Ubuntu Manpage: Locale::Po4a::TeX - convert TeX documents and derivatives from/to PO files

NAME

       Locale::Po4a::TeX - convert TeX documents and derivatives from/to PO files

DESCRIPTION

       The po4a (PO for anything) project goal is to ease translations (and more interestingly, the maintenance
       of translations) using gettext tools on areas where they were not expected like documentation.

       Locale::Po4a::TeX is a module to help the translation of TeX documents into other [human] languages. It
       can also be used as a base to build modules for TeX-based documents.

       Users should probably use the LaTeX module, which inherits from the TeX module and contains the
       definitions of common LaTeX commands.

TRANSLATING WITH PO4A::TEX

       This module can be used directly to handle generic TeX documents.  This will split your document in
       smaller blocks (paragraphs, verbatim blocks, or even smaller like titles or indexes).

       There are some options (described in the next section) that can customize this behavior.  If this doesn't
       fit to your document format you're encouraged to write your own derivative module from this, to describe
       your format's details.  See the section WRITING DERIVATIVE MODULES below, for the process description.

       This module can also be customized by lines starting with "% po4a:" in the TeX file. This process is
       described in the INLINE CUSTOMIZATION section.

OPTIONS ACCEPTED BY THIS MODULE

       These are this module's particular options:

       debug
           Activate  debugging  for  some internal mechanisms of this module.  Use the source to see which parts
           can be debugged.

       no_wrap
           Comma-separated list of environments which should not be re-wrapped.

           Note that there is a difference between verbatim and no_wrap environments.  There is no  command  and
           comments analysis in verbatim blocks.

           If  this  environment  was  not already registered, po4a will consider that this environment does not
           take any parameters.

       exclude_include
           Colon-separated list of files that should not be included by \input and \include.

       definitions
           The name of a file containing definitions for po4a, as defined in the INLINE  CUSTOMIZATION  section.
           You  can  use  this  option  if  it  is  not  possible  to  put the definitions in the document being
           translated.

       verbatim
           Comma-separated list of environments which should be taken as verbatim.

           If this environment was not already registered, po4a will consider that  this  environment  does  not
           take any parameters.

       Using these options permits to override the behaviour of the commands defined in the default lists.

INLINE CUSTOMIZATION

The TeX module can be customized with lines starting by % po4a:. These lines are interpreted as commands
to the parser. The following commands are recognized:

% po4a: command command1 alias command2
Indicates that the arguments of the command1 command should be treated as the arguments of the
command2 command.

% po4a: command command1 parameters
This permit to describe in detail the parameters of the command1 command. This information will be
used to check the number of arguments and their types.

You can precede the command1 command by

an asterisk (*)
po4a will extract this command from paragraphs (if it is located at the beginning or the end of a
paragraph). The translators will then have to translate the parameters that are marked as
translatable.

a plus (+)
As for an asterisk, the command will be extracted if it appear at an extremity of a block, but
the parameters won't be translated separately. The translator will have to translate the command
concatenated to all its parameters. This permits to keep more context, and is useful for
commands with small words in parameter, which can have multiple meanings (and translations).

Note: In this case you don't have to specify which parameters are translatable, but po4a must
know the type and number of parameters.

a minus (-)
In this case, the command won't be extracted from any block. But if it appears alone on a block,
then only the parameters marked as translatable will be presented to the translator. This is
useful for font commands. These commands should generally not be separated from their paragraph
(to keep the context), but there is no reason to annoy the translator with them if a whole string
is enclosed in such a command.

The parameters argument is a set of [] (to indicate an optional argument) or {} (to indicate a
mandatory argument). You can place an underscore (_) between these brackets to indicate that the
parameter must be translated. For example:
% po4a: command *chapter [_]{_}

This indicates that the chapter command has two parameters: an optional (short title) and a mandatory
one, which must both be translated. If you want to specify that the href command has two mandatory
parameters, that you don't want to translate the URL (first parameter), and that you don't want this
command to be separated from its paragraph (which allow the translator to move the link in the
sentence), you can use:
% po4a: command -href {}{_}

In this case, the information indicating which arguments must be translated is only used if a
paragraph is only composed of this href command.

% po4a: environment env parameters
This permits to define the parameters accepted by the env environment. This information is later
used to check the number of arguments of the \begin command, and permit to specify which one must be
translated. The syntax of the parameters argument is the same as described for the others commands.
The first parameter of the \begin command is the name of the environment. This parameter must not be
specified in the list of parameters. Here are some examples:
% po4a: environment multicols {}
% po4a: environment equation

As for the commands, env can be preceded by a plus (+) to indicate that the \begin command must be
translated with all its arguments.

% po4a: separator env "regex"
Indicates that an environment should be split according to the given regular expression.

The regular expression is delimited by quotes. It should not create any backreference. You should
use (?:) if you need a group. It may also need some escapes.

For example, the LaTeX module uses the "(?:&|\\\\)" regular expression to translate separately each
cell of a table (lines are separated by '\\' and cells by '&').

The notion of environment is expanded to the type displayed in the PO file. This can be used to
split on "\\\\" in the first mandatory argument of the title command. In this case, the environment
is title{#1}.

% po4a: verbatim environment env
Indicate that env is a verbatim environment. Comments and commands will be ignored in this
environment.

If this environment was not already registered, po4a will consider that this environment does not
take any parameters.

WRITING DERIVATE MODULES

       pre_trans
       post_trans
       add_comment
           Add  a  string as a comment to be added around the next translated element.  This is mostly useful to
           the texinfo module, as comments are automatically handled in TeX.

       translate
           Wrapper around Transtractor's translate, with pre- and post-processing filters.

           Comments of a paragraph are inserted as a  PO  comment  for  the  first  translated  string  of  this
           paragraph.

       get_leading_command($buffer)
           This function returns:

           A command name
               If  no  command  is  found at the beginning of the given buffer, this string will be empty.  Only
               commands that can be separated are considered.  The %separated_command hash contains the list  of
               these commands.

           A variant
               This  indicates  if  a  variant is used.  For example, an asterisk (*) can be added at the end of
               sections command to specify that they should not be numbered.  In  this  case,  this  field  will
               contain "*".  If there is no variant, the field is an empty string.

           An array of tuples (type of argument, argument)
               The type of argument can be either '{' (for mandatory arguments) or '[' (for optional arguments).

           The remaining buffer
               The  rest  of  the  buffer  after  the  removal of this leading command and its arguments.  If no
               command is found, the original buffer is not touched and returned in this field.

       get_trailing_command($buffer)
           The same as get_leading_command, but for commands at the end of a buffer.

       translate_buffer
           Recursively translate a buffer by separating leading and trailing commands  (those  which  should  be
           translated separately) from the buffer.

           If  a function is defined in %translate_buffer_env for the current environment, this function will be
           used to translate the buffer instead of translate_buffer().

       read
           Overloads Transtractor's read().

       read_file
           Recursively read a file, appending included files which are not listed in the @exclude_include array.
           Included files are searched using the kpsewhich command from the Kpathsea library.

           Except from the file inclusion part, it is a cut and paste from Transtractor's read.

       parse_definition_file
           Subroutine for parsing a file with po4a directives (definitions for new commands).

       parse_definition_line
           Parse a definition line of the form "% po4a: ".

           See the INLINE CUSTOMIZATION section for more details.

       is_closed
       parse
       docheader

INTERNAL FUNCTIONS used to write derivative parsers

       Command and environment functions take the following arguments (in addition to the $self object):

       A command name
       A variant
       An array of (type, argument) tuples
       The current environment

       The first 3 arguments are extracted by get_leading_command or get_trailing_command.

       Command and environment functions return the translation of the command with  its  arguments  and  a  new
       environment.

       Environment  functions are called when a \begin command is found. They are called with the \begin command
       and its arguments.

       The TeX module only proposes one command function  and  one  environment  function:  generic_command  and
       generic_environment.

       generic_command uses the information specified by register_generic_command or by adding definition to the
       TeX file:
        % po4a: command command1 parameters

       generic_environment   uses  the  information  specified  by  register_generic_environment  or  by  adding
       definition to the TeX file:
        % po4a: environment env parameters

       Both functions will only translate the parameters that were  specified  as  translatable  (with  a  '_').
       generic_environment  will append the name of the environment to the environment stack and generic_command
       will append the name of the command followed by an identifier of the parameter (like {#7} or [#2]).

STATUS OF THIS MODULE

       This module needs more tests.

       It was tested on a book and with the Python documentation.

TODO LIST

       Automatic detection of new commands
           The TeX module could parse the newcommand arguments and try to guess the number of  arguments,  their
           type and whether or not they should be translated.

       Translation of the environment separator
           When  \item  is  used  as  an  environment  separator, the item argument is attached to the following
           string.

       Some commands should be added to the environment stack
           These commands should be specified by couples.  This could allow to  specify  commands  beginning  or
           ending a verbatim environment.

       Others
           Various other points are tagged TODO in the source.

KNOWN BUGS

       Various points are tagged FIXME in the source.

AUTHORS

        Nicolas François <nicolas.francois@centraliens.net>

COPYRIGHT AND LICENSE

       Copyright © 2004, 2005 Nicolas FRANÇOIS <nicolas.francois@centraliens.net>.

       This  program  is free software; you may redistribute it and/or modify it under the terms of GPL (see the
       COPYING file).

Po4a Tools                                         2022-01-02                             Locale::Po4a::TeX(3pm)