Provided by: pdf-presenter-console_4.5.0-3_amd64 
NAME
pdfpc - PDF presenter console with multi-monitor support
SYNOPSIS
pdfpc [options] PDF-file
DESCRIPTION
pdfpc is a GTK-based presentation viewer which uses Keynote-like multi-monitor output to provide meta
information to the speaker during the presentation. It is able to show a normal presentation window on
one screen while showing a more sophisticated overview on the other one, providing information like a
picture of the next slide, as well as the time left in the presentation. pdfpc processes PDF documents,
which can be created using nearly all modern presentation software.
By default the presenter view appears in the primary monitor and the presentation view in the second
monitor (provided you have two monitors).
OPTIONS
-B, --list-bindings
List action bindings defined
-C, --time-of-day
Display the time of the day
-d, --duration=N
Duration in minutes of the presentation used for timer display. If not given or if a value of 0 is
specified, the clock just measures the time in the presentation.
-e, --end-time=T
End time of the presentation. (Format: HH:MM (24h))
-f, --note-format=FORMAT
Enforce format of notes (plain or markdown. Default: markdown)
-g, --disable-auto-grouping
Disable auto detection of overlay groups. (Default: enabled)
-h, --help
Show this help
-l, --last-minutes=N
In the old timer mode (see Timer below), defines time in minutes before the end of the talk when
the timer changes its color. (Default: 5 minutes)
-L, --list-actions
List actions supported
-M, --list-monitors
List monitors known to the operating system
-n, --notes=P
Position of second-screen beamer notes on the PDF page (left, right, top, bottom, or none.
Default: none). Note that this disables slide auto-grouping.
-N, --no-install
Allow for testing pdfpc without proper installation. Icons, configuration files, etc. will be
loaded from the source path locations. Mostly intended for developers.
-P, --page
Go to a specific page directly after startup. In case of overlays, the first slide will be
displayed.
-r, --page-transition=TRANSITION
Set default page transition. The TRANSITION specification is of the form
type:duration:angle:alignment:direction. See the Page transitions section for the list of
supported types. duration is in seconds. The three last settings are optional (and indeed
meaningless for some of the transition types). The accepted values for angle are 0/90/180/270;
alignment can be h[orizontal] of v[ertical] and direction i[nward] or o[utward].
-R, --pdfpc-location=LOCATION
Use custom pdfpc file.
-s, --switch-screens
Switch the presentation and the presenter screen.
-S, --single-screen
Force to use only one screen
-t, --start-time=T
Start time of the presentation to be used as a countdown. (Format: HH:MM (24h))
-T, --enable-auto-srt-load
Try loading video subtitle files automatically. For each video media, pdfpc will append ".srt" to
the media URI and attempt to load a subtitle file (in the SRT format) from that location.
-W, --wayland-workaround
Enable Wayland-specific workaround. This might fix HiDPI scaling problems.
-w, --windowed=MODE
Run in the given windowed mode (presenter|presentation|both|none). The default mode is "none"
(both windows are fullscreen).
-X, --external-script=FILENAME
Specify a script to be executed with the 'X' (Shift+x) key during the presentation. The script
must be executable but can otherwise be written in any language. The script is called with the
following command line arguments:
• Name of pdf file
• Total slide count
• Current slide number
• Current user slide number
If the script exits with a non-zero return value, whatever the script wrote to stdout is printed
in the console. Otherwise nothing is printed.
-Z, --size
Size of the presentation window in width:height format (forces windowed mode)
-1, --presenter-screen=MONITOR
Monitor to be used for the presenter screen (see the -M option).
-2, --presentation-screen=MONITOR
Monitor to be used for the presentation screen (see the -M option).
KEYBINDINGS
These are the default keybindings for pdfpc:
Right cursor key / Down cursor key / Page down / Return / Space / 1st mouse button / Mouse wheel down
Go forward one slide
Left cursor key / Up cursor key / Page up / Backspace / 3rd mouse button / Mouse wheel up
Go back one slide
Shift + Page down
Go forward one user slide (see Overlays below)
Shift + Page up
Go back one user slide (see Overlays below)
Shift + Right cursor key / 1st mouse button / Mouse wheel down
Go forward 10 slides
Shift + Left cursor key / 3rd mouse button / Mouse wheel up
Go back 10 slides
Home Go to the first slide
End Go to the last slide
Shift + Backspace / Shift + Space
Go back /forward in history.
Shift + Home / Shift + End
Go to the previous / next slide, skipping over overlays that have already been viewed, but at most
one user slide.
Tab / 2nd mouse button
Overview mode
g Input a slide number to jump to
m Bookmark the current slide and store it in the .pdfpc file for later usage
Shift + m
Load the bookmarked slide which was saved with m before
t Toggle the toolbox
1 / KP_1
Switch to the normal mode (pen/eraser and pointer are off)
2 / KP_2
Switch the pointer mode on
3 / KP_3
Switch the pen drawing mode on
4 / KP_4
Switch the eraser drawing mode on
Plus / KP_Add / Equal
Depending on the current mode, increase font size of notes or pointer size or the size of pen or
eraser
Minus / KP_Subtract
Depending on the current mode, decrease font size of notes or pointer size or the size of pen or
eraser
c Clear the drawing on the current page
d Toggle visibility of the drawings; if in the drawing mode (pen/eraser), exit it
f Freeze the current presentation display (the presenter display is still fully active)
w Toggle between the fullscreen and windowed mode of the presenter screen
b Turn off the presentation view (i.e. fill it with a black color)
h Hide the presentation window (i.e. make other windows on the other screen visible)
Escape Exit any "special" state (pause, freeze, blank)
Ctrl + n
Edit notes for the current slide (press Escape to exit this mode)
s Start timer
p Pause timer
Ctrl + t
Reset timer
Ctrl + o
Toggle the overlay flag for one particular slide (see Overlays below)
Ctrl + e
Define end slide
Ctrl + r
Reload the presentation (e.g., if the PDF file has been updated)
Ctrl + q
Exit pdfpc
? Show a cheat sheet with the keyboard and mouse bindings; press Escape or Return to exit it
Within the overview mode, the following key bindings are used:
Return / 1st mouse button
Go to currently selected page (last page of overlay)
Shift + Return / Shift + 1st mouse button
Go to currently selected page (first page of overlay)
Cursor left / Page up
Select previous slide
Cursor right / Page down
Select next slide
See pdfpcrc(5) if you want to customize the key or mouse bindings. Please note though, that only in the
normal mode the mouse bindings are configurable.
FEATURES
Caching / Pre-rendering
To allow fast changes between the presentation slides, the PDF pages are pre-rendered to memory. The
progress bar on the bottom of the presenter screen indicates how many percent of the slides have been
pre-rendered already. During the initial rendering phase this will slow down slide changes, as most CPU
power is used for the rendering process in the background. After the cache is fully primed, however, the
changing of slides should be much faster, as with normal PDF viewers.
To avoid excessive memory consumption, cached are only slides that took a significant time to render;
this threshold is configurable. In order to further reduce memory consumption, the pre-rendered and
cached slides are selectively compressed in memory. The compression factor is typically 10-30, however,
it takes some CPU time to compress and uncompress, so there is a trade-off. Small images below a certain
(configurable) threshold will not be compressed.
Please refer to the pdfpcrc(5) man page for options to fine tune the caching algorithm.
Timer
If a duration is given (-d option), the timer will show a countdown with the given parameters. If no
duration is specified (or if a value of 0 is given to the -d option), the timer will show how much time
has been spent. The duration is stored automatically, so you do not need to repeat it for every
invocation.
The timer is started if you are navigating away from the first page for the first time. This feature is
quite useful as you may want to show the title page of your presentation while people are still entering
the room and the presentation has not really begun yet. If you want to start over you can use the 'Ctrl
+ t' key which will make the presenter reset the timer.
If a duration is given, the timer also provides hints aiding the presenter to judge whether the talk
would end on time. There are two modes in which pdfpc can operate. In the old (and the only one
available up to, and including pdfpc-4.0.8) mode, at the moment the timer reaches the defined last-
minutes value it will change color to indicate your talk is nearing its end, thus mimicking a chairman
frantically pantomiming in front of you with five (four, three, ...) fingers up. A drawback of this
approach is it is often too late at that moment to alter the presentation pace without ruining to some
extent the rest of the talk. On the other hand, the warning indication provides an unnecessary
distraction if you have been perfectly conveying the talk and the remaining time is adequate.
Contrary to that, in the new (default) mode, pdfpc tracks your progress continuously, calculating the
expected time as (talk_duration)*(current_user_slide_number - 0.5)/(total_number_of_user_slides) and
comparing it to the actual wall time since beginning of the talk. If these two numbers differ by more
than 60 seconds, the timer changes its color to either orange (indicating you need to speed up) or a
blueish one (need to slow down). Once the optimal progress is recovered, the timer becomes white again.
In this mode, the last-minutes option (-l) has no effect. The previous behavior can be restored by
setting the 'timer-pace-color' option to 'false' in the configuration file, see pdfpcrc(5).
In any case as soon as the timer reaches the zero mark (00:00:00), it will turn red and count further
down showing a negative time, to provide information on how many minutes you are overtime.
Notes
Textual notes can be displayed for each slide. pdfpc understands the Markdown syntax, which allows for
rendering anything from plain text to a very rich formatting, if so desired. A few types of PDF
annotations are understood by pdfpc and will be automatically imported and displayed. The PDF annotations
can be made using many PDF editors and even viewers; when using LaTeX, the pdfpc package (see below)
provides a convenient macro. These "native" PDF notes cannot be edited in pdfpc.
In addition, while in the presentation mode, pressing 'Ctrl + n' will allow you to take or edit notes for
the current user slide. To exit the note editing mode, press the Escape key. These notes are stored in
the .pdfpc file. They take precedence over the native PDF annotations, i.e., if a user-provided note
exists for a given slide, any PDF annotations on that page will be silently ignored. While editing a
note, the normal keybindings are disabled, e.g., you are not able to change slides.
Although mixing the two types of notes is possible, for a given presentation one will likely want to have
either only the "native" notes (produced by the same PDF authoring software used for making the slides),
or only the "pdfpc" ones.
Overview mode
Pressing the Tab key enters the overview mode, where thumbnails of the slides are shown in a grid. You
can select a slide to jump to with the mouse or with the arrow keys. You can also define overlays and
the end slide (see next sections) in this mode. Press Escape to exit the mode without making an change.
Overlays
Many slide preparation systems allow for overlays, i.e. sets of slides that are logically grouped
together as a single, changing slide. Examples include enumerations where bullet items are displayed one
after another, or rough "animations", where parts of a picture change from slide to slide. Pdfpc includes
facilities for dealing with such overlays.
In this description, we will differentiate between slides (i.e. pages in the PDF document) and "user
slides", that are the logical slides. The standard forward movement command (page down, enter, etc.)
moves through one slide at a time, as expected. This means that every step in the overlay is traversed.
The backward movement command works differently depending on whether the current and previous slides are
part of an overlay:
• If the current slide is part of an overlay we just jump to the previous slide. That means that we are
in the middle of an overlay and can jump forward and backward through the single steps of it
• If the current slide is not part of an overlay (or if it is the first one), but the previous slides
are, we jump to the previous user slide. This means that when going back in the presentation you do
not have to go through every step of the overlay, pdfpc just shows the first slide of each overlay. As
one typically goes back in a presentation only when looking for a concrete slide, this is more
convenient.
The Shift + Page up/down key combinations work on the "user slide" basis. You can use them to skip the
rest of an overlay or to jump to the previous user slide, ignoring the state of the current slide.
When going through an overlay, two additional previews may be activated in the presenter view, just below
the main view, showing the next and the previous slide in an overlay.
Pdfpc tries to find these overlays automatically by looking into the page labels in the PDF file. For
LaTeX this works correctly at least with the beamer class and also modifying the page numbers manually
(compiling with pdflatex). If your preferred slide-producing method does not work correctly with this
detection, you can supply this information using the 'Ctrl + o' key for each slide that is part of an
overlay (except the first one!). The page numbering is also adapted. This information is automatically
stored.
End slide
Some people like to have some additional, backup slides after the last slide in the actual presentation.
Things like bibliographic references or slides referring to specialized questions are typical examples.
Pdfpc lets you define which is the last slide in the actual presentation via the 'Ctrl + e' key. This
just changes the progress display in the presenter screen, as to have a better overview of how many
slides are left.
Page transitions
Pdfpc supports almost all standard animated PDF page transitions: blinds, box, cover, dissolve, fade,
glitter (except the diagonal one), push, split, uncover, and wipe, including various alignments, angles,
and directions (where applicable). The transitions are enabled only for sequential (either forward or
backward) movement; in the later case, the transition is "inverted".
Advancing slides automatically is also supported.
Movies
Pdfpc can play back movies included in the PDF file. Movies may be started and stopped by clicking
within their area. For the presenter, a progress bar is drawn along the bottom of the movie. This
expands when the mouse hovers over it, allowing one to seek by clicking or dragging within the progress
bar. Switching slides automatically stops playback, and movies will be reset after leaving and returning
to a slide.
Movies may be included in PDF files as "screen annotations". pdfpc does not yet support options that
modify the playback of these movies. In LaTeX, such movies may be added to a presentation with the
"movie15" or "multimedia" package. Note that the poster, autoplay, and repeat options are not yet
supported. (Also, run ps2pdf with the -dNOSAFER flag.)
As a perhaps simpler option, pdfpc will play back movies linked from a hyperlink of type "launch". A
query string may be added to the URL of the movie to enable the "autostart", "loop" and "noprogress"
properties, if necessary. (E.g., a link to "movie.avi?autostart&loop&noprogress" will add a video that
starts playing automatically, loops when it reaches the end, and does not show the progress bar.)
In LaTeX, such links are created with
\usepackage{hyperref}
\href{run:<movie file>}{<placeholder content>}
The movie will playback in the area taken by the placeholder content. Using a frame of the movie will
ensure the correct aspect ratio.
See our website ⟨http://pdfpc.github.io/demo/pdfpc-video-example.zip⟩ for a full example.
See the bugs section for further information.
Pointer mode
If needed, it is possible to turn on a pointer which draws a red (by default) dot in the place pointed by
mouse cursor on both presenter and presentation screens. It is also possible to increase and decrease the
pointer size. Additionally, when the pointer is enabled, it is possible to highlight some area of the
current slide using the drag mouse motion. The area outside the selected region will be dimmed. You can
zoom in the selected area by pressing 'z'; press 'Escape' to exit the zoom mode. You can highlight
another region while zoomed in, but there will be no further action on pressing 'z'. Drawing is also
disabled in this mode.
Spotlight mode
Spotlight mode is similar to the pointer mode: a circular area that moves with the mouse and can be
adjusted in size, but instead of highlighting the spot by a different color, it shades the background.
Drawing mode
It is possible to turn on a mode which allows drawing over slides with the mouse cursor or a connected
tablet. When drawing mode is enabled, drawings can be made on the presenter screen. A separate drawing
will be kept in memory for each slide (based on user slide numbers, so consolidating overlay slides).
Drawings are presently not saved between sessions.
In the drawing mode, there are two drawing tools, a pen and an eraser. An indicator in the bottom-left
corner of the presenter screen will indicate which is active. When in the pen mode, the color and size of
the pen will be indicated by the cursor. The pen size can be increased or decreased using hot keys
specified in the key bindings. When the eraser tool is active, the size of the cursor indicates the
amount to erase.
The color of the pen can be changed through key bindings or using the toolbox.
If you are using a tablet, the pen or eraser tool will be selected based on whether the tablet reports a
pen or eraser input device is being used, overriding the normal selection of the drawing tool. Also for
pressure-sensitive input devices, the pressure will affect the line width and the eraser size. Both
these features can be disabled in the configuration file, if desired.
Monitor Plug and Play
Pdfpc can handle monitor plug and play. E.g. if pdfpc was started before the presentation screen was
attached to the computer, pdfpc can create and show the presentation screen after the second screen was
attached. This allows the user to rehearse the slides and switch to a normal presentation without having
the full setup at the computer in advance.
pdfpc files
Notes, user-defined overlays, and some additional information is stored in a file with extension "pdfpc".
When pdfpc is invoked with a PDF file, it automatically checks for and loads the associated .pdfpc file,
if it exists. This means that you normally do not have to deal with this kind of files explicitly.
Beside internal configuration, the following command-line options are saved in the pdfpc file for later
usage:
• duration
• end_time
• last_minutes
• notes (position)
• page_transition
• start_time
Appearance
With GTK3 it is possible to modify the appearance of pdfpc. There are two locations where pdfpc is
looking for files. The default location is /usr/share/pixmaps/pdfpc/pdfpc.css. It can be copied to
$XDG_CONFIG_HOME/pdfpc/pdfpc.css and modified to the user's liking.
The geometry of various views (the current/next etc slide) in the presenter window can be adjusted at run
time in the "Customization" mode, which is activated by pressing Shift+c. In this mode, mouse-draggable
handles will appear. Exit the customization with Escape.
Desktop integration
Pdfpc provides a DBus interface that appears on the session bus as io.github.pdfpc. Other applications
can, in particular, execute any action listed by --list-actions. It is also possible to control pdfpc
from the command line (and write shell scripts) using the dbus-send(1) utility. For example, to advance
to the next slide, run
dbus-send --type=method_call --session --dest=io.github.pdfpc
/io/github/pdfpc io.github.pdfpc.TriggerAction string:next
For actions that require an argument, use TriggerActionArg, e.g.,
dbus-send --type=method_call --session --dest=io.github.pdfpc
/io/github/pdfpc io.github.pdfpc.TriggerActionArg string:switchMode
string:pointer
In addition to TriggerAction*, the pdfpc DBus interface exposes the GetNotes method, three properties
(NumberOfOverlays, NumberOfSlides, Url) and two signals (OverlayChange and SlideChange).
LaTeX package
A tiny LaTeX package is available for pdfpc at CTAN. It provides a convenient way to specify notes and to
define certain meta properties of the presentation. For a full documentation, please consult the pdfpc
package documentation. You can open it with:
$ texdoc pdfpc
BUGS
Bugs can be reported at our issue tracker ⟨https://github.com/pdfpc/pdfpc/issues⟩.
The LaTeX package "hyperref" produces buggy results when using with beamer notes. It is recommended to
use the "multimedia" package instead.
ACKNOWLEDGEMENTS
pdfpc was previously developed by davvil ⟨https://github.com/davvil/pdfpc⟩.
pdfpc is a fork of Pdf Presenter Console, available online ⟨https://github.com/jakobwesthoff/
Pdf-Presenter-Console⟩.
SEE ALSO
pdfpcrc(5)
There are several other programs with similar functionality.
impressive(1) has nice transition effects.
hpdfp(1) is the Haskell PDF Presenter ⟨http://michaeldadams.org/projects/haskell-pdf-presenter/⟩ program,
which packs an amazing level of functionality into not many lines of Haskell.
pympress(1) is a little PDF reader written in Python ⟨https://github.com/Cimbali/pympress⟩ which handles
dual screens and beamer notes.
dspdfviewer(1) is a specialized Dual-Screen PDF Viewer for latex-beamer ⟨https://github.com/dannyedel/
dspdfviewer⟩ for beamer-produced wide PDF with notes on the right.
Many PDF viewers have full-screen presentation modes, but without dual-monitor preview or notes or a
timer. These include zathura(1), evince(1), and okular(1).
PDFPC(1)