NAME

       fence_rcd_serial - rcd_serial fence agent

DESCRIPTION

       fence_rcd_serial  operates  a  serial  cable  that  toggles a reset of an opposing server using the reset
       switch on its motherboard. The cable itself is simple with no power, network or moving parts. An  example
       of  the  cable is available here: https://smcleod.net/rcd-stonith/ and the circuit design is available in
       the fence-agents src as SVG

       fence_rcd_serial accepts options on the command line as well  as  from  stdin.  Fenced  sends  parameters
       through  stdin  when it execs the agent. fence_rcd_serial can be run by itself with command line options.
       This is useful for testing and for turning outlets on or off from scripts.

       Vendor URL: https://github.com/sammcj/fence_rcd_serial

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -m, --method=[method]
              Method to fence (onoff|cycle) (Default Value: cycle)

       --serial-port=[port]
              Port of the serial device (Default Value: /dev/ttyS0)

       -q, --quiet
              Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       -v, --verbose
              Verbose mode. Multiple -v flags can be stacked on  the  command  line  (e.g.,  -vvv)  to  increase
              verbosity.

       --verbose-level
              Level  of  debugging  detail in output. Defaults to the number of --verbose flags specified on the
              command line, or to 1 if verbose=1 in a stonith device  configuration  (i.e.,  on  stdin).

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --disable-timeout=[true/false]
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 5)

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 2)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 1)

ACTIONS

       reboot Reboot machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       manpage
               The operational behavior of this is not known.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       method Method to fence (onoff|cycle) (Default Value: cycle)

       serial_port
              Port of the serial device (Default Value: /dev/ttyS0)

       quiet  Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.

       verbose
              Verbose  mode.  Multiple  -v  flags  can  be  stacked on the command line (e.g., -vvv) to increase
              verbosity.

       verbose_level
              Level of debugging detail in output. Defaults to the number of --verbose flags  specified  on  the
              command  line,  or  to  1  if verbose=1 in a stonith device configuration (i.e., on stdin).

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing is started (Default Value: 0)

       disable_timeout
              Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 5)

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 2)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 1)

fence_rcd_serial (Fence Agent)                     2009-10-20                                     FENCE_AGENT(8)