amd64 
NAME
Net::IDN::Encode - Internationalizing Domain Names in Applications (IDNA)
SYNOPSIS
use Net::IDN::Encode ':all';
my $a = domain_to_ascii("mueller.example.org");
my $e = email_to_ascii("POSTMASTER@XXXXX");
my $u = domain_to_unicode('EXAMPLE.XN--11B5BS3A9AJ6G');
DESCRIPTION
This module provides an easy-to-use interface for encoding and decoding Internationalized Domain Names
(IDNs).
IDNs use characters drawn from a large repertoire (Unicode), but IDNA allows the non-ASCII characters to
be represented using only the ASCII characters already allowed in so-called host names today (letter-
digit-hyphen, "/[A-Z0-9-]/i").
Use this module if you just want to convert domain names (or email addresses), using whatever IDNA
standard is the best choice at the moment.
You should be familiar with Unicode support in perl, as this module expects correctly encoded input. See
perlunitut, perluniintro and perlunicode for details.
UNICODE VERSION
To convert labels correctly between Unicode and ASCII, each character in the label must be present in the
Unicode version supported by your perl. Consequently, this module will refuse to convert labels with new
Unicode characters on older perl versions (see below).
FUNCTIONS
By default, this module does not export any subroutines. You may use the ":all" tag to import everything.
You can also use regular expressions such as "/^to_/" or "/^email_/" to select some of the functions, see
Exporter for details.
The following functions are available:
to_ascii( $label, %param )
Converts a single label $label to ASCII. Will throw an exception on invalid input. If $label is
already a valid ASCII domain label (including most NON-LDH labels such as those used for SRV records
and fake A-labels), this function will never fail but return $label as-is if conversion would fail.
This function takes the following optional parameters (%param):
AllowUnassigned
(boolean) If set to a true value, code points that are unassigned in the Unicode version
supported by your perl are allowed. This is an extension over UTS #46.
While this increases the number of labels that can be converted successfully (especially on older
perls) and may thus maximizes the compatibility with domain names created under future versions
of Unicode, it also introduces the risk of incorrect conversions. Characters added in later
versions of Unicode might have properties that affect the conversion; if these properties are not
known on your version of perl, you might therefore end up with an incorrect conversion.
The default is false.
UseSTD3ASCIIRules
(boolean) If set to a true value, checks the label for compliance with STD 3 (RFC 1123) syntax
for host name parts. The exact checks done depend on the IDNA standard used. Usually, you will
want to set this to true.
Please note that UseSTD3ASCIIRules only affects the conversion between ASCII labels (A-labels)
and Unicode labels (U-labels). Labels that are in ASCII may still be passed-through as-is.
For historical reasons, the default is false (unlike "domain_to_ascii").
TransitionalProcessing
(boolean) If set to true, the conversion will be compatible with IDNA2003. This only affects four
characters: 'ss' (U+00DF), 'X' (U+03C2), ZWJ (U+200D) and ZWNJ (U+200C). Usually, you will want
to set this to false.
The default is false.
This function does not handle strings that consist of multiple labels (such as domain names). Use
"domain_to_ascii" instead.
to_unicode( $label, %param )
Converts a single label $label to Unicode. Will throw an exception on invalid input. If $label is an
ASCII label (including most NON-LDH labels such as those used for SRV records), this function will
not fail but return $label as-is if conversion would fail.
This function takes the same optional parameters as "to_ascii", with the same defaults.
If $label is already in ASCII, this function will never fail but return $label as is as a last resort
(i.e. pass-through).
This function takes the following optional parameters (%param):
AllowUnassigned
UseSTD3ASCIIRules
See "to_unicode" above. Please note that there is no need for "TransitionalProcessing" for
"to_unicode".
This function does not handle strings that consist of multiple labels (such as domain names). Use
"domain_to_unicode" instead.
domain_to_ascii( $label, %param )
Converts all labels of the hostname $domain (with labels separated by dots) to ASCII (using
"to_ascii"). Will throw an exception on invalid input.
This function takes the following optional parameters (%param):
AllowUnassigned
TransitionalProcessing
See "to_unicode" above.
UseSTD3ASCIIRules
(boolean) If set to a true value, checks the label for compliance with STD 3 (RFC 1123) syntax
for host name parts.
The default is true (unlike "to_ascii").
This function will convert all dots to ASCII, i.e. to U+002E (full stop). The following characters
are recognized as dots: U+002E (full stop), U+3002 (ideographic full stop), U+FF0E (fullwidth full
stop), U+FF61 (halfwidth ideographic full stop).
domain_to_unicode( $domain, %param )
Converts all labels of the hostname $domain (with labels separated by dots) to Unicode. Will throw an
exception on invalid input.
This function takes the same optional parameters as "domain_to_ascii", with the same defaults.
This function takes the following optional parameters (%param):
AllowUnassigned
UseSTD3ASCIIRules
See "domain_to_unicode" above. Please note that there is no "TransitionalProcessing" for
"domain_to_unicode".
This function will preserve the original version of dots. The following characters are recognized as
dots: U+002E (full stop), U+3002 (ideographic full stop), U+FF0E (fullwidth full stop), U+FF61
(halfwidth ideographic full stop).
email_to_ascii( $email, %param )
Converts the domain part (right hand side, separated by an at sign) of an RFC 2821/2822 email address
to ASCII, using "domain_to_ascii". May throw an exception on invalid input.
It takes the same parameters as "domain_to_ascii".
This function currently does not handle internationalization of the local-part (left hand side).
Future versions of this module might implement an ASCII conversion for the local-part, should one be
standardized.
This function will convert the at sign to ASCII, i.e. to U+0040 (commercial at), as well as label
separators. The following characters are recognized as at signs: U+0040 (commercial at), U+FE6B
(small commercial at) and U+FF20 (fullwidth commercial at).
email_to_unicode( $email, %param )
Converts the domain part (right hand side, separated by an at sign) of an RFC 2821/2822 email address
to Unicode, using "domain_to_unicode". May throw an exception on invalid input.
It takes the same parameters as "domain_to_unicode".
This function currently does not handle internationalization of the local-part (left hand side).
Future versions of this module might implement a conversion from ASCII for the local-part, should one
be standardized.
This function will preserve the original version of at signs (and label separators). The following
characters are recognized as at signs: U+0040 (commercial at), U+FE6B (small commercial at) and
U+FF20 (fullwidth commercial at).
AUTHOR
Claus Faerber <CFAERBER@cpan.org>
LICENSE
Copyright 2007-2014 Claus Faerber.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
SEE ALSO
Net::IDN::Punycode, Net::IDN::UTS46, Net::IDN::IDNA2003, Net::IDN::IDNA2008, UTS #46
(<http://www.unicode.org/reports/tr46/>), RFC 5890 (<http://tools.ietf.org/html/rfc5890>).
perl v5.34.0 2022-02-06 Net::IDN::Encode(3pm)